My understanding is a good DPF will run below 10mBar at idle and less than 50mBar at 3000rpm. What I didn't see at the start was what the DPF sensor was reading at idle and 3000rpm on the scan tool and does this match the gauge, A good man to watch regarding DPF is an Irish lad Jimmy at O'Rileys Autos on KZread. One thing he always says is find the cause as to why the car doesn't regenerate itself. Be very careful force regaining. A good video again young man as aways. 👍

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@101thenuke Great input!

great info & diagnoses .. thank you bro

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@CharlesCharles575 My Pleasure Bro!

Wow that's one quiet diesel!

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@ekimbrough1413 Yeah!

Thanks for the video. I also have a 2008.

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@Vanyoung66 My Pleasure!

great video.

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@motormotor Thank you!

I’m following along with your diagnosis and of the DPF issue. Thank you for sharing!

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@commshopctr My Pleasure! Thanks

Hi Kit, I love your troubleshooting videos, I guess you have one of those very expensive scan tools, do you recommend one that’s reliable? I will appreciate if you respond to my comment. Thanks again

@KITS_Auto_and_Truck_Repair

22 күн бұрын

@melaniopimentel6189 Hi, you can get an Autel scanner for a good price!

Wow. That's a big one. LOL!

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@ekimbrough1413 Yeah!

Grasias

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@martinarrieta248 My Pleasure!

Jeeeezzzz Deo that looks like a painful job!😒🙄

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@ekimbrough1413 it's not too bad!

What do I need to purchase to clean the DPF and where can I get it from? I have an 08 sprinter with a partially plug DPF.

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@robertheikkila4496 you can get this DPF Cleaner from your local parts sttore!

🚙

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@ShannyBananny07 Shanny Shanny!!

No glare Deo.

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@ekimbrough1413 Thanks!

Where are you located

@KITS_Auto_and_Truck_Repair

Күн бұрын

@Traveon2005 We are located in Frederick MD, you can email us at kitsautoandtruckrepair@gmail.com to schedule an appointment!

i wonder how it says 210 restriction when the engine is off it must be a memory from the last test

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@danman9017 I believe so!

@Stoney3K

2 ай бұрын

It probably is. The load value is calculated from the differential pressure along with the mass air flow, integrated over time. It will only reset if the differential pressure is lower, not just after a reset in the ECU where a new DPF is installed.

Can you blow it out ?

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@ekimbrough1413 I guess you could! But I chose not to

Finished watching the video and isn't that filter load a percentage number ie the filter is 2.10% full. That PSI gauge is not accurate enough. Get yourself a digital manometer to read mBar. In the video you haven't proved the DPF sensor is not at fault as Mercs are serceptable to sensor failures. I think you've condemned that DPF to early.

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@101thenuke I do need a new gauge for sure but the DPF was defective on this van check out Part 2 of this video!

I usually appreciate your videos, but not this time. You are not good on DPF issues

@KITS_Auto_and_Truck_Repair

2 ай бұрын

@80lukk How So? what didn't you like about this video? I'm curious and I value Great feedback!!