Absolute MUST READ ⬇ (Book referenced in video) amzn.to/3QKMjDL This is an affiliate link I earn from qualifying purchases.

@davidbunney3497

2 жыл бұрын

This is not an insult it’s a compliment - u bring a layman approach to knife making but an honest one … u definitely have gotten a good number of views on past videos - b nice to see u make more videos like this one ?

@imonoke7903

2 жыл бұрын

I dont have to read this

@jeffallen3382

Жыл бұрын

Alex, I just got a reply to one of my comments on this. Ideo from the s Amber's trying to look like your account saying I won something. This scam has been rolling through KZread the last few months. Just thought you might want to know.

@tombrown4683

Жыл бұрын

@@jeffallen3382 I got the same kind of reply representing to be Alex saying I won a Benchmade mini Crooked River. When they asked for a shipping fee ($60) I stopped texting.

@jeffallen3382

Жыл бұрын

Just got another one trying to scam reply me Alex.

Interesting side note; in the 1970's a piece of hardened high carbon steel jackhammer bit spaulded off & was going just fast enough to hit me inside the elbow of my left arm & enter the basilic vein ( the largest vein in the arm ) but not through it. By the time that I got to the local hospital emergency room & got an initial X-ray, the steel had migrated up into my shoulder. A few minutes later the next X-ray showed the steel bouncing around inside the right atrium of my heart, which is the path that cyanotic blood takes when it is eventually returning to the lungs to drop the carbon dioxide molecule & pick up another oxygen molecule. After having to lay flat on my back for 3 days in ICU to ensure that the steel attached itself to the atrial wall, instead of exiting the heart & lodging in the small venules of the lung & forming a clot which would have to be removed by surgery, a catheterization of the vein in the other arm was performed to attempt to remove the steel. After 4 hours of being strapped on a fluoroscope table, so the surgeon could rotate my body between two axes to see where his catheter was located, he failed to remove that foreign object. I'm 72 years old now & still carry around that piece of shrapnel in my atrium. This story is just a reinforcement of your warning to always wear personal protective equipment when you're working in a potentially hazardous environment, because you never know when a freak event might happen!

@OUTDOORS55

2 жыл бұрын

Whoa!!! That's crazy! Ive come to the conclusion that hardened steel is not to be messed with in in appropriate ways. I had a piece of a hammer break off and cut my arm. I completely forgot about it until i read another comment where the same thing happened. Your story is scary though! Who would have thought.

@joshstarkey8883

2 жыл бұрын

That's both terrifying and amazing. I wonder if that piece of high carbon steel has rusted itself to bits after the 40 or 50 years it's been in there.

@bourbonated

2 жыл бұрын

Dude is hard as hell, takes his iron pill straight to the veins.

@VinayVarsani

2 жыл бұрын

@@joshstarkey8883 that's a good point but (just a guess) I imagine it's not really able to rust as there's little to no free oxygen in the blood.. like it's all within red blood cells

@ManiacInTheShed

2 жыл бұрын

@@bourbonated 😂 😂🤣😂🤣☺️

I just want to mention that the piece you broke at 10:15 in the video was probably one of the most (if not the most) powerful ones until that point. Even though it only "flew at 6mph", the energy was dumped into opening the jaws. Those things are not easy to open, and they were opened halfway in less than a second. Brutal...

@OUTDOORS55

2 жыл бұрын

I thought that was weird as well. Not sure how that happened lol. Somehow all the energy ended up opening the wrench 🙂

I had a teeny piece of a hammer head go about 3/16 of an inch into my hand. I'll never forget how "hot" it felt for a few seconds but all I could do was wait for it to cool. Bled like a stuck pig too.

@OUTDOORS55

2 жыл бұрын

Yes, i have had this happen to me as well. Had a piece fly off and hit my arm and let a decent cut. I literally forgot about it till reading your comment otherwise I would have mentioned it.

@SpikaLim

2 жыл бұрын

That’s 4.7 millimeters for those who want to know.

@TH-bj1pb

2 жыл бұрын

@@SpikaLim if it had said 4,7mm in the comment I wouldn't have to read it three times before understanding what it was about. 3/16 of an inch could be the same as from Nordkapp to Lindesnes for what I get of it.

@jamesortiz5388

2 жыл бұрын

@@OUTDOORS55 I saw that happen to my buddy. A piece of ballpeen hammer went into his finger. It bled alot had to go to the doctor to have it removed

@Curtis86

Жыл бұрын

I know a guy that had a piece of sledgehammer head go all of the way to his lung! It can kill if it hits just right!

Is this becoming the “project farm” of the knife world? Cool video!

Lots of years ago, an impact wobbly exploded on me at work one day. Knocked my safety glasses across the bay and gave me a gnarly black eye and a little cut on my cheek. A couple of years later I had a little magnetic pointer and noticed my little scar from that jumped out to stick to it. Wife kinda put her for down and made me go to the doc. Turned out I had been carrying a little chunk of that adapter in my cheek all that time. She insisted I have it removed and I still have it in a little jar in the top of my tool box next to my safety glasses.

This is why they tell you to be careful not to drop your straight razor onto a hard surface ( such as a ceramic sink or floor.. not to mention if it misses the floor it will probably cut off a toe..) the razor is tempered to such a high degree that the metal is actually brittle. They will break, don’t ask me how I know..lol! Thanks for the video,always entertaining and informative. Cheers from Nova Scotia. M.

@weevilinabox

2 жыл бұрын

Yeah, I've got that t-shirt too ☹️

@lutzderlurch7877

Жыл бұрын

Nor should you try and catch it XD

I do sword fighting and we once had a blade break. Found the pieces stuck in a tree and we were terrified since checking every blade before use. Pretty much reflects your results

@jeanladoire4141

Жыл бұрын

I always say "you can use a blade that's too soft, but you can't use a blade that's too hard"

@lutzderlurch7877

Жыл бұрын

@@jeanladoire4141 Aye. you can keep fighting with a blade that has a kink in it, but one thatcroke off....not so much.

@jeanladoire4141

Жыл бұрын

@@lutzderlurch7877 yeah, blades were pretty fuckin soft (close to untempered mild steel) for most of history.

@lutzderlurch7877

Жыл бұрын

@@jeanladoire4141 Not sure I'd go that far. it is surprising, how much was possible, genrally speaking pretty early on already, and what was actually done, as well. But without electric controlled thermometers and furnaces, modern chemical analysis of the pieces of steel, there was a much higher variability, and a good argument to err somewhat on the safe side. Swords also broke in combat, but it just goes to say, the line to walk for prefect balance is narrow at best, and with a thing as long as a sword and subjected to the forces a sword blade is, one had to be careful not to overdo the hardness.

@jeanladoire4141

Жыл бұрын

@@lutzderlurch7877 no i saw studies, on earlier swords (before the proto industrial revolution of the mid 14th century), the steel was rarely even tempered, parts of the blade were wrought iron, and a few centimeters later there would be a patch of tool steel. Average hardness in the 13th century would be around 25 rockwell. And i say average beacause every centimeters of the blades would have different hardnesses. Swords would rarely break on earlier periods, being more prone to bending, as was mentioned by Caesar for Celtic swords, Nordic tumbs found with bent swords, and just metallurgical analysis of the found exemples. So yeah, i'm pretty confident when i say swords were usually pretty damn soft, with harder spots, but it was a nonsense to have a hard sword, beacause a blade doesn't need to be very hard to perform well, contrary to what people say today (and once again i'm a bladesmith, i make swords, tools, whatever, and i have experience working with bronze, and while they need frequent honing, just like a poor quality modern steel blade, they will do what you want them to. I've chopped a deer into pieces for a hunter with a mild steel falchion that was 2mm thick near the optimal striking point, and the edge didn't take a dent even trough the spine and bones).

Where else would we be able to learn these kinda things if Alex wasn't Sciencing The Sh!t Outta Stuff on our behalf? 🤔 Great work Bud 😁👍

Dude, I really really appreciate the hell out of your videos, thank you for the information, I have learned more from your videos than all the other knife guys combined, and you always put the information in verbiage that's easy to understand, thanks again and keep up the good work! 🤘

@GerstBladeworks

2 жыл бұрын

Same here dude.. I literally learned and studied to be a better sharpener because of this man and now I can put awesome edges on my blades, freehand. I really appreciate you brother !

I love the new series of hardness and tensility tests! I have broken knives and I have stood nearby when others broke knives. Absolutely nobody ever does it in a vise! A buddy of mine broke the tip off my knife while trying to pry open the back-cab window of his pickup, for example. I have never heard of anybody getting injured by fragments. I think it is fair to say that, every time I ever witnessed a knife breaking, it was being twisted or used as a side-to-side lever, not an up-and-down or forward-and-backward lever as demonstrated in this video (between the vise and the wrench). I would be interested to see what the high-speed camera picks up in those instances.

@garethbaus5471

2 жыл бұрын

I once had a knife shatter while whittling, it was an extremely brittle Ozark trail brand fixed blade.

@OUTDOORS55

2 жыл бұрын

My goal was to just see what hardened steel does when it breaks. I might test more realistic scenarios 🙂👍

Loved this video man, actually really helped me understand the process of heat treating and how it's results are discussed and applied

Good to see u back on here - hope to see more videos

I have always loved the mix of great knowledge, production quality, and your sense of humor in all your videos. Keep up the great work!

Just got home for the weekend and see you’ve uploaded today.. a great start to the weekend

Great video, subject, and testing, thank you!

Thank-you for doing this, it looked like a lot of work.

Lots of hard work! Much Appreciated!

Great experiment. Glad you are back with videos, it was boring without them.

Lots of juicy information and fun footage!

The effort put into this video is awesome

Great video. Answered questions running through my mind for a long time.

Really glad to have you back brother. I missed all of the shenans.

It's amazing to see the broken bits are orange hot. Pretty impressive. Thanks for sharing 👍.

Glad to see you putting out videos. We miss ya!

Value here, in my view. Relevant (and of value) to knife breakage for sure. Of course, also makes me think about the sharpened edge apex and potential for chipping; my guess is the findings will be similar and this video also holds value toward that supposition. Just me. Thanks for your good work.

Great video! I always wondered why more knife manufacturers didn't want to achieve the highest hrc possible and this video really showed why. Btw, your sharpening videos are the reason I was able to learn how to correctly sharpen a knife to the desired sharpness I wanted. I struggled for years to sharpen my pocket knives and now I find myself sitting in the garage at night, drinking beer and sharpening knives. Thanks for all your great info!

Man I really digged those two last videos. Your channel has come far! Love the curious approach! Greetings from Vienna!

It is crazy the amount of time and effort you put into your videos and tests! I love it and thank you! I have learned a lot from you. I do have a knife making tip for you which I will try to find the appropriate video to share it in.

This was great, very informative and your style is as always very entertaining 😀. Thanks for another great video.

Very nice video. I have definitely learned something.

Absolutely fascinating and very informative video. Top job. Love your videos...

What an amazing production - thanks a ton!

Hi Alex, I remember you having a video on breaking knives a while back. This video provided lots of information on what happens when a knife breaks or any harden metal that breaks.

Dude your videos are always great. I was worried for a while there that you quit but its good to see you back

Great video! Thanks. Glad to see more content lately.

Cannot thank you enough for this video! In so many ways!

Glad you're back making more videos. I love all the new tech you're bringing to the channel. Hey, can you make more knives again? Like, make a weird design that's also functional and super sharp. Maybe some of that neat heat treating so it has cool coloration?

Very informative! One of your best videos! I'm an intermediate knife maker and I learned a lot from this! Ty!

You remind me of the guy on Project Farm , very thorough !

Solid, entertaining content. Articulate and humorous. Good to see ya!

To be fair, your everyday wear and tear is breaking knives on KZread. Lol just having fun with you buddy. I love what you do and always get excited when I see a new video pop up from you. Your channel has helped me understand the process of knife making more than any other as I am a visual learner. Still haven't had the opportunity to make my own knife yet but I hope to one day.

@OUTDOORS55

2 жыл бұрын

Lol I know😂🤦‍♂️ 👍 Thanks for comment, really appreciate it!

Great informative video ! I appreciate your obsessive curiosity. It couldn't have been easy making, breaking and testing all those samples.

Thanks for the video and for the book! Gonna make my own knife soon!

Great Video! Great work as well, thank you!

I'm glad your back too making content i always find that your video content is helpful and always interesting. One thing I wish you would do I just every once in awhile is throw a knife review in there just too mix it up because I know myself i always liked the ones you did in the past like the Spyderco endura tenacious and so on. Anyways glad too see your back Android good luck with future endeavors

Very interesting. Thanks for doing this.

Great video on a great subject as always Alex 😎👍

I've always liked all of your videos Alex! Thank you!

love this video, thanks man!

Fascinating vid man, cheers for the time, expense and effort👍👍

Awesome video! Mad scientist with the experiments lol

I’m a mechanic who also does welding and fabrication work.. Makes complete sense to me.. The hotter you get the piece you’re welding or bending will lead to breaking more easily and being brittle. Great stuff man!

awesome video. no idea why but it fired me up. HELL YEAH

Great video! Last week I was using a file as a lever. It broke and a piece came flying to my face.

Great video. Shattered all expectations.

Superb! A very nice topic, very informative one! Cheers!

Interesting testing. Keep it up? Thanks.

Amazing. Kudos for the effort and scientific approach. Peace

Thank you for making this video

This was one of the best 👍🏼

Nice to see what happens when I test a knife sometimes I don't find the pieces

I can certainly say that chipping a knife, regardless of the steel, is the easiest thing in the world for me. Slashing vines, weeds, or small saplings will always find a rock beneath the soil that will always chip. One exception so far is my AG Russell Sandbox.

@bladetherapy3797

2 жыл бұрын

I just read about those in their catalog, YOU HAVE ONE??!?¿,¡?!?!?!, DUDE, not gonna lie I'm jealous as heck, they even made their own steel for the sandbox series

@willieboy3011

2 жыл бұрын

@@bladetherapy3797 I was traveling through NW Arkansas. The store is visible from the freeway, so I stopped in. I got the Bowie. it is incredibly lightweight, and I love the handle. This is the only blade that has not chipped. I am not saying it will not, but it hasn't yet. I have had 8670, 5160. 52100 etc., and they all chip. I fixed 3 today. I should just use my machete, but a knife is what I carry. I am very impressed with the Sandbox series. I will probably get one of his utility knives in the series next.

Great video and test! Makes sense, lower HRC steel takes more pressure to break but when it does finally break, all that energy has to go somewhere. Versus the 65 HRC that takes much less pressure to break and in turn much less energy but it also appeared to break cleaner along with much smaller projectile pieces, definitely still dangerous to something like an eye though. This video made me wonder how a steel like 1084 with no temper will act compared to a stainless steel with no temper. Really enjoying the content and I appreciate the time and resources put into making it!

I had no idea. Great content.

Great video mate such a detailed break down, thanks for taking the time... I only use 1084 👍

great content- bluntcut on BF does some good knife testing on various at crazy rockwells ,so my hats off to all you knife knerds who are always pushing the boundaries

Thank you another great action video with super explanation and presentation. I watched this video last night really very interesting and informative, as always you put a lot effort and thought into your videos and it shows. It is fantastic to see you back on KZread, I have just completed one your leather strops, I had made one of yours a few years ago and after watching the video again, I realised that I had been using the wrong polishing compound and my technique was not great anyway the, new strop seems to be working well and thanks to your video my technique is progressing. Thanks again Take care Sam

Chapeau, a good choice of interesting subject. The higher the degree of hardness the blade will not be flexible, and it will be more prone to breakage and its maintenance will be more challenging both in the sharpening means required and in the technical challenge in sharpening it.

Super cool 😎 video. Great work!

That was very interesting, thanks.

Very cool video. Yes I broke the tip off an 1981 uncle henry equivalent of the ranch boss, prying with it. My first real knife and I was 14. I have not done stupid stuff with my knives since then. Hey live and learn.

love the videos. As far as I know a big part of why knife makers don't run their production knives at high hardness is ease of machinability. If a blade if heat treated too high it is much harder to sharpen and past a certain point it isn't going to make sense for a mass produced knife to push the hardness.

Nice test!

Thank you for this informative video! I understand the point you were trying to make. I typically only use my blades for cutting tasks. I like SAK knives for this. I heard that the other tools on a SAK are tempered lower than the blades for example the large cap lifter and screw driver they recommend for light prying tasks. I typically don't carry a knife with that feature. I carry a single bladed number 1. Since retiring I'm usually always close to the proper tool for the job. I bought a small tinker I really like, but love the Alox handles on my number 1. Everyone is different and needs to find what works for them and their personal use. Thanks again for doing the video! Jeff

Awesome content...! Thank you for sharing

Great work!

As a product developer, engineer/inventor, I think it is more complex than warranty vs safety. While those are certainly important considerations, they are far from the only ones, and not even the top consideration for me, even though my products have a lifetime warranty. For my designs, the most important consideration is the “best tool for the job”. A knife with the best possible edge retention is not the best knife, but is actually a poor one. If you maximize one attribute at the expense of others, it is a poor design, outside of very specialized applications. General durability (as opposed to just the edge) is very important in tools, knives included, and not just for safety, or for warranty, but continued use. As a general rule, the harder a steel is, the less tough it will be, and almost all untempered or “maximum hardness” steel is very brittle, easy to break. You can resharpen, or even straighten a softer blade, but you cannot just weld a too hard blade back together. All of this is much, much more true when considering certain fields where that tool may be important in a life and death scenario. My field is defense, and defensive tools/blades must never break. A survival blade would need the same attributes. Thank you so much for these tests, they are massively appreciated, and I understand how intensive product testing can be. Cheers 🤙

@heni63

2 жыл бұрын

Thanks for the comment, found it interesting

@OUTDOORS55

2 жыл бұрын

I agree "best tool for the job". I personally dont think the general public thinks that way though. I think as makers we over analyze every detail. Maybe those details make a difference, maybe they don't. This was just a simple look a one aspect to see if there's more to the story. Thanks for the comment 👍

@BenfromFlux

2 жыл бұрын

@@OUTDOORS55 Totally. Wasn’t meant as a criticism, but as I start the comment, from the makers perspective. Really love what you are doing, and excited to see where it goes!

@BenfromFlux

2 жыл бұрын

@@heni63 haha thanks for reading my essay! Just saw how long it is 😂

Another great video!

Was driving D9 caterpillar track pins out in the 90s when a piece the size of a 22 bullet spaulded and went across a 80' foot shop , into a mechanics chin , along his jawbone and lodged adjacent to his juglar , all while knocking him completely out !! Scary stuff ! Preciate ya Sir .

Excellent topic to bring to the attention of all who actually do work & make things. The average person has no idea how easy it is to get hurt & possibly permanently lose an eye or sever an artery without adequate protection.

@OUTDOORS55

2 жыл бұрын

It's crazy how many stories there are of this actually happening with hardened steel tools.

Great video sir...very interesting and practical, for me as a hobby knife maker. Thank you sir. Too hard a Rockwell hardness is just too "hard" to sharpen and much too "hard" when it comes time to reprofile the edge after years of use...there's a reason that the companies give us 57-59 Rockwell, it works. Thanks again.

Great video as usual! How's your house coming along by the way?

Nice video! Would have been cool to see those shards going into clay or maybe some ballistics gel! Keep up the good work!

@murod78

Жыл бұрын

Nice video! Would have been cool to see those shards going into clay or maybe some ballistic gel! Keep up the good work!

Yes ! I enjoy all your videos

Good job man! 😊

Great videography!

Good work!!

Great content!

Good stuff. Would using some form of a torque wrench in the leveraging allow you to record force applied? Interesting video.

@vlsblades3245

2 жыл бұрын

That is a brilliant idea. Would just need accurate spacing between the vice and wrench to get a clear result.

That is awesome! When I was starting out making knives (1995?) I broke a piece of M2 in a vise (ran out of cutting disks/patience). The fragments broke through the window 3 feet away and I found them up the hill. I still like M2 and hard knives... but I like softer blades too!

I wanna see a video of you doing all the things I shouldn't do with my knife haha. cool video!

That's a great idea. It will only take the correct distance between the mechanism and the wrench to get a clear result👍👍👍👍

Great video!

I love your scientific approach: "so.... let's break some stuff " :D

Sometimes you may want to have softer steel. Victorianox uses soft steel purposefully to make it easier to sharpen. Its increadible easy to sharpen in a short amount of time instead of needing a special diamond file or something. Also like a razor blade, having a little bit of flex helps a thin knife in many ways.

Good video and experiment , thanks for sharing , God bless !

Good info. Thanks.

Very good video!

don't forget you go through more sanding belts on harder knives compared to softer ones when grinding