Did you guess the correct amount? Also, part 4 of the GT350 engine rebuild will be up on Saturday! Thanks for watching!

@stillinthegame1499

4 жыл бұрын

Great video! Take care! Have a nice day! 🙂👍

@arifqureshiarifqureshi217

4 жыл бұрын

You are so beautiful I like your car

@snakeboren4814

4 жыл бұрын

LOOKING FORWARD 2 IT DORIS!!!

@juangil8262

4 жыл бұрын

Woman.Driven If you can do more videos of you washing your cars that would be great

@PEACE_888

4 жыл бұрын

Woman.Driven $3300

This is the best thing that happened to KZread, a beautiful Latina with a car show. Your knowledge and love for cars is amazing keep it up.🇳🇮🇲🇽

@Redtailedhawk99

4 жыл бұрын

Jaime L well thanks for that. I was guessing that she was Latina from her slight accent, but you removed all doubt! 👍

@Nenzer

4 жыл бұрын

Damn wahmen can’t drive cars

@jaimel4740

4 жыл бұрын

I believe in a previous video. She said she was from Nicaragua Or her family is from Nicaragua.

@alonsoromero7283

4 жыл бұрын

She sounds American to me

@jaimel4740

4 жыл бұрын

I've never heard of the American language.

Thank you Doris for sharing your video with us. Great job on those brakes, can’t wait to see back on the GT 👍🏻💯

This Girl is Awesome! Beautiful and Talented..I cant even get my Girl to remember to put the gas cap back on tank when she fills it!

Great video - so satisfying doing the work yourself - and it saves money! 🙂

Subscribed!! Good stuff right here👍🏽

This is an Excellent example of working smart, safely, using the correct tools *correctly*, and documenting steps as you proceed! This is a good training for novice and experienced mechanics alike. Thank you for using bright, diffused lighting and shooting at good camera angles as well. Keep up the great work!!!

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very nice of you to say. Thanks for watching. Take care!

Another Job well done.. I love that your not afraid to tackle anything!!! Props..👍🏼

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very nice of you to say. Thanks for watching. Take care!

What the hell?!!?!? You guys get to track day AND autocross in February!?! I am in New York and anxiously awaiting driving season. Nice work on this video it was really good. You're very knowledgeable about cars I am always impressed. Wish I could be at that autocross! Have fun and make sure to grab a little content for us. Cheers!

Morning Doris, another great show, thank you, you have a great blessed day and keep up the good work 🙏. Much respects

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very nice of you to say. Enjoy your day as well! Thanks for watching. Take care!

This girl really knows her stuff, I used to be a mechanic and I can tell you she would run circles around a lot of the mechanics I worked with. She would flat out embarrass them all.

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very nice of you to say. I'm still learning everyday; however, I'm enjoying the journey. Thanks for watching. Take care!

Thank you I always learn something from you.

Nice one Doris, you got your own light sabre as well 😉 never liked drilled discs, they always end up in the bin and replaced with grooved, in my experience the heat dissipation with holes isn't worth it.... And yes they will fail at high speed/loads when worn.

Great job Doris! I agree if you can do it yourself, the savings are great! Great video like always! Have a great day!

You are fantastic at what you do in automotive aspects!! 👌 thankyou for the diy rundown👍 on the gtr brake job

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

I can't stop watching you and your channel I'm hooked!!! Kudos keep up your great work. btw, I have a 2018 GTR and I was wondering if you ever ran across the dreaded front clicking sound while turning at slow speeds ?

A WHILE AGO I COULD NOT WATCH YOUR VIDEOS BECAUSE I AM BUSY AND NOW I WILL SAY SO THAT I WISH A HAPPY YEAR AND LOVED THE VIDEO ❤❤

You're so good at explaining things!

Before I comment, who's chris? Your husband? It's great you actually do your work!👏👏👏 . I love the wide array of tools and supports you have to get jobs done! Also you balance work and your wardrobe tastefully!Good for you! I wish you could incorporate explaining the advance technology as compared to stock. Think about it! Keep tuning!✌

I used to have to go to Nissan school once a month we need a teacher like You excellent job of explain how things work

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very kind of you to say. Thanks for taking the time to watch. Cheers!

Watching you work is like drinking coffee early in the morning. Wakes you right up.😃 Man I can't believe how expensive that break job would of been.🙌 Hands down, work on your own car and save a ton of money, and you know it's getting done right

Super helpful. Thank you.

Damn hot! 🔥🔥🔥best brake change vid ever!

I just seen your video. I wanted and praise you for the good job you doing. And I was guessing somewhere between 2500 to 4000. But not $6,000. I hate to see how much it cost to have your coolant flush. That's why I do my work myself. But keep up the good work. I'm going to continue supporting you... cuz you do a good job. And you be good out there...

great job, I liked it a lot 👏🏽 just left it like 👍

Excellent video. Clear and to the point, no B.S., no super loud silly music, great camera work. Please keep making videos

I'm a diesel mechanic for caterpillar and I'm ASE master certified. Your doing a great job with all your awesome cars keep it up. I love you like working on cars that's so awesome sweety. Best of luck.

@user-di1dy2pi4u

4 жыл бұрын

😍😍😍😛😛😛😜😜🙌🙌🙌🙌🙋🙋🙋🙋🙈🙉🙊💋💋💋❤❤❤💜💜💜👍👍👍👍👍👍👍

@user-di1dy2pi4u

4 жыл бұрын

😻😻😻😻🙌🙌🙌

Yeah saving $4,400 I do it myself to great job can't wait to see you start doing your 5.2 l voodoo engine

@woman.driven

4 жыл бұрын

Same here.. video will be up on Saturday.. time to start planning for all the parts I need.. So I'll need some help from those who know :)

Hi Doris ! Hope you're doing well. Thank you for another great video, I enjoyed so much, very technical and very well explained, wow who would have thought that was going to be so expensive, and it's so nice that you saved all that money so you can use it on mods for the Hellcat 😉 How is everything going with the GT350 engine ? Take care and have a bless day 👋😊❤⭐

@woman.driven

4 жыл бұрын

Thanks! I'm happy you enjoyed the video. GT-R just means you pay more for OEM parts haha. Oh well, better parts for less :). A video will be up on Saturday. Have a great day!

Enjoyed the video again the second time around 🙂🙂🙂

You are such an inspiration love the vids and love that u do the work ur self and save money yeahhhhh buddy love it

@woman.driven

4 жыл бұрын

Thank you, I appreciate that. Thanks for watching. Cheers!

Great video you did a great job.

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

At lot of the guys we race with in class run GTR's because they are unreasonably quick on track and the entry cost for a used one if actually pretty decent. However the one constant I hear for them all is "Man, parts for these cars can cost a fortune" and in racing it's not if - it's when you break and ruin things. Always good to find cheap yet proven replacement parts. For instance we run cheap Centric blank rotors on our Brembo brakes - either way they have to be thrown away every 1-2 seasons and theres no performance difference.

My favorite thing about your videos, the smile and excitement is always genuine :)

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very kind of you to say.

Hi dorace U r very hardworking.... great video👍👍👍👍

THank you for posting this video, it is really helpful, but I have a few questions. 1. What type of loctite is that? is it specifically for this type of application, that involved a lot of heat? 2. What is that toll that you used to separate the pads from the caliper? 3. What is the torque amount on each bolt for the rotors? Thank you!

Wow awesome 👏 That’s a really appreciated they way you did Great 👍🏼 video keep it up 🤟🏽🤟🏽👏👏👍🏼👍🏼

I m so glad to see you once again with your new video and your lovely smile

@woman.driven

4 жыл бұрын

Thank you I appreciate it. That's very kind of you to say. Thanks for taking the time to watch. Cheers!

@anshumansingh6759

4 жыл бұрын

Woman.Driven I want to see u always with your preety smile and pray to God for completion of your dreams

super good work! i judt did my GS350 brake change by my self , love from canada!!!

YOU HAVE A GREAT CHANNEL. BEFORE I RETIRED I WAS A SENIOR TRAINING INSTRUCTOR FOR BOSCH NORTH AMERICA. I WOULD LIKE TO COMMUNICATE WITH YOU I REGARD TO YOUR MEASUREMENT RESULTS ON THE FRONT ROTORS. I THINK IT WOULD BE AN INTERESTING CONVERSATION. KEEP UP THE GREAT WORK!

Hi Doris, Amazing video with all the details. Just wanted to ask where did you order these Brake rotors and Pads?

Thanks for providing the details on the COBB Light from Astro Tools. Like the versatility of the light.

Nice work as always. I love the GTR. Did the brakes on my friends chevy Cruze for 100 bucks 😂

Super Woman to the rescue! Great video. Always wondered how to do the rotors and pads using the old hats. Now I can do my HC rotors when they’re due. The HC stock rotors are $1000 each from the dealer.

Hi D nice job on the brakes that hopefully should make a big difference on the track

@woman.driven

4 жыл бұрын

I'm betting so. They feel strong on the street. So let's see how they take the abuse.

So i just used Speed By Design for my 2013 R35 brakes. I got an entire set for under $1500, same performance, less squealing noise. SBD have a lot of R35 products on the way to make these cars more affordable, the owner was really helpful too!

Nothing better than watching a beautiful woman work on a beautiful car. Keep up the hard work the vids are awesome.

I have that same light love it!!!

Great content! Love your Superman Tee!❤️

@woman.driven

4 жыл бұрын

Thanks! I'm happy you enjoyed the video.

very good video .i love your v/blogs hope your all are well

Don't blame you Dorace I alway's do my brakes, oil change, plugs and plug wires myself and other maintenance thing but major stuff it has to go to the garage because I don't have the know how! Lol but when are we going to get an engine update I have been waiting patiently! Lmao

Another great show, Doris . Thanks !!!!!!!!!!!!!!

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

Great job..thank God you know how to do this stuff..6k is crazy!

She makes it looks so easy👍🏻...

Beautiful and nice and safety to use...that's good Dorace,....

Your amazing at what you do especially when you have your clumsy times 😂💯❤️ keep your your great work I love what you do💯

my advice is to look at the weight on the tire side of the spring , it's entirely detrimental to have weight on that side of the springs. it's why you drill holes through the rotor, it really doesn't have any larger effect on Cooling, but it does get rid of weight you really don't want. Slotted rotors heat up your brake pads very quickly, some brake pads need higher temperatures in order to work correctly halk HPS would be an example . The carbon content of the rotors is fairly critical to this, cast iron is still very strong at extremely high temperatures. Lower carbon rotors or high nickel content may have a higher coefficient of friction and it may seem like a car and stopping better, but push them to higher temperatures and you will see what melts first. Anyway, you seem quite fantastic. But don't underestimate the reasons why you're thinking Nissan was designed the way it was. I'm reasonably confident you can't get better results with slotted rotors

Thank you for a new video I missed you girl.

@woman.driven

4 жыл бұрын

Thank you and thanks for taking the time to watch. Cheers!

love the channel! especially the gtr videos.

@woman.driven

4 жыл бұрын

Thanks! I'm happy you enjoyed the video. Have a great day!

Good morning Doris, another good video, I love that you're always teaching us new things, my cost price is $750 have a good day and keep up the good work

@woman.driven

4 жыл бұрын

Thank you, I appreciate it. I try to teach :) $750 would have been no issue :)

@deanerskine848

4 жыл бұрын

@@woman.driven 😂😂😂😂you're welcome

Loved the super Woman shirt. Great vid.

Just incredible ty keep up the great work it would be cool just to help you, you do thing like I do takes a little while but it's satisfying in the end keep doing your thing love it good Job 😀😊

"I'd have to move the hellcat, the gt350 and BMW....". Stop flexing on me Doris lol

@woman.driven

4 жыл бұрын

lol.. I mean.. if my garage was wider..no problem :).. The GT350 will be a pain to get up on ramps though.

Great video as expected. The only issue I could think might be with the blue loctite. If you put all the bolts in at once doesn't the loctite already semi set up before you finish bolting and setting the torque specs for every bolt. The set time is about 10 minutes so hopefully you got them all set within that short window of time. Love watching your explanation and work ethic.

@woman.driven

4 жыл бұрын

Thanks! I feel I gave myself enough time. I didn't feel much if any resistance when torquing them. The issue is they have to be tighten in an even order, so that sort of delays it. Thanks for taking the time to watch.

Another terrific and enjoyable video. I'm guessing just north or just south of 2K for the job at a dealer shop.

This is so cool 😎 a woman that works on cars a real game changer 💕

Good day Doris..DIY always save 💵!!! nice job on those brakes. you have almost a shop in that garage..not to mention that Chris have the most beautiful mechanic in Arizona. U R my hero... saludos!!!!

Great Job Doris!!

@woman.driven

4 жыл бұрын

Thanks! Take care!

Thanks for the video You're so awesome

@woman.driven

4 жыл бұрын

Thank you and thanks for taking the time to watch. Cheers!

Great video Doris you are the best 🙏🤟👌

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

Glad to see you again I missed you

DBA make good rotors, my XF6T was warping OEM rotors in less than 8000km with the hill driving I was doing. Replaced them with slotted DBA's and 40000km later they were still going well.

Great video and good savings!! I'm kind of wondering why you didn't say anything about maintaining the brake fluid. When replacing the pads/rotors is an ideal time to replace the fluid.

@woman.driven

4 жыл бұрын

The video was already way way too long to begin with. I did have the blower bleeder on the table during the first part. I will do that quickly off camera as I've done way too many on film. Same process :)

Do you feel it’s worth it just to get another 2 piece rotor (ring and hat) so that you can take your time to replace rings when it comes time to do brake job?

HI Doris, You have given me the confidence to get this done on y own GTR. Can I ask you to provide the torque settings for the caliper bolts

Good video once again. To answer your question, taking your car to a dealership to change brakes and rotors, will cost you around $5,000. I had to find an alternative to change my brakes and rotors on my 392. This hobby is very expensive.....😂😂😂 very good video once again.👍🏾👍🏾😂

Wow u are so awesome.I got my 468 big block chevy sold.And i bought a 540 stroker engine pushing 720 horse's no turbos or chargers..All motor horse power..Love all your cars..Okay most awesome chick ever.You have a great week..Much Aloha

GREAT VIDEO DORIS!!!

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

@snakeboren4814

4 жыл бұрын

@@woman.driven WELCOME!!!

Yess you are wonderful all the time I’m a big fam of your channel and your car collection is amazing and awesome keep up the good work it would probably cost you about $3,500 to take the GTR to a shop and replace everything with OEM parts probably more lol

If you mount a dial indicators, opposite of each other, on the spindle and rotate the rotor, you can measure runout as well. This is a quick way to check for warped rotors.

I notest the coment about the drill on the disc brakes...they are made to no happens the vacuum between the pads and disc when under high pressure and temperature, take care about how hot your brakes will get, this tiny holes help with dilatation too, we can consider they absorb the fast dilatation under a heavy and short braking, or simply to much heat. greetings from Brasil

Hi Doris! Awesome video..... you are right it is nice if you can do it yourself. You do save a lot more money when you can. Have a great rest of the week! Cheers 😊

@woman.driven

4 жыл бұрын

Thank you! Yup..that is very true.. I save on labor. The rest is just looking for better option that don't tax you on the GT-R name.

Interesting use of the quick jacks

Good work Doris 😀

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

Another great video doris

@woman.driven

4 жыл бұрын

Thank you, I appreciate it. 😀😊

Doris , another great video ! : )

@woman.driven

4 жыл бұрын

Thank you and thanks for taking the time to watch. Cheers!

Hi Doris you did a really good job doing this Brake Job you explained it very well and by doing it yourself you probably saved around $7000 by not taking it to the Dealer nice job 👍

@woman.driven

4 жыл бұрын

Thank you and thanks for taking the time to watch. Not so much, but a good amount lol. Cheers!

Good job 👍,good choice on the choice of pads,the highest level of pads would have required too much heat to be driven on the street.

@woman.driven

4 жыл бұрын

Thank you. That is correct, although better for the track, it does not make much sense without proper tires and heat. Thanks for taking the time to watch. Cheers!

Hi doris , nice job as always, how much did ot cost you in parts?

Amazing video doris the GTR looks better now with the new brake pads and rotors @woman.driven 😊

@woman.driven

4 жыл бұрын

Thank you, I appreciate it. I love the way it looks. Can't wait to try it out.

@frankymaldonado1068

4 жыл бұрын

@@woman.driven your welcome can't wait to see how you will do with the GTR at the drag strip @woman.driven 😊

Boom hit nail on head.....thought you were talking the aftermarket parts.

6 grand I would diy to good job and you saved a lot of money keep up the good work and keep doing these videos because you teach us a lot.👍

great video nice rotors fantastic dean form malta

@woman.driven

4 жыл бұрын

Thank you, I appreciate it.

Haha I just realised something pretty rare... for once the woman has all the loud cars and the fella has the quiet one! Haha that’s awesome! Good work Superwoman...

Very good job!! Salutations from Belgium!

@woman.driven

4 жыл бұрын

Thank you, I appreciate that. Thanks for watching. Cheers!

Hope you had an amazing b-day Doris Love watching your videos your are soooo gorgeous ❤️❤️

Yes, more GTR content, thank you Doris!!!

@woman.driven

4 жыл бұрын

Yup..will do :) Thanks for watching!

Did you change the break fluid?? Good idea to do it at the same time.?

great Im so proud of you..dorace go bless you..

Not gonna try and guess the amount lol I'm going to go with that it's very expensive. Can't wait for part of engine rebuild loved ur super t shirt I have an eclectic assortment myself 😉😀😀😀😀 ur awesome Miss as always.

@qward2174

4 жыл бұрын

She says it in the video 👍🏾