I just acquired this exact same Craftsman 25cc leaf blower for free from my neighbor who couldn't get it started. So. It looks like I will have some fun trying to get it running. BTW, back in the 1990s I bought a Paramont leaf blower/vacuum for $25 from Builders Square when they were liquidating. Some 30 years later & that same Paramont leaf blowrt/vacuum is still running great & I use it every weekend during the summer As they say, they don't make them like that any more. Nice video, & nice job troubleshooting the Craftman blower. It was educational for me. Cheers.

Glad I found your video. Same blower, wouldn't start. I disassembled down to taking the black cover off the block and looking into the exhaust at the cylinder head. Poured the older fuel out of the block and cleaned the carb twice and it ran. Thanks for showing me the rest of it disassembled cause I still think compression is the culprit.

GREAT VIDEO:. Right when I heard you say the wrong type of gas and it stopped working I said he put straight gas in it and burnt out the piston rings. Then once you pulled the starting cord so easily with one hand without holding the blower down it was obvious the piston rings were shot & melted. I'm guessing 20 psi at the most how easily you pulled the cord & it sounded weak. For $10 I would have bought as well. Just as a suggestion, you could keep a can of carburetter cleaner in your trunk for the next time you find a two-stroke, even a four stroke spray into the carburetter area and if it fires up right away its usually a carburetor issue and not a compression problem which then is a parts blower. It would cost more for the engine rebuild kit, then the entire unit brand new in my experiences. I enjoy the video. I'm always learning, no matter what the outcome keep moving forward. Take care..

Enjoyed that! Cheers!

@ASliceofWoodWorkshop

4 жыл бұрын

Thanks! Have a great weekend

Great video

I have the same blower and it doesn't want to start. Going to check if it has a spark. Nice video

@ASliceofWoodWorkshop

4 жыл бұрын

Spark, fuel, combustion. Those are the things you start with and then diagnose further. Good luck!

Good job, liked your steel toed sandals, brave soul or not as clumsy as me. Did you use ring compressor when rings broke?

@ASliceofWoodWorkshop

5 жыл бұрын

Sandals only when starting it, not while actually doing work. I did not use a ring compressor, not in the toolbox yet.

I got a sense of satisfaction from your fixing this blower with the used parts from the weed whackers. I hope you did too! BTW I love your bins on your peg board for holding small parts, screws and nails. I could use one of them - where did you get yours?

@ASliceofWoodWorkshop

5 жыл бұрын

The bins are from harbor freight. Coupon gets them down to about $14. There is a video I made of unboxing these little guys

@denniswhite166

5 жыл бұрын

@@ASliceofWoodWorkshop Thanks Tim. I'm on the Insider Track Club at HF so I won't need a coupon to get the discount but I can add a 20% or even the rare 25% coupon discount to the sale price. I can't believe I didn't see these at HF. I'm going to look for your video later today.

RESPECT +1000 👍

Does this model have two hoses in the tank

Need a 41AS79BY765 bolens cylinder and Piston and rings ..did they should interchange right ??

@ASliceofWoodWorkshop

Жыл бұрын

Changing them should be almost the same way. As far as parts you would have to get a diagram of your bolens engine to determine which items you need.

I learned from and enjoyed this video because I have a Craftsman blower I want to see it it can run. I won't be making a video of the attempt

I got a bunch of bran new craftsman weed eater 25cc engines and blowers if u need parts hit me up

If the gas didn’t kill it, the carbon in the exhaust port would. Good save, lucky you had the parts hoard.

@ASliceofWoodWorkshop

5 жыл бұрын

Yes. I think it was a combination. There was a lot of carbon. Uildup

@Jim-ie6uf

5 жыл бұрын

@@ASliceofWoodWorkshop there are little locating pins in each ring land that hold the rings from spinning around and getting snagged in the exhaust port. It can be very fiddly putting the piston back in the cylinder with out breaking a ring. A fella has to have pats hoard, something my other half does not understand. She thinks my 3 big rolling tool chests should be out in the woods next door!

Replace spark plug

Use a paint can opener to grab the base of the plug cap...and it will pull right off. These are the worse blowers ever made. I have a new one that is almost impossible to start and it now has a broken pull cord.

buy u a ring squeezer

next time you buy a non start engine test it first by doing a cylinder leakage test

@ASliceofWoodWorkshop

5 жыл бұрын

Can you explain?

why dont you buy the right tools

@ASliceofWoodWorkshop

5 жыл бұрын

Such as?

couldn't you have removed the coil?why didnt go to ebay for a piston and ring an connecting rod ,for $13 you could have gone to sears parts,com and scuff the cylinder,with a little sandpaper. your not very good at this i have seen enough,you need a book

@mgoody8782

3 жыл бұрын

I wouldn’t had wasted money new they’re only 109 lol