I replaced the original Sig grip on my 365 with the new Wilson Combat module last night. Huge improvement.

@RidersRange

2 жыл бұрын

I agree. Thanks for watching.

@TheReal_FJB

2 жыл бұрын

Did you go regular 365 Wilson grip or the 365xl grip ?

@ptortland

2 жыл бұрын

@@TheReal_FJB Regular 365. I don't own the XL model.

@jagpilotohio

2 жыл бұрын

@@ptortland he’s asking because the the XL grip module works on the standard 365. The problem is your mags won’t work. That’s the dilemma I’ve had. I don’t want to buy new mags but I think I’d prefer the bigger grip module.

@3nigmaG

2 жыл бұрын

@@jagpilotohio thank you for this comment. I was kinda confused if the Wilson p365 x/xl will fit my standard p365. Now I need to figure out the holster will fit the Wilson module.

This is exactly what this pistol needed. I have Wilson Combat grip modules on all my P320s and they are fantastic. Thank you very much for sharing.

@RidersRange

2 жыл бұрын

As always, thank you for watching.

Just installed my WC grip module on my P365X and I love it. Feels so much better than the original. And for $65 you can’t beat it. Definitely gonna look into those baseplates you have. Really completes the whole look! Awesome video brother 🤙🏼

@RidersRange

2 жыл бұрын

Thank you for watching and commenting.

@memags

2 жыл бұрын

@@RidersRange what base plates are those ? Looks great

This man has the patience of a saint to answer every single question, whether repeat (and there are lots of those) or not. I haven’t tried the Wilson Combat grips but I quickly changed out the stock grips on all of my p365s to Icarus Precision modules once I found them last year. They are perfect for me without becoming too bulky/sticky like the Hogue. There is some added weight due to the metal vs stock polymer but I do wonder how it would compare to the Tungsten weights in the Wilson grip. I don’t know how anyone can comfortably shoot with the stock p365’s thin grip. Every student in my class has trouble with it, especially if it’s a first gun for them. At one point, I started bringing Hogue grips to class.

@RidersRange

2 жыл бұрын

Thanks for watching and adding your thoughts.

Great video, I appreciate that you took the time to measure the circumference so you could give an objective comparison.

@RidersRange

2 жыл бұрын

That's the nerd in me. Thanks for watching and commenting.

I have added the Wilson Combat XL grip module to my SAS, and I was also able to slip on the Hogue rubberized grip on top of the Wilson grip. And now it feels like a butter. It now fully fills in the concavity in my hand that occurs when one grips something. I am a hobbyist knifemaker, and when knife makers construct handles, considering the palm swell is an important factor for proper ergonomics, yet precious few gun manufacturer seem to consider that.

@RidersRange

Жыл бұрын

I'm guessing it was a struggle to get the Hogue on the Wilson grip module.

@pedro1970maya

Жыл бұрын

@@RidersRange I thought it would be brutal, but it really wasn't. It was simply a question of stretching it just a little bit on one side and scooting it up a millimeter, then alternating and doing the same on the other side, until it touched up on the beavertail. It took me perhaps three to five minutes, and required only a moderate amount of patience. The only thing I had to be careful of is either edge of the magwell, which are a little bit sharp, so I made sure I stretch the rubber over that first. I know the Wilson grip is bigger and has a little bit more texturing, but I honestly had no more difficulty than putting it on the factory grip.

@pedro1970maya

Жыл бұрын

@@RidersRange kzread.info/dash/bejne/q39nrbmrhru9irA.html

Wilson combat grip module is probably the best addition I think you can do for a Sig 365XL

@RidersRange

Жыл бұрын

I agree. Thanks for watching.

I have short fingers and the P365 series grips are the most comfortable and best fitting of any pistol I've ever held. Good video.

@RidersRange

2 жыл бұрын

Norm, we live in great times where everyone is bound to find something what works best for them. The days of one-size-fits-all are gone (except for government programs 😢). Thanks for watching.

I 100% agree I have the Wilson combat module on my 365XL and my 320X compact.

@RidersRange

2 жыл бұрын

Thank you for watching and commenting.

Great review. I added the Houge grip to my XL based on your previous comments. Now I guess I am looking at Wilson. I love their P320 grip.

@RidersRange

2 жыл бұрын

Tommy, if you love the Wilson P320 grip, I'm sure you'll be happy with the P365 grip. Thanks for watching.

Huge improvement over the factory frame. Looks a lot cooler too, which is obviously the most important part lol. I have a Tactical Development base plate for my 15 round mag, but I may have to pick up one (or three) for my 12 rounders.

Consider the Armory Craft extended magazine release and the MagGuts 12+2 magazine internals. I don't usually mess with magazine internals, but decided to give them a try. I tested my 12 round SIG mags with the MagGuts and the Tactical Development MagGuts Compatible Pro Ledge floorplates for XL 12 round magazine. Entirely reliable.

@RidersRange

2 жыл бұрын

The AC extended mag release is on my list to get. Thanks for the info on the MagGuts internals. And thanks for watching.

You sound so much like Massad Ayoob and this being about Wilson Combat I just assumed you were, lol.

I have a wilson grip module for my 365. I installed the zev extended mag release. It makes a huge difference

@RidersRange

2 жыл бұрын

I may have to look into the ZEV mag release. Thanks.

Excellent review. Thank you for sharing the measured grip circumference. Hard to think of anything from Wilson Combat that isn't top shelf.

@RidersRange

2 жыл бұрын

I just ordered the Tactical Development mag bases that will go perfectly with the Wilson grip module. Thanks for watching.

I like the short grip on the p365, keep pinky under it while shooting and like the flat 10 round mag instead of stubby extension one for tighter conceal pocket carry and low weight.

@RidersRange

Жыл бұрын

The P365 is a good choice for concealed carry, but remember, your little finger is very important for recoil control. Pretty hard to do with the flush mag.

Mine looks just like this one with the exception of the manual safety. Great shooting gun.

@RidersRange

2 жыл бұрын

Thanks for watching.

Nice clear review with enough information and facts. Well done. The mag release Wilson provides is a stock SIG part so of course it wouldn’t stick out further on a bigger grip. The tungsten weighs will fit the XL grip. I doubt that they will make longer, heavier ones specifically for the longer grip.

@RidersRange

2 жыл бұрын

Good points. Thanks for watching and commenting.

Rider - TacDev now has the WC 15rd baseplate available. Have one on order. They also have them for the 12rd. Looks like they improve the excellent WC grip module even more. All the best and keep those videos and great info coming.

@RidersRange

2 жыл бұрын

I'll have to look into those. Thanks for watching and commenting.

I put an Armory Craft Mag Release Button on mine, looks (checkered) and works great.

@RidersRange

2 жыл бұрын

I like Armory Craft products, so I'll have to look into the mag release. Thanks for the tip, and thanks for watching.

@MrPerry61

2 жыл бұрын

I have the mag pinky extension they make. love them.

@elvernejorgensen5706

2 жыл бұрын

You wouldn't remember me, but I worked at MPEC, but I remember you!

@RidersRange

2 жыл бұрын

It's been a LONG time since I was in there. I was saddened to learn of Bill's passing a couple years ago.

That ridge that protects the mag release is crucial for a carry gun. All carry guns should have it. You’re more likely to accidentally bump your mag release with the gun in the holster than to need a speedy reload.

@RidersRange

2 жыл бұрын

That's the purpose, but in a properly designed holster, inadvertent mag release isn't a problem.

Great video, thanks for sharing! I was curious about the grip module, but haven't been able to actually find one in person.

@RidersRange

2 жыл бұрын

I haven't seen the grip modules in any gun store, so I ordered directly from Wilson.

I believe this is Masaad Ayoob’s backup account. Lol. Voice is identical and even the humor is the same.

@RidersRange

2 жыл бұрын

Being mentioned in the same sentence with the great Massad Ayoob is one of the highest compliments. Thank you for watching.

I use the Hogue sleeve on the 3 P365’s pistols in my safe. I’m going into year 2 of carrying a revolver, so I probably won’t invest in the WC grip module. It wouldn’t be a shocker if WC offered different sized mag releases. Thanks for Sharing! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸

@RidersRange

2 жыл бұрын

I had the Hogue HandAll sleeve on both my P365 and the XL. While the Wilson grip is a tad smaller than the Hogue, I like the feel a little better.

Vuurwapen mag release w/ Wilson grip module created the perfect combo for me.

@RidersRange

2 жыл бұрын

Thanks for the suggestion. I never heard of that company, but I looked them up and the mag release looks promising. Too bad they are out of stock.

I just ordered the grip and the trigger from armory craft thank you for this review it was very helpful

@RidersRange

2 жыл бұрын

Jeff, thanks for watching.

I just ordered the Hogue, hope it does the job. Thanks for the review. I wish WC would make the XL grip full length, to the end of the muzzle and put a picatinny rail on it.

@RidersRange

2 жыл бұрын

Thanks for watching and commenting. The "rail" on the P365XL is proprietary, so I'm just guessing that Wilson has an agreement with Sig to not change that part of the grip module.

I just ordered two :) one for my 365 and another one for my 365XL :) Thanks for the video!

@RidersRange

2 жыл бұрын

I'm considering one for my regular 365, also. Thanks for watching.

Wilson Combat to the rescue indeed.

@RidersRange

2 жыл бұрын

Yes indeed.

Just swapped mine today and it feels great well see how it shoots

@RidersRange

2 жыл бұрын

Thank you for watching.

Thanks for this video. Since I bought my 365XL last year I was disappointed with the grip & have been shopping a custom grip module. I actually have another browser open ready to buy the Wilson grip......you should get a commission.

@RidersRange

Жыл бұрын

I should add up all the comments where a viewer said they were going to buy the grip module, then send a bill to Wilson. Thanks for watching and commenting.

So I received and swapped out my grip on my XL with the Wilson Combat grip. True enough in terms of circumference it’s in between the stock Sig grip and one with the Hogue HandALL beavertail grip sleeve on the stock Sig grip. I am going to take it to the range to see how it feels and more importantly shoots. However in the back of my mind, I am considering slapping a Hogue grip sleeve to the WC grip. I’ve seen a couple of others do this and while one loses out on the aggressive texturing and good WC looks the overall circumference improves slightly further and a tad closer to that of a p320 Compact. We’ll see… either way we can’t go wrong. Right off the bat I dig the enhanced 1911 beavertail tang and the improved magwell not to mention that I am also intrigued in the near future with the concept of the tungsten rods that can be inserted into the grip.

@RidersRange

2 жыл бұрын

Thanks for watching and adding your thoughts. It was difficult to get the Hogue on my 365XL grip, so I can only imagine how hard it would be to get it on the Wilson grip. After putting 54 rounds through mine, I'm happy with it as is.

I greatly appreciated this brief review especially since you made plenty of mention in the Hogue HandALL beavertail grip sleeve that many of us went ahead and installed as soon as we purchased our p365 and an XL in my case. I went ahead and ordered the WC grips a few days ago and I figure that if it is as good and/or perhaps a better feeling grip then when I have the Hogue HandALL beavertail grip sleeve on then it will be worth it.

@RidersRange

2 жыл бұрын

The Wilson module is a compromise between the girth of the original grip and the Hogue HandAll. I put several mags of ammo through it the other day and I really like the texture and how it handles overall. Thanks for watching.

Forgot: Buy this grip, and you'll have more than a carry gun - you will enjoy it as a range shooter, too.

Looking forward to the update after you try it out and additional thoughts!

@RidersRange

2 жыл бұрын

JB, I took it to my local range and put 100 rounds through the gun. A couple of the store employees shot it, also. We all concluded that it fits the hand better and feels better than the stock grip when shooting. I have not committed to a range review - so many guns, so little time - but I added it to my list of possibilities this spring. Thanks for watching.

@JB-wm4fk

2 жыл бұрын

@@RidersRange Awesome! Thanks for the update. Ordering one for myself. BR

I thought I was listening to Paul Harvey..gonna subscribe just to hear this guy talk

@RidersRange

Жыл бұрын

Thank you for watching and for the kind voice comparison to the late Paul Harvey.

Wilson does sell the Grip Weight Kits for them but they are out of stock. ARMORY CRAFT does sell them also..Tungsten Weight Kit for Wilson Combat.

@RidersRange

2 жыл бұрын

Bill, they list the weights for the regular 365 only, not the XL, and they are out of stock. My trigger is Armory Craft, so I'll have to check them out for weights.

I think Sig is working together with WIlson Combat to make us spend more American Rubbles.

Thanks I was thinking about this one. Considering making my p365 into a spare p365xl.

@RidersRange

2 жыл бұрын

The 365 upper on the 365XL grip module makes the new P365X. Thanks for watching.

Very timely. I was wondering myself About the size differences between the Hogue grip, and the Wilson Combat module.

@RidersRange

Жыл бұрын

Thanks for watching.

just ordered one for my 365XL . you may want to check with them again about the tan grip with manual safety slot, they had them when I ordered

@RidersRange

2 жыл бұрын

I just checked the Wilson website again and they still don't list the tan grip for either the 365 or the XL with the manual safety - black only.

These are out of stock pretty much everywhere. Wish the rails extended all the way to the end for the XL's.

@RidersRange

2 жыл бұрын

This was listed as out of stock when I ordered it from Wilson, but it showed up less than a week after I placed the order.

Just replaced the P365 stock grip with the WCXL with tungsten weights included. It has a good heft to it with the added weights although I think it would have been better if the weights were molded into the frame by WC. The aggressive texture on the back and fore straps feels good in hand. The WC grip feels just a little stronger than the Sig original. The WC grip has a wider diameter than the original but not with the original and Hogue grip cover. The Hogue grip is the size (or larger still) that WC should have been trying for. The shape of the WC grip feels like it was designed with one handed shooting in mind. Given the smoothness of the trigger guard and the indent for the thumb rest, I question if two handed shooting was even considered. The dovetail is okay but nothing to rave about. I haven’t taken it to the range yet, maybe actually shooting it will surprise me and change my mind. Having used the Walther PPS, this is a failure.

@RidersRange

2 жыл бұрын

Javora Tree, thank you for watching and adding your thoughts. You may want to pass your thoughts on to Wilson. If you select your grip module and scroll down to the bottom of the page, there is a place where you can leave a review.

@javoratree3861

2 жыл бұрын

Update: Having taking it to the range, I can say that it shoots better than the original Sig grip. Pleasantly surprised by this as I was ready to sell it. Still believe that the WCXL is vastly inferior to the Walther PPS. There is a lot more that Wilson Combat should have done. But it works well enough for now until I can find something else.

Gree. Just got a couple Wilson Combat 365XL grip modules and they feel like velcro for my hand. I wear a size large glove but have average finger and hand thickness so the XL grip module has always felt a little thin. Just got a black one and have an FDE shipping soon. Optics Planet has black and will soon have FDE. I gave up a custom stippled grip module with stippling all the way up the back strap and beavertail. The Wilson Combat version just feels better. I see you're an XL Tactical base plate fan as well.

@RidersRange

2 жыл бұрын

Tactical Development now has mag base plates specifically designed for the Wilson grip module. I just ordered a few. Thanks for watching.

@XrayMike17plus1

2 жыл бұрын

@@RidersRange Well... that was fast. Only FDE left - no black. I'll check back. I have their 'old' style base bads for 12 and 15 round sig 365XL mags. They're excellent and the 12 round pads look great with the WC grips.

@RidersRange

2 жыл бұрын

I ordered two of the TD mag bases for the Wilson grip in black and one in FDE for my 15-round mag - only because I wanted one and they didn't have black in stock. They should be here in a couple days.

@XrayMike17plus1

2 жыл бұрын

@@RidersRange Thx, will do.

I have been thinking about doing a comparison of the various P320 grip modules, including the Wilson Combat. I didn’t know they made it for the P365/XL. That’s pretty cool. By the way, what trigger is that?

@RidersRange

2 жыл бұрын

Wilson just announced the P365.365XL grip module a little more than a week ago. The trigger is Armory Craft. As always, thanks for watching.

You should try the dpm recoil spring for the xl, definitely feels better afterwards and looks a little nicer too

@RidersRange

2 жыл бұрын

I may look into that. Thanks for the suggestion.

I do believe we have some worth while upgrade here. I have the Walther CCP. and a Tru Glo Pro sights that I installed and so it needs a much better trigger and if I can accomplish this I'll pass in the 365 which I want the X model. Do I see the newer Walther PDP ,those Walther's have so much to put on the table. But the 365 Wilson frame is a nice touch indeed. Thanks Stay Strong 💪🇺🇸

@RidersRange

2 жыл бұрын

Wayne, as always, thank you for watching and commenting. And Walther is one of the many brands I haven't added to the stable - yet.

I had the Hogue grip on mine too, but I ended up taking it off. I really liked the way it felt in my hand, but it seemed to interfere with my holster draw. Since it’s a carry gun, I like the skinnier grip because it seems to be easier for me to get a hold of when it’s in the holster. I can still shoot it good enough stock, but for me there’s a balance between being shootable and “holster draw-able”- if that’s even a word. This Wilson Combat grip module seems like a nice compromise, but I’ll probably keep what I got. For the money, I’d probably be better off buying ammo. Nice video!

@RidersRange

2 жыл бұрын

Mike, those are good points. For me, the Wilson grip module was entirely worth the cost. But you are right, you could buy three boxes of 9mm for about the same price.

Thanks for posting!

@RidersRange

2 жыл бұрын

Thank you for watching. I hope I adequately covered the important points.

Mine should be in today. Should have last week,ice storm. I have the xl. Thinking of getting a std. 365 magazine and buying the small frame. Then I probably need the weights then to compensate for the long barrel. Could be the perfect one....I have the max9 the hellcat also...the chase continues.....lol

@RidersRange

2 жыл бұрын

You are living proof of the formula "N+1".

@Rumpleskin

2 жыл бұрын

@@RidersRange you have to keep looking for perfection, till you can't look any longer...lol

@wbwills2

2 жыл бұрын

I want a standard module too .if the price isn’t too high on this one it looks good. Before seeing these was thinking about an exclusive slightly darker brown replacement offered by optics planet .try the contrasting colors look. & maybe even give stippling a shot on one of them. Both if it turned out to be a good thing. Honestly like the xl as is -stock.4-5 00 rounds through it right from the box with no cleaning other than wipe downs with remoil on a rag & dry toothbrush on sights & whatever I can reach easily without breaking it down. Did the same with a little LCP 22 light rack. Put a brick of old mini mags through it. Didn’t have any problems. Maybe five ammo related failure to fire. Darn good for rimfire.. Sig intended these guns to constantly scream for more. The money train must keep rolling! I get it. Poor little Ruger never made a peep. So of course I completely disassembled it and replaced the guide rod with a stainless steel and upgraded the main pin that holds the gun together that wasn’t necessary(380s.. necessary.. at least the pin) but better is better. Right.?. Could’ve been done with it at that point but couldn’t help myself. I had to have the replacement trigger that does away with the magazine disconnect on that pistol. The trigger itself was just fine, disconnects are a pain in the butt. Can’t stand them. On a rimfire especially.I couldn’t find my punches so since the back ordered Traeger was finally in the mailbox,I went at it with an old drill bit I should’ve been patient and gotten my tools. For some reason the trigger came un assembled. I did request and un anodized one , That’s why is my guess.To make a long story short, everything was going pretty good but mainly because of the unassembled trigger that I needed my tools to do properly, I messed up a roll pin, possibly damaged the trigger, attempted to align the soon to be damaged roll pin with a paper clip that was in arms reach. Which promptly broke off inside of the role pin. Have some new pins and everything is bagged and tagged but it’s in a cigar box and I haven’t shot it sense that evening. Learned a lesson. if a product comes in the mail in pieces that should be one completed unit , small pieces and springs with no directions and you don’t know what you’re doing, Stop and pick up the phone and get a replacement or something.Better yet just don’t start any job that is unfamiliar to you at 11 PM after a long day . But if you must, at the very least,have the right tools. Got the XL the next day. Unplanned, 2 had just come off the truck. I’ll get back to the LCPll soon. As a matter of fact I’m going to call them now and ask about that trigger and tell him what happened. Maybe they’ll send me another one. Or something.?.If not the other one I have is fixable. Never made a kydex holster before. The 22 is So small it’s going to be riding in a OWB with 4 spare mags. 51 mini mags on tap . ulti clips.xl ‘smaybe. Quick on and off and good for romping around in the woods, canoeing etc. grab it and go. Back to the Sig. don’t care for IWB very much. I believe the standard grip long slide version 365 Will be quite a bit better strongside or a little further back.10ish degree cant leather pancake. Not too bad as is and maybe I should give IWB a chance with such a small pistol. Holsters ughhh. Anyhow enjoy. I’m going outback to shoot a couple mags r now. It’s been a while and thinking about that 22 upset me a little bit. Need to knock the edge off a little and get my fix. Be safe

Looks good. I wish they would have made a 1913 rail for it instead of the proprietary rail.

@RidersRange

2 жыл бұрын

My guess is that Sig required their rail. However, there are many lights that will work on that grip module, with a list on the Wilson website.

every other video i watched, said the increased grip size was a detriment to the WC grip... I'm just sitting here thinking, THAT'S THE WHOLE REASON I WANT ONE. I have the same thoughts that the 365 is okay to shoot as it is, but if it was just a smidge bigger in the circumference, i could shoot it so much better.

@RidersRange

2 жыл бұрын

So far, everyone who has shot the 365 side-by-side with the original grip module and the Wilson module has preferred the Wilson. That slight additional grip circumference and contour does make a difference in "shootability" without detracting from concealability. Thanks for watching.

@ragnarokbladeworks

2 жыл бұрын

@@RidersRange thanks for that reply, that I think seals the deal for me. Going to order one as soon as I can 😀

@tomubl2655

Жыл бұрын

supposedly hickock45uses the 365 or 365xl as his carry. the reason i went with it was due to large hands like his. out of the box i can smack at 21 feet with iron sights. i push it back 9 more feet to 10 yards and my groupings fall apart. decided old eyes plus target acquisition, went to holosun and it seems to be getting me out there better, need more rounds. i hope the wilson doesnt give me a problem bringing the red dot over....good vid, like the preso, i liked and subscribed to this channel

@ragnarokbladeworks

Жыл бұрын

@Tom Ubl so, I have to say after having the wilson combat grip for a few months, it's NIGHT AND DAY difference in how much better it is over the factory grip. I went XL grip on my regular 365 slide, and it's incredible. No more snappy feel, I can drill the target at 30 feet now. I do plan on adding a dot sight on there this spring, I enjoy the speed of a red dot on my g19. The grip, even though XL size, also doesn't print any more than the regular frame did. Solid win with the Wilson frame. Especially for 60 ish bucks. 1000% recommend

Love your videos as always. I got one of these WC grips and it is an awesome upgrade. What magazine pinky extension are you using that is compatible with the WC grip?

@RidersRange

Жыл бұрын

The mag bases for the Wilson grip are from Tactical Development.

It would be nice if Wilson would actually stock these grips. Been sold out for months…

@RidersRange

6 ай бұрын

I'm guessing they are made in batches. You can subscribe to notifications so you can order as soon as they become available.

@Brown_Man_Adventures

6 ай бұрын

Just ordered mine yesterday they are back in stock

@handbeard

6 ай бұрын

Just bought one last night

@randymoreno9345

6 ай бұрын

Bought one 30 minutes ago. They are in stock in numerous places.

Just Got Mine Today and going to do the swap tomorrow... ';-)

@RidersRange

2 жыл бұрын

Let us know how you like after you shoot it.

Would you recommend the Sig P365 or P365XL with the "Wilson Combat" grip modules over the S&W Shield Plus for CCW? Considering both these pistols at this moment. Great video as always!!!

@RidersRange

2 жыл бұрын

Thanks for watching and commenting. I have both and I prefer the P365XL over the Shield plus, but that's just my preference. Your preference may differ.

Safety is dangerous brother.

@RidersRange

7 күн бұрын

How so??

@Civilian_Patriot

7 күн бұрын

@@RidersRange there are cases where spit seconds make a huge difference in life altering outcomes, unless someone has lots of training in high stress situations, I would recommend a striker fire with no safety or a DA/SA with no safety.

Is there an extended mag release that is compatible with this grip module? Thats one gripe i have w the sig factory mag release...i have to really break my grip and flip the pistol almost 90degrees to get a solid punch to the release button to get a clean mag release.

@RidersRange

Жыл бұрын

The mag release that is included with the Wilson grip module is a Sig factory item, so any extended mag release from Sig, Armory Craft, GrayGuns, etc., should work.

Why didn’t they modify the accessory rail

@RidersRange

2 жыл бұрын

I'm guessing Sig wouldn't let Wilson make any changes to their proprietary rail.

Is this hickock 45???

@RidersRange

2 жыл бұрын

Hickok45 it taller and has that Tennessee accent. But otherwise we could be brothers 😎 Thanks for watching.

Thanks for the video. Subbed.

@RidersRange

2 жыл бұрын

Thank you for watching and subscribing.

Good Video, Thanks! Will the 12-Round OEM Sig Mag's fit with the Wilson Grip? Do you think it's worth getting the Tactical Development Base Pads? I imagine they give you a little more grip for your pinky? Thanks again!

@RidersRange

Жыл бұрын

The OEM mags will fit, but there will be a gap at the rear of the baseplate/grip area. I highly recommend a mag baseplate that is designed to go with the Wilson grip module.

@Mike-ox1bu

Жыл бұрын

@@RidersRange Thank you very much for getting back to me. What do You think would be the best Base Plate to go with the Wilson Combat Grip?

So, is the 365XL your concealed carry preference? Just curious as I've looked through your channel and it seems like you have a plethora of subcompact pistols. I have a HK VP9 (full size) that I train with, compete with, and carry. However, I really want to get something smaller for IWB as it will be more comfortable and I will actually carry it more often (yes I am guilty of not always carrying due to comfort). The obvious choice for me would be the VP9SK since I am very confident with its big brother but I see you own one too so just wondering why you chose the Sig over the HK? Thanks.

@jonnyt16

2 жыл бұрын

Ah nevermind, just watched another video of yours that explained things. Staccato, Wilson EDC, etc. Would love to carry something like that but they're a bit out of my price range (looking for 1k and under). Anyway, great channel you have and keep up the good work!

@RidersRange

2 жыл бұрын

Looks like I don't need to answer this, as you already did. Thanks for watching.

Only one thing, while talking about the mag release you were referring to the stock grip but holding the hogue grip.

@RidersRange

2 жыл бұрын

Hmm...I'l have to go back and look at that. I guess that's one of the disadvantages of working off notes, rather than a script. Thanks for letting me know.

@skypallman6169

Жыл бұрын

You can order new magazine releases now for them

@sandogtjsandog4366

3 ай бұрын

The Hogue "grip" is just a rubber sleeve, which fits over the stock grip, there is no Hogue grip. Maybe you meant the stock grip vs. Wilson ?

I’m really enjoying mine !

@RidersRange

Жыл бұрын

Glad you like it.

You can use non manual safety frames. Just have to notch the frame. Super easy to do. I made mine single side safety that way. Message me if you want info on this as I have several pictures.

@RidersRange

Жыл бұрын

Not difficult. Thanks for watching.

Are the butt caps on the mags different as well or are those sig factory mags?

@RidersRange

2 жыл бұрын

The mag baseplates are from Tactical Development.

Thanks for the video. What trigger is that and do you like it better than the stock one? 👍

@RidersRange

2 жыл бұрын

Richard, that's an Armory Craft trigger. It only replaces the stock Sig trigger, not the trigger mechanism, so it doesn't lighten the pull, but I think it does feel better.

Mine is on its way and I actually think I'm going to like the mag release being a little tighter in profile. When carried IWB, it's been a problem for me. Often get's pushed and releases the mag. I've tried 3 different holsters and it still happens. Love the 365xl, but that is an issue.

@RidersRange

2 жыл бұрын

Chris, that may be why Wilson didn't offer an extended mag release. Thanks for watching.

Does the larger diameter grip help make the safety more ergonomic for you?

@RidersRange

2 жыл бұрын

I don't notice any difference with access to the safety with either grip module.

i bought a mcarbo titanium striker and then they start informing customers that there is some grit feel and some malfunctions. i bought the flat trigger from mcarbo with set screw tolerance for poundage and i think i might just go with your curved apex... we shall see.

@RidersRange

Жыл бұрын

Thanks for watching.

I hope P80 comes out with one of these. Their P320 grip module is my favorite

@RidersRange

2 жыл бұрын

It wouldn't surprise me if they did come out with one.

Did you get the weights? If not how does it feel without them?

@RidersRange

2 жыл бұрын

I didn't get the weights, but I'm very happy with how it shoots without the extra weight.

Thank you for the circumference dimensions. I ask on FB and got no help them emailed Wilson and got no help or dimensions. THANK YOU !!! Just curious did you put the Hogue on the Wilson and measure it ? I'd like to be around 5 3/4 to 6 inch mark. I think it may help my grouping.

@RidersRange

7 ай бұрын

I haven't tried the Hogue grip over the Wilson grip module. Getting it on the standard grip was tough enough. I can only imagine the frustration I'd go through if I tried to put it on the larger Wilson grip frame.

Nice upgrade. 👍👍

@RidersRange

2 жыл бұрын

Thanks. I put 54 rounds through it this evening and I'm very happy with the grip.

@jonathanl2748

2 жыл бұрын

@@RidersRange Glad to hear that the performance was good! Looks are nice, but a product needs to perform. Thanks.

The circumference of the grip and the spongy trigger have kept me from purchasing a Sig 365. Looks like Wilson has a solution to one of the obstacles. I noticed that you have a different trigger than factory, Could you eloborate?

@RidersRange

2 жыл бұрын

That's an Armory Craft trigger, though I didn't change any of the internals, so it's still a little "spongy".

Nice video thx

@RidersRange

Ай бұрын

Thanks for watching.

Have you checked out the icarus grip modules...they seem incredible

@RidersRange

2 жыл бұрын

I have and I like contour and the fact they are billet aluminum, but at $250 to $275, I haven't found a way to justify the cost. And right now they are sold out for the P365XL, plus a 4-12 week lead time for modules for the XL with a manual safety.

If you get the chance I wonder how the Icarus grip module compares ? I have the Hogue. Every mm counts, imo.

@RidersRange

2 жыл бұрын

I like the Icarus Precision module because it's made out of aluminum, not polymer, but at almost $300, buying one is not in the cards for me.

how do you like it compared to the hogue? im using the hogue and trying to figure out if the WC is worth the $$$.

@RidersRange

2 жыл бұрын

The Wilson grip module doesn't fill my hand quite as well as the Hogue HandAll, but to me, the Wilson feels better when shooting.

Looks great

@RidersRange

2 жыл бұрын

Feels great, also. Thanks for watching.

Does the WC grip take the Xmacro 17 rd mags like the standard grip does for the p365XL?

@RidersRange

Жыл бұрын

Any mags that fit in a standard 365 or 365XL frame should also work in a Wilson grip module.

@cdb3g

Жыл бұрын

@@RidersRange ok thank you for the information and the response

What base plate do you have on that magazine? Is it the 12 round mag?

@RidersRange

2 жыл бұрын

That's the 12-round mag with a Tactical Development base plate.

@robertlumsford4289

2 жыл бұрын

@@RidersRange thank you!

I also have the 365 xl with manual safety. Was it difficult to swap this over to the wilson combat with the safety? I haven't been able to find any videos of someone doing it with a safety quite yet.

@samprizzi1159

2 жыл бұрын

I am in your same situation and was wondering the same thing myself.

@matt3247

2 жыл бұрын

@@samprizzi1159 Hey I found a video with the manual safety. It's the same process, but here in the link to the video since you are in the same situation as well. Hope it helps! kzread.info/dash/bejne/aKlmq7GQf9yzY9o.html&ab_channel=AZTrigger

@RidersRange

2 жыл бұрын

@matt32 and @Sam Prizzi, you convinced me - I'll order one for my other P365 and do a video on the swap. Stay tuned. Edit: I just ordered one, but they are backordered. Keep watching.

Did you ever add the extended safety from Armory Craft?

@RidersRange

6 ай бұрын

I've been checking the Armory Craft website periodically and the safety has always been pending. I just now checked and I see the black nitride one is now shipping. Looks like I need to get one.

Thx for proving the gun was clear. We weren’t sure if you hurt yourself with a loaded gun prior to uploading and seeing the video…. I’m trying my best to be a smart a$$.

@RidersRange

2 жыл бұрын

If I forget the safety check in a video, someone will definitely comment. Thanks for watching and starting my day with a little humor.

I wish Wilson combat would make a grip mod like Icarus Ace makes a aluminum grip mod.

@RidersRange

2 жыл бұрын

The Icarus is nice, but pricy. I doubt Wilson would go that route, but one never knows. Thanks for watching.

I'm looking to make the switch on mine from no safety to adding the thumb safety. Does the WC come with the parts to add the safety?

@RidersRange

2 жыл бұрын

The Wilson grip module doesn't come with any parts other than the mag release.

@emblems4life726

2 жыл бұрын

I think it's only a 3 part kit to add the safety comprised of a spring, pin, and the ambi safety switch. I thought the cost was less than $30 (my guess). I purchased my 365x with safety because there is no trigger safety like the Shield Plus has.

@kennethgoodman633

2 жыл бұрын

@@emblems4life726 I ended up ordering the manual thumb saftey parts separately, it was pretty much plug and play

What trigger do you have there sir? Thank you.

@RidersRange

2 жыл бұрын

That’s an Armory Craft trigger.

How is the profile? I like the roughly 1 inch profile width for conceal carry. Is this the same?

@RidersRange

4 ай бұрын

The Wilson grip module for the P365XL measures 1.18" at the widest point of the gripping surface and 1.197" at the magwell. That is a hair wider than the factory grip, but it isn't any more noticeable when carrying concealed.

Did you ever make a video of you shooting it?

@RidersRange

2 жыл бұрын

I haven't made a shooting video since changing the grip. However, I need to do one since I just added a Wilson grip to my original P365. Maybe later this summer.

One of the things i do not like about the manual safety on the 365 is the other side pushes into my hand when activated. Just feels weird. Does this grip change the hand placement at all that might solve this? Or should i just shave down the ambi safety? Thanks

@RidersRange

Жыл бұрын

I shoot with a real high grip and I don't notice the right side safety pushing into my hand at all with the Wilson grip module.

What's going on with that magazine base plate? That doesn't look anything like the flat plate on my 365X.

@RidersRange

2 жыл бұрын

The mag baseplate is from Tactical Development.

@GladIfoundthis

2 жыл бұрын

I bought pinky extension plates from Armory Craft for my 10/12 round mags. Perfect for me big hands and Hogue grip.

@jeffreymelber9582

2 жыл бұрын

Hey Guys thanks for the leads. I ended up getting a mag extention from Tactical Development. They didn't have any black available so that's a little wonky. I ordered a grip module from Wilson even though they say sold out. I ordered it this past week and received notification yesterday that it's due to be delivered this Friday.

@calangel

2 жыл бұрын

@@jeffreymelber9582 you should've gotten the baseplate from MagGuts. I think it looks better than the TD version, plus it comes with a replacement spring and follower that turns your 12 round magazine into a 14 rounder that is easier to load.

@Elkmonger

2 жыл бұрын

I installed the Wilson grip today. It fits real nice it's a tighter fit than the stock and the grip is slightly larger. It feels real good. Haven't shot it yet. So far very nice and a little more aggressive stippling. Mine did not come with a mag release.

I use a Wilson grip module as well. good video. what red dot are you using?

@RidersRange

2 жыл бұрын

That's a Holosun 507K.

@jshannon5771

2 жыл бұрын

thanks,

@swampk9

2 жыл бұрын

@@RidersRange not just any 507K, but the first version with big buttons. Not easy to find now.

Curious, have you ever measured the circumference of the hellcat? I have the xl frame on order. I like the diameter of the hellcat. The standard and the xl are too small for comfort. Thanks

@RidersRange

2 жыл бұрын

I haven't measured the Hellcat. I don't own one, but I I have a friend who does. I'll try to remember to measure his next time he comes over.

@Rumpleskin

2 жыл бұрын

@@RidersRange thank you..I own one. I can measure it. I thought since you had measured the sig, maybe you had compared the two and I missed it. I guess I was being lazy..lol. thanks for all you do. To me the hellcat fits my hand better. I am looking forward to the Wilson frame coming in. Thanks again.

I liked the Hoge, just hated the middle finger/ring finger phallic job.

@RidersRange

2 жыл бұрын

The Hogue definitely didn't fit all hand sizes. Thanks for watching.

Thanks!

@RidersRange

Жыл бұрын

You are welcome.

what trigger is installed on that XL? thx

@RidersRange

2 жыл бұрын

The trigger is by Armory Craft and the mag bases are Tactical Development.

@Calvin1911

2 жыл бұрын

@@RidersRange Is there any utility of the AC trigger or is it for aesthetics?

Do you prefer this grip over the hogue grip?

@RidersRange

2 жыл бұрын

Marginal, but in general, yes. The Wilson grip doesn't fill my hand quite as much as the Hogue, but I prefer the way it feels when shooting.

what trigger is that? Thats very cool looking!

@RidersRange

2 жыл бұрын

Armory Craft.