Back in the early 60's my brother and I received a Mattel Vacuum Form for Christmas. It worked the same way but was limited in size to only about 4 inches square. We made hundreds of copies of toy soldiers with our "Vacuum Form". Latter in life I went looking for that machine in the basement of my parents house, I found it sitting on a shelf, and to my surprise it still worked. I used it to make clear canopies for balsa wood R/C airplanes. Loved that machine!

@ChadsCustomCreations

Жыл бұрын

That is too cool I love the fact that it still works today. Did it have an integrated vacuum also?

@josephgregory5567

Жыл бұрын

@@ChadsCustomCreations Yes it did have an integrated vacuum. You would place the plastic sheet which had perforations around the perimeter into a frame that was hinged on one side. The Frame with the plastic installed would be suspended above a "Hot Plate" to heat up the plastic. Once the plastic began to droop from the heating process, you would take the frame, which as I mentioned was hinged on one side, and flip it over onto your item you were making a mold of. Immediately you would begin to press repeatedly a lever which was a manual vacuum pump to evacuate the air causing the plastic to conform to the mold. In my case a toy soldier or mold of a R/C canopy. Not to many toys that you received as a kid you still find uses for as an adult. Thanks again for the Great Video!

@ChadsCustomCreations

Жыл бұрын

@@josephgregory5567 that’s incredible I’ve gotta search eBay and see if I can find one for my kids!

@josephgregory5567

Жыл бұрын

@@ChadsCustomCreations Just for fun I went looking to see if anyone had made a video of the Mattel Vacuum Form and came across this short video. Enjoy: kzread.info/dash/bejne/aXWEmrSGhL2opJc.html

@ChadsCustomCreations

Жыл бұрын

@@josephgregory5567 oh wow what a great design for that machine! Thank you for sharing that.

I can see this machine can be used in order to create models in order to restore car batches, logos, stop or other fender lights for classic cars because some cars are now impossible or difficult to find spares, very nice video Chad! I'll consider this in order to create stuff inside my garage ;)

Thank you for sharing examples of things that you and others are doing with this sort of machine. It’s very inspiring!

@ChadsCustomCreations

6 ай бұрын

Thank you for watching I am still incredibly new to vacuum forming and look forward to learning and seeing more of how people are using them.

Can i just say how incredible it is that a LOT of these manufacturing machines used and new are making there way into OUR hands and not just corporations at reasonable prices. Letting us start our on side hustles and create passion projects?

@ChadsCustomCreations

4 ай бұрын

I second all of that! It’s a great time to be alive.

Great review. I built a vacuum forming box a couple years ago. It's 22"x 17", the frame that holds the plastic sheet (fits exactly in an oven) is the same dimensions. I use it to make car headlamp lenses, love the results.

@ChadsCustomCreations

Жыл бұрын

Oh that’s awesome so cool to hear all the different applications

Ok now I want a 3d printer and a Vacuum Former - the possibilities are almost endless, never be bored

@ChadsCustomCreations

Жыл бұрын

Haha sorry but your exactly right. 3D printer and vacuum former is a match made in heaven.

Mattel Vac-u-form Maker Sets were the thing when I was a kid. This brings back that period Thank You for the video.

@ChadsCustomCreations

Жыл бұрын

We didn’t have cool toys like that in the 90s

I like your curiosity! Cool how you just try out new things and instantly gain new ideas.

@ChadsCustomCreations

Жыл бұрын

Thank you David, I am glad that came across in the video, I really do love learning new skills like this especially when I get to ad it to my maker’s tool belt of tools.

Nice video Chad! Again, you are clear, concise and focused. Great demonstrations of the product and different types of projects (the Atari sign is very cool!). So many possibilities with this type of machine, esp if one has a 3D printer (your use of the laser is a great example also, can see how a cnc router would also be very useful to make forms). Great job! Thanks for taking the time to share this with us! (also, please give up on your dream of being a picture hanger.. 😉😁)

@ChadsCustomCreations

Жыл бұрын

David thank you so much for the encouragement. Yes I really love how well all the digital fab machines compliment the vacuum forming process. For real that poor sign couldn’t hang for more than 20 seconds lol

The cup lids are done in a steady sheet of plastic that has rows of the Lids formed into it in an oven area, then fed into a huge die cutter that's basically a punch press with a cycle that feeds the sheet through it . The oven forms like, 6 wide, by around 20 deep, each time it forms a set, on a continuously fed sheet. The cool thing is that there is like NO scrap...anything that's deformed is ground down and placed back at the front of all the machines where its melted back down and sent right back through...pretty cool process!

@ChadsCustomCreations

Жыл бұрын

Super cool, the development of factory machines is so fascinating to me. I used to love watching that tv show how it’s made!

@classicmetaldude

Жыл бұрын

@@ChadsCustomCreations Me too!

@rcdogmanduh4440

3 ай бұрын

Sweetheart Plastic's Wilmington Ma.

So pleasant to find you! Great info tech.

@ChadsCustomCreations

7 ай бұрын

Glad you made it here! Hope you stick around.

Thank you so much for sharing this video, I've been searching for a better packaging solution for a long time now.

@ChadsCustomCreations

5 ай бұрын

Happy to hear that!

I made my own vacuum forming machine after reading a tutorial I purchased from an Etsy shop in the beginning of 2013 about how to vacuum form. I had found various handmade vacuum box models available at that time, starting around $100, but that was not in my budget, as a single mom. So I figured out a way to make my own. It ended up costing roughly a fourth of that. I opened my Etsy shop in 2014 and I have been selling molds ever since. I use 1/16 thick ldpe, but I have been wanting to use other materials. The plastic you're using looks like it will be perfect for what I want to make, but I have never worked with it, so it will definitely be a new learning experience for me. I will need to figure out the correct temperature to heat it, what it will look like when it is ready, and all the steps required to get it to mold correctly. I am trying My best to avoid watermarks. My setup is a large toaster oven, an aluminum frame I made from a window screen frame which I put the plastic inside and clamp to hold it while it heats up, and a vacuum hooked up to my handmade box. I also make handmade cards, so I would like to make domed shapes to create kind of a snowglobe card with a plastic window with confetti and other little things inside. They sell these plastic domes in different places and different shapes and sizes, but since I already have the machine and understanding and skills for the most part of vacuum forming, it would actually be a lit cheaper to buy the materials and make them myself. I'm considering letting my shop go. It's a lot of work, and I'm not the kind of person who thrives on that. Most of the molds I sell are used with epoxy, or other types of resin, to make jewelry and other things. Also, those wrinkles are called webbing, if I remember correctly. Thank you for sharing! It's been really helpful for me 💖

@ChadsCustomCreations

Жыл бұрын

That’s such a cool journey! Thank you for sharing this!

@balover2010

Жыл бұрын

Holy cow, now I want to make my own! I just looked at prices online and they're way out of my budget. I appreciate you sharing this idea, I'm off to figure out how to make one!

@ChadsCustomCreations

Жыл бұрын

@@balover2010 definitely go check out punished props and iliketomakestuff i believe they both have tutorials on DIY machines.

@bossdog1480

9 ай бұрын

Well done. 😁😁

@Tewhi69

3 ай бұрын

What is the name of your shop?

Lasering lends itself really well to vac forming because your cuts kinda have a draft angle built in, even if it's a really shallow angle from the shape of the laser kerf. Amazing work!

@ChadsCustomCreations

Жыл бұрын

Oh yes you are totally right! I bet I could increase that angle with a shorter focal length lens also. Great point thanks for adding that to the comments.

@CSmr-cc7ge

Жыл бұрын

In Mould building with solids, 8% angles are the minimum, but since this seems a little flexible a smaller angle might be fine

I love how excited you were when things came out. It was hilarious. I can definitely see the value of one of those though.

@ChadsCustomCreations

Жыл бұрын

Like a child learning to ride a bike every win came with a reason to celebrate 😂

Fantastic video! I was just looking at getting my vacuum firmer up and running! Lots to learn

@ChadsCustomCreations

Жыл бұрын

Thanks so much, big fan of your channel and what you’re doing over there. Can’t wait to see what you can do with yours.

@ackackBarf

Жыл бұрын

Take a look at the Sabula Tech channel, has good range of related videos. Probably better than most any other source. Mainly focused on making rc bodies but the concepts are the same for about everything.

Chad! I just stumbled across this video just now. It is spectacular. It was awesome to see you thinking through the business and process generation implications of acquiring this new "Toy". Very inspiring for the average hobbyist to find a way to turn passion into a small business!

@ChadsCustomCreations

Жыл бұрын

Glad you enjoyed it!

Best thing for a small business owner. May God keep blessing you man can't wait to get there. 🙌🏼

@ChadsCustomCreations

Жыл бұрын

Thank you! Praying the same for you!

I 3d printed my own vacuum form! It's a lot of fun and I enjoyed your video!

@ChadsCustomCreations

Жыл бұрын

That’s a perfect pairing! Thank you for watching.

The sign could have had LED lights placed behind it to light up the letter. Use lighter coats of red to build until it's just barely covered and the lights will make them glow. Great video. On the 3" box, what about increasing the heat a little to allow the mold to completely form on the corners?

@ChadsCustomCreations

Жыл бұрын

Great idea and yes more heat does allow for more detail but also if you go too far like I did that first time with the knives it will create random folds also.

@dwintster

Жыл бұрын

@Chads Custom Creations drill holes in the corners helps. I'm genuinely impressed. Holes, 3 degree draft angles and radius on parts are your friends when designing for vacuuming forming.

@ChadsCustomCreations

Жыл бұрын

@@dwintster awesome thank you for the tips.

@dwintster

Жыл бұрын

@@ChadsCustomCreations you’re welcome, thank you for the inspiration. Time to put my industrial design education to use on small production runs for my own business.

Just ran across your video and so glad I did very informative and interesting thank you for sharing. I would love to see how well these would work with resin/clay, silicone etc. I've been looking for cheaper alternatives to make more of my own custom design molds for my business. Looking forward to an update on your progress.😊 I'm also curious to know if you're able to reheat and vacuum the plastic again and how many items you can fit on one sheet. Granted I know that number would vary based on the side of the objects being vacuumed.

@ChadsCustomCreations

2 ай бұрын

Thank you for watching I would be curious to see all that also!

Love the posibilities with this. Can you imagine special molds for chocolate for cake decorators etc. I love it.

@ChadsCustomCreations

Жыл бұрын

Yes it opens up so many doors to creativity.

They ate super easy to build. In a setup like that you need the heaters built in the top soon as it sags pull it down. Others I know heat the sheets in an oven which adds some complexity moving it to a vacuum table. If you don’t care about the fancy enclosure really very easy to build.

Love the enthusiasm and possibilities of this for a small business. Only thing I’d say is to see if there’s a compatible bioplastic available or one that’s specifically compostable/recyclable/already post-consumer plastic based. If not, I would limit this to products that require or are greatly enhanced by it rather than just packaging anything or everything in plastic. Not trying to be a buzzkill, it’s a very cool machine, just important to remember many plastics are practically immortal and usually single use. Either way, enjoy and keep making cool stuff 🙏

@ChadsCustomCreations

Жыл бұрын

Thank you for the kind words. I definitely relate to what you are saying. Thankfully this plastic is recyclable I meant to mention that detail in the video but it didn’t make the cut.

Have you discussed how your business took off? That would be interesting.

@ChadsCustomCreations

Жыл бұрын

That’s a great idea David, I would definitely love to share that if there were interest in it.

@DavidSullivan69

Жыл бұрын

@@ChadsCustomCreations There is a lot of interest. I've watched many popular videos about it. I've had a local woodworking business for years and am looking to go more online, so I'm a sponge right now.

@SuperSeaguard

Жыл бұрын

@@ChadsCustomCreations I am interested

@joshuawray7968

Жыл бұрын

Definitely interested

@aadilkader

Жыл бұрын

Interested

Great review. Thanks for the mention. I'm still using mine to create custom RC bodies and products.

@ChadsCustomCreations

Жыл бұрын

Thank you Tony. Your review is great also glad to hear you are still liking your machine also.

You had my curiosity, now you have my attention.

(UPDATE 1-16-23) units are back in stock and available limited quantity Amazon Links (US residents only) Machine I am using - amzn.to/3GF2XlJ 46 Sheets - amzn.to/3i7Xmdl 73 Sheets - amzn.to/3tUcAFu Smaller Machine - amzn.to/3i7vzcO 50 Sheets - amzn.to/3V2dSdg 77 Sheets - amzn.to/3U1v7dJ Information and the placing orders for non US customers www.vacucu3d.com Or email ray@vacucu3d.com

@polakis1975

Жыл бұрын

Products in links you posted are unavailable

@ChadsCustomCreations

Жыл бұрын

@@polakis1975 which country are you in they might only be available in certain countries. If you’re really interested I can get you in contact with the owners and see if they would be able to get you a machine.

@ChadsCustomCreations

Жыл бұрын

Owner of company said 2.5mm

@kafilkavich707

Жыл бұрын

@@ChadsCustomCreations I'm in the united states and it's still showing unavailable and they don't know when it will be back in stock! I am really considering getting this machine as I have some great ideas on stuff I want to make!

@ChadsCustomCreations

Жыл бұрын

@@kafilkavich707 let me reach out to the owner and find out when more will be available

Try doubling up on your wood stencil, then temporarily sticking them together making sure you line everything up, then vacuum form that whole thing. Pull out the plastic (leaving in one sheet, don't cut apart), then split the two wood forms apart. Your double-height vacuum formed plastic will now stick through one wood form at double-thickness IN ONE SHEET. Easy-peasy.

@ChadsCustomCreations

Жыл бұрын

Yes this is definitely the way!

Very cool video and ideas. I don't have enough time to keep chasing these great ideas. Nice to hear business is going well wishing you continued success.

@ChadsCustomCreations

Жыл бұрын

Thank you Rob!

Great job in all you do... with peace in abundance... thanks for Sharing your work and videos... really appreciate them.... I learned a lot from watching as well😊

@ChadsCustomCreations

3 ай бұрын

Thank you Albe those words mean a lot to me. More videos coming soon.

whats neat about these is you can use it to make a mold out of anything and then use that mold to pour your own plastic or epoxy and make all kinds of things

@ChadsCustomCreations

Ай бұрын

Definitely love the mold making capabilities.

I have a 3D software by Xara, and doing people's names in 3D is really cool, especially in a script font. Just wondering how you could incorporate a person's name into something like a poster, special card, or whatever else you could think of. I also have created over 6,000 unique graphic designs that possibly could be used in some way. Really enjoyed your video.

@ChadsCustomCreations

2 ай бұрын

Great idea!

This was a really good video. It builds enthusiasm and encouragement to reach for more exceptional solutions to creative enlightenment!

@ChadsCustomCreations

Жыл бұрын

I really appreciate those kind words and encouragement!

something my shop teacher would have us do for the tight spots with depth issues like you had with the "R" is while its still being vacuumed use a torch or a heat gun to reheat the plastic to get sharper corners and full depth vacuuming

@ChadsCustomCreations

Жыл бұрын

What a great idea and I am super jealous as I never got the opportunity to have a shop class like yours!

You are so funny! I had a vacuform machine in the 60s. I made little boats, flowers, and bug creatures.

You could make 100% epoxy signs using the mold of a previously made sign. So for example, the Atari sign you just made. You could make the mold of the completed sign, use red epoxy to fill the letters. After it's cured, use the white epoxy to then fill the rest. Making several at a time, it's pretty cost effective and time saving. Sure, you have time in curing but just like the laser and/or cnc.....it opens up time to do other things while it does the rest. Just an idea, it's what I do.

@ChadsCustomCreations

Жыл бұрын

Amazing idea!!!

@MadsterV

Жыл бұрын

@@ChadsCustomCreations or you could make two molds, use one for white epoxy and another one where you cut out the letters to use as a painting mask so you can do it quickly and precisely.

@ChadsCustomCreations

Жыл бұрын

@@MadsterV great idea!

Now, don't go getting all big & bad over this. THIS... , is nothing new. In college, we built a rather large version & we could vacuum form a lot more than little bowls & watches and we used it to blow mold plastics Plexiglass, Uvex & PVC. Back then, the craze for conversion vans, all fixed up, was beginning & we made a lot of blowmolded roofs & windows. It took the auto industry about 15 years to catch up. We were doing vacuum forming & blow molding in 1970, so it's been a while. I made several light projects while in that class using both blow molding & vacuum forming. We could heat & use plastics up to 4 feet by 4 feet. We could make lenses in vary sizes for lighting effects. The Vac-u-form, was a toy invented by Eddy Goldfarb and released by Mattel in the 1960s around 1961 with the trademark filed on October 8, 1962. Based on the industrial process of vacuum forming, a rectangular piece of plastic was clamped in a holder and heated over a metal plate. So, it;s nothing new.

@ChadsCustomCreations

Жыл бұрын

I am for sure late to the game on this process but I definitely can’t help but be inspired by it. I bet I could learn lots from someone like you with lots of experience with it. I hope you follow along and offer me guidance as I implement in more in the future.

I love this! I have never heard of this technology

Thank you man . Hello from Kyiv !

@ChadsCustomCreations

Жыл бұрын

Thank you, so cool to hear my video made it all the way to Kyiv!

Don't close your google or etsy, instead, hire people to do the repetitive mechanic work for you, or hire someone to talk with clients, delegate, elevate your prices, but never refuse clients

@alienychris511

5 ай бұрын

this

@ChadsCustomCreations

2 ай бұрын

Mo money mo problems

@stevrgrs

2 ай бұрын

AI assistants :)

I love seeing your enthusiasm over essentially the same machine as the Vac-U-Form I got for Christmas in the 1960s. 😂😂😂

@ChadsCustomCreations

2 ай бұрын

I just bought one off of eBay can’t wait to try it out

That was fun and cool thanks!

@ChadsCustomCreations

3 ай бұрын

Glad you enjoyed it!

Wow!!! You really making me buy that laser cuter-engraver!!!🌟👌🏼🙏🏼👍🏼

@ChadsCustomCreations

Жыл бұрын

Haha sorry

Wow this is fantastic thanks more than the billions for this video🙌🏻🙏🏼👌🏼👍🏼👏you are great,greater and greatest 🇿🇲🤝🏼 continue with the same good job and videos.

@ChadsCustomCreations

Жыл бұрын

Thank you so much 😀

Best video on vacation forming !!!

@ChadsCustomCreations

2 ай бұрын

Wow, thank you!

Possiblites to be so creative 🔥🔥🔥 amazing video maybe pne the best youtube videos i ever seen

@ChadsCustomCreations

8 ай бұрын

That is too kind of you to say thank you so much 😊

A vacuum former was always on my list as a kid. I used to race r/c cars and the bodies are made via vaccuum forming (like the clip you showed)

@ChadsCustomCreations

Жыл бұрын

It’s pretty incredible, I’ve got plans for it in future projects for sure.

Glad you’re staying busy, Chad!

Superb my dear Friend.. thanks a lot

The way the Atari sign was made would be a good way of making personalised led signs you have pretty much everything you need just led strip and plug in supply.👍

I love machine like this,I always wanted to be a inventor growing up in a poor neighborhood I didn’t have a lot so I made a lot of kool things and my friends would come and play,I don’t think I have the time to learn how to work these machines but ima really thinking about getting a 3D printer

Enjoyd watching your video Thanks bud✋😎

@ChadsCustomCreations

Жыл бұрын

Thank you for watching, your work is great also!

WOW! First time out you made the Atari sign! That is amazing! I am inspired..

@ChadsCustomCreations

Жыл бұрын

Thanks so much 😊

Hey brother I am extremely inspired by you and your videos, and I think because of you I am thinking in getting into laser cutting, I purchased a Glowforge and I worked with it for a while, and today I will be receiving a delivery of the omtech 60 watt, but my biggest hurdle is how to obtain clients and projects, and I am willing to do anything, if you don’t mind mentoring someone who is very passionate about his family, that will be amazing. Thank you so much for your time.

@ChadsCustomCreations

Жыл бұрын

I have plans to talk more about my business in future videos

I have worked at a vacuum formed plastic factory. We made mostly fruit baskets that hold like a quart of blueberries or strawberries. We also made apple trays. It was a super boring job. This looks much more fun.

@ChadsCustomCreations

Жыл бұрын

I bet that did get boring but I bet those machines were amazing.

@TrevorStruthers

Жыл бұрын

@@ChadsCustomCreations yeah. They were much bigger than this. Lol. The rolls of plastic used for each machine had to be moved with forklifts.

Very, very interesting. Lots of good ideas to think about. 🤗😁

@ChadsCustomCreations

9 ай бұрын

Thanks for the positive vibes!

GREAT VIDEO. THANKS FOR SHARING. VERY USEFUL INFO.

@ChadsCustomCreations

11 ай бұрын

THANK YOU.

Great inspirational video. THX³

@ChadsCustomCreations

Жыл бұрын

My pleasure thank you for watching!

My first vacuum form machine was in 1967, Mattel Work Shop!

@ChadsCustomCreations

3 ай бұрын

Thanks to all of you mentioning the Mattel I was actually able to track one of these down and purchase one. If you think people would be interested I’d love to do a video on it, I am sure it would trigger some great nostalgic memories.

Another great video, Chad!

@ChadsCustomCreations

Жыл бұрын

Axel thank you for coming back to watch another!

oooooo a new way for me to look into making Resin Molds

@ChadsCustomCreations

Жыл бұрын

Yes I was curious about that also, what do you think mold release or something would be helpful?

so much idée in my mind thanks you for cheering

@ChadsCustomCreations

2 ай бұрын

So glad to hear this was helpful for you!

@legendarycarsTV

2 ай бұрын

@@ChadsCustomCreations god bless you 🙏🏽

If you used some translucent paint for the plastic, you could also add some LED backlighting to highlight the vacuum formed letters/symbols!

thank you for an amazing video

@ChadsCustomCreations

Жыл бұрын

Thank you for the encouragement Benny!

Damn. Now I need to get myself a vacuum former as well 😂Great video!

@ChadsCustomCreations

Жыл бұрын

🎶🎶Please tell us Pierre, please tell us Pierre, have you bought anything today 🎶🎶

@TheSwedishMaker

Жыл бұрын

@@ChadsCustomCreations haha that song is haunting my dreams 😂

Wow! That is so cool!

@ChadsCustomCreations

Жыл бұрын

Right! Where has this been all of my life!

Great vid dude, this would make an awesome mold maker for 3d printed items...for casting

@ChadsCustomCreations

Жыл бұрын

Yes this seems like a perfect pairing for a 3D printer!

I use to create custom fit sports mouthguards with a vacuum forming machine back in the day.

@ChadsCustomCreations

Жыл бұрын

So cool

This was a really good video. I think I need one of these haha

@ChadsCustomCreations

Жыл бұрын

Thank you Chris I really enjoyed making it! Reminds me when I got my first laser or 3D printer. Uncharted territory is always exciting.

If things get too busy in a business, you can raise prices to slow things down if you need a break. Finding the right balance is key. Now, back to watching this video and hope I don't get hooked into a new hobby.

@ChadsCustomCreations

Жыл бұрын

Yes you are absolutely right and I have had good success with that in the past, it worked out to half the amount of jobs for the same amount of pay. I’ve recently landed some big clients that are recurring and prices don’t really seem to matter to them. With them alone my business stays busy enough I don’t have to take on singular clients at the moment, but any of that could change at the drop of the hat. Thank you for watching.

I used to use a larger one of those 35 years ago in a professinal model shop producing consumer goods prototypes. We would make patterns from jelutong wood (cheap and very easy to cut and carve) and to get the plastic to pull into crevices etc we drilled small vent holes using piano wire with the end ground to make a flat spade end. You could even get it to drill holes in an arc and we often drilled them up to a foot long or more. We also put channels on the underside of the pattern to ensure all the holes got vacuum into them. For more durable patterns we would make wood ones and use the formings to cast tooling resin into (also needed vacuum holes drilling and where piano wire really shines). Your vent holes in the box are waaaay bigger than you need, 1mm holes are fine. The amount you can pull into a hole depends both on depth and the amount of taper on the sides verses the thickness of the plastic. You can look at using much thicker plastic and materials such as ABS but you need to pre-dry some types or they will produce bubbles in the plastic when the water in it boils. I used to stick the sheet under the heaters on low heat for about an hour or so for 3mm ABS sheet. Polycarbonate sheet can make VERY tough items but needs even more drying. Have fun with the machine! Steve in UK.

@ChadsCustomCreations

Жыл бұрын

This is some great info and love the fact that you used piano strings to drill holes that’s brilliant. Thank you Steve!

@Darth_Chicken

Жыл бұрын

@@ChadsCustomCreations I don't know what guage they were, pretty thick, but much cheaper than breaking lots of 1mm drills!

@douglasfuqua7082

Жыл бұрын

​@@Darth_Chicken That's 19 guage... Info: Gauge No Inch Metric 17 0.056" 1.4mm 18 0.048" 1.2mm 19 0.040" 1.0mm 20 0.036" 0.9mm

VERY INTERESTING. I stumbled onto ur channel. SO happy I did. Definitely a new subbie here. Man, oh man, I wish I could use resin in these as molds but im guessing the resin would eat the plastic. Cool beans.Thank you!

@ChadsCustomCreations

Жыл бұрын

I actually think resin would work it might need something like a mold release spray so it wouldn’t bind and get stuck to the plastic. Only other thing is if resin gets to deep it can heat up and the heat could warp the plastic. But they make resins that cure slower and produce way less heat.

I see Vacuum Former and automatically think: RC Bodies!! So many possibilities.

@ChadsCustomCreations

Жыл бұрын

Definitely a great application for it.

Awesome video!

@ChadsCustomCreations

11 ай бұрын

Thank you!!!

This is so cool!

@ChadsCustomCreations

Жыл бұрын

Thank you Monique!

That’s why I enjoy a cnc you can create inlays for push throughs.

@ChadsCustomCreations

2 ай бұрын

Great idea!

love the 2 patreon shouts outs! I did NOT see those before my last video 🙈

@ChadsCustomCreations

Жыл бұрын

You are forgiven 😇

@wittworks

Жыл бұрын

@@ChadsCustomCreations :)

Awesome video, I didn't think vacuum forming could be so versatile and interesting. Dental retainers were vacuum formed for decades but now many of them are 3D printed using SLA, If you look close you can see the layer lines.

@ChadsCustomCreations

Жыл бұрын

I think there is still so much to discover love that the community is sharing knowledge here in the comments I look forward to giving more updates as I learn more about what it can do. Oh you know you are right I do see the later lines on my Dandy aligners.

We have this, Very easy to use

@ChadsCustomCreations

Жыл бұрын

Awesome glad to hear others like it too, what do you find yourself using yours for. I am trying to compile more ideas for future videos on it.

This lite up would be freaking rad

Tall items will have issues with webbing forming at the corners, like they did on your tall box you tested. Make a frame that countours to the edges of what your pulling. Put it down over the plastic as youre pulling vacuum. That helps pull all the plastic flat. I'm told a bit more heat to make it stretch around those corners helps too, but that also takes more skill because pulling holes and tears is definitely a thing.

@ChadsCustomCreations

Жыл бұрын

Great idea, yes I thought I saw someone using that technique I’ll have to give that a try.

@NutjobGTO

Жыл бұрын

@@ChadsCustomCreations A while back I was looking into making RC car bodies, and there was someone posting videos of a fully automated vacuforming system, cranking out hundreds of copies of car shells. Part of setting up for a run was adding cleats, like 1x1x5 blocks, around your buck, at a right angle to where those webs are forming, to tension the plastic as it's being drawn down. Setting it up is a little bit voodoo, but if you're planning to crank stuff out in big batches, it seems easier than trying to juggle in an extra frame while you're dropping down the sheet.

I found your vacuum former video on KZread. My dad used a vacuum former in his dental lab as part of making dentures

@ChadsCustomCreations

Жыл бұрын

Awesome! Yes my works with a dentist and they use a small one for making all kinds of dental related things.

Vacuum forming is probably one of the most versatile and cost-effective processes!

@ChadsCustomCreations

7 ай бұрын

It’s pretty cool I love how well it pairs with 3D printing

That Atari sign caught my eye! ;) Nice vid!

@ChadsCustomCreations

Жыл бұрын

Playing that KZread thumbnail game I knew that would catch a urge of nostalgia with a certain demographic 🤫

@Geeksmithing

Жыл бұрын

Damn u

Excellente on all angles

@ChadsCustomCreations

2 ай бұрын

Thank you so much!

Excellent !

@ChadsCustomCreations

Жыл бұрын

Thank you!

Vacuum former is a good way to quickly make packaging that fits your product. Or a mold to cast more artsy stuff into, like sculptures.

Put some LED's behind your atari sign and you just made a cool custom lighted sign! Would be awesome in a man cave, game room, college dorm. Endless possibilities

@ChadsCustomCreations

Жыл бұрын

Absolutely I definitely need to add the lights.

Moar videos! I love your laser idea videos!!!

@ChadsCustomCreations

Жыл бұрын

Thank you for the encouragement! I will see what I can do, I’d love to put out more videos for sure.

Awesome thanks for the information nice

@ChadsCustomCreations

Жыл бұрын

Thank you for watching!

bro! This is fantastic. I'm going to go to bed tonight dreaming about things I can have you vacuum form for me....Congrats on the growing business! PS, I might catch your sub number in a few months 🤪

@ChadsCustomCreations

Жыл бұрын

Thank you Father Drew I really enjoyed this one such a cool machine. For real man I told you, once you finally get blessed by the KZread recommendations your channel’s going to blow up.

your laser looks so clean compared to my haha :D nice fun with vaccum cleaner keep doing

@ChadsCustomCreations

Жыл бұрын

Glad to hear I am not the only one 😂

I clicked because of title and then the atari logo in it. Worked

@ChadsCustomCreations

8 ай бұрын

I do have to confess I knew that the Atari logo would definitely target my people 😉

As crazy as it seems, this interesting amazing tech, that I have never wondered about, but am intrigued about....................

@ChadsCustomCreations

Жыл бұрын

That’s exactly what I was hoping to do. So glad to hear it.

Overall, very interesting, both the vacu-forming and all your other efforts (I cannot name them accurately). You also have a pleasant, engaging manner that helps in the business world. The trash bag thing at 1:57, no; that never would have occurred to me. My nerdness lies elsewhere. (Never mind.) I like to build, super-detail, accurise, correct, improve, modify, etc., polystyrene model kits, and to design and construct dioramas that display them in dramatic settings. (This entails several long stories, which must wait for another day.) One depicts two private passenger cars involved in a vehicular collision at an intersection, with serious structural deformation to one of the quarter panels, the hood, and possibly one of the front doors (each automobile would have a different quarter panel and door), which I infer would be a vacu-form project, to replicate the car body in a far thinner plastic that; upon cooling, one would press out of shape the portion involved, to manifest the “damage”. This may have complications, however, as the heat and the pressure may warp, deform, or possibly even melt the vehicle’s body, which I naturally would need to retain intact for assembling that portion of the kit undamaged. Perhaps casting a mold of the sedan’s and the coupe’s bodies in some sort of clay (or similar) that upon drying to hardness could serve in their place. I would use only the portion of the vacu-formed copy receiving damage for the diorama, leaving the remainder for another project that dramatises crumpling of the rear end. This diorama also would include two Ford pickup truck wreckers, two police cruisers, two ambulances, pædestrians and bystanders, etc., all attending to the crash; numerous other vehicles in the stalled traffic-one oddly familiar to you, with “Chads Custom Creations” on the side (as I never have seen it, you would have to build one); round 40 scale metres of streetscape as background, amongst numerous other details.

@ChadsCustomCreations

16 күн бұрын

Wow sounds like you have an incredible eye for detail I would love to see all of this!

Great video

@ChadsCustomCreations

Жыл бұрын

Glad you enjoyed it

Duuude! This is a great gig! Next investment is going into one of these ones.

@ChadsCustomCreations

Жыл бұрын

Awesome can’t wait to hear what you do with yours!

Very interesting!!

@ChadsCustomCreations

Жыл бұрын

I agree!

The lid for boxes - would be cool to have a brand or message due 3D printed into it. Easy to do I reckon

@ChadsCustomCreations

Жыл бұрын

Great idea I could also have engraved the bottom of the box with the laser to achieve that also.