Why LED Lights Bulb NOT Working for Your Vehicle? | How to Fix Flicker/Error/Blinking? Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more LED knowledge and installation videos! Fast Bulb Finder for your vehicle: allalighting.com/pages/bulb-finder-shop-by-vehicle-led-light-bulb-car-truck

This is incredibly informative! Specially like me who just started with cars! thanks!

I like the information presented here, I would like to make one observation however, be hyper flashing due to a standard halogen or incandescent bulb in a burned-out is exactly why you know that you have a turn signal burnt out.

Lol 😂now I understand why. So here’s my story. We got two 09 Pontiac Vibes I put LEDs from front to back on both. No issues whatsoever. Well, I decided to do the same on my 2007 Dodge Ram 2500 so,I ordered all the LED light bulbs for it,and I got all the issues described on this video. Great info. Thank you.

@rudydaberry122

3 ай бұрын

My dad’s 2007 ram 1500 is having issues with LEDs. What did you do to fix your dodge?

Wow I didn't expect this single video to explain everything about this.

Wow free class ! Thank you!

@AllaLighting

2 жыл бұрын

No problem.

Superb video, very comprehensive coverage.

@AllaLighting

3 жыл бұрын

thanks

This was really helpful and informative 😃👍

Excellent presentation of the information. Well Done

Very helpful! I just installed morimoto xbs on my 18’ Tacoma Trd Pro and they look nice in sequential with emergency lights but soon as I use turn signals it hyper flashes my turning lights 😒

Great informative video! Keep up the good work

This video is filled with information. 🙏

Thank you for that information, very informative.

Great video! I have a 2006 Mustang GT. I have all LEDs except in the front turn signals. I’m having an issue with the 194 LED license plate bulb. It randomly turns off usually after an hour of driving the car. When this happens it turns off the rear park lights too (1 of the 3 tail light bulbs on each side. The turn signal/brake lights are not affected). If I cycle the switch on and off everything works again. I used to have no issue with other LED bulbs. The issue appeared when I switched all tail lights to VLEDS V6 extreme bulbs and the plate light too to a VLED bulb. These tail light bulbs use constant circuitry and they do not hyper flash without resistors. I have tried 2 other bulb brands with the same issue. The Sylvania brand I tried turns the bulb off after a few seconds unlike the others that take longer to turn off. It seems I need a 100 ohm resistor on the plate light. But I’m not sure how to install that for such a confined space. Maybe a CANBUS plate bulb is the solution. Any feedback? Thanks!

Wow l never se it this video very good job was excellent video thanks

I have 1987 ford E250 campervan I would like to change it over to all led .I know it uses 1156 1157 194 Amber turn signal in front and dash Cluster lights. Not sure where to begin. Video has helped some

Great. Nicely explained........

I knew that dodge line was coming 1:18 Been having a real fun day with my jeep 😂😂😂

@ElantraFukkenGang

Жыл бұрын

“Headlight flickering is very common on jeep vehicles” 😳I should’ve done my fukken research man 😂😂

Hi @AllaLighting, I have installed the Maxx-Link Led AMG Series 200w headlight from a Halogen bulb(stock 55W) to a Led headlight of 100W each(left and right). And as you mentioned in the video issue, the headlight sometimes gets randomly Off I am facing the same issue. But I could not get the proper solution from the video, as Led has the CANBus connector and it connected socket to socket. So, can you please share the solution for the issue of the random Off. Scenario - When I drive the car for 30 - 45 min with Headlight ON it works properly, But when I turn it Off and once again turn it ON it did not get turn ON quickly it takes near about 1 - 2 minutes to get started & turn ON. Once it is ON after 1 - 2 minutes, sometimes either one side led headlight takes extra to get turned ON. At last both the Led headlights turn ON but after some minutes of delay. It will be really great of you for all the support and solution for the issue. Led Used - MAXX-LINK AMG SERIES 200W CAR - SKODA RAPID 2013 MODEL STOCK HALOGEN BULB - 55W UPDATED LED - MAXX-LINK AMG SERIES 200W

Great video, hoping you can help with a problem. I just put LEDs in my 2005 Chevy avalanche ls. The signal lights flicker and flash so I've already ordered the resister. But my DRL wont come on at all, its not the relay or fuses, will a resister work or do I need the DRL relay or resister kit? Looking for the most economic solution pls.

11:27 That's not Ohm's Law ... that's the Power Equation. The two often get mistaken for each other.

It’s in a 2007 dodge ram 1500 as well

Very good info

Having a problem where my leds won’t work at all? If I plug one halogen and 1 led then it works but if the halogen isn’t in then the 1 doesn’t work either? Appreciate the help thanks. On a mx 5 mk2

I bought a LED front signal housing which have pre-installed LED resistor. When I start my car and daylight turn ON, the signal blinker is hardly noticeable.. it's kinda like dim a little and blink... hardly noticeable on bright Daylight. if Daylight is OFF or headlight is OFF, the LED blinker normally like normal OEM bulb. What do I need to get the LED front signal works normally? LED blinker relay?

Hello I know this is an older thread. I figured I will ask anyway. I have a 2016 jeep Cherokee with Holagan bulbs. I switched to led bulbs. The lights themselves work great, however I do het only 1 message " low beam out " . The stock lights are 9005/9006, so my question is 8f I buy a canbus decoder would H8/H11 work for my vehicle? Thank you, any assistance would be greatly appreciated.

My 03 Tahoe my LED headlights has hyper flash when the headlights are on only and while using the turn signals,because it only happens when headlights are on using the turn signal . And don't have any other led bulbs anywhere else

I have 2014 GMC Sierra with Spyder after market lamps. Years ago I installed them with LED Canbus bulbs with no issues. Recently one of the H7 bulbs has become dim. I can no longer get the original LED bulbs. I purchased a set of Auxbeam GX H7 LEDs. If I put the ignition in the aux position and turn the lights on, they light and stay lit. If I start the truck and turn the lights on, they light and promptly go out. Any thoughts or input?

Hi, Today I replaced a light bulb (5w halogen) located near the pedals, and before I changed it, it used to work few seconds after I open/close doors. Today I replaced it with a beautiful Led T10. It works but now is still on even if I am driving. I like it but.. Is there any problem? Do you recommend me going back to halogen in order to avoid other issues? Thank you in advance!

Very informative video, I definitely appreciate all the information. I have an issue at the moment, hopefully you can make a suggestion? I had a 2010 Lexus Gs350, which used PWM. It had an Led 9005 drl/highbeam setup with decoders. I am now trying to use the same setup on a 2001 Lexus ES 300 and only the high beams work but not the drl. What would be the best solution to my issue?

i just fixed mine yesterday after installing these resistor ..no more codes on dash

How I fix the reverse lights not detecting in an Audi Q7 2015?

H11 LED bulbs will not come on at all in 2012 Mazda 3 SkyActiv sedan. Work fine in low beam headlights though.

Very helpful video

Help, I installed a high beam H3 on a VW, and turn on diemed when turn on side lights and work normal when turn on high beams

2018 Chevy Impala LT. I’ve gone through a lot of different brand lights, Lumens and all.. found that the only ones that don’t flicker are the ones that don’t have an external drive. But the ones I have in now will only insert one way and I’m not getting the full view of the lights… they look like Halogen but white.. have you ever had anyone that had this issue and maybe solved it?

My reverse LED bulbs have no issues. 👍

Soooooo how do you fix random off. I'm having this problem on my 2015 Ram. I had the anti flicker mogule. The bulbs them selves have the canbus corrector and it still does this. They work fine for a while then shut off randomly. Then come on after a while. Or sometimes stay off for good. I switch polarity on both and still nothing. Any help?

@VTOWERS915

3 жыл бұрын

Did you figure out how to fix it

@710_crawlers

3 жыл бұрын

I have the same issue on my aftermarket Lexus headlights

@roberturquides-swann4953

Жыл бұрын

I have the happening to my passenger high beam hl

How do I disable the system that detects non-canbus bulbs via scanner?

2015 dodge Challenger bought led Headlights..led lights work but shut off once car is turned on.. any recommendations on how to fix this issue??

My led bulbs flash at same speed as stock bulbs but flasher relay goes faster . And have an error message saying there is a faulty bulb, this is on my 2015 vw transporter t5.1 any idea or suggestion plz

I have 96 F250 , just changed front and rear bulbs to LEDs, front bulb is a running yellow light/ turn signal and the rear is brake, turn signal. when I install the 3157led tail light bulb. Everything work fine except the left turn signal would not activate or flash, this is one I changed first. How can i fix the problem? Oh , I reinstalled the standard 3157 Halogen tail light bulb back in the rear and the first Led and rear standard bulb flashed fine.

Many things happen when I installed my lasfit led bulbs. It interferes with my backup camera, sometimes my high beams shut off. My dash lights go to full brightness. I lose control over adjusting brightness.

I have 2012 Toyota Rav4. I installed 9005 LED bulb as High beam and 9006 LED as Low beam. 9005 LED should work as DRL and High beam, but DRL is not working and not flickering as well. If I install Canbus decoder, will it make 9005 LED DRL work? Please advise.

I want to upgrade my 2008 Toyota Hiace. What do you recommend, as in led’s, resistors, cambus etc?🤷‍♂️

Hi Guys! Im having a bit of an Odd issue with a 14 kia forte, installed some 60w led bulbs and when they have not been used for a while they turn on and immediately turn off, after turning them back off and on a couple of times one will stay on and then finally both! Seems to do it while the bulbs are still cold! Thanks!

I just bought some led indicator bulbs for my Peugeot 207 and now I got hyper flashing 😔😢 is it true that load capacitors can easily burn out? Bit weary installing them 🤔

So what would help a Jeep that has plug and play bulbs installed and they randomly turn off when you’re driving?

I installed a bulb with a canbus attachment on my Ducati 2014 motorcycle and it worked like charm. I had some separate issues with my wiring though which I fixed by installing a thicker better quality copper wiring kit than the OEM one. This resulted in random on-off, or delayed Ons... until a complete off now. What could be the issue?

I got 2010 Accord, put LEDs, 9006 for low, 9005 for drl and high beams, it works for drl but doesn't show on dash that's it's drl, lightly lit up, then when i turn on high beams, it turns full blue, it works well the LEDs so idk

Hi Alla I got a vauxhall zafira 1.8 SRI on a 57 plate, can you advise me what I need to get for head lights and back and side lights please

Will incorrect upgraded bulbs (LED) mess up wires in vehicles while parked or driving????

Ok this is good info but what about led headlight slowly comes on and off when there is no power getting to it For example 02 Honda Odyssey light and auto light switch is off but passenger light only try’s to come on very slow flickers and go bright then very dim and flickering sometimes it will turn off but not for long until it comes back on again doing the same thing When I turn on the headlights there is no problems low and high beams work no flickering no dimming just a nice bright lights Please help Would it be the led light malfunction or could it be a relay problem

Great video!! Need some help with the following, I installed LED fog lights and they work fine when engine is NOT running. As soon as I start the engine the fog lights blink two time and then turns off. I would very much like some guidance as its driving me crazy as I'm finding it difficult to a solution online.

@silentscream0512384

3 жыл бұрын

The bulbs are 12 volt only. Get bulbs that are 12-24 volts. When the car starts the alternator runs and brings the battery power up to around 14 volts. Led bulbs that only function on 12 volts won't work unless you have a resistor on the positive wire

I have a 2012 nissan rogue. I switched to led bulbs but now i find the DRL is really dim. How can i fix that?

I have a lights bulb error code on my 2015 Jetta, which one must i buy the decoder or the resistor?

Hi I have a Chevy Silverado 2020 1500 custom with halogen lights, I bought a set of LED headlamps , it fit perfectly and the harness as well but the lights doesn’t turn on any advice please ?thanks.

How to fix the random off it happens on my golf mk5 parking light

help just put led headlamps in my 2001 tundra now my fog lights dont work and when i turn them on my bright lights come on

My Dodge Ram says lamp out

2002 Tundra. High beam is always on one side or the other. light icon stopped working on the dash. any idea how 2 fix?

Chrysler 200 2012 my leds flicker and turn off and on slowly once in awhile what do I have to do to fix this problem

Installed LED low beam lights, they work, however the high beams no longer turn on. Volvo V50.

@AllaLighting

2 жыл бұрын

Please try to install the LED resistors. If you are not sure which one, please contact us by email service@allalighting.com by providing order details, issue, and vehicle's Make, Year, Model, Application, we will be glad to further assist you.

So what would cause a 2013 ford focus to fail when adding led headlights that are on a single plug per each side

@Callie83

6 ай бұрын

I just learned the hard way. Installed LED canbus bulbs for low beams. Car starts lights good. Then, one or both shut off. After manually turning them on and off a few times, they will stay on. I also get the dipped low beam warning. Did you find a fix for this?

My issue on the 2012 vw passat I have is they'll hyperflash only when my car is starting

Hi I have c32 amg Mercedes so I switched my parking lights to led and they will not turn on and some time work and not work so what Resistor should I buy

I had a rear brake light bulb out on a 02 dodge, oem halogen bulb. I installed a sylvania LED on both side and now I have no brake lights at all. Can u help me understand what I need to do to run led bulbs in a 02 Ram

Would the LED flasher relay work on a 3157 turn signal and brake light (in one)

@ElantraFukkenGang

Жыл бұрын

Nvm, it wouldn’t work in my application due to the blinkers being controlled by the TIPM rather than a flasher relay :(

I have a 2009 Ford Edge and I put two red cheap led bulbs in the tail lights and with 6ohm resistors my left flashes correctly and my right hyper flashes so would can bus bulbs work better because this car has a BCM module for lights no flasher

@AllaLighting

4 жыл бұрын

do you meet the led signal light bulb hyper flash or the headlight flickering, please advise for further assistance.

@AllaLighting

4 жыл бұрын

Please check whether the right side resistors get hot when right turn signal light is activated.

hi there. i just upgrade my bmw X1 E84 headlight from halogen to LED, but all the LED flicker for few seconds when i start the engine. and the high beam flicker from left and right every 3 minutes. any suggestion? thx!

I installed an H11 high-beam led in my 2019 hyundai tucson but it turns on for a second and comes off. Help, please!

@ahmadasfour7298

Жыл бұрын

Hey i have a 2019 Tucson and I upgraded my high beams but they are 9005/HB3, not H11, id get 9005 with a decoder. I have no problems. Installed since 8 months. Nightlight 9005HB3 mate.

great video thx ..... and i NEED UR HELP !!! i want to buy leds from u guys but i need to know if i need decoders or relays or ?? i have a 2006 ford f350 super duty and i want to get headlights bulbs they are h13 i also want fog lights bulb they are h10 i also want led turn signal. led interior lamps so DO I NEED DECODERS for any of this applications ??? thx

do you know how to get rid of that ripple voltage coming from Alternator i have a new car, I've replaced all the halogen bulbs in my Car with LEDS & they all work flawlessly but as soon as i turn on the engine all the LEDS starts flickering a bit especially at low RPMS, some branded LEDS that I've installed in my license plate & tail lamp has it's own built in circuit due to that it flicker bit less but ones without PCB ( cabin light) they flicker decently, eventually all of them flicker as soon as i start engine, just intensity is different on each bulb, Any way to get rid of those flickering due to Ripple current coming from Alternator? It's not flickering as much as Jeep vehicle you shown but it's close to that! please tell me how to get rid of it!

I have a 2012 Honda accord the only passenger side headlight bulb turns off on its own. What is the solution?

@AllaLighting

3 жыл бұрын

Honda is usually very DIY friendly, we don't have any problems when replacing with LED headlights on our 2015 Honda Accord, the issue could be a defective bulb on passenger side, please switch both LED bulbs to the opposite side and check if the issue follows the same bulb or stay on passenger side.

@w7sh5555

3 жыл бұрын

@@AllaLighting I tried a new set still after a few weeks sometimes months the left side bulb stats flikering, and sometimes it turns off on its own (only the left side) I tried cleaning it with contact cleaner (special cleaner for electrical equipment) still the same. I am thinking that I should buy a resestor or canbus to solve the issue.

@AllaLighting

3 жыл бұрын

@@w7sh5555 Yeah, you can try to install the load resistors to check whether it helps.

Having flicker on the driver side headlight of my 07 F-150. Using an LED bulb with attached CANBUS. This is the second LED I've put and driver side is still experiencing issue. Switched bulb with passenger side and issue persists but only on driver side. Any ideas?

@AllaLighting

3 жыл бұрын

Thanks for your watching, would you please email us the LED headlights bulbs information and advise the issue details to service@allalighting.com, for we need more information to troubleshoot, thanks in advance.

@williamelam6754

3 жыл бұрын

Mine is doin the same exact thing. Only in my Silverado smh. I paid good money for these lights and this is the main reason I got rid of the hid’s... cause they wouldn’t work!!

HELP!!! I have an issue which I was hoping you could either help with or get me pointed in the right direction.. (but first, great video!) I have a 2018 Chevy Malibu and recently bought a 5-function LED tail light strip (brake, turn, running ect.) but learned it won’t be just a simple ‘wire to wire’ (so to speak) type of installation because my Malibu has a single filament bulb so the brake,turn and running lights are all sharing the same line. How do I wire this multifunction LED strip in a situation like this?? Any help would be greatly appreciated!

@AllaLighting

3 жыл бұрын

Sorry, due to it is not our product, we don' t know much about the product, it is recommended to contact the seller for the troubleshooting.

I recently purchased 3157 style of Alla lighting bulbs and when plugged in they are Always bright all the time won't blink or anything just always bright all the time. Tried different vehicle same out come. No resistors or anything. Any info will help.

@AllaLighting

2 жыл бұрын

Because we are not sure your vehicle's information and LED version, please contact us by email service@allalighting.com by providing order details, issue, and vehicle's Make, Year, Model, Application, we will be glad to further assist you.

Can you tell help me out please I changed the reversing pulbs to led on my vw caddy 2012 now the fog lights are one

@AllaLighting

2 жыл бұрын

If you have installed fog lights to LEDs already, then we recommend try to install the resistors for LED fog lights

Great information!!! I recently encountered an issue replacing a conventional halogen H-7 bulb on a 2010 E-350 Mercedes Benz to an LED H-7 Las Fit . Sure enough, neither side of the low beam headlights wouldn't work after converting it to an LED bulbs. Needless to say, I had no choice but to put the old halogen bulbs back.. Question to everyone, would I get a better result converting it to an HID lights? Please advice... Thanks everyone...

@AllaLighting

2 жыл бұрын

HID has quite high illumination light output, yet the issue is the beam pattern is not focus and will glare other drivers and also it will take some time to start on.

I bought a pair of led strobe lights for my brake lights but after they fllash they stay on but if i remove my feet from the brake they keep flashing...same goes if i turn on the low beams they keep flashing after y stop pressing the brake pedal but not as strong as when i press it....can someone help me...i got a ford focus se 2013 sedan....

@AllaLighting

2 жыл бұрын

Please try to install the resistors

How many uF capacitors do i need for 17W H7 leds.

I have a 2013 ford focus and I have tried 2 different types of led bulbs and it errors out each time but on my tail lights they just stay on for hours and I have an error saying brake light failed

@Callie83

6 ай бұрын

I just learned the hard way. Installed LED canbus bulbs for low beams. Car starts lights good. Then, one or both shut off. After manually turning them on and off a few times, they will stay on. I also get the dipped low beam warning. Did you find a fix for this?

I got a load resistor because I have a Mercedes’ and the led lights still turn on and then immediately turn off and it attempts to turn them back on and then they just turn off again. It’s annoying. The resistor didn’t help

@AllaLighting

2 жыл бұрын

Then you need upgrade a more powerful LED, the one you purchased maybe not powerful enough. If you need our help to locate the correct one, please contact us by email service@allalighting.com by providing order details, issue, and vehicle's Make, Year, Model, Application, we will be glad to further assist you.

Excellent information question I put LED in my TSX 2019 and I’m having now a message DLR problem what do you recommend to me decode bus?

@AllaLighting

3 жыл бұрын

Thanks, and for your vehicle, extra resistors are required, would you please advise it is for low beam, high beam or other application? thanks in advance.

@vegale1

3 жыл бұрын

@@AllaLighting hi it’s for hight beam and day lights running

2010 Dodge Ram 1500: I want to replace the tail light with a ZEVO Sylvinia LED. Do I need the resistor? OR, can I just replace the blinker relay with an LED compatible blinker relay? Thank you

@AllaLighting

3 жыл бұрын

Blinker relay is for LED signal lights, yet for brake tail light, extra load resistors are required to avoid the error code.

I just bought led headlights from xenon pro for my 2006 dodge Cummins. I bought the 45 watt 6k lm with a led capacitor for flickering all from the same site. I have installed the lights and they work good when the truck is off once I start the truck they flicker and shut off. Any advice for me please?

@ryanbarton7796

4 ай бұрын

i’m having the same issue on a 04 ram 1500, bulbs work perfect when truck is turned off. but as soon as i start the truck the bulbs start to flicker

I have a 2010 e350 , I installed led lights and the resistor, I will work for 20 minutes, and then go completely out ,after 2or 3 minutes they come back on

@AllaLighting

2 жыл бұрын

Because we don't know the LED lights bulbs you purchased, please contact us by email service@allalighting.com by providing order details, issue, and vehicle's Make, Year, Model, Application, we will be glad to further assist you.

I switched from halogen to led front low beams 08 c300 benz & got (check left right low beams & check eng light)so i took them out..eeek

I own a 2013 Hyundai Sonata I installed all LED lights all around about a week after the install one of the dlr the passenger side flickers between dlr and high beam while the driver side doesn’t and the computer trows the tps light on what do you recommend me to do?

@AllaLighting

3 жыл бұрын

There is a dust cover for high beam bulb, so we recommend to try plug and play decoders first, if the code does not reset after a few days driving with decoder installed, contact us for further assistance to install resistors.

I installed LED on my 2015 charger with antiflicker module, randomly it turn the bulb off and go on after 2 sec, what cause this problem?

@AllaLighting

3 жыл бұрын

It is recommended to try the load resistors to see how they work. For Dodge charger, it requires more powerful LEDs and resistors to make it work. If you purchased from us, please email us service@allalighting.com your issue detail. order number and vehicle's information for further assistance.

Bought an LED for my 2016 Dodge Charger and I get the random off. How do I fix this?

@AllaLighting

2 жыл бұрын

Please try to upgrade to our newest CANBUS bulbs, link is allalighting.com/products/can-bus-9005-led-headlights-conversion-kit-bulbs-9011-hb3-white or installing LED resistors for the existing item: allalighting.com/products/9012-9006-9005-led-load-resistors-headlight-flicking-error-canceler

Hi installed 9005 led Can bus ready on toyota corolla 2012 for DRL and for long beam working but for day run is flickering. Any suggestion?

@ethanf8855

3 жыл бұрын

Same problem on my 2010 Mazda 3 my high beams and my low beams are super dim and flicker

@aaronbuck7265

2 жыл бұрын

Need a DRL relay kit. Starts around like 14mim mark. But will run at full power(high beam).. So maybe the DRL relay kit then a resistor to each bulb to keep it dimmer than the lowest headlight.

I have a 2013 toyota corolla and am having an issue with my new LED headlights. I have both low and high beam LED'S, if the car is off and I toggle the light switch, all lights work as they should but Whenever I turn on the car, only the high beams turn on automatically, but at half strength. Mind you the light switch IS OFF. So I can't shut them off. It will remain this way until the car is shut off. I tried two different brands with the same result. Also, i do not find anything anywhere addressing this problem.

@AllaLighting

2 жыл бұрын

This because your vehicle's high beam share the same bulb with DRL, so at daylight, the bulb will turn on as DRL, at night, when you power on low beam, then the high beam/DRL will shut off. If this answer is not helpful, please contact us by email service@allalighting.com by providing order details and issue, we will be glad to further assist you.

@thedad1977

6 ай бұрын

Lol. Your issue is they won't perfectly as intended. Believe me that's not a bad thing i tradé with you my drl led issues any day. Lmfao. Jk. Lmao. 👍😎⭐

Hello. I bought a set of led headlight bulbs, both high and low, for my brothers 2008 dodge avenger. They work just fine when the car is off, but when the car is on the passenger and occasionally the driver side bulbs will turn themselves off for a while, then randomly turn themselves back on. The high beams do the same thing at a more frequent rate. From what i gathered from your video this is a dodge computer issue not playing nice with the lower power consumption of the led bulbs. My question is do we need a resister or a decoder to get these to work correctly? I see there are many different kinds available online I just need to make sure I order the right thing.

@austinwilhelm6611

3 жыл бұрын

Same im running into this issue with my 2013 avanger

@isaachale9588

2 жыл бұрын

How did you solve this?

@AllaLighting

2 жыл бұрын

This happens due to the led bulbs purchased draw less power than stock lamps, for your vehicle with CAN-Bus system, for your situation, we recommend to try the CANBUS LEDs bulbs or resistors, for CANBUS LED bulbs we recommend high beam allalighting.com/products/can-bus-9005-led-headlights-conversion-kit-bulbs-9011-hb3-white; Low Beam allalighting.com/products/can-bus-9006-led-headlights-conversion-kit-bulbs-hb4-xenon-white; resistor we recommend allalighting.com/products/9012-9006-9005-led-load-resistors-headlight-flicking-error-canceler

@AllaLighting

2 жыл бұрын

@@isaachale9588 This happens due to the led bulbs purchased draw less power than stock lamps, for your vehicle with CAN-Bus system, for your situation, we recommend to try the CANBUS LEDs bulbs or resistors, for CANBUS LED bulbs we recommend high beam allalighting.com/products/can-bus-9005-led-headlights-conversion-kit-bulbs-9011-hb3-white; Low Beam allalighting.com/products/can-bus-9006-led-headlights-conversion-kit-bulbs-hb4-xenon-white; resistor we recommend allalighting.com/products/9012-9006-9005-led-load-resistors-headlight-flicking-error-canceler

@crue3139

2 жыл бұрын

@@AllaLighting Thanks. Yea figured it out. We bought and installed resistors so they work perfectly now. They're actually brighter than mine some how

I switched to 9005 LED bulbs in my 2007 Silverado (1500 classic) and my high beams will only turn on when I pull the lever back (temporarily on) but they will not turn on when I push the lever forward (constant on). What can I do???

@AllaLighting

3 жыл бұрын

Thanks for your message. Silverado usually is LED friendly, do you have any other modification? do you see an error code on dash? Please advise for further assistance, thanks in advance.

@tedmccarthy9525

3 жыл бұрын

@@AllaLighting Thank you. I just replaced the stock radio (professional installation). No other modifications. There aren’t any error codes either.

@AllaLighting

3 жыл бұрын

@@tedmccarthy9525 The diagram indicates current runs through Headlamp Dimmer Switch before it reaches ground, we recommend you check: 1, Body Control Module(including the lever used to turn on and off high beam) and Headlamp Dimmer Switch(the Switch used to switch among AUTO, PARKING LIGHT ONLY, HEADLIGHT MANUAL), if both parts function properly with 9005 Halogen Bulb installed, then they are good. 2, We also head the issue that LED headlight bulbs only work when the Headlamp Switch is switched to HEADLIGHT MANUAL, if that's the case, a pair of load resistors are required to restore the circuit. files.slack.com/files-pri/T011WBH039T-F01L53YBT7W/2008-chevy-silverado-headlight-wiring-diagram-wiring-diagram-and-1.jpg

Its literally the reverse for led compatibility. My 06 cant run led bulbs. Any new car comes with led stock.

2016 Nissan Rogue any recommendations?.

@AllaLighting

3 жыл бұрын

Thanks for your message, would you please advise what type of bulbs you are looking for? like low beam? high beam? etc

@yoniaguilar7599

3 жыл бұрын

@@AllaLighting low beam

@AllaLighting

3 жыл бұрын

@@yoniaguilar7599 We recommend allalighting.com/products/h8-h9-h11-led-bulbs-replacement-upgrade-halogen-lamp as low beam LED to upgrade halogen H11

Resistor is your friend

Why do led lights burn up my computer in my 06 dodge ram mega?

@AllaLighting

2 жыл бұрын

Sorry, we feel a little confused about your question, do you meet any error code on the dashboard? or the Vehicle's computer system stop working? please contact us by email service@allalighting.com by providing order details, issue, and vehicle's Make, Year, Model, Application, we will be glad to further assist you.

I installed 2 LED light bulbs of 35watts each on my 2014 GMC SIERRA. The weird thing is the lights are on when the vehicle is not started and on the power ON mode; however, the lights will be off as soon as I ignite engine.. Does anyone know what problem it is?

@AllaLighting

3 жыл бұрын

Please advise what type of the LED lights you have installed? like front turn signal? brake light?etc.

@heyyikan9456

3 жыл бұрын

@@AllaLighting they were headlights

@AllaLighting

3 жыл бұрын

@@heyyikan9456 thanks, probably the resistors helps, yet we don't know which product you purchased, in fact, it is better to contact the seller of the LEDs to check whether it helps.