Window Regulator Replacement | Honda Accord
Тәжірибелік нұсқаулар және стиль
Did the window motor on your 2003-07 Honda Accord stop working? This easy DIY repair will get them working again with only a few tools and 30-45 minutes of your time.
The only tools required are:
Phillip’s head and flat head screwdrivers, a ratchet, 10mm socket, socket extension, a thin pry tool or putty knife, painter's tape or masking tape, and wire cutters.
The replacement regulator assemblies for 2003-07 coupe (2 door)…
Driver side: amzn.to/3LbcAqU
Passenger side: amzn.to/39pDQVu
(ad)
2003-07 sedan (4 door)…
Driver side: amzn.to/3waeHH0
Passenger side: amzn.to/39Nn2Yr
Left rear: amzn.to/3wbnqZs
Right rear: amzn.to/3McFfNx
(ad)
0:00 Tools Required
0:40 Remove Interior Panel
1:56 Remove Old Window Regulator
2:54 Transfer Bolts to New Regulator
3:09 Install New Window Regulator
3:47 Operational Test
3:57 Reinstall Interior Panel
Пікірлер: 14
perfect tutorial gained a subscriber
@FixandMaintain
2 ай бұрын
Thanks!
This video was a breath of fresh air - paced exactly as I need. So many of the other videos are long, distracted and overly wordy with lots of "asides". I'd bet $5 you organized your thoughts in writing before filming, and you stuck to your notes. Thank you!
@FixandMaintain
8 ай бұрын
Thank you! Glad to be able to help. So, I actually don’t write down anything at all! I film everything first, then record the voiceover one sentence at a time as I edit. It’s a long, slow process, but helps me keep the edit condensed as well as making sure I’m using the correct terminology for everything.
Really concise guide. Can't believe you don't have more upvotes. You stay right on subject with no fluff. Not sure if this is the fix I need yet. Bit more troubleshooting, but I suspect regulator because there's power but it won't budge with either switch/button. Thanks.
@FixandMaintain
Жыл бұрын
Thanks, glad to be able to help!
Appreciate the video man, nice and simple straight to the point!
@FixandMaintain
Жыл бұрын
Thanks!
Excellent instructions, Thank you!
@FixandMaintain
Жыл бұрын
Glad to be able to help!
Thanks‼️ This is a great step by step video‼️
@FixandMaintain
2 жыл бұрын
Glad to be able to help!
I cut the cable and the window still wouldn’t go down. After an hour more of trying to figure out why, I jiggled it around a bit and it finally git past the point it was getting stuck at. I think it was getting stuck somewhere in the rubber track. I probably shouldn’t have removed the four regulator screws before cutting the regulator/motor cable because the window track couldn’t track straight after I removed those screws.
@FixandMaintain
3 ай бұрын
So you ended up removing all 7 bolts before cutting the upper cable? The 4 bolts on the regulator track are definitely helpful to keep everything aligned before lowering the glass!