If you liked this video, share this video with your friends ❤ it will help the development of the channel! 📈 Thank you for your comment! 😍

Astrein, mit Dir kann man arbeiten. Danke für die detaillierte Anleitung 🙂

@NiceBikeService

2 күн бұрын

Ein neues Video zu diesem Thema wurde heute veröffentlicht

The closeup of the dirt coming out was a work of art well done 👍

@NiceBikeService

8 ай бұрын

thank you! I tried)

@pentiuman

2 ай бұрын

Brown-noser. Edit: On 2nd thought - it was beautiful! I apologize for my insensitive earlier comment.

Bro, you got my subscription right now, the close up, the details, the sound effects, the no-background-music, you got me yours. harrd core MTB, thank you.

Once the bearing races are worn and pitted, you can clean all day and it won't help. Those bottom brackets cost peanuts. Much better to replace it.

@NiceBikeService

23 күн бұрын

Thanks for the advice. it is often really easier and cheaper to replace the entire bottom bracket. We just showed the possibility of cleaning the bearings

Nice DiY example. Now I know what I have to aspect. Good bright video with close records, I love that. Most videos are dark and see no details. But here you made it perfekt with patience.

@NiceBikeService

3 ай бұрын

Thank you for your comment. We played with the lighting and installed a lot of lamps to make everything visible😸

@pentiuman

2 ай бұрын

You mispelled perfect. But that's OK - I mispelled mispelled.

You should remove the dust caps while the bb is still in the frame. No need for box cutters. Insert the end of the spindle and rotate in a big circle and the dust caps will pop straight out with no damage.

@NiceBikeService

5 ай бұрын

Thank you for your feedback! 😘

@mondone1906

12 күн бұрын

Could you please explain the benefit of removing the dust cups while bb is still in the frame?

@millsshumps1968

10 күн бұрын

@@mondone1906 easier to remove because of tight fit. once you remove the cups you can remove the bb and remove the rubber seals. the box cutter method is risky in cutting your thumbs.

Great video love the camera works and the included struggle noises. A++

@NiceBikeService

6 ай бұрын

Thank you for your feedback 😽

@pentiuman

2 ай бұрын

He had great microphone support.

I love how it says "DO NOT DISASSEMBLE" in big letters and you just keep going with the official shimano knifes and screwdriver equipment 😂

My labor rate is $100 an hour. These cost like $15-20 to replace. Not only is it not worth the time or trouble for the customer but it’s not worth it for the shop. Unless ceramic, sealed bearings get replaced.

GENIUS video and tutorial - BIG THANKS!!!

@NiceBikeService

13 күн бұрын

Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈

Bearings damaged by sand will not be repaired even by lubricating them.

@NiceBikeService

7 ай бұрын

Thanks for the advice 😺

ive been lookin for channel like yours, amazing video!

@NiceBikeService

6 ай бұрын

😘❤️

@pentiuman

2 ай бұрын

I bet you're related to this channel, huh? 3rd cousin, or grandmother? You are awful kind for having enemy in your handle.

They come sealed brand new for 16-18 euro’s The labour in servicing them exceeds replacing them. Apart from that Shimano states “do not disassemble”.

@cegalleta

21 күн бұрын

If you do it yourself the labor is $0, shimano advices not to disassemble it because if you're not careful you can damage the seals (and well, they benefit from you buying new BBs). In th end, why produce more waste when you can avoid it?

@andreas1416

5 күн бұрын

If your time is worthless, it's $0, yes. If there is actual wear on the balls or the cups, all cleaning will be futile.

Felicitaciones por el video y por el hecho de que no hayas necesitado usar palabras ni tu imagen. Es muy raro en estos días encontrar videos como este, con cero de egocentrismo. Otra cosa que se puede hacer es cambiar el rodamiento cuando ya las bolillas están muy gastadas o mal tratadas. Siempre me pregunté hasta qué punto este nuevo sistema de caja es mejor que el tradicional de eje cuadrado. Tengo la impresión que las cajas de la tecnología anterior duraban mucho más. Saludos.

@NiceBikeService

7 ай бұрын

Buenas tardes. Gracias por sus comentarios. Este tipo de carros, al igual que los carros de eje cuadrado, tienen un comportamiento diferente en funcionamiento. Algunas personas los tienen durante años, mientras que otras los cambian cada temporada. En el lado positivo, un sistema de este tipo pesa un poco menos y es más fácil de mantener para un taller.

A nice video, and a job well done. You have a very tidy workshop and cycle tools 👍 Au

@NiceBikeService

7 ай бұрын

Thank you! 😇

@pentiuman

2 ай бұрын

His ex-wife taught him those excellent cleaning skills! So you should thank her. Afterall, he lost the bike in the divorce to her - his greatest possession.

@robalexander7348

2 ай бұрын

OK i see @@pentiuman

Though I've already seen a similar comment, these BB's retail at 22€ in the shop where I work. The labour charge to perform such an overhaul would come out at more than that, plus the consumables. Then you have to factor in the likelihood that, by the time the customer brings it in, the bearing surfaces would be worn and pitted anyway, so the result would probably be marginal at best. When you were done, at the end of the video- you could hear that the surfaces were pitted and worn- I would have given a big thumbs down. That was certainly not something that we could warranty with any confidence. It's nice to recycle, but for a business this sort of repair is simply not economically viable. If a home mechanic wants to have a go at it, that is a different matter entirely. Same opinion exactly when you overhauled a 15€ VP sealed BB.

@stevengagnon4777

7 ай бұрын

That also depends whether an inexpensive spare part is available or not. I did this offen for a refurbished used bicycle for sale. If the bearing was smooth yet I would clean it and renew with plenty of good grease . That way the BB is going to last a lew more years.

@NiceBikeService

7 ай бұрын

Usually, such parts are completely replaced in the workshop. The video shows that inside the BB, the same possibility of such service

@NiceBikeService

7 ай бұрын

Thank you for your comment. In addition, we pollute the environment less this way

@vojvoda9060

Ай бұрын

​@NiceBikeServnice.💪ice

@user-ku4yk4ut4z

17 күн бұрын

@@NiceBikeService Not really when you consider all the cleaner you have to toss that is more pollutant than the set of NEW bearings would be buy the Enduro External BB Cup Bearing X-Drive tool BRT-001 not only will you save your self time which is money in this game but you will Gaurantee your customer a truly NEW feeling bb using the existing cups!!! Been doing swapping Shimano bearing for 20y of my 30+ as a bike mechanic!!

Hello fellow, I´ve done these repairs also , but not on work. I´m an senoir mechanic with 27 years of dirty hands - and I solemnly swear that I will be fired from my work as the chief mechanic - doing all the stuff the other people in the shop will not !! Working and earning money in Germany are more seperated than ever in the last 30 years . Don´t believe the hype and ride your own repaired gear. This is the most effective way to learn. Why this seems to be from baltic area, I´m born hungarian from transsylvania. I´ve learned precise and accurate working skills from my father, who was a master tailor. That´s my 2 cent . Thanks

@NiceBikeService

4 ай бұрын

Thank you for your story. Nowadays, such repairs need to be done for fun, since in a commercial workshop it is simply not profitable in terms of labor costs and it is easier to replace🐱

@pentiuman

2 ай бұрын

He gave you at least a 3-cent remark. Send him a pastry.

Great video! Thanks!

@NiceBikeService

7 ай бұрын

💁😘

Szacun, że masz jeszcze całe palce z tymi "tapeciakami" na patencie 😂 filmik spoko👊

@NiceBikeService

7 ай бұрын

😂😂

Hola, una pregunta: el lubricante verde lo compras con la jeringa preparada o tú rellenas la jeringa, donde se consigue ese lubricante verde?...👋🚴🇲🇽

@NiceBikeService

8 ай бұрын

Compro un tubo grande y luego relleno las jeringuillas.

Que productos usa, tanto para limpiar y luego engrasar o lubricar? Se puede usar algún volvente? Para quitar grasa

Stilig video og guide! 😄

@NiceBikeService

13 күн бұрын

Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈

Great vid, so clear! Cld you do one for Sram DUB? We wld love to know how to expose the internal ball bearings for maintence 🙏

@NiceBikeService

Ай бұрын

Good afternoon. If you bring it to our workshop, we will make a video

Ótimo serviço! Deixou a peça nova! Embora o fabricante não recomende, é possível substituir os rolamentos. O kit de ferramentas especiais para esse serviço, bem como os rolamentos, é bem barato (da China). Grande abraço!

@NiceBikeService

2 ай бұрын

Obrigado pelo teu comentário! 😍 se gostaste deste vídeo, partilhe este vídeo com os seus amigos ❤️ isso ajudará no desenvolvimento do canal! 📈

muitos detalhes e completa sua vídeo aula , obrigado e parabens

@NiceBikeService

7 ай бұрын

Obrigado pelos vossos comentários 😽

@pentiuman

2 ай бұрын

No hablo de Inglish?

Gostei do modelo de vídeo, sem enrolação!

@NiceBikeService

3 ай бұрын

Obrigado pelo vosso feedback! 😘

i think once you remove the cover, once the succeeding procedure will be easy right?

Also ich würde diesen Aufwand nicht in Betracht ziehen, denn die Hollowtech-Tretlager sind vom Preis her relativ günstig. Zudem kommt noch , dass der Verschleiß bei den Lagerschalen bzw. Kugellagern mit keiner Waschaktion beseitigt werden kann. letztendlich läuft es auf einen Tretlager Austausch hinaus. In der Regel halten diese Tretlager mehrere 1000 Km, selbst bei höheren Belastungen durch Gepäcktaschen oder Fahrrad-Anhänger.

@nataliakaleev7953

3 ай бұрын

sehe ich genau so

@NiceBikeService

3 ай бұрын

Danke für den Rat! 😘

Good job..

@NiceBikeService

5 ай бұрын

Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘

which solvents do you use to clean ? what type of Grease ? thanks for the video.

@NiceBikeService

6 ай бұрын

Gasoline cleaner and Shimano grease Share my videos with your friends, it will help the development of the channel! 😘

Para desmontar el anillo protector, es muchísimo más práctico hacerlo con la punta del mismo eje del pedalier y así también no corremos el riesgo de romper el anillo.

@ivanleyong4025

Ай бұрын

Haz un video si? Pienso que el eje de cuadrillo es mejor, rueda mejor, 2 años saliendo a no mas poder y estos de ejes huecos mantenimientos constantes que aburrido

Respectable work. Is someone willing to pay for the work when a new Bearing set costs around 20 euros? You make good videos thank you!

@NiceBikeService

2 ай бұрын

Thank you for your comment. This is the kind of work you can do on your bike when you have the time and inspiration 👍😸

I’m sure the cost of servicing bb is same as u purchase a new one 😅

@NiceBikeService

7 ай бұрын

Maybe😺

@emausderratsuchende5447

7 ай бұрын

Have you ever heard of sustainability????

@NiceBikeService

5 ай бұрын

Yeah, I'm working on it! It's gonna be great soon!

We usually use mineral oil and degreaser. Less than a couple of bucks to save having to buy a new BB at about 50 bucks.

@NiceBikeService

7 ай бұрын

👍

Hola, con la biela del eje del pedalier sacas la tapa sin problemas, ni dañarla y sin usar cutters, saludos.

@NiceBikeService

8 ай бұрын

¿Cómo?

@yoo324

8 ай бұрын

@@NiceBikeService con la barra del eje del pedalier haciendo un poco de palanca, así la saqué yo sin problema la tapa negra del rodamiento

@NiceBikeService

8 ай бұрын

Gracias por el consejo, ¡¡¡lo probaré algún día!!!

Very informative. But without words or text makes it difficult for people to know. What you are using

@NiceBikeService

7 ай бұрын

Thank you for your feedback. We shoot without words so that a person from any country can understand everything🚲

Awesome job on the sound and editing.....thanks

@NiceBikeService

7 ай бұрын

😽

@pentiuman

2 ай бұрын

Please limit your comments like this. Otherwise, he will make even more videos on bike maintenance. Do you want that? I didn't think so.

Hola amigo,un consejo,cuando saques el protector plástico,no utilices el cutting por el lado del filo,dices que tener cuidado de no dañarlo y eso que hiciste está muy mal,saludos parcero

@NiceBikeService

2 ай бұрын

Gracias por su atención, teníamos un poco de prisa al grabar🐱

Si metes el mismo eje de 24mm dentro de la tapa de plastico 5mm adentro y lo palanqueas leve ,sale sin problemas esa tapa cubrepolvo sin usar destornilladores ni cuters peligrocisimos

@NiceBikeService

7 ай бұрын

Gracias por sus consejos😽

A manutenção é mais cara que uma peça nova. E depois que abre, nunca mais veda igual.

@NiceBikeService

6 ай бұрын

Esta é uma boa opção para uma oficina doméstica 😺

To jest pudrowanie trupa. Więcej stracisz niż tym zyskasz. Zmarnujesz kupę czasu na wyjęcie, rozebranie, wyczyszczenie, poskładanie i zamontowanie. I dalej masz te same stare łożyska (a nie wyjmując ich z bieżni nie wyczyścisz ich porządnie). Nowe łożyska do suportów shimano są ciężko dostępne, ale masz przynajmniej nowe łożyska. Ale ich poprawna wymiana bez odpowiedniego sprzętu łatwa nie jest jest. Nowy chiński suport hollowtech (ze standardowymi wymiennymi i tańszymi w zakupie łożyskami) wychodzi 40/50 zł, a taki "reanimowany" suport wytrzyma góra kilkaset km. Więc szkoda czasu na taką amatorkę. No ale ktoś powie... nie mam kasy. Ja powiem to sobie odpuść zamiast robić fuszerkę. Takie rzeczy to się robiło w łożyskach w deskorolkach jak miałem 10 lat i nie miałem kasy, ale nie w 2023 roku w pojeździe który robi setki jak nie tysiące km. Pobawić się można jasne, ale to nie jest żaden "serwis". I nie chodzi o to że Cię krytykuje personalnie. Po prostu mam doświadczenie i wiem że lepiej coś zrobić raz a dobrze. Bo potem jest wysyp tak serwisowanych rowerów, których nikt nie kupuje, a niby są w "dobrym stanie". Chciałbyś kupić samochód serwisowany takimi sposobami, który rozwali się na końcu Polski? No... także głowy na karku życzę. Pozdrawiam.

@NiceBikeService

6 ай бұрын

Dziękujemy za szczegółową opinię. Rzeczywiście, w większości przypadków łatwiej jest wymienić cały suport lub znajdujące się w nim łożyska. Procedura pokazana na filmie jest zalecana do wykonania w domowym warsztacie jako tymczasowa naprawa lub na przykład po zalaniu suportu w celach profilaktycznych

yo tengo un sonido al pedalear con fuerza, pero solo cuando estoy sentado, podra ser el hollowtech?

@NiceBikeService

3 ай бұрын

Curiosamente, podría ser la tija del sillín o el cuadro de una bicicleta. Inspecciona con cuidado el lugar donde la tija entra en el cuadro, puede haber microfisuras que hacen el sonido

Great example of how to not to do. Using stanley knifes way you did is such a bad idea.

@NiceBikeService

7 ай бұрын

Thank you for your feedback

@TheSqueak99

3 ай бұрын

Do it whatever way works for you. Great video

@vojvoda9060

Ай бұрын

No,that is ok.

@floatingrabbit3556

19 күн бұрын

If you could show us it how it should be done, that would be great, rather than mouthing off.

@miepmaster25

Күн бұрын

It says "do not disassemble" for a reason... Just replace it, it's worth it.

What brand of grease did you use for the bearing?

@NiceBikeService

3 ай бұрын

We use thick calcium grease Divinol

Sir can you put a name of what solution did you apply. So we can learn what you did in the video. Thanks

@NiceBikeService

3 ай бұрын

Thank you for your comment. If you turn on subtitles, you will see a description of some of the actions and tools

Nie mogę zgodzić się ze stwierdzeniem, że suport odpowiada ze powolność roweru a pokazane prace przyspiesza rower. Wg mojej oceny pokazany suport nie generuje jakiś nadmiernych oporów; jeśli dodać, że suport jest w centrum osi obrotu korb to jego opory (tego suportu) są pomijalne. Dodatkowo od kilku lat zauważam tendencje do smarowania wszystkiego w rowerze co kiedyś smarowaniu nie podlegało a przynajmniej odbywało się choć rozsądnie. Dla przykładu proponuję aby kupić łożysko wielkości pokazanego w filmie. Pokręcić nim, następnie dokonać tych samych czynności co w filmie i ponownie pokręcić. Opór będzie wyczuwalnie większy bo fabrycznie w łożysku nie ma takich ilości smaru jak ogłada się w wielu filmach instruktarzowych. Układ jest prosty. Suche łożysko kręci się długo i bez większych oporów. To co stawia opór to uszczelnienie łożyska i smar. Jeśli rzucić kulkę na stole potoczy się, Jeśli posmarować stół smarem zatrzyma się. Jeśli smaru będzie bardzo dużo wpadnie tam gdzie rzucę. Uszczelnienie łożyska - dobre, jak najbardziej będzie generować opór - dobrze przylegające wargi to czystość i trwałość. Smar wyliczana jest przez fabrykę i dobierana w oparciu o kilka czynników. A na koniec dodam - każdy widział zniszczone bieżnie shimano. Nawet wysokich klas piast. Ale łożyska toczne wystarczy umyć i złożyć. Jakby jego bieżnie były nieśmiertelne i wieczne. Są już nawet filmy gdzie puryści rozbierają kółka przerzutki shimano ceramiaczne i tam nakładają smar jakby zapominając, że cena tych kółek wynika z faktu bardzo małych oporów ślizgu - użytych materiałów, które nie wymagają smaru, Uważam też, że twierdzenie "każdy szanujący się rowerzysta od czasu do czasu zadaje sobie to samo pytanie: "Dlaczego mój rower jest tak trudny w prowadzeniu?" to nieprawda. Nie zadaję sobie takich pytań co nie czyni mnie zupełnie nikim. Zresztą stwierdzenia moją to do siebie ze to forma zamknięta. NIe ma nic - tak jest jak jest stwierdzone. Otwartość na świat objawia się pytaniami. To szeroka i ciekawa perspektywa.

@NiceBikeService

2 күн бұрын

Dziękuję za tak obszerny komentarz. Nie zapominaj, że pod obciążeniem tarcie w łożysku znacznie wzrasta, dlatego konieczne jest smarowanie. To nie to samo, co obracanie łożyska w powietrzu.

Se coloca la grasa solo de un lado del rodamiento? No deberia ser de ambos?

@NiceBikeService

3 ай бұрын

En el vídeo, el rodamiento no está desmontado, así que lo engrasamos por un lado, la grasa penetrará en el interior, esto es suficiente. Si tienes un rodamiento separado y lo vas a introducir a presión, puedes engrasarlo por ambos lados con una capa más fina

2:43 - 4:45 , tire levers for bearing shield seal covers! ✊️🥇👍😉

@NiceBikeService

8 ай бұрын

💁😘

Qué es lo que tienes metido en la jeringuilla para limpiar el rodamiento por dentro

@NiceBikeService

7 ай бұрын

isopropanol

Its always hard, never easier ;) you just go faster

@NiceBikeService

7 ай бұрын

😺

What solvent do you use?

@NiceBikeService

6 ай бұрын

refined gasoline ) Share this video with your friends, it will help the development of the channel! 📈😘

Mejor cambiar los rodamientos o incluso el motor ya que no son costosos, hasta de cerámica los hay y giran mucho más suave

@NiceBikeService

3 ай бұрын

Gracias por su comentario.😘

Na verdade, observando bem de perto, as peças de bike vão modernizando, porém o princípio é o mesmo, como no caso do movimento central modelo hollowtech que possui apenas um par de rolamentos igual a outro movimento central convencional 🫤🫤 custando um absurdo.

Does anyone know where to find new plastic cups if the old ones brake?

@NiceBikeService

2 ай бұрын

Unfortunately, we do not know

What liquids are you using to wash them?

@B_COOPER

8 ай бұрын

If I had to guess, wd-40 or another kind of penetrating oil. Gotta be wary of what you use though, some chemicals can turn a component into a time ticking bomb

@NiceBikeService

8 ай бұрын

car engine cleaner, and gasoline.

@Jetsettar

8 ай бұрын

use gloves when working with solvents, bro@@NiceBikeService

@renetorrefiel5932

7 ай бұрын

Alluminium cleaner

4:05 Do not disassemble , challenge accepted 😈

@NiceBikeService

7 ай бұрын

😉

I have worn through two of these now, my bike is 10 years old now and the first one held for much longer than the second one. Might have gotten worse quality there or have abused it more idk.

@NiceBikeService

Ай бұрын

10 years ago, the quality of the components was higher, it's a wonder 😉.

What kind of liquid are you using? For each of the step?

@NiceBikeService

2 ай бұрын

For heavy dirt, we use refined petrol (something like camping fuel), and for final degreasing, we use isopropanol in a spray bottle. For lubrication, we use thick calcium grease divinol, but any other similar grease is fine.

what grease is the green grease being used?

@NiceBikeService

2 ай бұрын

For lube, we use thick calcium grease Divinol

good

@NiceBikeService

7 ай бұрын

💁😘

Minuto 3:33 esa tapa sale super fácil con el eje de las bielas solo es insertar aproximadamente un centímetro y hacer palanca y ha

@NiceBikeService

Ай бұрын

Gracias por sus consejos😺

vyplatí se tento servis když nový střed stojí 300-400kč?

@NiceBikeService

8 ай бұрын

Myslím, že to za to nestojí. 10-15 dolarů za práci.

@emausderratsuchende5447

7 ай бұрын

Have you ever heard of sustainability...?

Ignores the "Do Not Disassemble" label. Slices thumb off. Has self to blame, nobody to sue. Cries and learns to ride w/ 4 fingers. So sad. Edit: No longer rides in creeks, reducing sand in clean BB, saving next BB maintenance for 2-3 weeks. Partial win. Saves at least $19 by not having to buy a new BB off Amazon - leaving billionaire owner looking for another customer to replace a non-repeat Buyer. Memo to BB manufacturer: Make BB Warning Sticker in CAPITOL Red letters to prevent others from following this guys method.

@NiceBikeService

2 ай бұрын

interesting comment 👍

What chemical or liquid did you use on 6:16?

@NiceBikeService

7 ай бұрын

In our country, it is called "Kalosha", a variant of refined gasoline. Wikipedia says that there is an analog of "Coleman fuel"

What is this cleaning solution?

@NiceBikeService

6 ай бұрын

This is a variant of refined gasoline, we call it "kalosha", so I understand that the analog is camping gasoline or coleman fuel

Just use next time a metal ruler with round backend to remove washers.. its way more easy than knifes 😮

@NiceBikeService

7 ай бұрын

Thank you for your advice. I didn't have one to pick up😉

witam, co to za smar ten żółty w strzykawce ?? jeśli kulki i bieżnia łożyska na to pozwala można próbować reanimować - w przeciwnym wypadku lepiej chyba kupić nowy support. Fajnie się ogląd z bliska - widać każdy szczegół ;)

@NiceBikeService

Ай бұрын

Do smarowania używamy gęstego smaru wapniowego Divinol Prawdą jest, że w większości przypadków łatwiej jest wymienić całe dolne ramię, ale nie jest to zbyt przyjazne dla środowiska😉

Najłatwiej wyciągać ten plastik ochronny z suportu końcówka korby bo nie ma ryzyka jego ulamania jak przy metodzie z nożykiem.

@NiceBikeService

8 ай бұрын

Spróbuję następnym razem. Dzięki!

What lubricant it was?

@NiceBikeService

5 күн бұрын

For lube, we use thick calcium grease Divinol

It's worth doing only if the ball bearings and races are not damaged. If so it will still feel rough after and you just wasted one hour of your time

@NiceBikeService

2 ай бұрын

thank you for your comment! 😘

thanks i was worried 😁😁😁😁😁 i thouts its only plastic no beerings😊😊😊😊😆im safe now

Weird, my UN72's and Race Face Taperlocks are still going strong after years and years.

@NiceBikeService

6 ай бұрын

Bottom brackets are like a lottery - you can drive for several years without doing anything, or you can repair and replace them a couple of times a season

I have taught more than one to ride a bicycle and I have been riding a bike since I was 5 years old and no one taught me, I have to learn the hard way, that is, the beatings 😂😂😂😂😂😂😂😂😂😂😂

@NiceBikeService

7 ай бұрын

Thank you for the story🐱

Safety first

@NiceBikeService

7 ай бұрын

😽

シマノのBBって再利用不可のワンウェイ品ではなかったかしら？←オール金属のTOKENにすぐ変えました。

@NiceBikeService

20 күн бұрын

Token はめったに見かけない。多くの場合、自転車にはシマノや中国の有名ブランドが装備されている。

Hollowtech was a mistake© (Miyadzaki)

@NiceBikeService

8 ай бұрын

perhaps)

@cagr4249

7 ай бұрын

I think the design is good. But the implementation was and is lousy.

@emausderratsuchende5447

7 ай бұрын

Nonsense... the system always worked perfectly for me, even in the toughest conditions.

@___Bebo___

10 сағат бұрын

Hollowtech is stupid. Lets hold the NDS side crank arm on with 2 tiny pinch bolts with 15Nm of Force, lets have our bearings wear out in 1 year instead of 10 like Square Taper, utter trash.

良い動画、シマノさん的には交換ってことなんだろうけど、こうすればずっと使えるよね 特に日本だとカンパのは入手が大変だからこうして使わないとな、小難しいことしてるが パーツクリーナーでぶしゅーーーが楽でいいんじゃねーかな、まあ動画のみばえとかエコ的なあれか？

@NiceBikeService

7 ай бұрын

ご意見ありがとうございます。シートの状態が悪くなるまでは、ベアリングそのものを交換することはできます。本当はその方が環境に優しいのですが、時間がかかります。

Great video - no verbals. Too many KZreadrs like the sound of their own voice. Succinct

@NiceBikeService

4 ай бұрын

Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘

Perso j'ai fait monter des roulements céramique speech et vu le prix vous pouvez me croire je les entretiens régulièrement

@NiceBikeService

Ай бұрын

Je vous remercie pour votre commentaire. Je vais tenter l'expérience

Boss Keng sama sa ride nyo pro bike mechanic Ako hehe 👌

@NiceBikeService

2 ай бұрын

😸👍

And if that was water he rinsed the bearings off with, not a good idea if you don't have an air compressor to blow the water out.

@NiceBikeService

Ай бұрын

There is a compressor, we did not wash it with water, but with a solvent😺

you did not remove the bearings from the housing.. rust could develop between the outer race and the housing.

@NiceBikeService

3 ай бұрын

thanks for the advice ! 😘

@zodiark2456

26 күн бұрын

that wasnt water

Wszystko przedłużone bez potrzebny. Można to zrobić w dwa razy mniejszej liczbie operacji i bez straty czasu.

@NiceBikeService

7 ай бұрын

Dziękujemy za opinię🐱

@Giuliano-be1be

7 ай бұрын

Su Amazon perdi ancora meno tempo

Bottom brackets are cheap, I just replace mine😄👌🏼

@NiceBikeService

7 ай бұрын

👌🏼

@emausderratsuchende5447

7 ай бұрын

Have you ever heard of sustainability...?

@DarkstarDarth

7 ай бұрын

@@emausderratsuchende5447 ....I sustain my 2 homes, 3 cars and 2 bikes so I guess I kinda know what that is.

거의… 환자수준 ㅎㄷㄷ😂😂😂

@NiceBikeService

25 күн бұрын

😸

Belle vidéo mais les roulements peuvent même être changé

@NiceBikeService

6 ай бұрын

Nous vous remercions pour vos commentaires. Nous le changerons lors de la prochaine réparation😺. N'hésitez pas à partager mes vidéos avec vos amis, cela aidera au développement de la chaîne !

@ticetice2998

6 ай бұрын

@@NiceBikeService je parlais de pouvoir extraire les roulements de ses logements

@NiceBikeService

6 ай бұрын

ce sera une vidéo différente.

I'm surprised you clean people usually just throw these away and upgrade

@NiceBikeService

13 күн бұрын

Thank you for your feedback! 😘

BB에 써있는데 열지 말라고. 한번 열었다가 BB 를 바꿨슴. 소음 원인은 체인 기름칠 안한 것. 가급적 BB는 손대지 말기를..

Hay

@NiceBikeService

Ай бұрын

😽❤️❤️

Klinkt toch wel redelijk droog als het klaar is 👀👀

@NiceBikeService

7 ай бұрын

shhh 😇

bez słów to ciężko, bo każdy przeźroczysty płyn to woda... A zielony smar to dżem jabłkowy... Po takim serwisie to tylko na złom.

@NiceBikeService

8 ай бұрын

Muszę kiedyś wypróbować dżem jabłkowy zamiast tłuszczu )))))

I'll pay the $20 for a new BB.😊

@NiceBikeService

6 ай бұрын

😉

4:04 LMAO

@NiceBikeService

8 ай бұрын

)) I've been huffing and puffing over this lid for a long time. it didn't go according to plan.)

😂❤❤

@NiceBikeService

4 ай бұрын

Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘

LIMPOU PRA SUJAR PRA LIMPAR NOVAMENTE.... NÃO SERIA MELHOR TER DESMONTANDO COMPLETAMENTE, TER RETIRADO OS RETENTORES... MAIS ENFIM

@NiceBikeService

2 ай бұрын

É a vida de um ciclista, sujar-se, partir-se, depois lavar-se e reparar-se😹

Los dura ace no se pueden abrir

@NiceBikeService

5 ай бұрын

😿

At the moment this 20-30$ BB's don't work anymore better buy a new one ...

@NiceBikeService

6 ай бұрын

You can change it, but it's not that interesting 😺

@mortlow6688

6 ай бұрын

@@NiceBikeService 😂👍

@NiceBikeService

5 ай бұрын

😉

While it is interesting to see that is a total waist of time...Buy an Enduro External BB Cup Bearing X-Drive tool BRT-001 BB bearing remover (not cheap but worth it) and a Enduro Bearing kit and be riding in less than 20min on a NEW set of Better bearings !!!

@NiceBikeService

13 күн бұрын

thanks for the advice ! 😘

Sofrência pra tirar uma tampinha do hollowtech

@NiceBikeService

7 ай бұрын

É isso mesmo😽