This channel is like free gold.

@ToxicMrSmith

2 жыл бұрын

No it isn't.

@turtleman190

2 жыл бұрын

Free gold on the other hand is like free gold

@bikalimark

2 жыл бұрын

suspicious?

@chalocolina3554

2 жыл бұрын

Gold leafed horse puckey, I think you mean.

@ww-pw6di

2 жыл бұрын

The guy doing these videos for Easy Composites Ltd is like free gold for them.

This is the kind of video KZread was made for. Now I have to find something to make out of forged CF...

@daedalus_20v

2 жыл бұрын

Why am I not surprised to see you here? A forged CF Jaguar on the nose of the Jag would be bonkers! All hail the algorithm!

@JimBiddle.

2 жыл бұрын

Maybe a nice set of spats?

@jasonmajere2165

2 жыл бұрын

That new Honda motor needs some forged CF parts.

@marshalleng1933

2 жыл бұрын

You can literally make almost anything. Dash component, brackets, fuse box covers, center caps, door handles, ect

@fokjohnpainkiller

2 жыл бұрын

Can you please drop the boring electric stuff and build actual cool cars again?

I'm so glad the kit is actually reasonably priced. Less than £60 for an "everything you need" setup is much better than I expected!

@easycompositestv

Жыл бұрын

Appreciate the kind feedback about the kit Mark!

I've watched these guys' videos for years, and have used their awesome product line here in the US for my drones for years, and am SO grateful! Such an incredible operation, combining training and entry level packages to get in the game. Shipping costs can be a monster, but I don't have to buy everything in 5 or 50 gallon drums like some companies require, so it works out better for us. Thanks guys, love doing business with you all!

@easycompositestv

2 жыл бұрын

Really appreciate the comment Curtis and the kind words, thank you for your continued support!

@nickoutram6939

2 жыл бұрын

At least you don't have the dreaded 20% (YES Twenty percent!!) VAT to pay on every purchase. :o(

@andyspencer6308

11 ай бұрын

My favorite video is still the one where the bottle makes the fart noise

@louiscrespo1280

11 ай бұрын

Did you just order off their website for thebus

Does anyone but me marvel with this guy's delivery? He never says "um" "uh" "you know" "like", just straight forward perfect use of the Queen's English. It's rare these days to find anyone that speaks as well as this man does. Great job, great video!

@easycompositestv

2 жыл бұрын

Lonnie, you should see how many takes we do! I'd love to say we just smash this out first time but this 20 minute tutorial the best part of 5 days of filming! We film, it, edit, check it, discuss it, do it again, and again. It's definitely a process!

@lonniecrook1684

2 жыл бұрын

@@easycompositestv A very professional and educational video. Your efforts paid off.

@mccoulombe941

2 жыл бұрын

Serious toastmaster quality presenter. Oh and CF strong.

@Dumptheclutchevo

2 жыл бұрын

@@easycompositestv well thank you for being that way! it definitely shows and comes across brilliantly...there's a reason you have so many subs and views! - long time subscriber

@TheLowHybrid

2 жыл бұрын

3:25

Dude, at first I was like this is an advert for a company. But the fact you put such detailed instruction on use is what enables people to try these for themselves / start researching. Genuinely looking forward to the testing, as someone just generally interested in engineering/design, but with no formal education in the area. This is pretty cool.

@easycompositestv

2 жыл бұрын

Thanks Spike, yes, we’re not just producing adverts. Sure, we do sell composite materials, as well as make them, and make equipment, but mainly we love engineering and composites in particular and we’ve devoted the last 15 years to sharing this passion! We wish you all the best with your forays into these subjects 👍

@nickoutram6939

2 жыл бұрын

@@easycompositestv The combination of instructional video and 'all-in' kits is a winner IMO. Its like doing night classes, I look forward to more! Keep 'em up.

@easycompositestv

2 жыл бұрын

@@nickoutram6939 Appreciate the comment Nick, hopefully you enjoy the other upcoming videos too!

@robs7741

Жыл бұрын

It was sort of an advert but I must have this!!

These videos and the kit cost has opened an entirely new World! With a 3D printer and your products you legitimately have a small business.

This whole series is my comfort watch.

I'm shocked at how well these came out! I'm really looking forward to the strength testing video as I think that will be even more surprising! Well done done guys, great video!

@easycompositestv

2 жыл бұрын

Yes the first few parts I made with this simple method surprised me too! the mechanical testing video should really help to show the strengths (and weaknesses) of this material.

@donr62

2 жыл бұрын

In the case of the flywheel cover it's a no brainer that it'd be stronger than the plastic original.

@lenny108

2 жыл бұрын

seems this only pays out when doing it on the scale of mass production?

@easycompositestv

2 жыл бұрын

@@Mediamarked Thanks for the comment, yes it would be interesting to get the data from a composites novice (but 3D printing expert) I'll try to reach out to CNC Kitchen to see if he wants to give the process a go, I'm pretty confident even in the hands of a first-timer it will outperform any thermoplastic printing material. Thanks for the suggestion.

@Battlekell

2 жыл бұрын

@@easycompositestv Thank you for the amazing videos! Yes, a collaboration between you and CNC Kitchen would be great. While at it, it would also be nice to see how dimensionally accurate/straight the 3D printed patterns themselves are (which of course has a lot to do with the printer itself and the printed material) and how the forged carbon parts compare to them. I suppose there are a lot of applications that depend on accuracy and for home use with less special tools at one’s disposal it would be great if a 3D printed pattern or mould could get “close enough” to a milled aluminium pattern or mould.

I’m trying to start a side business building composite model gliders and your channel is a wealth of invaluable information already so thank you! Two things I’d love to see: 1. a video dedicated to surface finish and techniques for painting parts in the mold. 2. A USA based warehouse to purchase your products or cheaper shipping options to the states Keep up the great work!

@easycompositestv

2 жыл бұрын

Thanks for your kind words HighFlyer, we hope to make some videos on surface finishing and UAV wing construction in the near future as we agree that they would be very useful. A USA warehouse is something that we would love to do in the future as we know we have a lot of support over there.

@wdog103

2 жыл бұрын

Looking forward to it! Thanks!

@srinathreddy2032

2 жыл бұрын

I would also be very happy to see uav wing construction in ur channel

Super fascinating, thanks for sharing the process!

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video, thank you for commenting!

@abdelkarimmiloud3401

2 жыл бұрын

@@easycompositestv bonjours monsieur vous vidéo sont tres instructives et patiente, je voudrais savoir ce kit de moulage coûte combien ?

@easycompositestv

2 жыл бұрын

@@abdelkarimmiloud3401 You can find exact costs, including shipping on our easycomposites.co.uk website (for UK and rest of world customers) or easycomposites.eu (for EU customers); simply add the kit to your basket (you'll find it in the starter kit list) and then select your shipping country from the list :)

@easycompositestv

2 жыл бұрын

@@abdelkarimmiloud3401 the kit can be located on our website here; www.easycomposites.eu/forged-carbon-fibre-kit

@Cnzxco

Жыл бұрын

LOL WSG DANK

You guys are a miracle for people with the desire to learn composite work. I can’t wait to see your clear coating video!! That is something I’ve always fought with!

@easycompositestv

2 жыл бұрын

Hopefully our future video will answer all of your questions, if not please get in touch :)

Absolutely top notch content. Excellent presentation, explanation, and examples. Very interested in creating some carbon fiber parts from 3D printed molds, and when I do, you can bet I’ll be buying from Easy Composites. Bravo guys.

Such good videos as always! Clear, concise and full of tips and advice. Brilliant.

@easycompositestv

2 жыл бұрын

Thank you very much, appreciated.

Massive fan on the channel. Also surprised myself with a Forged Carbon kit for Christmas, gave it go right away and I'm blown away how easy it was to follow the steps in the video. Super happy with the first part, really in love with its looks. My next order of tools, resins, cleaners, etc. on your website has already been placed. Keep these videos coming! A satisfied customer

@easycompositestv

2 жыл бұрын

Very glad you enjoyed the video and were able to make a part from the kit. Hopefully you will continue to enjoy composites.

i myself am a foundry pattern maker, but i see myself learning a lot from these videos. the mold making video has really inspired me to try some new tricks!

@jfirebaugh

Жыл бұрын

That 3 piece mold idea could be adapted to making sand casting cores.

I have to say that you guys are absolutely awesome! Always enjoy watching Paul explain different processes with such detail. Would you guys ever consider doing affordable online classes that are even more in-depth? I think that is something that you'd be able to, not only be even more precise, but also give some kind of ''progress'' for the viewer (beginner-intermediate-advanced). Maybe even adding some kind of ''forum'' threads with the classes which makes it possible to talk with other students and help each other. If you ever do that, let us know on KZread, I'll be the first to enroll :)

@easycompositestv

2 жыл бұрын

Hi Mekanysm, Online courses is something that we have considered a few times and definitely something we would like to offer, composites being such a broad and practical topic would be quite difficult to get the balance of information correct. but if we can work out a good structure for some classes our KZread followers would be the first to hear about it.

@coxbow

2 жыл бұрын

@@easycompositestv count me in !

@spencermaiers8322

2 жыл бұрын

Scottish then? =)

The depth of the explanation is incredible! Very informative and very well done (and the parts look incredible as well!). Thank you

@easycompositestv

2 жыл бұрын

Thanks a lot, appreciate it 👍

Just used the kit yesterday. Awe-some! Really. It's so comprehensive and a perfect use, especially for educational practical assignments.

Didn't even know this was the kind of thing that was DIYable. Super cool stuff, the possibilities are endless

All of these videos are extremely well presented, massively informative, and wonderfully entertaining. I look forward to each one.

@easycompositestv

2 жыл бұрын

Thank you very much, really appreciate your feedback.

I love how one of our most high-tech materials is like "just eyeball it and stuff things in there".

Great vid, and looks like an awesome product / technique!! I know my way around a workshop, and have a little experience with resin, but never made anything close to precision tooling before, you make it look and sound so easy it gives me a little confidence, now all I need is the motivation!

@obtuseangler768

9 ай бұрын

Paul is a dangerous guy, he makes this look romantic and easy!

Thanks so much, super helpful. I'll be giving this a try soon.

@easycompositestv

2 жыл бұрын

Hi James, glad you enjoyed the video! We'd love to see the results!

These are always the best and most comprehensive videos. Paul - you are so clear and understandable. Thanks to all at Easy Composites who produce these first-rate youtube tutorials. I am now living in the states, so don't have such easy access to these products, but keep the tutorials coming!

@easycompositestv

2 жыл бұрын

Thanks Richard, appreciate the support and feedback. We're looking into some promising looking options to make our shipping into the US much more affordable. Nothing we can announce just yet but we are working hard on it.

Wow this is so awesome. Thanks for showing a 3D printed 3 part mold that seems like a really awesome way to build certain parts you'd normally need to machine or weld.

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video Dejay!

@KimmyR3

Жыл бұрын

@@easycompositestv do you have a video on how to draw those molds in Solidworks?

@federicomichelotti4188

Жыл бұрын

@@KimmyR3 hi, I have che same question, do you find the solution to draw those mold?

@jensenmiller6410

7 ай бұрын

@@KimmyR3 Depends on what you want to make. If it's your own part you have to make them yourself and determine the appropriate split locations. If you want to make the exact same lever they provide the CAD docs in the description.

@KimmyR3

7 ай бұрын

@@jensenmiller6410 Thanks, i actually missed it on the descriptions. i'd use them as excercise models in CAD

The hosts energy is infectious. This video made me so excited to start making stuff. >.

I really like the level of detail given here. So many things normally get tied up as "proprietary trade secrets" that no one ever learns about. As someone who's done research work with chopped carbon fiber composites (look up geopolymers for high temperature use) I'd say to try out planetary, high-shear mixing with ~3mm chopped carbon fiber to make castable materials. After a few minutes of planetary mixing, vibration will allow the composite to be easily poured/cast to shape.

@robbiejames1540

2 жыл бұрын

3mm sounds like it would probably be significantly weaker without some continuous fibre later in, though?

@Nuovoswiss

2 жыл бұрын

@@robbiejames1540 True, but it's not fair to compare strength of castable composites to continuous fiber composites. The versatility of being able to make any shape that you can 3d print a mold for opens up a lot of options for castables. Some of my samples were getting 50+ MPa in tension at 500°C, and could maintain that for short duration up to 1000°C in oxidizing environments (oxygen burns up the carbon fiber at those temps).

Well I waited for this video since your last video, on a serious note I learn a lot from you guys and thanks to Paul for not letting us take off our eyes from the screen, easy composites, I've been dreaming to build my own car and you guys are my go to in near future.. Hat's off🙂

@easycompositestv

2 жыл бұрын

Hi Jeet, thanks for the kind words, I hope we can help you with the technical support and materials on your car build!

Thank you for putting these videos together and going over the process in such great detail to cover all the little things that make a difference in successful quality casting. It makes it less intimidating to stop dreaming about trying it and get to work. Thanks for the inspiration.

@easycompositestv

2 жыл бұрын

One of the main reasons we upload our videos is to encourage others to try out the methods/ processes, if you do try this out please let us know how you get on :)

Free gold and an absolute masterclass in what marketing should look like! I want to watch it because it is educational and entertaining. Epic!

This is a goldmine. Anyone willing to do the research on what parts/items that are in high demand could make an enormous amount of money. I don't even care that they had an ad for their stuff at the end. The knowledge gained is well worth their sales pitch.

@ser_igel

3 ай бұрын

the whole video is an ad and it fucking works, because now i'm thinking "what can i do with forged carbon fiber" instead of "why would i make something out of forged carbon fiber" couple things make it way worse, like the kit itself being not that expensive and already owning a 3D printer

@someguy5035

3 ай бұрын

@@ser_igel It is. They could have kept it only for people that buy their products though.

Perfect filming, narration, information, clarity, absolutely delightful to watch. I don't think I'll be making any parts using this method anytime soon but I enjoyed watching it so much! Thank you!

@easycompositestv

2 жыл бұрын

Really appreciate the awesome feedback, comments like this are the reason we continue to produce content!

Been watching this channel since it's start and wishing I had a shop to be able to apply all the knowledge learned from it. Thanks for keeping these videos going, fantastic content as usual!

@easycompositestv

2 жыл бұрын

Appreciate the great feedback!

These are easily the best instructional videos on youtube. Just the right pacing and information density. It demystifies working with composites and makes me feel like I could do this at home and succeed first go. I particularly like the applications of 3d-printing. Thanks! I’m pretty sure I’ll buy a kit from you guys.

@easycompositestv

2 жыл бұрын

Thank you, that’s really great feedback, we appreciate it. Look forward to hearing how you get on :)

These step-by-step tutorials are explained and presented perfectly . Thank you for sharing your wealth of knowledge🙏🙏🙏 .

Doing this for already some years. And also been implementing directional fibers into a part for even better performance. ITs really cool process. p.s. drilling small air and resign escape holes are also great option for some parts.

@TheCraigy83

2 жыл бұрын

you spoke too much sense . bearly any comment activity.. Many see the bs . being sold the same product several times over.. They'll just add any buzz word then re sell it ''forged'' 😂 as you said they arnt doing anything new . 👍🏻

Those look AMAZING! Looks like it would be so fun and rewarding to do! One day i hope to be able to play around with this process and or vacuum molds

@easycompositestv

2 жыл бұрын

Thanks, get in touch when you want to give it a go we're always here to help.

I've been subscribed for a couple years now and I really appreciate the consistent detailed instructions and inspiration you all deliver. After watching this, I'm motivated to attempt to make a forged CF part for one of my project cars lol. Thank You!!!

@easycompositestv

2 жыл бұрын

We appreciate the comment and continued support!

thank you for all your videos, always straight to the point. perfect explanations, tips and advices. no interfering background music. great

hi Paul! hope you're doing well. i've been eagerly anticipating your follow up video and always looking forward to more of these fantastic videos in general, and its starting to feel like a long time since we've heard from you. just checking in to say that i hope everything is ok! this video inspired me to buy a whole bunch of material from you guys (kits were sold out so i went big 😀), but honestly i also haven't gotten around to using it. its been cold and my printer needed some TLC, but spring has arrived now and i'm super excited to get started. looking forward to learning more on the subject when you find the time. until then i'm gonna start playing around and wish you all the best!

@easycompositestv

2 жыл бұрын

You can find the video here: kzread.info/dash/bejne/l5mrzruaZqy3gMo.html

Wow! Excellent tutorial! Presented in an amazing way! Such a pleasure to watch! Keep up the wonderful masterpiece! Thank you so much for the wealth of information! What a great instructor!

@easycompositestv

2 жыл бұрын

Really appreciate the kind feedback!

I work in composite industry, these videos are so fun to do hobbyist composite project

I'm glad we finally reached the point of home made, DIY carbon fiber parts! The possibilities are endless.

@easycompositestv

2 жыл бұрын

We hope the possibilities keep increasing too!

I can't wait for the test in the next video! As a Mechanical engineer this test are always fun to study and predict. Thanks for all the good content.

@easycompositestv

2 жыл бұрын

Glad you are enjoying the series so far, hopefully the strength test doesn't disappoint!

@karlInSanDiego

2 жыл бұрын

Are you waiting for a long cure? Please show the test. I posted this on a FB group and people were very skeptical, claiming the forged name (I know you didn't coin it) was a misnomer. Let's show them it's a killer way to created a trick strong part.

@ivant5054

2 жыл бұрын

@@karlInSanDiego I can confirm that they didn't even watch the video usually the "forged" is refered to a regular prepreg wrap, so THEY are the ones using it incorrectly this tech was invented by Lamborghini and Boeing the forged carbon fiber parts that I made compare in mechanical properties to machined aluminum (same with the Boeing paper data) the advantage of these parts is that the load can be applied in any direction and still have the same properties, unlike traditional carbon fiber (which is strong in only one direction, although much stronger than forged)

That’s absolutely beautiful work that you have done there, I’ve always wanted to make carbon fibre parts before but always thought of the heat setting resins and I don’t have the machine to do that. I’m a FRP laminator and have made parts with that using both polyester and epoxy resins, but this gives me a bit more confidence to give it a try. Also I didn’t know that I could get that chopped carbon fibre material, I’ve always thought of the matting or cloth. Next time I’m at a store where I can buy some more materials for laminating I’ll ask about it. Thanks for this wonderful video.

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video David!

This is amazing. Truly a benchmark for other companies making diy stuff like this.

@easycompositestv

2 жыл бұрын

Glad you enjoyed Mikael!

Just found your channel today. These are the most succinct and easy to follow tutorials I've ever seen

@easycompositestv

11 ай бұрын

Glad you enjoy them and find them useful.

Mind blowing content as always, I really want to try this process out! I kind of want to get into composites, but as I'd be doing it as a hobby at home I worry quite a bit about safety. Do you have any good tips for how to work with composites safely in a home or at-home-workshop environment, and what the minimum requirements might be with regards to being in a ventilated area etc? Like for example could I do this on the balcony of an appartment, or is it simply not feasible to do anything like this safely without a proper workshop?

@jonathanw2036

2 жыл бұрын

Epoxy is very safe and is low odour - don't try polyester resins in your house or you will regret it! For epoxy just wear nitrile gloves and glasses for any splashes. No need for respirators etc when doing these processes, but when cutting/sanding/trimming you should wear a good quality dust mask/respirator.

@easycompositestv

2 жыл бұрын

At a very minimum you need a well ventilated work area, PPE like gloves, eye protection etc. Generally you would not want to do this work in confined spaces or living areas of your home. If you have lung problems or allergies to epoxy then certainly we would not recommend working in your home.

@SethJayson

2 жыл бұрын

@@jonathanw2036 You're right on those polys. Full charcoal breather and windows open with a fan evacuating and the garage will still smell awful. For cured part cleanup without mess and bad breathables, wet sanding is a great option too. I do most of my trimming right over a shop-vac nozzle (and a very fine particulate filter in there) because it not only takes care of the dust breathing problem; it evacuates the dust better from the part so I can see what I'm doing.

I honestly don't think I've ever come across a channel that just keeps producing more and more mind blowing content. I'm without a doubt keen to try this method out!! Looks messy and kind of a pain but the end result is fantastic. Can't wait to for the continuation of these episodes

@easycompositestv

2 жыл бұрын

Thank you for the feedback. It really is a great process (for the right parts). You're right that it can be messy, on the video we don't hold back - we could have made it look tidier but it's best to show it like it is. That said, it's fast, it's reliable, almost zero waste and the performance of the finished parts is really impressive. Would really look forward to hearing how you get on : )

I love that you made new warehouse for eu customers. Thank you!

@easycompositestv

2 жыл бұрын

Not a problem, it was essential post Brexit as the "new" method of UK to EU sales was very slow and expensive.

forged carbon just has such a aggressive look, love that on small details

Can't wait to see that strength comparison, this is a really cool technique!

@tedwingate

2 жыл бұрын

Hey Chris! Carbon approach skis on the horizon?

@Ccels5765

2 жыл бұрын

I’d be willing to bet traditional carbon fiber layup is 2-3x stronger than forged carbon

@tedwingate

2 жыл бұрын

@@Ccels5765 Without question.

@GoodRoads

2 жыл бұрын

@@tedwingate I'd love to take a stab at that if I can hunt down all the materials I'd need. It's hard to find the skinning cloth without adhesive on the back

@Dustmadeout

2 жыл бұрын

Depends on how you define strength. If it's tensile strength, then long fibers will be many times stronger than short ones connected just by resin. The bending and compression though will be pretty much the same.

Awesome video as always! And thank you for clarifying the terminology and explaining why it's used and what applications it fits into!

@easycompositestv

2 жыл бұрын

Thanks for the comment, glad you like what we do!

@chalocolina3554

2 жыл бұрын

He uses terminology incorrectly. This isn't forging.

I had no idea this could be done using such a relatively simple process. The possibilities are endless. Thanks for sharing. Subscribed.

@easycompositestv

2 жыл бұрын

Glad you enjoyed, thanks for the subscription!

What I'd love to see is a video on what would go into setting up a basic workshop, including how much space, worktops, clothing and PSE etc.

It would be interesting to see the chop strand bike lever bend tested in comparison to a one forged with a continuous tow (as much as you can fit continuous fibers into a tapered part like this)

@easycompositestv

2 жыл бұрын

Well you'll be pleased to hear that's exactly what we'll be doing in the next video, chopped forged vs continuous (optimised) vs printed continuous carbon fibre vs carbon filled nylon print vs aluminium.

@nickbell3546

2 жыл бұрын

I worry that a carbon fiber brake lever would be too dangerous for a mountain/bmx bike. Although it has the advantage of being lightweight and very rigid, it's also brittle. If you crashed and happened to pull to hard (or something of the sort), the lever could snap in the middle and could slice your hand open. I've talked with some BMX and scooter riders about this exact concern but with their handlebars.

@BodyDestruction

2 жыл бұрын

@@nickbell3546 you're right. Adding aramid fibres pretty much solves this problem, but I don't see it being done outside of motorsports.

@jakegarrett8109

2 жыл бұрын

@@nickbell3546 I imagine this would be more useful for motorcycles, they want the lever as stiff as possible, and when you wreck at speed it breaks pretty much any lever (even dropping them from standstill the metal doesn't withstand the 400-500 pound bike landing full force on the lever, so it needs to be replaced and very common to see broken levers). The alternative is you can weld aluminum levers, but its something of a safety concern (mostly because I suck at welding), though I've done it for my dirt-bikes lever, did a deep V chamfer on all sides on both pieces and slowly filled in. Its probably not economically practical solution for most though (you have to have an aluminum welder), cheaper to just buy new ones. Its not a part you want to be driving damaged and find out it snaps when you really need it when you're hammering the brakes, haha!

@jsin22366322

2 жыл бұрын

@@nickbell3546 *laughs in motorcycle enthusiasts*

Incredible informative and straightforward instructions as always! Great video, thank you.

@easycompositestv

2 жыл бұрын

Really appreciate the kind feedback, appreciate the comment Jon!

Paul is the Zen Master of Carbon and other high performance composites.

Excellent video. The willingness to test and answer the weight vs strength question earned the subscription.

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video, thanks for subscribing!

@easycompositestv

2 жыл бұрын

Hopefully you will enjoy that video which we are filming as we speak.

Extremely interesting as most of us have a 3D-Printer at home. Just opens up the possibility to easily cast carbon fibre parts. I, too, wonder how the strength compares. Cheers.

@easycompositestv

2 жыл бұрын

Our next video includes strength comparisons that will hopefully answer your questions

looking forward to the comparison with aluminum. If it work, this could be a great way to replace aluminum/steel parts for someone who do not have a CNC mill, for example to make bike dropouts etc

@pitdusk8

Жыл бұрын

But not use it on parts where has oil or a lot of heat, it will attack the epoxy resing.

I have a 3D printer. Using it to make strong, functional parts with it has always been a struggle, i feel like this will be a match made in heaven.

Just getting into making composites so videos like these are invaluable. Thank you very much for sharing your expertise and experience!

@easycompositestv

2 жыл бұрын

Really appreciate the kind feedback, glad you enjoyed the video!

Great video! Just a question regarding tolerance when designing the 3D printed mould. What tolerance would typically be required to allow the male section of the mould to move freely within the lower section, whilst remaining tight enough to eliminate any side to side movement or a fit that is too loose?

@easycompositestv

2 жыл бұрын

The tolerance is based on the gap for the fibres themselves which is around 2mm. For the actual Alignment, the top and bottom have minimal gap around the edges so the interface is tight.

BRB making my own Lambo Performante

One more incredibly high quality tutorial video. Thank you Easy Composites

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video!

Very good work !

As always, love this content. Just a quick question, when you say that you can leave the finish as raw carbon without clear coat, would that be okay if the part was in a high UV exposed area such as a part for a road bike? I love that matt finish also but unsure if it would degrade in UV? Well done Easy Composites.

@BryceHenley

2 жыл бұрын

It would be fine if you use a UV stable resin. You can always spray a matte clear coat over the part for the same result. Carbon specific paint is not required if you use a adhesion promoter like you would with any plastic or resin parts.

@easycompositestv

2 жыл бұрын

Hi Tim, as Bryce has commented it would be fine, our IN2 is very UV stable, and to be honest even if the resin wasn't that stable the carbon would block the UV right on the surface so it would not cause serious degradation.

@WhenDoesTheVideoActuallyStart

2 жыл бұрын

AFAIK that's more of a concern with aramid fibres (And the other, cheaper, polymeric fibres)

@mckenziekeith7434

2 жыл бұрын

All epoxy resins from all manufacturers degrade with exposure to UV. A road bike stored indoors would not be a high UV application, though. Also, the brake lever, being a thick part, would not be harmed by minor degradation of the outer layer of epoxy. But I would not recommend it for parts that are outdoors in full sun 365 days per year. If that is the intended use, some kind of clear coat should be applied (e.g., two part polyurethane clear coat). For thin walled, highly stressed parts (such as on boats), it is probably best to preserve the epoxy by painting over it with high gloss white paint.

Outstanding video ! It would be awesome to make another lever with some continuous tow through the straight section and test it as well ! I find one of the beauties of compression molding is also the ability to combine with other reinforcement to make only those complex features with chopped fiber.

@easycompositestv

2 жыл бұрын

You read our mind already! We will discussing combining chopped tow with continuous fibre for optimised mechanicals in the next video.

@SuperYellowsubmarin

2 жыл бұрын

@@easycompositestv awesome

Thank you Paul from Easy Composites for being you Paul from Easy Composites!

@easycompositestv

2 жыл бұрын

The artist formerly known as Paul from CarbonMods (check out those old videos to see how far we've come and how much his hair has changed!!)

Such detailed instructions love it. Motivates me to try this myself.

Another way which is quicker and a lot less messy is to coat the inside of the mould as normal and stuff it with dry fibre, clamp both halves and fill it with resin using hydraulic pressure from a dedicated grease gun. All you need to do is ensure you have risers built into your mould, which can also be flexible such as RTV Silicone which doesn't need a release agent. I've been doing it that way for over 25 years.

@robbiejames1540

2 жыл бұрын

While that process sounds very convenient, I'd worry that you'd need to place and size risers/vents really carefully to ensure no dry spots - have you ever encountered this?

guess im buying now few kilos of chopped carbon and hydraulic press ¯\_(ツ)_/¯

@easycompositestv

2 жыл бұрын

Go for it and let us know if we can help with your projects!

@BrzydkiBurak

2 жыл бұрын

@@easycompositestv your tutorials are enough help mate :)

This is brilliant! Once I move to my new place I can't wait to start printing some molds for small parts like mud guard or bicycle computer mounts for my new bike!

How thin of a crossection and hole to edge can you have on a part and still have reasonable strength? Thinking about trying this out on my prosthetic hands. Lmk.

@easycompositestv

2 жыл бұрын

Ultimately it depends on the load it will experience. Anything much thinner than 3mm is going to be relatively weak, however you could make it stronger by using long tows laid in the thin areas for more strength.

Paul's ID: Honorifics: Hi First name: Paul Middle name: From Surname: EasyComposites Profesion: Being awesome Awesomeness percentage: 100%

@easycompositestv

2 жыл бұрын

Haha, love it. Thanks..... [checks birth certificate].... yep.

I’m about to level up my workshop! Thank you

Amazing demo & narration. Very well done 👌

This is a great channel. Quality filming and editing, well-articulated, digestible points, and a clear expertise in the subject matter.

@easycompositestv

2 жыл бұрын

Really appreciate the kind feedback!

the idea that you can make full production quality carbon fiber parts with just a fiber kit and 3d printer is so cool! imagine custom-shaping brake levers for your bike or stuff like that.

Awesome, gonna make myself a shiftknob for my subaru! Love your content

OK, so coming back to watch this again in amazement. This is approaching magic.

@easycompositestv

2 жыл бұрын

Appreciate the comment, glad you enjoyed the video so much that you viewed it twice!

@rabidbigdog

2 жыл бұрын

@@easycompositestv Four times!!

@easycompositestv

2 жыл бұрын

@@rabidbigdog Well Four times is even better :D! Hopefully you enjoy the strength video as much- which is just receiving it's final edits!

wow this was 100% excellent - best Fiberfab tutorial video I have seen this entire year

@easycompositestv

2 жыл бұрын

Thank you for the awesome comment, glad you enjoyed!

I never knew this was possible. I can do SO MUCH WITH THIS!!!!!!!!!!!!!!!! WHERE HAS THIS BEEN MY WHOLE LIFE??????

3D Printer ordered, material ordered and tutorial on replay (cheers guys for the amazing channel)

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video and our channel! We'd love to see what you manage to make :)

What an utterly brilliant video! Very clearly explained.

I just found a great new reason to dust off my 3d printer, and put it to work! Great video!

Thank you for the detailed video, this is awesome.

An extremely satisfying video to watch even without a matching project at hand. Perfect for my evening YT binge.

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video!

@phaandorpertwee6981

2 жыл бұрын

@@easycompositestv Yeah, probably not exactly what you intended but whenever I have to replace something durable in the future or create something from scratch, this will defenitely be the way for me to go. Video and URL bookmarked.

FIRST OF ALL, subscribed. This is exactly what I didn't know I needed or wanted.

@easycompositestv

2 жыл бұрын

Thank you for subscribing!

WOW, awesome that E.C. has a channel ! I bought stuff from them like them like about ten years ago and and I look forward to watch videos and makeing cool stuff ! ! My product stalled years ago because of my personal / economic problems, but I am confident that the properties of thee material they sold me will , and can produce unexpected results even more greater than any expectations ! 💥💥💥💥💥

I watched your video and got some great tips for making forged carbon. I was having a really hard time releasing types. However, when I compressed the cling wrap I use in the kitchen by putting it in a mold, I was able to release it surprisingly smoothly. No tools were required and it could be opened by hand. I believe this is the smoothest method.

@easycompositestv

5 ай бұрын

It depends on the clingfilm brand, some release fine from epoxy, some do not.

most effective ad ive ever seen, i will be using your product

@easycompositestv

2 жыл бұрын

Glad you enjoyed the video :)

Not sure how I haven't come across this channel before but I'm glad I have.

@easycompositestv

2 жыл бұрын

Well, it's great that you've found us now. Please check out our back-catalogue and make sure you're subbed to find out about our new vids; they're not as frequent as we'd like but we put a lot of work into them :)

Dude! U R absolutely amazing and I appreciate that you have posted a video like this. Thanks for the video

I appreciate the 3D print design tips, not a lot of people talk about designing for fff manufacturing. If you’re experiencing bulging at the edge of prints, try tuning your print speed and acceleration because there will be a sweet spot between slow and fast that eliminates a lot of artifacts

I got plans for ducted fans that need to be very light and I think this is the answer! Gotta get a testing kit soon.

Paul, what an excellent video. What makes this so good, is that your camera work is very good, and your explanations are even better. You're economical with your spoken script, but fully explanatory. Lots of detail. I agree that this is what KZread was made for. Well done ! Tom, Ottawa Canada.

@easycompositestv

2 жыл бұрын

Glad you like the content and the presentation of it. We try to keep the videos high quality and strike the right balance between detail and an approach all can understand.

Couldn’t of said it better-pure gold maybe……