►► Get guide to building a measurement rig for under $250 www.producedbymkc.com/audioto... 00:00 - Intro 01:23 - Reasons for purchasing and switching 04:20 - Measurement data in SMAART
Жүктеу.....
Пікірлер: 41
@Bubbleuprubberdown Жыл бұрын
I got the mic and calibrator combo a couple years ago. Worth every penny. Sound Design Live has a link for calibrating two different mics to match.
@MichaelCurtisAudio
Жыл бұрын
It's been awesome. Glad to finally have it.
@allitode Жыл бұрын
Just got the same mic and calibrator from RA a few weeks ago! Would love to see how you might get OSM to match the functionality of Smaart SPL and what sort of screen configuration you have during the show. Would also love to see what the difference in screen setups might be if you're at FOH vs SE. Thanks for all you're doing!
@MichaelCurtisAudio
Жыл бұрын
That's a great idea. I haven't dug into the new SPL features in OSM, but it's on the docket. I can say that the SPL functionalities in SMAART v9 are very robust!
@BobJones-bh9qz Жыл бұрын
Firstly, thanks a ton! I've been watching all of your videos learning how to get off the ground with system tuning and am about to get a tuning setup at your recommendation. I'm in a volunteer position at my church and thankfully have a lot of liberty to make changes and improvements with the system, and was wondering what would be your ideal setup to be able to implement stereo correctly in a small to medium church? I know you made the video on why you prefer the divide and conquer setup where true stereo isn't feasible, but what would be your ideal stereo setup? Thanks!
@MichaelCurtisAudio
Жыл бұрын
Hey, Bob. Glad my videos have been helpful to you! If stereo is a high priority, the best way to implement it is to make sure that both your left and right mains speakers are each able to cover the entire audience by themselves. That way each audience member will get at least SOME information from both speakers at all times. You will likely have to put your mains out wide then toe them in. This is tough is wide or fan shaped rooms, easier in longer rooms.
@BobJones-bh9qz
Жыл бұрын
@@MichaelCurtisAudio thank you so much for the response!
@MichaelCurtisAudio
Жыл бұрын
@@BobJones-bh9qz You got it!
@kylefolger Жыл бұрын
The 7150 has been a great microphone. I had never heard of them years back and someone said I should buy iSEMcon microphones. I was told the US partner was located 20 minutes from me and I could buy from him. It’s amazing looking at the response file on the USB stick since it’s already really flat. After watching your videos, I think I’m going to look into using SMART some more and buying two more of the 7150 microphones. I have been using S6D for a while with their interface which is great and portable, but I want to use more microphones at the same time.
@MichaelCurtisAudio
Жыл бұрын
Glad you've been happy with them! After about 20 gigs with the four iSemCon mics I have now, I can really say they're top notch. I run all four into my Audient EVO 8.
@kylefolger
Жыл бұрын
@@MichaelCurtisAudio I’m glad you have had success with the Audient EVO because I had heard about that interface but haven’t used them. I think one of these would be more portable and throw-away than traveling with my RME.
@MichaelCurtisAudio
Жыл бұрын
@@kylefolger It's pretty hard to beat at $199.
@douglasgrimm4173 Жыл бұрын
The isemcon 7150 are hard to find !
@MrWillihelmdueck Жыл бұрын
Hey, thanks for sharing your knowledge with all of us! I just bought the Sonarworks reference mic as it was the cheapest one that comes with a calibration file in my area. As I was using it in my church during the service I listened what comes in and I noticed that there is constant noise that sounds like a cell phone is active nearby. Is that something you have experienced before?
@MichaelCurtisAudio
Жыл бұрын
That's interesting. No, I have not experience that with that mic. Have you tried plugging it in and monitoring on a different desk or audio interface? And do you know if it's getting adequate voltage from phantom power?
@MrWillihelmdueck
Жыл бұрын
@@MichaelCurtisAudio had it connected to a Digigrid IOX with 48V enabled. I did not had a chance to listen to it on another Interface yet. Maybe I will just return it and get another mic.
@MichaelCurtisAudio
Жыл бұрын
@@MrWillihelmdueck I'd maybe check it on another interface, then also record a mic you know has no noise (grab a SM58 or something) and compare the two. If the noise floor is significantly different, then yes I'd return it.
@TheRobertCostello2 ай бұрын
Have you tried the Beyerdynamic MM-1?
@b_14-m8p Жыл бұрын
Could you please make a video how to measure with tuning rig for under $250 step by step tutorial
@MichaelCurtisAudio
Жыл бұрын
A video of me tuning in the field is coming later this year. This video shows you how to connect everything together: kzread.info/dash/bejne/ap2rqMx6ndKehLA.html
@jen3800 Жыл бұрын
up here in Canada that mic is $1000.00 ! $330 would be a steal! Even after converting USD to CAD. Where the heck do you get these deals?
@MichaelCurtisAudio
Жыл бұрын
Hmmm. even from the Rational Acoustics website?
@iainmcdermid3574 Жыл бұрын
At 6:28 you have a shortcut to "normalize at 1K". What is that shortcut, and is there a list of all shortcuts available for SMAART?
@MichaelCurtisAudio
Жыл бұрын
It's "shift + click" on the frequency in the magnitude graph.
@iainmcdermid3574
Жыл бұрын
@@MichaelCurtisAudioits always so simple haha, thanks!
@MichaelCurtisAudio
Жыл бұрын
@@iainmcdermid3574 I know, right?!? When I found out about that feature I though, "I'VE BEEN MISSING THIS FOR WAY TOO LONG."
@BrianSimmons Жыл бұрын
If you have a 3d printer, you could easily make a new adapter for the TM1 mics instead of paying Audix $40.
@MichaelCurtisAudio
Жыл бұрын
Great point! I don't have a 3D printer, but could probably ask a buddy to go for it.
@Bubbleuprubberdown
Жыл бұрын
@@MichaelCurtisAudio if the adapter is just a little too big you can warp a little e-tape around the Audix mic. You just need a snug fit.
@MichaelCurtisAudio
Жыл бұрын
@@Bubbleuprubberdown Good to know! Thanks for that tip.
@laszloturi9633 Жыл бұрын
Hi! I downloaded the new version, but its keeps fail, if i try to open its open in full screen but the program is only on the corner in small and then it's frozen and than close. What can i do? I'm on windows.
@MichaelCurtisAudio
Жыл бұрын
The new version of what software?
@laszloturi9633
Жыл бұрын
@@MichaelCurtisAudio OpenSoundMeter
@magoostus Жыл бұрын
So i've heard that with MEMS capsule mics, the variance between produced mics is so negligible there is no reason to have calibration files for each mic
@MichaelCurtisAudio
Жыл бұрын
I'm not sure what techniques and capsules each of these measurement microphone manufacturers are using, but what I can speak for is that all four of the iSemCon EMX-7150 microphones that I have now are incredibly close in both overall sensitivity and frequency response. I never use the calibration files.
@magoostus
Жыл бұрын
@@MichaelCurtisAudio oh thats awesome, calibration files can be a hassle sometimes :P
@MichaelCurtisAudio
Жыл бұрын
@@magoostus One less variable to worry about!
@jasonbarbaree7751 Жыл бұрын
What SPL calibrator are you using?
@MichaelCurtisAudio
Жыл бұрын
The iSemCon SC-1: www.rationalacoustics.com/products/isemcon-sc-1
@Drummerboy106 Жыл бұрын
How do you feel about the earthworks measurement mics?
@MichaelCurtisAudio
Жыл бұрын
Earthworks mics are fantastic! I've used them several times.
Пікірлер: 41
I got the mic and calibrator combo a couple years ago. Worth every penny. Sound Design Live has a link for calibrating two different mics to match.
@MichaelCurtisAudio
Жыл бұрын
It's been awesome. Glad to finally have it.
Just got the same mic and calibrator from RA a few weeks ago! Would love to see how you might get OSM to match the functionality of Smaart SPL and what sort of screen configuration you have during the show. Would also love to see what the difference in screen setups might be if you're at FOH vs SE. Thanks for all you're doing!
@MichaelCurtisAudio
Жыл бұрын
That's a great idea. I haven't dug into the new SPL features in OSM, but it's on the docket. I can say that the SPL functionalities in SMAART v9 are very robust!
Firstly, thanks a ton! I've been watching all of your videos learning how to get off the ground with system tuning and am about to get a tuning setup at your recommendation. I'm in a volunteer position at my church and thankfully have a lot of liberty to make changes and improvements with the system, and was wondering what would be your ideal setup to be able to implement stereo correctly in a small to medium church? I know you made the video on why you prefer the divide and conquer setup where true stereo isn't feasible, but what would be your ideal stereo setup? Thanks!
@MichaelCurtisAudio
Жыл бұрын
Hey, Bob. Glad my videos have been helpful to you! If stereo is a high priority, the best way to implement it is to make sure that both your left and right mains speakers are each able to cover the entire audience by themselves. That way each audience member will get at least SOME information from both speakers at all times. You will likely have to put your mains out wide then toe them in. This is tough is wide or fan shaped rooms, easier in longer rooms.
@BobJones-bh9qz
Жыл бұрын
@@MichaelCurtisAudio thank you so much for the response!
@MichaelCurtisAudio
Жыл бұрын
@@BobJones-bh9qz You got it!
The 7150 has been a great microphone. I had never heard of them years back and someone said I should buy iSEMcon microphones. I was told the US partner was located 20 minutes from me and I could buy from him. It’s amazing looking at the response file on the USB stick since it’s already really flat. After watching your videos, I think I’m going to look into using SMART some more and buying two more of the 7150 microphones. I have been using S6D for a while with their interface which is great and portable, but I want to use more microphones at the same time.
@MichaelCurtisAudio
Жыл бұрын
Glad you've been happy with them! After about 20 gigs with the four iSemCon mics I have now, I can really say they're top notch. I run all four into my Audient EVO 8.
@kylefolger
Жыл бұрын
@@MichaelCurtisAudio I’m glad you have had success with the Audient EVO because I had heard about that interface but haven’t used them. I think one of these would be more portable and throw-away than traveling with my RME.
@MichaelCurtisAudio
Жыл бұрын
@@kylefolger It's pretty hard to beat at $199.
The isemcon 7150 are hard to find !
Hey, thanks for sharing your knowledge with all of us! I just bought the Sonarworks reference mic as it was the cheapest one that comes with a calibration file in my area. As I was using it in my church during the service I listened what comes in and I noticed that there is constant noise that sounds like a cell phone is active nearby. Is that something you have experienced before?
@MichaelCurtisAudio
Жыл бұрын
That's interesting. No, I have not experience that with that mic. Have you tried plugging it in and monitoring on a different desk or audio interface? And do you know if it's getting adequate voltage from phantom power?
@MrWillihelmdueck
Жыл бұрын
@@MichaelCurtisAudio had it connected to a Digigrid IOX with 48V enabled. I did not had a chance to listen to it on another Interface yet. Maybe I will just return it and get another mic.
@MichaelCurtisAudio
Жыл бұрын
@@MrWillihelmdueck I'd maybe check it on another interface, then also record a mic you know has no noise (grab a SM58 or something) and compare the two. If the noise floor is significantly different, then yes I'd return it.
Have you tried the Beyerdynamic MM-1?
Could you please make a video how to measure with tuning rig for under $250 step by step tutorial
@MichaelCurtisAudio
Жыл бұрын
A video of me tuning in the field is coming later this year. This video shows you how to connect everything together: kzread.info/dash/bejne/ap2rqMx6ndKehLA.html
up here in Canada that mic is $1000.00 ! $330 would be a steal! Even after converting USD to CAD. Where the heck do you get these deals?
@MichaelCurtisAudio
Жыл бұрын
Hmmm. even from the Rational Acoustics website?
At 6:28 you have a shortcut to "normalize at 1K". What is that shortcut, and is there a list of all shortcuts available for SMAART?
@MichaelCurtisAudio
Жыл бұрын
It's "shift + click" on the frequency in the magnitude graph.
@iainmcdermid3574
Жыл бұрын
@@MichaelCurtisAudioits always so simple haha, thanks!
@MichaelCurtisAudio
Жыл бұрын
@@iainmcdermid3574 I know, right?!? When I found out about that feature I though, "I'VE BEEN MISSING THIS FOR WAY TOO LONG."
If you have a 3d printer, you could easily make a new adapter for the TM1 mics instead of paying Audix $40.
@MichaelCurtisAudio
Жыл бұрын
Great point! I don't have a 3D printer, but could probably ask a buddy to go for it.
@Bubbleuprubberdown
Жыл бұрын
@@MichaelCurtisAudio if the adapter is just a little too big you can warp a little e-tape around the Audix mic. You just need a snug fit.
@MichaelCurtisAudio
Жыл бұрын
@@Bubbleuprubberdown Good to know! Thanks for that tip.
Hi! I downloaded the new version, but its keeps fail, if i try to open its open in full screen but the program is only on the corner in small and then it's frozen and than close. What can i do? I'm on windows.
@MichaelCurtisAudio
Жыл бұрын
The new version of what software?
@laszloturi9633
Жыл бұрын
@@MichaelCurtisAudio OpenSoundMeter
So i've heard that with MEMS capsule mics, the variance between produced mics is so negligible there is no reason to have calibration files for each mic
@MichaelCurtisAudio
Жыл бұрын
I'm not sure what techniques and capsules each of these measurement microphone manufacturers are using, but what I can speak for is that all four of the iSemCon EMX-7150 microphones that I have now are incredibly close in both overall sensitivity and frequency response. I never use the calibration files.
@magoostus
Жыл бұрын
@@MichaelCurtisAudio oh thats awesome, calibration files can be a hassle sometimes :P
@MichaelCurtisAudio
Жыл бұрын
@@magoostus One less variable to worry about!
What SPL calibrator are you using?
@MichaelCurtisAudio
Жыл бұрын
The iSemCon SC-1: www.rationalacoustics.com/products/isemcon-sc-1
How do you feel about the earthworks measurement mics?
@MichaelCurtisAudio
Жыл бұрын
Earthworks mics are fantastic! I've used them several times.