Im mind blown that I just got the greatest run down on how putting works from a guy in slides, jeans, and a hoody. LOL! Cant argue with it. Better than any vids out here. Lovin it! Thank you. Cant wait for when you get to chipping

Probably won’t get that, but this was a great video nonetheless. The observation you made re: the hands getting a little back or forward and how that changes the face relative to the path was an eye-opener. Banking that.

That is easily the clearest demonstration I have seen yet of putting plane, face angle etc. What a great tool! Thanks Sam 😃

About 6 months ago I walked into a golf store. They had a large supply of putters and this place had a large practice putting area. It was raining outside so I hung around. Tried lots of putter then I picked up a lab putter force. I had only heard about and not much at that. So I tried it out. Man it felt really good and I could line it up easily. It just worked. I had no idea about torque control or press grip. The ball simply tracked and there was little tension in my hands and arms. But the price. I put club back in the rack and went home. But I couldn’t stop thinking about it. Read the reviews and so forth. Today I ordered one.

I had to watch this several times to absorb the notion that putter coming dead straight back on a line causes mild putter head arch relative to the cup. Well done. Very clear...

@labgolf

29 күн бұрын

Spread the word! It's a powerful thing to understand.

@eric1020

26 күн бұрын

You made one mistake towards the end -- you said "keep the shaft on plane and the head takes care of itself." You should have added "and keep the arc constant, i.e. stationary pivot point". Both are necessary, per your very lucid explanation.

OMG. Some people push because they get the handle ahead-- thats me thats me. Especially on longer putts. Sam you rock.

What a great vid, thank you for your passion for putting!

Awesome job Sam! The hands tip is an eye opener. Great stuff

One of the most useful video I've ever seen about putting!!! Thank you so much!! Just ordered DF3!! Can't wait to us ethe putter!

So helpful! Thank you!

100% agree with this. There is so much confusion around this very topic and this was a perfect way to illustrate the arc is happening but only relative to the target. It is not an arc on the plane of the swing. I already knew what an amazing salesman he was from the revealer videos. But this video is quite brilliant and I think shows why Sam is in the leadership role that he’s in. I just ordered a LAB last week. Got the Mezz 1 Max, looking forward to that first round with it!

wow... great illustration!

Lots of great information!!!

Excellent insight. Sam is way ahead of these other designers. Getting my Link 1 in the morning.

@jessehughes3877

11 ай бұрын

How do you like it??

L.A.B putters are great. I've had one for 6 months and have never putted so consistently qell iny life 👍🏻👍🏻

I got one of these bpards about 3 years ago, tried it for a bit and it's been growing cobwebs ever since. I pulled after watching this video and was pleasantly surprised how matching up the shaft with the different colored lines on the board helped improve my stroke! Thanks for posting this. Now i just have to find a fitting store near Sarasota, FL to get one of the LAB putters you are using 👍

@jgpratt2010

3 ай бұрын

You want to sell me your pboard?

mind blown... Ya'll need to do a forum at the PGA show with a couple of full-swing instructors demoing on stage!

Brian Manzella had a product like this and it was some of the best putting I’ve had when I used this method

Just placed my order. Can’t wait to try it with my Link. Always looking for great putting training aids.

@billyc8121

Жыл бұрын

That's 2 of us...link is in transit and so is this now

@labgolf

Жыл бұрын

You'll love it!

Mind so blown I’ve subscribed.

Also worth noting that if the centre point moves laterally (towards the target), there's less arc that you se on the floor. That arc only exists if the radial centre doesn't move. Some of us straight-back-straight-thru putters significantly move the centre along the target line to reduce the arc that's shown on the floor, ensuring more flat faces at impact.

The essence of LAB putter

3:10 and 6:22 are PERFECT examples of the putter extending from a point THROUGH the shaft to an endpoint! The face MUST remain square to the origin radius! The putter IS on a (slight) arc, which you are trying to manipulate by forcing it to traverse a straight plane, and working the face closed to the radius during takeaway, and open after impact!

wow..gold

Just impatiently waiting on my custom Mezz Max via my local shop to arrive... then my DF that I also custom ordered from LAB because... idk hahaha

Can se use it with a mezz1 max Broomstick ? Thanks. Rico

See-More Putters also have had this Lie-Angle-Balance, sine 1999...they call it Face-Balanced-At-Impact. Beautiful.

Great vid Sam. I am purchasing a Lab Broomstick mezz1 max and I just ordered this board as well, however, I am concerned thr may not be enough clearance at the base to arc the club head at 79.5”. Can you add a video showing how to use this with your broom? Thx.

@labgolf

5 ай бұрын

It's not going to work for a broom, unfortunately. It can't be positioned upright enough.

I just bought the MEZZ 1 max arm lock Will it match up with the board lines?

@labgolf

Жыл бұрын

You'll need to draw your own because of the extra shaft lean that's built into Arm Lock style putters

@kanenicholls263

7 ай бұрын

@@labgolf Hi Sam, any chance you could show us what we should be drawing to ensure we get it right?

How do you draw your own lines? I have a df

Im considering a LAB MEZZ. I use armlock with hands (apex) forward due to shaft lean. How will I have to adjust using the board to accommodate the shaft lean? Gary Barnes

@labgolf

Жыл бұрын

Yes, a putter will shaft lean will require you to draw your own lines.

Awesome Vid Sam. What’s the training device you are using please? Thanks.

@ryanschaul

Жыл бұрын

“the putting board” is what it’s called.

Super helpful. Love me new mezz1.

Watching this and the geometry is off. The ground track of the putter head (or any reference point along the shaft/putter) does appear as an arc, due to the vertical movement of the putter head as you swing it back. If you keep the putter grounded (an unrealistic stroke) the ground track would not arc, it would be perfectly straight back. That is because on an inclined planes the higher areas are offset left of the target line (for anything above the level of the target and offset RIGHT of the target line for areas of the plane BELOW target, which doesn't matter because you can't push the putter head underground). The putter face however does NOT open relative to the target at any point in the stroke. It stays absolutely perpendicular to the target line. However as you raise the putter vertically it becomes offset left of target line, but the face is still 100% perpendicular to target. In effect it is the same phenomenon as that appears in the ground track arc. The only thing that would cause the head to open relative to target line would be rotation of the shaft, which the board does not allow. The face angle does change by the way, but only in the vertical plane, in other words at you take the backstroke the putter face will remain perpendicular to the target line, offset left, and de-lofted relative to address.

Hey Sam, I have the DF, Mezz.1 and Link. Love LAB!! (I did crack up when you removed the shaft alignment aid and sure enough missed the putt!! 😂😂😂) Thinking about the Mezz Max in the broomstick style… thoughts??) Craig Thanks!!

@labgolf

Жыл бұрын

No excuses, but I do think we set up the putting board a little too far to the right. Have a you used a broomstick before? It's a fantastic way to putt.

@NelsonAerial

Жыл бұрын

@@labgolf No, haven’t tried yet. Do you or have you used the broomstick style? I used an odyssey mallet before going to LAB, but was a pretty terrible putter. I’ve dropped 4-5 putts per round with LAB. I’ve actually improved my lag putts going to Link. Would you recommend trying the Long Putter. It’s an expensive test to buy one!! Haha

@labgolf

Жыл бұрын

We have an incredible amount of broomstickers in the office. For some, it's transformative. Hit up customer service and they can tell you how to make a broomstick fitting video so we can dial in your specs.

How is this video the most effective puting lesson I ever got. Any chance Putting Board or LAB comes out with a DF3 version with updated lines? :)

@labgolf

3 ай бұрын

Glad to hear, and that would be rad! For now, the best thing to do is simply draw your own lines.

Link to this product?

Sam…thank you for the information and Demo. This may be a dumb question, but can I use this aid with my Mezz Max Broomstick ?

@labgolf

3 ай бұрын

Unfortunately, the Putting Board doesn't accommodate broomsticks at this time.

@user-pu5rn5cw1m

3 ай бұрын

@@labgolf Sam..thank you for the reply. Looking forward to the DF3 Broomstick. I’ll buy one immediately.

I went to your site but can’t find the training aid.

@ryanschaul

Жыл бұрын

He’s not affiliated with it. It’s called “the putting board” google it and you’ll find it.

Where do I buy one from in Australia?

@labgolf

Жыл бұрын

You can check our fitting locations (labgolf.com/fitting-locations/) or order from us online.

do you know if the putting board works equally well with broomstick putting style?

@labgolf

11 ай бұрын

The current product maxes out at a 75-degree lie angle, but we have been talking to the company about making some changes that we think would help our customers.

@Mat514Light

11 ай бұрын

Is there an update to this question? Have changes been made?@@labgolf

@labgolf

11 ай бұрын

It's not something that can be done overnight. It's a revamp of the product.

@Mat514Light

11 ай бұрын

I understand that. I just don't know how old this video is so I was inquiring about whether any progress had been made on that front. Thank you.@@labgolf

This is the same thing that happens when you sharpen a knife using a TSprof or Edge Pro style of sharpener.

Glad you got a pedicure for this video of knowledge! Now it is sold out!

🤯

What grip does he have on his? I don't see it on LAB site

@labgolf

Жыл бұрын

That is the L.A.B. "Simple Cord" grip. it's available on LINK.1 Custom and in our shop: labgolf.com/shop/grips/simple-rubber-cord/

@brendanchi2125

Жыл бұрын

@@labgolf Gotcha. His looks more greyish so that’s why I was asking

@Bassbaby838

8 ай бұрын

@@labgolfdoes the forward press grip work with the Link1?

Isn’t there another type of putting training aid that’s similar to this?

First time seeing this training aid.... HOW?

@labgolf

3 ай бұрын

Mind blowing, right? That's how we felt, too.

Nice job Sam. Put on some socks though.

I guess my question is if this training aid exists why bother with your type of putter compared to traditional putters? Just generally curious

@eric1020

26 күн бұрын

Because you can't putt with a board on a golf course.

Really enjoyed the explanation with the visuals but please get rid of that annoying background music.

@labgolf

Жыл бұрын

It's much more soothing than the noise coming from the build shop that it's covering up

pretty sure this is what Jesus looked like

just a thought: if our wait time is a month out on a custom putter... youre making enough money to hire people to make your customers wait time much shorter considering you can't "try" these putters any were. the mezz @ the pga store doesnt count.

@labgolf

11 ай бұрын

We're building out our team as fast as we can to reduce lead times. No excuses, but there is quite a bit of training we do we hire new builders. We know what our customers expect when they order a putter from us.

@drakedickey6802

11 ай бұрын

@labgolf again, you've had plenty of time to do this so our wait time on a putter that you can't try ANYWHERE isn't weeks out. It's the only thing keep you from my $1,000 dollars. Lol, do better.

@jboww196

5 ай бұрын

@@drakedickey6802 wow... you must be a lot of fun. You want a "custom' putter balanced perfectly and want in NOW. LOL. Take a lap.

@drakedickey6802

5 ай бұрын

@@jboww196 someones triggered. at this time.... they were behind because they were mass producing for the PGA super store. sit tf down, Mr. +18 lol