Hey, old Chevys never die, they just run faster.

@SallysSpeedShop

Жыл бұрын

I like that! Seems to be true from what I’ve seen haha

When I had a workshop after spending 4 hours trying to start two cars on different occasions even after the owner said it had fuel, found it was empty, the first thing I try is fuel, great job all the best to yous and your loved ones

@SallysSpeedShop

Жыл бұрын

Sometimes it's the simplest things and that's always the best place to start haha

Thank you so much for bringing us along with your family on vacation again, we look forward to seeing you all every episode brings us many laughs ❤️❤️❤️

@timdavis_365

Жыл бұрын

Thanks for watching. Tim Davis

That old trailer is prolly more solid than these mass produced trailers nowadays

@SallysSpeedShop

Жыл бұрын

You might not be wrong haha

Love the A-team van in the background

@SallysSpeedShop

Жыл бұрын

Thanks! That was a vehicle I fixed for a guy after Power Tour. I should have filmed a video on it!

I worked in Wichita for about 6 months years ago. As the joke goes "I didn't leave anything in Wichita" (no reason to go back). But without a doubt you found the perfect reason. From the camera shots it looks like a super solid frame. And that engine and trans sound like butta. The "tin" can be easily fixed or replaced. What a find!

@SallysSpeedShop

Жыл бұрын

Haha sounds about right. It’s definitely not a bad car for being from the Midwest! The frame is rock solid and it runs great 👍🏼

I'm an old man now and seeing this 57 reminds me of mine when I was 17 years old. I had a few cars since then but my 57 is my favorite and most memorable.

@SallysSpeedShop

Жыл бұрын

That's awesome! Glad it was able to take you back!

Old Mortzke would sure love that “flexi-hose!”😂😂😂😅

Enjoyed, great vid!!!!!

@SallysSpeedShop

Жыл бұрын

Thank you! And thanks for watching!

I love all the dad jokes. Thanks Dad!!

@SallysSpeedShop

Жыл бұрын

He’s good at the dad jokes for sure haha

I’m really looking forward to seeing more if the 57 Belair!!

I got a 55 running a couple years ago for a buddy. I wish it had a LS swap in it. This was a fun adventure guys. 👍

@SallysSpeedShop

Жыл бұрын

Gotta love a tri five! Thanks for watching my friend!

Your car is as good as it gets. You can make it your own. Add air conditioning as you can. I love it! Congratulations!

Thanks for taking us along!

@SallysSpeedShop

Жыл бұрын

Thanks for watching! 🙌🏼

Another excellent adventure! Loved the troubleshooting AND the triumphant maiden voyage. Looking forward to the over-the-road shenanigans! Hope you all had a safe drive home!

@SallysSpeedShop

Жыл бұрын

Hank you Jim! It took a little work, but it was great to take it for its first drive.

Lol, the part where you showed your dad vacuuming out the car, my first thought after you showed the floor is that he's sucking up the entire floor and you'll have a Flintstone car to drive home lol.

@timdavis_365

Жыл бұрын

Thanks for watching. Tim Davis

@SallysSpeedShop

Жыл бұрын

Haha you're not far off there. The floor doesn't have much structural integrity left in it!

Thank you for sharing Jacob.

@SallysSpeedShop

Жыл бұрын

Thanks for watching!

Super cool guy's, see you on the next one!

@SallysSpeedShop

Жыл бұрын

🙌🏼🙌🏼🙌🏼

Watched the vid on the 57 you made things look fun and not stress makes me want to try to get mine back on the road. Great job

Nice job guys good luck getting it home

@timdavis_365

Жыл бұрын

Thank you for watching. 😃

First time viewer,excellent video guys! I love the early 50s style and was impressed with how simple the wiring was. Keep up the good work!

@SallysSpeedShop

Жыл бұрын

Thanks for watching! Glad you enjoyed it!

I cant wait to see the second half of this adventure

@SallysSpeedShop

Жыл бұрын

It should be a good one!

That's one sweet looking car. Another great video guys 👍👍

@SallysSpeedShop

Жыл бұрын

Thank you Shane!

ship it off to cuba , theres an old man looking for his taxi cab

Saws ALL! ALL!saws ALL! Not saws ah!

@SallysSpeedShop

Жыл бұрын

I always say sawzall personally haha Maybe our my southern accent comes out to play on that one 😅

What an adventure!

@SallysSpeedShop

Жыл бұрын

It’s a pretty good one!

As John Travolta said in the movie, 'Grease', "What a hunk uh junk!" Looked like the guy was wrecking this '57 instead of fixing it. What a shame. I had a beautiful '56 Chevy back in 1971 after coming back from 'Nam. I'm a real fan of the 1955 to '57 Chevy. I gotta say I'm impressed with what you and your dad have done so far. To go through this much work to save a classic is a good thing.

Such a great episode. How simple is that Terminator X! I mean it's really too easy lol This video motivate me to get a LS this winter in my 57 Chevy. I got almost everything for the swap...just hoping for Holley Santa's present. Kudos to you both once again!

@timdavis_365

Жыл бұрын

Thanks! Glad you enjoyed it. Tim Davis

Great video, nice little bit of info on termator x. I was a little sad to see the long hauler tin chopped up!

@SallysSpeedShop

Жыл бұрын

Haha don't worry, we had extras!

Wow, what a great adventure!!!

@SallysSpeedShop

Жыл бұрын

Thank you Bill!

@timdavis_365

Жыл бұрын

Thanks for following along. 😃

Fun fun fun fun thanks 👍😊

I’m pumped for the next episode! I’m from Kansas so pretty neat to me!!

@SallysSpeedShop

Жыл бұрын

Oh nice! I should have the second part out next week 👍🏼

@timdavis_365

Жыл бұрын

I'm a TJ also. That's what my dad used to call me. Thanks for watching. Tim Davis

Should totally turn it into a checker cab theme. Sort of a crazy taxi

@SallysSpeedShop

Жыл бұрын

It wouldn’t take much haha Its definitely got some taxi vibes

I actually worked at a dealership in Philly as a tech. One day one of the guys on my team quit and walked out. They gave me the job he was working on for me to finish. He was rebuilding a transmission. I went to his stall and couldn't believe my eyes. He had parts and bolts all over the bench, floor, rack, engine compartment and everywhere. That's no fun trying to figure out what the hell they did and where they were in order to finish the job correctly. It was no fun.

@SallysSpeedShop

Жыл бұрын

Oh goodness! Now that sounds stressful haha

@seancrowley1065

Жыл бұрын

What dealership and where in Philly ? I'm from the Bella Vista section of South Philly.

@edwardkamenar1493

Жыл бұрын

@@seancrowley1065 It was in Conshohocken. Connicelli Toyota

Jack said the bandit harness is a little less expensive than net but it looks as if actually like The Terminator ex it probably was made by Holly so let me all know call the bandit

I'm one minute in and being from Oklahoma I recognize this car on ads for sale. Grabbing the popcorn to see if this is a quick fix(s) or a dumpster fire of hackery.

@SallysSpeedShop

Жыл бұрын

Oh man! I think it's been for sale a bunch of times haha It's definitely a combo of quick fixes and dumpster fires along the way!

@drdjh2003

Жыл бұрын

@@SallysSpeedShop great video. It would up being a good drive for you guys. What’s the plan?

Now we know what happened to the car from the movie Macon County Line !

@SallysSpeedShop

Жыл бұрын

Haha yeah? Can't say I've ever seen that movie

Lol, just as you went into O’Riley’s, an O’Riley’s ad started up.

@SallysSpeedShop

Жыл бұрын

Haha it’s like they know!

Very cool car. I'd hang onto that one. Every cool garage needs one of these in and around it. That shade of yellow [on camera at least] actually looks cool... not a fan of yellow usually but this shade looks pretty T!ts for sure :-) Nice!

@SallysSpeedShop

Жыл бұрын

Thank you! It's definitely awfully photogenic with the yellow paint and patina!

For the right price, it's a decent '57 210 (it's not a Bel Air - some Bel Air trim has been added).

@timdavis_365

Жыл бұрын

Yep. Thanks for watching. 😃

That's not a Bel Aire it's a 210. Door panel indicates standard 210. You should check data tag on firewall. It should read model 1011, indicating a standard 210, one of 250k. If it reads model1011A, then it would be a 210 Delray, one of 25k. Project X is a 210 Delray. Project X also had the rare India ivory over canyon coral paint scheme.

@timdavis_365

Жыл бұрын

The title says Bel Air but we weren't convinced of that. I'll look at that data tag later. Thanks for the info.

WOW wo its got an awejsom motoe n trany..fix it up and enjoy your ride da rest of your life amen

Isn't that car from wichita I've seen it on market place neat to see it on you tube

@timdavis_365

Жыл бұрын

Yes... that's where we got it.

@theheartbeatheretic

Жыл бұрын

That's awesome neat to see a car on the channel that came from my home town me and my dad love the trifives we got 2 56s one 2door sedan the other a convertible a 57 wagon and a 55 2 door sedan your having just started a channel my self maybe you guys will see em one day and all the other projects

I can't believe your dad bought it after he rode in my 57 and we talked to a guy in kansas with one just like it. I knew he was hooked Should I feel good or bad I sent him the add to this one lol.

@SallysSpeedShop

Жыл бұрын

Haha that’s a very good question 😅 I’m not entirely sure yet.

@timdavis_365

Жыл бұрын

Had to get it. Thanks for getting me hooked. 😂

@RIPSRIDES57

Жыл бұрын

Lol your welcome that was a cool weekend hopefully we'll have another event next year. I'll have to get my 2 door running and we need to drive back to Dudes antique store. Maybe it will motivate him to get his out and running.

Yea it needs work but it's cool as can be I seen one before that yellow but had dark tinted windows and holy smoke it looked bad ass

@SallysSpeedShop

Жыл бұрын

We definitely need to tint the windows on this one, once we get them all working at least 😅

@johnweeks5614

Жыл бұрын

@@SallysSpeedShop well I agree the need to go up and down lol

How has this channel not blown up its great

@SallysSpeedShop

Жыл бұрын

Thanks Damian! We’ll see if we can get some better traction going 👍🏼

@timdavis_365

Жыл бұрын

Thanks. Glad you enjoyed it. Hopefully, it will take off soon. 😀

@damianjackson9084

Жыл бұрын

@@timdavis_365 sorry hope I didn't offend you just thought you'd been around for a while

@timdavis_365

Жыл бұрын

No offense taken. 😁

Carpet is the new floor board

@SallysSpeedShop

Жыл бұрын

I like the way you think haha Better than nothing!

nice cool car and vid, and one of the fears on any new plans for a swap LS is the wire set, but that Terminator harnes looks very easy..

@SallysSpeedShop

Жыл бұрын

The terminator is for sure the way to go if you’re doing an LS swap in my opinion!

@CHIPNDEATH

Жыл бұрын

@@SallysSpeedShop ,,Looking and waiting for the chance to do a LS 5.7 to a caprice wagon, some day

@SallysSpeedShop

Жыл бұрын

@@CHIPNDEATH that would be great!

I just finished restoring my 3rd 1957 chevy and you all have your work cut off for you with the body and floor. If you have a mig welder and know how to use it all of the parts are available through several companies that you probably already know about. Today is Dec 5 and I wonder how you made out. I also wonder how you fastened the seat to a rotten floor? Lastly I did not hear you say where you were staying at? Good luck and I wish I could help. Oh , you buddy Ryan that is lending you his garage and all the other stuff is an OK guy in my book

@timdavis_365

Жыл бұрын

We put suit cases behind the front seat to keep it from rockin. Lost part of our right leaf spring in Missouri and had to replace the front tires in Memphis but... we drove it all the way home to Georgia! 😄

No way I would attempt to drive that car any distance! May make for great video, but that thing is a wreck waiting to happen! ;) Building a 56 Chevy, and the first thing it got was all new brakes and steering. Good luck on your trip, but I would have either brought a trailer or rented a truck and trailer to get that car home in one piece. :)

@SallysSpeedShop

Жыл бұрын

You might be surprised at part 2 based on that perspective 😏 haha I agree it wasn’t as safe as it could be, but it was much better than I expected!

@MagaRickn

Жыл бұрын

@@SallysSpeedShop I just watched part 2. You guys are crazy! :) :) But you made it!

@timdavis_365

Жыл бұрын

I was very concerned that we wouldn't make it but... it worked out thankfully. 🙌

I like it all

Cool 😎 !!

@SallysSpeedShop

Жыл бұрын

Thank you! And thanks for watching!

I sure hope you manage to get that seat secure before you go 🤣 and some headlights 🤣🤣🤣

@SallysSpeedShop

Жыл бұрын

Haha I think you’ll appreciate our rig on that 😅

Before I’d hit the road with the ‘57 I’d put a little taller front tire on ….!

Hi Jacob, I just discovered your channel recently. You guys do awesome stuff, keep up the good work. Just got through watching your playlist on the Quonset Hut building construction. Fascinating stuff, you guys did a great job. I was wondering where you purchased, which company, the actual Quonset Hut building itself, the steel for the hoop sections. Good luck with everything in the future guys.

@timdavis_365

Жыл бұрын

Hey, this is Jacob's dad, Tim Davis. Glad you're enjoying the channel. The company we used for the quonset building is Curvco, out of Pennsylvania.

@Flowing23

Жыл бұрын

Thank you

The emblem on the trunk says it had a 265 not a 283 most likely 3:55 gears could have a 3:08 or 3:73 there were no ratios in the 2s. The car has some rust but in the New England it would be in good condition.

@SallysSpeedShop

Жыл бұрын

Interesting. I still haven't done the math to figure out what gear it has, but it cruises at 80 no problem at all!

Love the attitude regarding project x. Lol. I’ve been looking for a 57 to do a project x replica/build. Gonna have to follow along on this!

I job on everything to get out of my house.

@trentdawg2832

Жыл бұрын

Say what….that makes absoleutely no sense

@donaldhalls2189

Жыл бұрын

@@trentdawg2832 in other words he would prefer to work in the shed rather than sit around in the house, all the best to you all

That thing is just cry'n for a set of 15 inch Cragars!

@SallysSpeedShop

Жыл бұрын

I kinda dig the 90s spec billets on it though haha

@timdavis_365

Жыл бұрын

I agree. At least something than what's on it. 😂

That rascal is my age. Beautiful.

@SallysSpeedShop

Жыл бұрын

Haha very nice!

@timdavis_365

Жыл бұрын

We old!

I almost bought that car.

@timdavis_365

Жыл бұрын

Glad you didn't. Thanks for watching. Tim Davis

I don’t remember what my steering wheel was like on my 57, but that looks hard to drive ! Might be the amount of extra weight, wheels& tires, lots of things, especially on the that car. Somebody really goofed it up. I just noticed there ain’t no hood latch or second latch ( 2 latches ) I think.

@SallysSpeedShop

Жыл бұрын

Oh yeah, it’s missing lots of things and the steering was total garbage, but it was running and driving and that’s what counts haha We ended up ratchet strapping the hood shut 😅

it looks like the car from return to Macon County

A DD speed special a trifive with an ls

Try 8volt less to do can use 6voltt parts will crank faster no rewiring just adjust the reg reddy to go

Looks like the Old Project X car. that was never finished as such either.

@SallysSpeedShop

Жыл бұрын

That's why we're calling it Project Y haha

Sawzalling a piece of his frame out? Hope I don't end up buying this car in the future by mistake...

@SallysSpeedShop

Жыл бұрын

It’s an unused transmission mount that comes off the side of the frame. Has no effect on the overall strength of the chassis 👍🏼

"Stock ECU"? LOL. I guess they were a bit less complicated back in the day. What with the Vacuum Tubes and all that they must have had in them in 1957. LOL. I know he didn't mean that I just thought it was kind of funny.

@SallysSpeedShop

Жыл бұрын

Haha you’re not wrong 😂 I didn’t think of it that way!

@timdavis_365

Жыл бұрын

I didn't catch that "stock ECU" thing until you pointed it out. Stock ECU from a 2004 Suburban. Back to the future! 😂

Are we just going to ignore that A-Team Van sitting there?

@SallysSpeedShop

Жыл бұрын

Haha I was wondering who would catch that? I fixed it for a guy after Power Tour

Do you think it needs floor pans did you bring new pans with you with your tools

@timdavis_365

Жыл бұрын

Yeah...I'd say it's gonna need floor pans. 😃

Wait wait wait… where did that A-team van come from???

@SallysSpeedShop

Жыл бұрын

Haha long story! I helped fix it for a guy at the end of Power Tour. I wish I’d filmed a video on it!

👍👍

I wish you lived closer so you could get my car running and I could paint The elk

@timdavis_365

Жыл бұрын

Where do you live?

@billsalzman

Жыл бұрын

@@timdavis_365 Jax.FL. Bring those excellent dad jokes.

@timdavis_365

Жыл бұрын

Jacksonville is about 5 hours from us. You do paint and body? I found and sent you a message on Facebook.

@billsalzman

Жыл бұрын

@@timdavis_365 sorry Tim, I quit Facebook. It's not for me anymore. I've been to your town before. I love the red clay dirt.

I noticed there’s no wire to the alternator

@SallysSpeedShop

Жыл бұрын

Yup, I had to build one for it.

How much did you buy it for

@timdavis_365

Жыл бұрын

15500

Hopefully you get real wheels on it too.

@SallysSpeedShop

3 ай бұрын

We kind of like the 90s spec alloys haha

Project Y? Why not Project Y Not?

@timdavis_365

Жыл бұрын

I like it! 😃

❤❤nice video how could i call you i have many questions about these Car

Not a Belair. Hate when people put Belair badges and stuff on 210s. I think 210s are plenty cool, which is why I own one!

It’s only takes money

@SallysSpeedShop

Жыл бұрын

It takes a little bit of knowledge and determination as well haha

@paulgrimm

Жыл бұрын

@@SallysSpeedShop you made it look easy,but I know better

You'd Probobly get thing done if you didn't talk so much and be glad you have your dad you talk down to him you should have more respect thats ignorant 57 Chevy vidio just listen to your self.lm sorry but l miss my dad he was my best friend and when l hear you it's not good .vest regards from MO. Other than that it's a good vidio THANKS vidio keep up the good work and l enjoyed it

@timdavis_365

Жыл бұрын

I give it back to him just as bad. 😃 Tim Davis

Telling better, this one seems to project x car.

dd speed shop

@timdavis_365

Жыл бұрын

DD has a cool tri-five.

Actually did not see any work being done hands on

@SallysSpeedShop

Жыл бұрын

It’s hard to film and work at the same time, but I’m not sure how you missed us getting things done haha

It's a 210

Will it run and drive? Why ask the viewers?

Seems like I’ve seen that banana 🍌 before ?

Yet another great classic ruined by the ever played out ls swap.

@timdavis_365

Жыл бұрын

Agreed... but, it was already done when we got it.

Stock works ...Holley sucks ...just my opinion

@SallysSpeedShop

6 ай бұрын

I've personally had great luck with the Terminator X ECUs in every car I've put them in

they talk to much and not enough work i mean im litterly falling asleep at my computer.

@timdavis_365

Жыл бұрын

Thanks for watching.

Good video but I'm not a fan of the blue gang flag.

@timdavis_365

Жыл бұрын

Imagine one year with no law enforcement. I think you might find an appreciation for them.

@thepubliceye

Жыл бұрын

@@timdavis_365 I just don't believe in desecrating the American flag.

@timdavis_365

Жыл бұрын

Gotcha. Being the son of a 22 year army vet that served in two wars, I can appreciate that.

Blue stripe shirt.... goodbye

@timdavis_365

Жыл бұрын

Imagine one year with no law enforcement. I think you might find an appreciation of them.

@kirbyhans5261

Жыл бұрын

@@timdavis_365 I understand the necessity, but they are just gang bangers with badges. I have never , and will never need their " help" .

@timdavis_365

Жыл бұрын

I know there are LEO's that abuse their positions and they should be weeded out. I just think it would be much worse for so many without them. Best wishes to you.

Your car is not a true Belair. It doesn't have the proper trim.

@timdavis_365

Жыл бұрын

That's what we've been told. Somehow, that even ended up on the title. What's the difference between the 210 and the Bel Air?

work,not talk.

@timdavis_365

Жыл бұрын

We do both. 😁

You have nothing nice to say about the car. Why even buy it.

@SallysSpeedShop

5 ай бұрын

I feel like we had some decent things to say about it. Have you ever bought a vehicle sight unseen off the internet and then seen it in person only to realize it’s worse than it appeared? 😅

you mean someone selling a car on the internet wasent completly honest and the car looked better in pics?wow,i dont beleive that!!!lol

@SallysSpeedShop

Жыл бұрын

Haha what a novel concept 😂

Them low profile tires look terrible on that car and they suck😢

@timdavis_365

Жыл бұрын

Yep! I like a side wall too. I'll change them at some point.

ｐｒｏｍｏｓｍ 🤗