Now go and watch George's video if you haven't seen it 👌🏼 kzread.info/dash/bejne/aZOmldKIZpzaops.htmlsi=33Ot-1wnTEdK7BqZ

@MagnumCamNZ

5 ай бұрын

Always do whenever you 2 are teamed up as yaz are just like some of our crew here in kiwi land. The 6499, 210 case and fasttrac's did there job! Well done guy's!

@joncobbald1737

5 ай бұрын

Seen it, bloody brilliant content aswell. Your like a married couple!!!!!

Proper farm horsepower video, with the top humour and banter. More of these Mucker, would lived to have seen a Schluter run a muck there. Some seriously impressive tractor performance too, and no surprises with the Perkins....

I would love to see an old 6 cylinder Nuffield on a dyno some day, just to really see what the old BMC lorry engines are made of. Great video as usual lads.

That Case 210 gave me an eargasm!

Have to say that 6499 was a stunning looking an performing tractor it was producing the horses fckn all of them 💪💪💪 nice battle between the two fast tracs so good in fact think George mighta got a little bit excited 🙄😳😜😂😂 would say the Deeres sounded good but they gotta be good for something 🤔🤣🤣 Brilliant video Kurt 👌

100% agree about the 7810 being one of the best ever built. Love the throaty growl that they have. Most enjoyable tractor I’ve ever driven!

Some awesome machinery Mr muck, goes to show it's all about what power you can put down. Bless the chap's face with the straight six he was well chuffed!

Impressive that Case try the fordson😂

"How much smoke" "Fucking all of it"😂😂😂

For me the Case Puma was impressive. Cracking tractor and a real credit to it's owner 👍

@jamesholland99

5 ай бұрын

Cheers paul I will have the old girl at 250 next year and the t7040 at 290 🤞

Very impressive! Congratulations, George! 😎🚜 I liked "Major Bob" 😊 I used to watch a lot of tractor pulls back in the day and that was definitely a flashback for me. Glad no one had a runaway. A beautiful field of tractors! 😎

Love a good old Dyno day ! Great video keep up the great work 👍

Great entertainment, nice assortment of tractors on the dyno.

😂 I don't know any other channel that makes me laugh so much. You two together are brilliant 👏

Great stuff!

That 8370R is a good example of how making a few changes in the fuel map can really wake an engine up. Great show guys, thanks for bring us along.

Hi Mucker watched George's video last night and enjoyed glad you both had a good time enjoy yours as well 👍🚜😊

I like your vids! Glad I found ya. Keep up the good work!

Some real stars in attendance, but that 7810 for me. What a beautiful tractor.

That was pretty cool.

Watching from Minnesota. You guys are a hoot.

Thanks Kurt all i can say is that was Excellent.. Take care sir....

@LordMuck

5 ай бұрын

Cheers Kev 👍

Great vid..really enjoyed that. Cheers lads 👍🏻

Great dyno video as usual, you two are brilliant together 😂. Just watched both video 👌👍

Great video lots of power good to see the big engines in the majors !

Great video. Enjoyed watching. 👍🏼👍🏼

Gutted I didn't make it looked a cracking day 👍

My old 3185 made 227hp on a Holts dyno back in the day. Might have had a major tweak ? It used to boil back axle oil and melt the diff seals. Got to love a Cummins.

Mighty stuff Puppo, Kurt and George, Fantastico, Thank You💯👌👍🙏🙂

Great vid as usual 👌 great banter with you two as ever 👍

Another great video. Was good to see georges face after he put his fasttrac on the dyno.

Great video Mucker, great selection of tractors on the dyno . George did well. 🚜🔧👍🚜🚜

Very nice video guys , realy gets me excited to put my Renault Nectra to the test next week : )

Excellent video Lord Muck :) that amazing on Dyno testing on tractor too and so cool 😎!

Pretty staggering figures being put out by some tractors😮 lovely selection too! Nice one M'lod 👌 Cheers, Mike

Bloody impressive kit there. Wow 👍👍👍

Great video mucker, that 6499 is an amazing looking tractor and performed well

Great fun and entertainment Mukka :)

Great video mucker lovely selection of tractors especially that Massey 6499 lovely machine 👍🏻

Great video mate I think George is a champion 🏆

@LordMuck

5 ай бұрын

Your autocorrect has mis-spelt 'nonce'

@Darrenws111

5 ай бұрын

@LordMuck 🤣🤣🤣🤣🤣 sweets on the way for you mate 2 tabs of Haribo star mix for you I will take them to the champ to give to you enjoy you're a double champ

Excellent job chaps 👌

Great video mate, as much as I like to see all the new kit with all the hp, I do love the old iron being represented and going strong. Get your Ford on the dyno at some point

Well done Mucker Dyno time is always a video worth seeing can the machines can can they live up to the factory advertised numbers ,Stand by Mates and find out who's spot on and who's BS ,I enjoyed the Russian V12 very cool , I know it was set up for sled pulling ,The more you Muckers know about tractors good stuff

👍

You can walk the walk but can you talk the torque? "Yep"

I worked on a lot of these old 8000 series, bloody awful to work on, farmers loved them, all the fitters hated them !!! Suffered from the middle two liners dropping and cooling in the oil.

@LordMuck

2 ай бұрын

A lot of them in the US got re powered.

@jackmckinnon3208

2 ай бұрын

@@LordMuck very true, or re built with skidder engines. Cheers mucker 👍

does the 8335 RT stand for Race Tractor?

Which ones are best for blocking motorways? Edit: Asking for a friend.

Awesome video mucker I go watch Mr s now 😅

I have to agree with you that 7810 , what a machine

"f@#$&n all of it"...🤣🤣🤣🤣👍👍🤘👊

👍 nice

Great video Mukkahh! Compulsive viewing 🤣 could you just remind me of the website you mentioned in your vid pls? (Not George’s !🤣)

@LordMuck

5 ай бұрын

Patreon.com/lordmuck

defo like to see some of the stuff tickered on to get working

Nice Dyno Day. You would like to see something break, but that gets really expensive and might make a grown man cry on camera. Thanks for the video, Lord Muck. The 8440 was kind of a let down, but it only has a 466 engine, not sure what size had the 619 or 50 series with the V8 Deere

@LordMuck

5 ай бұрын

8440 did its numbers so happy with that.

@douglasmayherjr.5733

5 ай бұрын

@@LordMuckit’s just a brute of a tractor, to only have 150 hp, but when they were made, that’s what all the manufacturers were doing, the high horsepower front wheel assist tractors were not out yet. Allis Chalmers must not be very popular over there. Thanks for the videos.

P and B at brigg had a dyno and one of the mechanics used to tweak up the 2720s up to around 170 hp, when the warranty ran 🤔💪out

@LordMuck

5 ай бұрын

Don't lie - they were done before they left Brigg....

do those figures directly indicate what power the motor is making, or do the different pto systems skew the figures

@LordMuck

5 ай бұрын

It shows what power is put out on the PTO shaft, the engine hp figure will be greater

6499 Dyna 6 looks mint! been at the top of my "modern" dream tractor wish list since i first saw one when they were new! they just look right. best looking MF built in my opinion.

Artic deere will drop 50hp from the engine to the pto according to the manual!

👍👍what kinda tractor was that VE pumped Cummins?. Great video feller.. thank you 👍👊

@LordMuck

5 ай бұрын

Built on to a Fordson back-end

Could you explain for the un- initiated what you were doing,how you were doing it, and why you were doing it.

@LordMuck

5 ай бұрын

So you have a PTO (Power Take Off) which is a shaft to drive equipment (balers, power harrows, etc) The machine at the rear applies a measured load which increases. It does this until the tractor starts to stall out. In this time it gives a read out of peak power and torque.

6499 beast

Gutted I couldn’t make it this year 😞

Nice John Deere 8440.

👌👌🇮🇪🇮🇪👍👍🙏🙏

Maybe a dyno detonation next year....😂.

That 8440 os doing about what the bigger 4 cylinder tractors can do now. So in another 45 years will we see 500hp 4 pots?

Totally loved the video but I have one question, with all this tweeking and mapping what levels of Nox are being produced by these workhorse's?

@LordMuck

5 ай бұрын

I've checked some of the printed read-outs from the dyno and they all say: #Nobodygivesafuck#

@seanpower773

5 ай бұрын

​@LordMuck how dare you 😂

@cammos

3 ай бұрын

If ur worried bout this then u need to leave machinerytube. And start crocheting or something where u wont break a nail or get hurt feelings.😂

Fantastic video, although I’m getting seriously pissed off how many sodding adverts are put through your video footage in total nowadays 🤬🤬🤬by U-tube , grumble over with !!!🥺 I was waiting with my fishing net beside George’s “fastrac “ ready to catch all the spraying engine parts !!!!🤣🤣🤣but to be fair it was good surprisingly 😅

@LordMuck

5 ай бұрын

They're just trying to force you to buy Premium. You're better off with Patreon.com/lordmuck

Makes you wonder how much torque the fordson pto/transmission will handle

@LordMuck

5 ай бұрын

All of it.

@philleeson7835

5 ай бұрын

And a bit more ​@@LordMuck

A Dyno shootout for tractor PTO, didn't even know it was a thing! 🤷🏼‍♂️

What’s the backend of Major Bob from? Surely not an original Fordson Major backend because I doubt that 1,000rpm PTOs were used then, and if they were did Fordson really over engineer the PTO drive to withstand at least 6 times! the original design load specs?

@LordMuck

5 ай бұрын

Just standard Super Major and Diesel Major components.

@Titan604

5 ай бұрын

For some reason the original fordsons had the engine running quite slowly for 540 rpm, which meant that they were not far short of 1000 rpm PTO when at full engine speed. On the new performance majors they changed the gearing so 540rpm PTO = 1500rpm engine speed, perhaps still a little slow for the engine but it did improve the PTO horsepower a bit and helped justify the "new performance". And yes, the Fordson is very over engineered, hence why so popular as tractor pullers!

So Muck, what was the point of all the noise, smoke, and peak numbers? It's how the machine works in the field and how long it lasts that matters.

@LordMuck

4 ай бұрын

Because those numbers indicate how well it will work in the field and for how long.

@cammos

3 ай бұрын

🤔🤭🤦😂😂😂

Hi do you risk damaging the machines doing this?

@LordMuck

5 ай бұрын

It just applies a load like a power harrow or baler would.

Am I the only one that really wanted George’s to shit its guts , just hear his lordship cough up a lung. 😅

@LordMuck

5 ай бұрын

I'd have shit my pants laughing

@ianwood6814

5 ай бұрын

@@LordMuck and probably not the first time either m lord.

@LordMuck

5 ай бұрын

Last time I was 7 ... 47.

where is the old school MX120 MX135 and MX170 Boys ? im sure they came tame the deere 7800 deeres

@LordMuck

5 ай бұрын

Doubt it...

Why would you need that power at the pto?

@LordMuck

4 ай бұрын

Large power harrows, bed tillers, large square balers etc etc

@martymartin2894

3 ай бұрын

How does the test work how does it put pressure on the engine to get its reading thanks. I see now that it is connected just like a baler or something else would be, but it must be very heavy or bolted down so that it doesn't flip with all that power.

@heliarche

2 ай бұрын

@@martymartin2894 I'm not 100% here but I believe the PTO is running either a generator or a hydraulic pump. Whichever one it runs is going to be under a predetermined load either electrical or hydraulic. They'll use a hydraulic pressure reading or electrical output reading and translate that to HP and torque. I hope that makes some kind of sense...

Do u ever at all get worried that one of them power plants is gonna spit something out the side when she gets brought to her knees 🤔..as you're standing next to it??

@LordMuck

5 ай бұрын

No, not worried but it adds to the excitement that they might...

@elroyelblander6277

5 ай бұрын

@@LordMuck 🤣🤣👍👍👊

massey ,sisu engine and fendt back end

@LordMuck

5 ай бұрын

No, Sisu engine and Gima/Massey back end

@andrewk6844

5 ай бұрын

@@LordMuck We did get the 6499 in Australia We had a 6465 6470 all dyna 6 . Oh sorry the 74 series had the Fendt back end . I remember when Massey wanted the Hydrostatic back end from Fendt . Fendt told Massey you can Have the trasmission but you guy need to make up your own system to drive it . That came out at one of the massey training schools

@LordMuck

5 ай бұрын

That's correct, Fendt wouldn't give Massey the Vario.

@andrewk6844

5 ай бұрын

@@LordMuck I work for a massey fendt Agco dealer in Australia

@LordMuck

5 ай бұрын

Then you should know about the Gima back ends in the 6499...

I have no idea whats going on

@LordMuck

5 ай бұрын

So the machine puts an applied load on the PTO shaft so it makes the tractor work harder and the power it is putting out is what is displayed.

I hear the bigger nice masseys are sposed to be better. The ones around here up to 100 or so hp are built in China and they are junk!! My buddy can’t give his away.