Why Won't It START? We Need To Drive The '57 Chevy!

Автокөліктер мен көлік құралдары

Ignite your ride's brilliance with Avalon King's $99 ceramic coating 3-pack during our 4th of July sale at avl.kg/robbylayton4july
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Repair

Пікірлер: 357

  • @RobbyLayton
    @RobbyLayton Жыл бұрын

    This 4th of July, ignite you’re vehicles ultimate shine with Avalon King Ceramic coating 3-pack for just $99 wile supplies last!! Sale ends Tuesday night!! avl.kg/robbylayton4july

  • @RaisingCain78

    @RaisingCain78

    Жыл бұрын

    Americans call this day Independence Day.

  • @rodney1818

    @rodney1818

    Жыл бұрын

    Alright you missed your opportunity there demery you're supposed to say it is now after you turn the camera around and it's on demrry

  • @Jmon45

    @Jmon45

    Жыл бұрын

    Did u steal Bud from heavy D

  • @paulhiebert1887
    @paulhiebert1887 Жыл бұрын

    Well...folks, looks like we have us a cliff hanger!!! Stay tuned to see if Hillbilly can tell Robie "you know if we had a 5.0 we wouldn't be flying home" on the next episode of Robby Leighton Nation!!! 😮😊😂

  • @kimetherington2252
    @kimetherington2252 Жыл бұрын

    Another video to be made on the 57 doesn't hurt my feelings! It gives us more time with the 57 rust bucket which I hope you fully restore! This saga without the help from Summit would take forever just to get running! This car deserves to look like it just came out of factory, and Robby is just the man to do it! Til next time, take care, and we'll see you on the next...

  • @melissadunagan6596

    @melissadunagan6596

    Жыл бұрын

    I second this, rebuild this car so the out side looks like new

  • @srchastain859
    @srchastain859 Жыл бұрын

    Actually, the V8 side of the core support is inside. The 6 cylinder is two cylinders longer than the V8; hence mounting the radiator on the "grill" side of the core support. (I'm old, I remember!)

  • @bryanomicioli3301

    @bryanomicioli3301

    Жыл бұрын

    I was just about to write that. I’m not old and I know that, the summit guy is a little off on his knowledge as well, in another video he said that the 350 came out in 1974….. oops.

  • @rodney1818

    @rodney1818

    Жыл бұрын

    Yuppers

  • @faslane5

    @faslane5

    Жыл бұрын

    @@bryanomicioli3301 little summit guy is embarrassing

  • @briansteve5269

    @briansteve5269

    Жыл бұрын

    I don't reckon Summit is too happy with their rep dropping F bombs in the background of this family friendly programing.

  • @RobbyLayton

    @RobbyLayton

    Жыл бұрын

    @@briansteve5269 can you add a time stamp for the f bomb I wasn’t aware of it and if it is actually that I would like to make sure it’s removed and doesn’t happen again!! Thank you!

  • @sgreid7
    @sgreid7 Жыл бұрын

    25:58 did he just say what I thought he said. You might want to edit that out.

  • @johnperreault116
    @johnperreault116 Жыл бұрын

    back in '77 I had a car in Japan where the rust was terrible. I used the floor carpeting to keep peoples feet inside the car. When I was rotating back to the states, I gave the car to another guy because it was so rusted out and dangerous

  • @chiefwarrant9719
    @chiefwarrant9719 Жыл бұрын

    Matt is building a snowcat that will be the Alfa Snowcat, Whiskers needs her makeover!

  • @RobbyLayton

    @RobbyLayton

    Жыл бұрын

    I agree, but I will have to paint Matt’s first. 😂

  • @crazytodrone
    @crazytodrone Жыл бұрын

    Dude Looks Like a lot of Fun! I just converted my GMC Yukon Denali into a stealth mobile music and video editing studio/camper with solar power for refrigerator, interior lights, computer and sink with water pump! Video coming soon!

  • @larryanderson4746
    @larryanderson4746 Жыл бұрын

    You didnt show how you "tightened" the loose front wheel bearings but I think you have them too tight! There must be some play too allow room for expansion as they get hot.( just enough to feel a knock/thunk as you pull in & out) If not they will overheat and seize up! I did the same disk conversion on my 57 Nomad. Lookin good!!

  • @missingremote4388

    @missingremote4388

    Жыл бұрын

    I found out the hard way too. After 250 miles.... hub nut over tight. Then the grinding noise. I use a tourqe wrench from then on ( 7 years ago) 2008 W- body Buick

  • @normdyer94
    @normdyer94 Жыл бұрын

    Distributor timing 180 degrees out, so easy to do on a chevy. Me too.

  • @SPHYNX99752

    @SPHYNX99752

    Жыл бұрын

    There isn't a distributor. 🙄🤔🤣🥰🤷

  • @adventuressagas
    @adventuressagas Жыл бұрын

    From Kenya east of Africa i watch all of your videos and i love it i would love to visit your work shop one day.

  • @kassiie4you
    @kassiie4you Жыл бұрын

    Nice Wyoming plate you got there... :) I'm a ford gal but I have always LOVED the '57 Chevy. Good job crew!!!

  • @leonardbixler102
    @leonardbixler102 Жыл бұрын

    We seen it start on summit video, it's not timed correctly! It's hilarious hillbilly drops the bolts, boss giggles at him! Awesome videos!!

  • @swapnilmankame

    @swapnilmankame

    Жыл бұрын

    the harness was plugged incorrectly, What videos have you been watching?

  • @JAMES-KB7TBT
    @JAMES-KB7TBT Жыл бұрын

    DX Engineering is the best!

  • @stevescott6503
    @stevescott6503 Жыл бұрын

    The drag link may be more than just touching the oil pan, there is no weight on the suspension. I would check it again when it has weight on it. Better to be safe than sorry.

  • @evanschmidt5624

    @evanschmidt5624

    Жыл бұрын

    As I was watching this for the second time and Robby says barely making contact I wondered if they took into account body roll during turns

  • @tavolo22
    @tavolo22 Жыл бұрын

    I’m sad. Really wanted to see it start. Good luck, guys.

  • @jon_craftingo.o4686
    @jon_craftingo.o4686 Жыл бұрын

    This past week or so has been the longest commercial for summit racing, I think I’m good for the rest of my life thanks! Can’t wait for the regularly scheduled programing to return.

  • @rhondasweeney7271
    @rhondasweeney7271 Жыл бұрын

    So sorry you did not get the car going when you wanted. Hopefully it will be on the road soon😊

  • @drkrypton4410
    @drkrypton4410 Жыл бұрын

    all of you are awesome. hope you rebuild this to almost Golden Nugget level!

  • @timburton1715
    @timburton1715 Жыл бұрын

    We just Love ❤️ your Show... each episode is amazing... informative and entertaining... Just love ❤️ the Bosses adorable giggle.

  • @ReservedForFutureUse
    @ReservedForFutureUse Жыл бұрын

    Honestly would rather watch you do body work and paint cars vs watching a long commercial for Summit.

  • @mattc.310
    @mattc.310 Жыл бұрын

    If you're watching the Summit channel.... enough said. This is going to be quite the cruise.

  • @manchurob6432
    @manchurob6432 Жыл бұрын

    Says you have to wear safety glasses........and then doesn't wear safety glasses. lol. You and Hillbilly are awesome! Great video series!!!

  • @homegrownson
    @homegrownson Жыл бұрын

    Everyone used to Think 55,56 & 57 Chevy's drivers were the Nicest People who would even Wave to you as they drove by in the Rain, Guys, we were pulling a string attached to vacuum wipers that would not pull back without full vacuum during acceleration, probably crossed your plug wires

  • @SPHYNX99752

    @SPHYNX99752

    Жыл бұрын

    The coil pack for each cylinder is located directly above the cylinder it fires in. The LS is strange like that. 😊

  • @jimepperson2075
    @jimepperson2075 Жыл бұрын

    Be patient, it’s all going to be okay. Get some sleep and finish tasks at hand. Good luck y’all. Safe trip home. 👍🛠

  • @rayjones463
    @rayjones463 Жыл бұрын

    if you space the torque converter out like that that will put all the troque and horse power directly on those 3-4 bolts that hold the converter down to the flex[late that will put all 500 hp that motor make into those bolts ...it will shear them off at some point in time...think hole shot off the line.........

  • @UnfinishedProjectDartSport
    @UnfinishedProjectDartSport Жыл бұрын

    6:21 StaleKracker💪🏼

  • @ronwade2206
    @ronwade2206 Жыл бұрын

    You've had all week, it's an American V-8, you got plenty of help, and hammers! Get. It. Running.

  • @ronaldolweiler7745
    @ronaldolweiler7745 Жыл бұрын

    Us old guys may be called dinosaurs but we built cars that took a beating! And we didn't have kits kits and more kits ! Cross member is upside down , self tappers wont hold . Pinnion angle is set with weight on the axle and a 57 electric wiper motor bolts right on .go get another kit !

  • @LT1210

    @LT1210

    Жыл бұрын

    The whole point of the video was to highlight the parts/kits available from Summit Racing not to show off their fabrication skills.

  • @scottbozarth8459

    @scottbozarth8459

    Жыл бұрын

    Ok, I’m sure you dinosaurs could rebuild a complete basket case, rust bucket in a week’s time with nothing but hopes and dreams, right? Kit car? Get real. Keep bragging about stuff you probably never did while these guys actually put video evidence of their work out there for trolls like you to critique from your easy chair.

  • @drkrypton4410

    @drkrypton4410

    Жыл бұрын

    I thought the same about those self tappers.

  • @thedumbassspeaks

    @thedumbassspeaks

    Жыл бұрын

    It might as well be about both! What’s the point of showing products in a fabrication video if you aren’t going to show them being installed/installed and operating?

  • @samziarek5114

    @samziarek5114

    Жыл бұрын

    Times have changed and they don’t make OEM parts like they use to for vehicles like this. And as far as the cross member being upside down, the car was “built” long before they were even alive so chill, they’re learning. The self tappers have you maybe thought it’s just to get them home 🤦‍♂️ this isn’t a full restore.

  • @TrippyTrev45
    @TrippyTrev45 Жыл бұрын

    I watched it start on summits channel last week

  • @ClanOxyL
    @ClanOxyL Жыл бұрын

    I've been watching since robby worked with matt on the golden nugget and I've got to say, this channel has become my favorite channel to watch. I love the work you guys do and you guys have a great crew!

  • @therustyduck5400
    @therustyduck5400 Жыл бұрын

    I'am Loving this 57' build! There is defiantly some talent in that shop!

  • @robakagyser2300
    @robakagyser2300 Жыл бұрын

    @Robby Layton Enjoying watching this collaborated build! Looking forward to seeing another build with Justin out at Robby's shop! A Chevy Malibu Wagon build with a LS swap would be cool! Doing a 4 door to 2 door conversion on the Malibu wagon would be really awesome! -Rob in Tennessee

  • @allisoncochran1607
    @allisoncochran1607 Жыл бұрын

    I'm a '57 Heavy Chevy also!! 🤣 We are both 66! Thanks, guys.

  • @koekum2142
    @koekum2142 Жыл бұрын

    Great advice that before mating surfaces should be clean

  • @jeremydiamond8824
    @jeremydiamond8824 Жыл бұрын

    OH BOY !! Well hang in there crew that’s allot of work in a week let alone a month ! 😎👍🏻🇺🇸🦅🙏🏻😇ROBBY NATION !! You guys got this with SUMMIT !! 🇺🇸

  • @davidmahan4160
    @davidmahan4160 Жыл бұрын

    Can't wait for this epic journey to begin. I'm running a sweep stake on whole will fall through the rotten floor, and if it rains how much water will come in through the holes. 😂 at leat it should run without any problems 🤞❤️👍

  • @SchysCraftCo.
    @SchysCraftCo. Жыл бұрын

    this is pretty cool Project, it is coming alone well. cant wait to see more videos soon. keep up the great craftsmanship an hard work my friends. Fab On. Weld On. Keep Making. God bless.

  • @stephenpoe2037
    @stephenpoe2037 Жыл бұрын

    So So close ! You will get there soon. Thanks for sharing +

  • @mib7483
    @mib7483 Жыл бұрын

    I must take a road trip to see this 57'. I love this car.

  • @rickdeschenes1598
    @rickdeschenes1598 Жыл бұрын

    Wow, I thought I subscribed. love all your projects. Matt's offroad has the Bombi project. Does his cab need an overhaul so he can have a back seat, and noise control? Might have to move the cab forward but havinng room for his crew would be handy.

  • @terencegillespie6675
    @terencegillespie6675 Жыл бұрын

    Sssssome day y’all may be professionals at this. It takes guts to move from body work to engineering figuring you’re going to drive a mass of rust 2000 miles to get home. Hope your engine and the road is smooth so that the body doesn’t shake apart mid trip. The boss might fall out the bottom.

  • @moosesamli4569
    @moosesamli4569 Жыл бұрын

    Summit Justin has the perfect attitude. I’m surprised you didn’t kidnap him and made him move to Utah.

  • @sir_frag1868

    @sir_frag1868

    Жыл бұрын

    He has such great enthusiasm and positivity.

  • @NCMTNBOY
    @NCMTNBOY Жыл бұрын

    So how/why is Bud there? I must have missed that part.

  • @M1dnightblazer
    @M1dnightblazer Жыл бұрын

    When the summit guy yells something about bats in the background🤣🤣 that clip was perfect

  • @imfloridano5448
    @imfloridano5448 Жыл бұрын

    Ya got as far as Betsy Sue the Chevy would allow in this episode of dun dun dun "Adventures of The Raggedy Chevy Going Back To Utah"!!!😂🤣🤣 Things will work out for sure cause you are at Summit. Should use fuel injection. Make sure the ignition box doesn't require an injector pulse to start and check the crank and cam position sensors and wiring.

  • @lonhoschar1943
    @lonhoschar1943 Жыл бұрын

    Great video!! You guys got a lot done!! Too bad it didn't fire up but I know after a good nights sleep you'll get it figured out!!

  • @xvsj-s2x
    @xvsj-s2x Жыл бұрын

    Robby I have faith in you, Hillbilly and The Boss making it back to SLC with this HOT 57 💙🤍💙 including Justin of Summit ✌️

  • @TheOldaz1
    @TheOldaz1 Жыл бұрын

    Awesome job guys, almost ready to rumble.

  • @moparman1962
    @moparman1962 Жыл бұрын

    Great video as usual. This '57 Chevy is going to be "spicey" with that LS3, Holley intake, Edelbrock 750 performance carb, TCI transmission and Currie posi rearend. Speaking of "spicey", Justin (and the editor) gave everyone the "spicey" version of the video at the 25:58 mark. 😯🥵🤐

  • @williambasinger5859

    @williambasinger5859

    Жыл бұрын

    Yes spicy it will be. I just can’t get behind this project because the bones of the vehicle are not there to support the upgrades being made they need to do the body and chassis work first just like was done on the golden nugget.

  • @gh8447
    @gh8447 Жыл бұрын

    You ended the video there?! I know you got it running, 'cause I've seen the Summit Racing video!

  • @aarone3790
    @aarone3790 Жыл бұрын

    Awesome video Happy 4th of July

  • @oldinuselesshancox5194
    @oldinuselesshancox5194 Жыл бұрын

    Greetings from the other side Thanks for a nice post Probably too late but if the windscreen fogs don't bother with aircon just open those quarter windows an point onto screen Thanks again for fun an informative post 🤙🖖

  • @Stingray4
    @Stingray4 Жыл бұрын

    If you drive that home. I hope you bring a support vehicle to go with it. Great video.

  • @markbrehon43
    @markbrehon43 Жыл бұрын

    Criminy, that's just a cloud of rust held together by really old paint.

  • @donwilliams3626
    @donwilliams3626 Жыл бұрын

    Too bad it didn't start tonight. But there is tomorrow!

  • @noonehere1793
    @noonehere1793 Жыл бұрын

    With that floor…you could always Flintstone it home….😜

  • @gregoryblair9810
    @gregoryblair9810 Жыл бұрын

    Rebuilt a 327 Chevy in a 69 C10. Put in a turbo 300 tran, which had a larger ujoint yoke than my driveshaft had. Rather than cut and weld on driveshaft we just used a ujoint for ford f250 4wd which was wide one half and narrow the other. Worked great!

  • @justinflick6802
    @justinflick6802 Жыл бұрын

    This is an exciting build

  • @sandkworkshop
    @sandkworkshop Жыл бұрын

    It’ll be ok. It’s gonna run. Good job.

  • @marvindebot3264
    @marvindebot3264 Жыл бұрын

    I would so love the contents of that workshop.

  • @warrengreenley7689
    @warrengreenley7689 Жыл бұрын

    You may want to check the want to check your wiring on your coils they do have control of your timing and do to be put on a cerain way if they are not installed right you will have that very problem!

  • @kentmckean6795
    @kentmckean6795 Жыл бұрын

    The biggest draw the LS has for me, is that it is a modern fuel injected motor. Putting a carb on it doesn't make any sense to me.

  • @welndmn
    @welndmn Жыл бұрын

    Derby guys love that stainless flex radiator hose! LOL

  • @DonFarmer-hq5sw
    @DonFarmer-hq5sw Жыл бұрын

    This project looks like big boy fun 🤩

  • @lazermilk1701
    @lazermilk1701 Жыл бұрын

    That little chain tool for compressing the suspension was cool, not seen one of them before

  • @bjrnkland3096
    @bjrnkland3096 Жыл бұрын

    Have you ever had any communication with Junkyard digs. He is doing a great job reviving cars, and with your fixing skills... Say no more. Up to you.

  • @peanut71968
    @peanut71968 Жыл бұрын

    Yeppers! I always make sure my mating surfaces are clean! Yup!

  • @akalksander9184
    @akalksander9184 Жыл бұрын

    I like that tool. It can come in handy for a lot of applications. 12:07

  • @lifebehindtheselens
    @lifebehindtheselens Жыл бұрын

    I love how that saying lives on expertly installed!

  • @richardhill4862
    @richardhill4862 Жыл бұрын

    Video, expertly done!

  • @Trifiveguy
    @Trifiveguy Жыл бұрын

    You mounted the rad on the 6 cly side not the V8

  • @kevinfoley7704
    @kevinfoley7704 Жыл бұрын

    Go to the Summit retail store and build a junk '57 from off the shelf parts in a few days. It'll be fun they said...........A lot like David Freiburger doing an engine swap in the parking lot at Summit without the snow. Great series, but you can see the wear and tear on your team. Take it easy on the 2k ride back home.

  • @BigMouth380cal
    @BigMouth380cal Жыл бұрын

    Once again, you (Robby), Hillbilly, and The Boss are all quick thinking problem solvers. A.K.A. good mechanics. As much as I think Mr. Enthusiasm, a.k.a. Summit Guy, is a good marketing rep for the company, he seems to me to be long winded but a tad short on real experience. But I did watch the Summit video and I know it eventually started,,,,, . Actually, that video doesn't really make it clear but I suspect you or Hillbilly actually figured out the problem.

  • @SPHYNX99752

    @SPHYNX99752

    Жыл бұрын

    The summit guy is like Billy Mays if he was a wannabe mechanic.

  • @ridinwithwheelz188

    @ridinwithwheelz188

    Жыл бұрын

    Yes, he is a long winded fellow that’s for sure.

  • @jesseleesamples

    @jesseleesamples

    Жыл бұрын

    As a mechanic for my entire life coming from a family full of them, I feel like I have a good radar for being able to tell if somebody actually knows how to do anything or not. I immediately thought the summit guy was full of it lol. I can tell he’s one of the younger guys who went to some tech school for 2 years and learned how engines work in a book and on a computer screen but has very little if any real world knowledge or experience. We’ve hired a couple guys like that who could talk a big game but couldn’t diagnose a damn thing and would do silly things like break bolts off and forget to pump the brakes before pulling out after a brake job. He’s in a good job for that skill set though, he just has to film videos putting on brand new parts from the store lol

  • @ridinwithwheelz188

    @ridinwithwheelz188

    Жыл бұрын

    @@jesseleesamples I could not have said it better myself!! he has not been in school. Everybody has to learn sometime I understand. But experience something that college can’t buy. I have learned that over my last 35 years of working on any kind of combustion engine.

  • @ridinwithwheelz188

    @ridinwithwheelz188

    Жыл бұрын

    Pop quiz, any mechanic that has less than 10 years experience, if I brought my car to you and my cigarette, lighter was not working. What would be the very first thing you tried.

  • @davidvanausdle5387
    @davidvanausdle5387 Жыл бұрын

    Let me guess the right side and the left side wire harness to the coils are backwards

  • @ronaldolweiler7745
    @ronaldolweiler7745 Жыл бұрын

    Why didnt you get an under dash ac kit while you put so many kits in the car !

  • @yellowrhyno
    @yellowrhyno Жыл бұрын

    Thought of a name. Its a rust bucket so paint it gold and call it The Golden Bucket. Not a nugget gold but closer to like 90s mazda gold.

  • @battleaxefabandmachine
    @battleaxefabandmachine Жыл бұрын

    You guys have made the ls swap way more difficult than it needed to be. I have done that very swap and 41 others. Efi is the best way to go. Stock harness or aftermarket, stock gm ecm and roll.

  • @srdjanbjelanovic
    @srdjanbjelanovic Жыл бұрын

    This is awesome. I remember how this car was when my dudes at wd first got it!❤❤❤

  • @chrisl2398
    @chrisl2398 Жыл бұрын

    Your suspension should be loaded when making driveshaft length measurements..

  • @alucarder
    @alucarder Жыл бұрын

    Great video

  • @samziarek5114
    @samziarek5114 Жыл бұрын

    That guy and the Ford horn 😂😂 “This after a market. How fun”

  • @jamesrogers6376
    @jamesrogers6376 Жыл бұрын

    Robby. On 1330 yokes ALWAYS check the cap size. Some are 1and a 16thinch. Fords use 1 and a 8th inch cap.

  • @dreamlinerkoa6438
    @dreamlinerkoa6438 Жыл бұрын

    What did Hillbilly do? Steal all the plates from the Walmart parking lot 😂😂😂😂

  • @johnkranz4004
    @johnkranz4004 Жыл бұрын

    Nice work Guys we know it runs

  • @jw2218
    @jw2218 Жыл бұрын

    Great video the car is looking good

  • @raystevens687
    @raystevens687 Жыл бұрын

    Well Robbie you and Hillbilly gave it your all. And that's ok 👍 you can finish up when it's back in Utah.

  • @onion4620
    @onion4620 Жыл бұрын

    What Corvette?

  • @Wdhi59

    @Wdhi59

    Жыл бұрын

    The one at beginning of video

  • @reddog543211
    @reddog543211 Жыл бұрын

    Lookin good guys

  • @user-ne2so7we4e
    @user-ne2so7we4e Жыл бұрын

    @robbylayton might want to edit out Justin's 'F-bomb' just before the 26min mark - love you guys!

  • @greenbimoon
    @greenbimoon Жыл бұрын

    So exciting

  • @amateurshooter6054
    @amateurshooter6054 Жыл бұрын

    Thanks Guys

  • @tonycampbell9648
    @tonycampbell9648 Жыл бұрын

    Great work you guys should make it on the trailer

  • @ridinwithwheelz188
    @ridinwithwheelz188 Жыл бұрын

    Does Summit anybody Summit think summit sponsored summit this video? An ungodly amount of money….Summit!!

  • @brucebissell7626
    @brucebissell7626 Жыл бұрын

    really AWESOME!

  • @seng628
    @seng628 Жыл бұрын

    Happy 4 / July what day 🔥😭

  • @scottreeder7023
    @scottreeder7023 Жыл бұрын

    If you cut it to short just use a pipe stretcher to make it longer.

  • @randyweishaar3316
    @randyweishaar3316 Жыл бұрын

    Happy 4th of July to you guys at Robby Layton Nation!

  • @mikevan6518
    @mikevan6518 Жыл бұрын

    Fricken Hilarious!!!!!!!!!!!!!!!!!!!! LOVE IT

  • @davebenson1504
    @davebenson1504 Жыл бұрын

    Flying home sounds like a GREAT idea... put the rust bucket on a flatbed

  • @RobbyLayton

    @RobbyLayton

    Жыл бұрын

    That’s a terrible idea haha we just hope there Is a tiny bit of floor left when we make it back home

Келесі