Returned from the range after going through 200rds with my 365X with new WC grip module. I performed several drills and shot much better with the new grip module. Thank you Mr. wilson

@ShawnShipstad

Жыл бұрын

am right behind you- I put the Wilson P365 on the "Origional" model & I love it. The weights are worth it to me as well.

Thank you for this video that really talks about what the grip is like. Observant and thoughtfull just like all of your content. Im getting one for my 365 in 380. Trying to get the same optic too. Thanks for the info on DOT size too. Im trying to build a very accessible small gun for a lot of different people so your experience will be useful to me.

@AzayBae

Жыл бұрын

I’m interested in the same. I recently realized I have an astigmatism so I’m thinking of getting the 407k with a 6 MOA dot.

@AzayBae

Жыл бұрын

It’s been a while but I wanted to let someone else know for consideration. Primary Arms is making a 507k with their Chevron and the extra large circle to help with finding the dot.

Thanks like that tip with the tumb.. never thought of that.

Thanks for the show and tell! I'm starting to agree about the beaver tail grip on my cz75.

Putting your thumb on the top of the gun to help index your grip 👌. I’m going to try that out now!

I have the 365xl with Wilson Combat grip module plus weights, which is a huge improvement from stock, and I put the Empire Katana flared magwell on the grip module as well. I’ve been carrying a 365 for three years during the summer and a P229 Legion during the winter. Best Regards

@garytucholl7699

4 ай бұрын

I just got a WC XL grip module for my 365, and decided to go with the weights on this one (I also have an X with the WC XL module without the weights.) I honescsnt feel any difference in weight or balance between the two …

I just installed my wilson combat on my 365xl and I've been running the holosun 407k for 21/2 years now no problems with it.

I just got a p365 and i was considering one of these. Now im convinced

I run a similar setup. As you said the Wilson grip gives me a little more meat on the grip, it’s a little more of a round shape. Just enough. Better beaver tail to get up into as well.

I went with boresight razorback instead. Love it.

You can still comp it with the sig compensated slide, only downside is the slide is damn near comparable (price wise) to a buying another pistol

Finally! Someone who is using a BarrelBlok! I thought I was the only safety nerd who’s using one for videos other than John Correia. Good stuff!

@-hawtzauce-1108

Жыл бұрын

Don't Wana flag/shoot folks through the camera now...

@Alwayswatching8111

Ай бұрын

At least you know you’re a nerd

Zev makes a great mag button for the 365 series. It doesn't stick up higher so much as it's wider and closer.

Good info.

With my hand size the regular 365 is not big enough. I just purchased the this module for the wife's gun, feels excellent compared to the factory grip, now waiting for range confirmation. Trying to test out if this setup or a Glock 26 for my summertime carry will be the way to go.

Had for about 6 months going strong now. Funnily enough i lightly sanded down the backstrap grip just a tiny bit to make it a little less aggressive because itd get caught on my shirt while concealed and rip a ton of pinholes in my shirt.

I carried this pistol for 8 months edc love it. Addiding this lower brought new life into the gun. Slimmer for sure and has a more aggressive purchase. I agree worth it

@dilldowschwagginz2674

Жыл бұрын

I feel like the Wilson is noticeably thicker than the stock grip module. you said "slimmer for sure"

I've got vids on their 320 module which was game changing when I used to own such things before recession and c1984. 365xl is almost right but too thin high up in beavertail for me & 365s I feel like on draw it's canted not always centered in web of hand. If I found an xl used w module if it filled my hand better I'd consider it though lots of options nowadays

The WC grip module made a big difference for me on my P365XL. Still on the fence about them vs the X-module on my P320 tho.

I have really enjoyed your video instruction. I have the Razorback grip from Boresight Solutions in Florida for my Sig P365XL and found that it works well for me with the Hollosun 407k. BTW Can you recommend either a red/green dot or laser or laser saddle for a12 gauge shock wave?

@demonstratedconceptsllc4918

Жыл бұрын

Thanks! I prefer the primary arms SLX 1x prism in green for the shockwave right now.

I wish we could get a fix for the 43x grip squish. I can nearly fold mine in half with no mag in it lol

Yeah it’s great if you want to make it less concealable and feel like a mini 1911.

I think you should inquire about the boresight solutions mod! Can’t hurt to ask and it could turn out super cool and effective for you

I'm not sure about the 365, but the p320 Wilson grip is definitely worth the upgrade IMO.

I like mine. I wish they had eliminated the undercut and just run the same texture straight up the front of the grip. I think they kept the undercut just so it would work with all holsters...

How would you compare the recoil between the x and xl?

Love Boresight, but for the price, WC gets you 90% there for 1/3 the price (and are more rigid as you point out). The MACRO has no flex and I’m seriously thinking of cutting down one to hold the 12rd mag (14 with magguts)-will have to epoxy/JB Weld the backstrap on it. But for now I carry a macro slide in a WC as CCW and have another macro as HD.

@ameribrahim5405

Жыл бұрын

I'm planning the same set up with a manual safety. Is it an xl wc frame? . How does it look? Does it perform well?

What model number is this grip module?

so why do you need a spring replacement every once in awhile? Im about to buy a 365x and also buy this same grip module. Is this still the grip module that you use?

Honestly this is the reason I sold my XL. I hated the beavertail because it made the gun hard to get out of the holster, and the grip was too skinny and flexible, I couldn't get a good grip on it. If this grip module existed a couple years ago, I might still have my XL.

Do you carry with a weapon mounted light?

I have a stainless threaded barrel, holosun and the tan Wilson module on mine, love it

Do you have a link to get one of these? Which model is this?

What did you do to you slide stop?

I've been running the Wilson Combat module since shortly after it came out. The increased grip circumference helps me pull the trigger more consistently, the wider magwell helps with loading, and the texture is much improved. I also opted for the tungsten inserts. Overall, the P365XL still doesn't shoot "jUsT As gOoD" as a full size pistol (at least not for me) but it's close.

Has switching to the WC Grip affected how well your P365 fits in your Enigma?

@demonstratedconceptsllc4918

Жыл бұрын

Not at all. Same fit

How is this compared to a Glock 26 grip gen 3 ?

I probably missed it but the WC XL grip module fits the 365x pistol right???🤔

@demonstratedconceptsllc4918

Жыл бұрын

Yes

Hello sir what appendix holster are you using?

@demonstratedconceptsllc4918

5 ай бұрын

Phlster enigma express

I've got 2000rds through a 407K on my G48 MOS No issues so far. Not a single malfunction with my G48 either

@jijjr

Жыл бұрын

nice to hear considering that is my new setup on my 43xmos. went with the 407 green + chwps adapter plate. Also swapped out the front and rear irons with Night Fision optic ready stealth sights and the cowitness height is perfect, lines up level with the built in rear notch on the holosun.

I can't find a P365X grip module on the Wilson Combat site. They have a P365 and a P365XL but nothing for a P365X. 🤷‍♂️

@demonstratedconceptsllc4918

Жыл бұрын

The xl and x are the same grip module. 12rnd flush fit mags

Will the WC frame module still fit holsters with the regular P365 X frame?

@demonstratedconceptsllc4918

7 ай бұрын

All that I’ve tried

do i order the xl grip module if i have the x? cant seem to find the module for the x

@demonstratedconceptsllc4918

Жыл бұрын

All will fit gun. XL Takes 12rnd mags

o I can put my Sig P365X on a P365XL grip module? I am hoping.-It looks like what this guy is doing.

The factory 365 is too small in terms of circumference for my big hands. The WC is aalllllmost enough to make it shootable for me, definitely better than the others I've tried.

Which 9mm load do you prefer to carry?

@demonstratedconceptsllc4918

Жыл бұрын

All of the HST and Gold Dots perform well. Standard pressure 115GDHP does 14” penetration and full expansion out of a 365

@rickrobinson8417

Жыл бұрын

@@demonstratedconceptsllc4918 Awesome, thanks.

@pondacres

4 ай бұрын

Same here, HST standard pressure.

Does it fit into the holster after wc install?

@demonstratedconceptsllc4918

24 күн бұрын

Yes

Hey Hercules, you should probably get an Icarus aluminum grip. No mention of your holster fitment with the new module or the new 365x macro.

Is the xl module what I purchase for my x?

@demonstratedconceptsllc4918

Жыл бұрын

Yes

what spring change after 2k rounds?

@demonstratedconceptsllc4918

Жыл бұрын

Recoil spring

Did you go from the xl to the X ?

@demonstratedconceptsllc4918

Жыл бұрын

Yes

@TacticalJay.

Жыл бұрын

@@demonstratedconceptsllc4918 gotcha was the extra barrel length uncomfortable and neglible that you just wanted better overall concealment just wondering

Will it work on Sig p365 XMacro ? Ty

@308scoutrfl

9 ай бұрын

Only gheys carry the xmacro . So lame

Why the X over the XL?

@demonstratedconceptsllc4918

Жыл бұрын

If I can meet my shooting standards with both, carry comfort >shooting comfort.

I enjoy my Wilson Combat module. It saved my Sig from being sold and propelled it to the top of my carry line up. Prior to this upgrade, a stock G48MOS with a 507 was primary. I’ve been dueling the two against each other for over a year. I like the G48’s trigger better and shoot it a smidge better. The Sig is nicer to carry, allowing me to deep squat without hotspots with my current carry setup (Phlster Pro w/ DCC clips). The Wilson Combat module made the Sig a viable carry option for me. Your mileage may vary.

Stock module feels like shit, like a toy. Also the plastic scratches and scuffs if you even look at it. First day I had mine no joke I think I scratched it with a microfiber cleaning cloth.

Ok so if you have a stock p365 (not x or xl) can you buy a p365x slide cut for 507/407k and the WC grip module and you have this setup?

@demonstratedconceptsllc4918

Жыл бұрын

Your slide isn’t cut for optics?

@TheCalebOsborne

Жыл бұрын

@@demonstratedconceptsllc4918 nope. Just night sights. I think they introduced that option with p365xl first and then later did the p365x right? I'm still behind on my knowledge of the 365 series

@shootinbruin3614

Жыл бұрын

@@TheCalebOsborne All P365 slides, grip modules, and FCUs are compatible with one another. Although since you already have a slide you may want to consider having a machine shop cut it for the optic of your choice

Psssst….your tip is protruding

Am I imagining things, or is the Boresight Solutions module $310?? Lol

I don't see why anyone would buy the X frame/short slide instead of just grabbing the XL and calling it a day.

@308scoutrfl

9 ай бұрын

Because people buy what they want and don't care about your opinion

A suggestion….when the title of your video is for a grip module review, stick to doing a grip module review. If I want a review of your sights I’ll do a separate search for that.

@jordank9166

Жыл бұрын

Who hurt you?