As always, great video! Super informative. You'll enjoy making new parts even more now. It looks like a decent machine to get started. I've seen you already thought about the gas coverage on the second clip. That's definitely very important and probably takes a bit of practice getting used to with that type of machine. It's a good practice to no only keep the weld covered for a few seconds but also the tungsten electrodes and the filler rod. How are you sharpening your tungsten electrodes by the way? Did you 3D print that part? Enjoy your new welder and don't get discouraged by the initial practice it takes. It's well worth learning TIG for building the raddest savage :D

@HeavyMetalParkingSpot

10 ай бұрын

Thank you very much! So much to keep track of at the same time, but I try to remember the gas coverage. I think it's even harder to remember with this setup since I have to "flick off" the arc, there's no button to kill it. I'm still sharpening on my bench grinder. I have ordered small grinding wheels for my Dremel and I'm planing on printing some kind of contraption for it. But the bench grinder works surprisingly well actually. Even though I'm still terrible at it I already feel what an asset this will be. I already have a list of things I would like to make! 🔥

@MotoWrenchers

10 ай бұрын

@@HeavyMetalParkingSpot nice, I'm looking forward to all the parts you're gonna build with it. When using the bench grinder to sharpen the tungsten electrodes I find it very handy to use a cordless drill on the lowest setting to rotate them (you might already do that).

@HeavyMetalParkingSpot

10 ай бұрын

@@MotoWrenchers That is a very nice tip and did test it. But quickly found out that I'm most often too lazy to take out the drill. 😅

Very useful video, thank you !

@HeavyMetalParkingSpot

21 сағат бұрын

Thanks! Glad you found it helpful!

Well I'm sure you will be playing for a while .. new toy and all that lol . I'm sure it will be a great addition to the fabricating tooling in the shed and you will certainly improve on the gasless welds previously used . Once you master the basics on the tig your going to be able to do some nice neat welds . Enjoy playing Brother

@HeavyMetalParkingSpot

10 ай бұрын

Oh yeah, there has been some playing for sure! 😅 Still a long way to go before I master this machine, but I'm on my way. Thank you for your support! ✌️ I have some really exciting chopper content coming up soon, so look out for that! 🤘

No offence dude but did they really ask you to review the welder as you only have 676 sub? Thats cool if they did because you only here of companies aprotching big channels. You'll go far mate your vid was constructed very well!!! Subed👍👍👍

@HeavyMetalParkingSpot

4 ай бұрын

None taken! They did! I feel like I see many smaller channels reviewing stuff from Vevor (bigger as well of course), it might be part of their marketing strategy. I think it’s really cool, even though they are not a high-end brand, most of their stuff is good enough for us hobbyists. And getting that stuff in the hands of smaller creators I think enables them to make things they otherwise couldn’t. Sorry for the long reply and the Vevor chill, I’m not THAT passionated about that company. 😅

@jackofalltrades8394

4 ай бұрын

All good bro you'll go far your vids are out together very well keep up the good work brother👍an thanks for the honesty

@HeavyMetalParkingSpot

4 ай бұрын

Thank you very much! Have a great day! ✌️

Vet du om 16a säkring räcker för att köra svetsen på full effekt? 🧑‍🏭

@HeavyMetalParkingSpot

10 ай бұрын

Jag har en mycket högre säkring så det är inget jag har kunnat testa. Inte hittat någon information om det heller. Om du vet någon specifikation som skulle kunna hjälpa dig att räkna ut det försöker jag gärna leta upp den.

I just got my VEVOR MIG250 and it looks nothing like this one in the review video. I don't see mine on any KZread reviews. My MIG250 has SMAW (stick), Lift arc TIG, and MIG or FCAW. It came supplied only for MIG, no stinger or torch. Price naked like that was $204 shipped and taxed. It has one knob and two displays for current and wire speed. I have not figured out the wire speed (SAE or Metric) so there's that experiment yet to do.

@HeavyMetalParkingSpot

Ай бұрын

That sounds weird! I hope you figure the settings out!

Is it on par with the duty cycle of your hair iron? 😉 sorry, just jealous, I’m bald! For the advertised amps it’s much cheaper than traditional welder brands and all the accessories as bonus. Im thinking of pulling the trigger! 👍

@HeavyMetalParkingSpot

2 ай бұрын

No machine can compete with my hair iron, it's a mighty machine! 😉 Honestly, I'm still super happy with this machine. Handles everything I have thrown at it so far. Get it and weld something cool! ✌️

@wh0tube

2 ай бұрын

@@HeavyMetalParkingSpot thanks for the reply 🙏 that is the most useful information. To know that in medium/long term its been trouble free, rather than the usual unboxing type reviews gives me much more confidence. Cheers! 😊

@HeavyMetalParkingSpot

2 ай бұрын

@@wh0tube No worries! Been thinking about doing a little update video because I agree with you. Seeing just an unboxing says nothing about how the product performs in the long run! I hope you'll enjoy your welder if you decide to get it!

What is the duty cycle

@HeavyMetalParkingSpot

10 ай бұрын

The rated duty cycle is 30% (at 40°C).

@stephencrandellsr4915

10 ай бұрын

​@@HeavyMetalParkingSpotThanksI

Oh, I remember: One welder to rule them all...... I will follow you....... 😂✋🏻🤘🏻🎸☮️

@HeavyMetalParkingSpot

10 ай бұрын

I hope so! 😅 Thank you my friend, I'm glad to have you with me for the ride! ✌️🤘

@michaelelse9328

10 ай бұрын

@@HeavyMetalParkingSpot You're very, very welcome my friend! 🤘🏻☮️ I'am very happy every time I see a video from your "forge" ....... even I have not weldet once.... 😉😎 Good luck for all your projekts on your ride! 🍻

@HeavyMetalParkingSpot

10 ай бұрын

That makes me really happy! I have some nice things “brewing” in the “forge”. So stay tuned! 🤘

@michaelelse9328

10 ай бұрын

@@HeavyMetalParkingSpot 🤩🤘🏻🎸☮️

@MotoWrenchers

10 ай бұрын

Maybe you should try holing your welder into the flames and see what it says :D

Is it 1 phase o 3 phase ?

@HeavyMetalParkingSpot

2 ай бұрын

It’s 1 phase only.

The "Prime Days" are over Metalheads‼️ Time for the important things in life: ▶️ take down the trash, ▶️ bring the return package to the post office, ▶️ chill the beer, ▶️ ride your motorcycle, ▶️ turn the music louder and then: ▶️ S M A S H the Abbobutton with your skull ‼️ The❗️3️⃣0️⃣0️⃣❗️is to crack this weekend‼️🤘🏻🎸☮️🍺🍺🍺🍻🍻🍻

@HeavyMetalParkingSpot

10 ай бұрын

Haha, thank you for the laugh my friend! 😂 But you are right! Let's go! 🔥 Have an awesome weekend! 🍻🤘

supposed to drag gmaw (mig) not push it

@HeavyMetalParkingSpot

4 ай бұрын

I've been taught "if there's slag you drag", so that's what I do. But in the end it seems like it's mostly up to personal preference and in what position you are welding.

@TheJusnic82

4 ай бұрын

@@HeavyMetalParkingSpot nah mig always drag...should uphand a vertical too unless its thin material

@TheJusnic82

4 ай бұрын

@@HeavyMetalParkingSpot only wite you push is metal core

@HeavyMetalParkingSpot

4 ай бұрын

Good to know! I have too little experience to say what's right and wrong. I'm just a guy in a garage trying to weld with cheap welders. 😅

MMA? this thing does mixed martial arts?!?!? ohhh you mean SMAW

@HeavyMetalParkingSpot

4 ай бұрын

I think MMA is a pretty well known acronym for stick welding, and SMAW is another one. If you clicked this video expecting to see this machine perform awesome roundhouse kicks and stuff, I'm very sorry. I should have been more clear in my title.

@TheJusnic82

4 ай бұрын

@@HeavyMetalParkingSpot im just bustin your balls....canadian here we have to test out every 2 years so its comical the usa standards...even the equivalent usa test you can use a grinder for stop and starts, we cant

@HeavyMetalParkingSpot

4 ай бұрын

Bustin' balls, is that even allowed in MMA? 😉 Personally I use a grinder for start, stops and everything in between. 🤠

@TheJusnic82

4 ай бұрын

@@HeavyMetalParkingSpot i would too if it was allowed here lol

@HeavyMetalParkingSpot

4 ай бұрын

In my garage everything is allowed! 😉

yup - u need bit help u welding skills.. but i like u long hair... forgives :>)

@HeavyMetalParkingSpot

6 ай бұрын

I guess if I spent as long welding as I have spent growing that hair, I would probably be a pretty decent welder. 😉 But until then I'll keep practicing!

Mutta miten toimii kaasun kanssa.

@HeavyMetalParkingSpot

11 күн бұрын

Both MIG and TIG works great with gas!

Only buy from this "company" something that you can easily throw away afterwards. Because they refuse to tell me where to return the defective product after 2 weeks. Send me a video of the error - I sent it. To this again and again - Send me a video of the error, I reply that I sent it - and so I cannot return the defective machine. Never again anything from Vevor!

@HeavyMetalParkingSpot

3 ай бұрын

Thanks for sharing your experience, sorry to hear that it was such a bad one. I hope you get it sorted soon!

@holoflat1662

Ай бұрын

Just buy another, it's $300.