***EDIT*** Some of my pieces coated with Art Resin have started to show some yellowing. Since making the video, I have changed to Let's Resin. I like working with it, but haven't used it long enough to know how resistant it is to yellowing.

@capecharlesart1850

6 ай бұрын

Much appreciated

@madebymellyjewelry

6 ай бұрын

@@capecharlesart1850 Thanks for commenting ❤️😁

@liveheir8959

6 ай бұрын

thank you for confirming Art Resin now shows some yellowing. ignore my other post

@liveheir8959

6 ай бұрын

we will try Varathane water based polyurethane on polymer clay, then uv resin

@madebymellyjewelry

6 ай бұрын

@@liveheir8959 you're welcome. Yes, it's definitely showing the yellow. Nowhere near as bad as the UV though. I've since seen other videos with resin test where Art Resin performs very badly compared to the others like Let's Resin & JDiction.

the yellowed… are still very nice. You notice the difference because you’ve seen the original, but other people, when we are looking at it, we don’t know what was the original color. I learned a long time ago, I’ve been selling jewelry since my 20s, I’m now in my 60s, I sold a lot more mistakes than perfection. Lol. We as artesian’s, always see the flaws… the buyers, don’t notice unless we point it out! I personally learned, if I had 2 to 3 people looking at it and saying oh your resin tarnished or boy is that an ugly color. I pulled the piece. But there was people that bought my flawed items, because they couldn’t figure out how I achieved that color, and they loved the color. Sometimes, people purposely try to achieve that look. I personally liked all your pieces . You make beautiful pieces! Beautiful work💕

@melodyengland4439

Жыл бұрын

Oh yes, everything you have written here, makes tons of sense, heck i couldn't have said it any better myself. I really liked her jewelry pieces, the slightly damaged ones that used to be white are now ivory colored, i love ivory colored jewelry. Also the earrings that had pinkish on one side & more of a salmon color on the other side, could be reversable styles.

@madebymellyjewelry

Жыл бұрын

Yes, we always see all the flaws, & we are our own worst enemy. Thank you so much. I'm glad you liked my pieces ❤️ Thank you for watching & commenting ❤️

@madebymellyjewelry

Жыл бұрын

@@melodyengland4439 thank you very much ❤️

All of your pieces are beautiful, even the yellowed ones!

@madebymellyjewelry

Жыл бұрын

That's very sweet. Thank you....and thanks for watching 😊

It looks very cool and vintage. I understand that it's frustrating, but many people would appreciate the yellowed variant.

@madebymellyjewelry

24 күн бұрын

@@hanatulibear9827 thank you 🥰 that's very sweet of you ❤️

Thanks so much for showing side-by-side comparisons. You’ve thoroughly convinced me not to use it on anything that I don’t want yellowing on. I do a lot of dark wood pieces so the yellowing may not be noticeable. Thanks again.

@madebymellyjewelry

Жыл бұрын

You are very welcome. Ya know, you can test & try different types to see if they work for you. A lot of people in the comments have recommended the Let's Resin brand UV resin...they've said it doesn't yellow. I haven't tried it though, so IDK. I just wanted to show people what CAN happen. Thank you for watching & commenting ❤️

Thank you so much for showing this. I am just a beginner in resin jewellery (I'm in the UK) tho I have papercrafted for a long long time. I am so sorry you lost so much of your beautiful jewellery, and I am so grateful to you that I can learn from your experience. Subscribed to keep up with your creations. xx

@madebymellyjewelry

5 ай бұрын

Awww, such a sweet comment! That's exactly why I made this video. I've since learned that there are some UV resins that don't yellow as fast. When I first started out though, I saw EVERYONE (it seemed) in the polymer clay world using the Chinese resin from Amazon, so I did too. I WISH someone had told me this would happen! As I've said, as many others have said...ANY resin will yellow over time. It just all depends on how fast it happens! Thank you so much for watching & subscribing. I'm glad you found the video helpful. Thank you for your sweet comment 😊 ❤️

This video was linked on a fb group and I’m so glad! Super informative! Thank you for sharing your discoveries. Your pieces are beautiful…even the yellowed pieces.

@madebymellyjewelry

Жыл бұрын

Yay! I'm so glad you found it & that it was helpful 😀 Thank you...most of those pieces are pretty old. I much prefer my newer ones...but I love to see my progress as an artist. Thank you for watching, & hope you consider subscribing to my channel. My videos going forward won't have the little light flickers (except a couple I already have recorded). I'm also going to try VERY hard to upload more often ❤️

THANK YO SO MUCH FOR SHARING YOR ART AND EXPERIENCE! You see yellowing as an error in your beautiful pieces and I still see beauty on them. Have a great day!

@madebymellyjewelry

5 ай бұрын

Aww, such a sweet comment ❤️ Thank you very much for that 😘

I just started making polymer clay jewelry and actually have had horrible luck with resin. This vid has cemented that it's not for me. Thanks so much for this vid and the update!! The epoxy will take longer to use/make, but will last so much longer! Thanks again!

@madebymellyjewelry

4 ай бұрын

You're very welcome 😁 I'm glad it was helpful. Thanks for watching ❤️

So many of your pieces are still beautiful. If I didn't know what it looked like before the UV resin yellowed, I would not think anything of it and I would think it was a beautiful tint. The big pendant and the bracelet with the beads that yellowed in the center need a little work, but imho, the rest are still easily sellable.

@madebymellyjewelry

Жыл бұрын

Thank you very much ❤️ & Thanks for watching 😊 The large necklace I gave to my sister, I think most of the earrings & things I sold on clearance. I still have a few left, but I never put them out for sale 😂

It is VERY DEPENDENT on what brand of UV resin you use. Even in the same brand you have to be careful and test them I’ve had good results with Let’s Resin new formula UV. Also the Limon brand in the pink flowers label bottles have not yellowed. Limon brand has a blue flower label version that yellowed very quickly. But the pink flowers ones havent. So far Let’s Resin new formula has done well.

@madebymellyjewelry

Жыл бұрын

Oh, I agree that the brand has a lot to do with it. But any of them will yellow eventually...UV or epoxy...it's just the nature of resin. Like you said, you can test them out, but then that could potentially be A LOT of wasted money. Personally, I'd just rather stick with an epoxy that won't yellow anywhere near as quickly. I also forgot to mention in the video that I get much better results, a much nicer, smoother, all around better looking surface with epoxy. The fact that I don't have to deal with the warping of my clay that usually comes with UV resin is another plus for me... although, there are ways around the warping of course. ❤️

Thank you for sharing. You will help a lot of people with this. I am sorry though for what happened to your beautiful jewelry.

@madebymellyjewelry

Жыл бұрын

Thank you very much 😊 And thanks for watching & commenting ❤️😉

I just found this. I'm about to put in an order for more uv resin which I've been using for about 2 years, selling at an outdoor market. I've not noticed yellowing , but I'm now afraid for my newer items. Thanks for your info - your work is gorgeous.

@madebymellyjewelry

Жыл бұрын

Thank you so much. I'm glad I could help. Thanks for watching 💗

@yingqingtang4128

4 ай бұрын

Thanks for sharing. Do you remember what brand uv resin you used for it?

Love your channel and thank you for sharing this information, I never knew resin would do that. I prefer Theresa's deep shine and its so easy to apply so I will just stick to using that.

@madebymellyjewelry

9 ай бұрын

Aww, thank you so much! And thank you for subscribing 😁 I really like the way that the Deep Shine resist yellowing, but I struggle to get a good smooth finish with it. The bangle in the video, I had to apply & sand & reapply a few times to get a really nice finish. All of them have advantages & disadvantages, I guess. Nothing is perfect 🤷

That is heartbreaking, those are so time consuming to make. Thank you for sharing.

@madebymellyjewelry

Жыл бұрын

Yes, it was so upsetting. Thank you for watching & commenting ❤️😄

There is one tip I was given and that’s to add the slightest touch of blue in the resin as this will help with stopping the resin from going yellowing. I just found a picture that I’ve had for 40 years now and the resin has not yellow at all with age, I have no idea what type it is. The only thing I can think of is that it was a bad batch of resin🤔🤔🤔

@madebymellyjewelry

Жыл бұрын

Hi 👋 I've heard that too...or violet. It won't really stop it from yellowing so much as disguise it (I think so, anyway). No it wasn't just a bad batch of resin, these pieces were made at different times with different brands, & I also had different bottles from each of those brands purchased at different times...hope that made sense. It's really late for me 😆 Anyway, thanks for watching & commenting ❤️❤️❤️

I love Art Resin!! Great product ❤

@madebymellyjewelry

Жыл бұрын

Really?....that doesn't seem to be the popular opinion in the comments here. It's the only 2 part epoxy I've ever used. I like it. One thing is that I love the flexibility of it. Works great with the flexible polymer clay. Although some pieces (made over a yr ago) that haven't sold yet are starting to yellow a tiny bit. Mostly noticable on pieces that have a lot of white in them. The Let's Resin brand is getting a lot of love in the comments. I'll probably try it soon.

Your jewelry is amazing!

@madebymellyjewelry

Жыл бұрын

Thank you very much & thanks for watching 💗

I have watched many videos on epoxy resin and UV resin where they do test pieces on various resins to see which yellow the most. All resins yellow eventually, no matter what the claim. Its finding the right ones to use from the videos i have watched. I am new to clay and resin and some of my first small pyramid pieces of resin art have yellowed in non direct sunlight while others from other resin hasn't. Thank you for the video. I think if you test the uv resin that is right for you before you give up, you will find one that will work for what you need..

@madebymellyjewelry

Жыл бұрын

Yes, any resin, UV or epoxy will eventually yellow. I'm happy that I switched to epoxy because (I forgot to say in the video) I get a much nicer, all around better finish with the Art Resin. I'd prefer it even if UV resin didn't yellow quicker. I just wanted to inform people that might not know that this can happen. Like I said, I knew resin would yellow (when I first started) I just had NO IDEA it would happen so fast. So far though, I do like the Deep Shine for instances where I just can't use epoxy. Honestly though, as my work, experience, & skills progress I'm trying more & more to create designs that I don't need to use resin. Obviously, it still has its place in my work, I'd just rather avoid it all together when I can. Even some of my Art Resin pieces have started to yellow a tiny bit. Like you said, I could test lots & lots of UV resin, but I'm perfectly happy using epoxy resin when I need resin. I like it much better anyway. I think when a lot of people are starting out, they start out with UV resin, as I did because it just seems easier. Once I tried the Art Resin, i realized that (in my opinion) it's far superior to UV resin for many reasons. But...everyone has to decide what works best for them. ❤️

JDiction UV resin doesn't yellow. It is actually the only resin I have tried that doesn't totally flip my switch one way or another!😂 Great info! Thanks for sharing!😊❤

@madebymellyjewelry

5 ай бұрын

Nice! I'm glad you found one more works for you. A lot of people have recommended that one in the comments. I'm glad you enjoyed the video. Thank you for watching & taking the time to comment ❤️

Very informative. Thank you! 😊

@madebymellyjewelry

3 күн бұрын

@@CraftTimeStudio thanks. I'm glad you found it helpful 😊

Thank you for this video. I've been watching lots of resin videos because it looks like a good hobby I can eventually turn into making a few extra dollars with. I'm going to start with the UV..... then if I decide I like it I'll change it up to the other resin. I am getting the lets resin one. I was actually looking to see how using gel nail polish on the pieces with the resin looked when I came across this video!

@madebymellyjewelry

6 ай бұрын

Awesome! I'm so glad that you found it helpful. I've since watched other videos of resin test & the Let's Resin & JDiction UV resins did great in test. I wish you luck with your new endeavor! Thank you for watching & taking the time to comment ❤️

art resin is actually the worst. there are many artist that tested many different brands and had them outside for 6 months. Art Resin was very yellow. Jdiction is the best, doesn't yellow and the UV resin works great. i live in AZ and have my pieces in the window, and they have done great.

@madebymellyjewelry

Жыл бұрын

Cool. Thanks for the info...& Thanks for watching 😊

@madebymellyjewelry

Жыл бұрын

In all the test videos that I watched people do...the art resin did great. Really, the only way to know is to try it out for yourself 💗

@Vsv1224

Жыл бұрын

@@madebymellyjewelryKS Resin or Counter Culture DIY both make a great 2 part resin with great UV protection. I guess like anything, we have to see who paid for the tests. Steve McDonald of Steve McDonald Arts and Crafts did a test on several resins. Teexpert held clear better than the ones he tested, even the JDixon he uses. It’s tough to find one, I know.

@alexanderholden82

Жыл бұрын

I totally agree... However I recently tested J dictions low viscosity resin and it started to Yellow slightly within a couple of weeks when set among other pieces that I was testing, however their original formula did well in my testing... At this point with over a year of experience using UV resin follow the one UV resin that I've tested that hasn't yellowed at all is let's resin UV resin believe it or not.

@madebymellyjewelry

Жыл бұрын

@@alexanderholden82 other people have said in the comments that the Let's Resin is a good UV resin. Now, the Jdiction that you said did well...is it epoxy or UV?

I love your work

@madebymellyjewelry

Жыл бұрын

Aww, thank you so very much. Everything I showed as examples is pretty old...really, some of my first work. I personally feel like my work is quite a different now. You know, as time goes on, not only do your skills improve, but you develop more of your own personal style. ❤️ Thank you so much for watching & I hope you'll subscribe...I plan to start doing a lot more videos ❤️

Thanks for sharing! Ug. It's absolutely gutting. I've had to trash so many expensive coasters w/in 4 months of creating them, even keeping them out of the sun! I've tried 5 well-known epoxy resins, too. And, realizing that the pieces customers purchase in good faith will amber...cringe.

@madebymellyjewelry

9 ай бұрын

Oh no 😭 I feel your pain!!! Based on recommendations in the comments, I decided to try the Let's Resin brand of epoxy. I've used it once, & while I have no idea how it will hold up against yellowing...I really enjoyed using it. It was very nice to work with. The Art Resin is definitely not holding up as well as I expected it to 🙄 Thanks for watching & commenting

I'd wear all of them, yellowed or not, they're gorgeous!

@madebymellyjewelry

14 күн бұрын

@@dianadevlin3717 aww, that's so sweet of you to say ☺️ Thank you very much...I really appreciate that ❤️

Thanks for the heads up

@madebymellyjewelry

Жыл бұрын

Very welcome! Thanks for watching 💗

WOW...TY fur the knowledge!!!

@madebymellyjewelry

Жыл бұрын

You are more than welcome! Hope it helps. Thanks for watching 💗

Thank you very much for making this video. I appreciate the heads up. I only use j.dickson and occasionally lets resin in epoxy. I don't care for UV. Resin. Thanks again. Good video.

@madebymellyjewelry

6 ай бұрын

You're very welcome! A LOT of people have said in the comments that JDiction is really good. I haven't tried it though. I've just learned that I like the epoxy resin much better. I get such a better finish with epoxy. I think UV resin just isn't my jam 😂 especially after this experience!

That earring that you took out of your hear looked like bone china and I love that look. Thank you for so much information that you have packed into this video. I joined up because you were just that good and pretty cool as well. 😊 Ah honey, all that hard pain staking work and such beautiful pieces, totally ruined just by being in the sun. I feel so sorry for you having to sand them down. Don’t throw them out, something will come along that may solve that issue for you.

@madebymellyjewelry

10 ай бұрын

Thank you so much ❤️ I'm glad you found the video helpful & I'm so happy you subscribed...I'm almost to 500!!! 🎉

@madebymellyjewelry

10 ай бұрын

I just looked....I'm actually OVER 500 now!!!🎉🎉🎉 Giveaway time 😉

your jewelry pieces are lovely. We learned that UV Resin doesn't go with polymer clay from watching this video. We believe if your original polymer clay pieces are yellow and cream, when UV resin turns yellow, the jewelry will be enhanced with age it will have a yellow tint.

@madebymellyjewelry

6 ай бұрын

Thank you. Yes, if the piece is already neutral or warm colors, then the yellowing isn't as much of an issue. Thanks for watching & commenting. I hope you consider subscribing 🥰

Your items are absolutely beautiful! I am a BIG fan of resin but I have gone to using only Lisa Pavelka. Not sure if it yellows. What I am curious about is how you resin the round bracelet - I am going to look on your channel to see if you have a video :-)

@madebymellyjewelry

Жыл бұрын

Thank you very much 😊 I'm pretty sure that Lisa's Resin will yellow also. I had a small bottle of it once, & it was yellow as soon as I put it on. The bottle was old, but still...that tells me it will probably yellow fairly easily, although I can't say 100%. No, I don't have a video on that bracelet. I made it long before I ever started my channel. I brushed it on with a brush, rotated it under the light as it cured. I put about 2 coats, sanded it smooth, then added the final coat.

Let's Resin and Vida Rosa has not yellowed on me. Try those.

@madebymellyjewelry

Жыл бұрын

Thanks for the suggestion & thanks for watching & commenting ☺️

What’s the best kind of earring post and necklace chains to use that don’t get dark or change colors or fade

@madebymellyjewelry

Жыл бұрын

The ONLY metal I use is stainless steel, or surgical stainless steel. Not a LOT of difference between the two. Both are hypoallergenic, super strong, won't change color, won't rust, won't tarnish, & won't discolor your skin. I changed to steel a long time ago & I plan to stay with it. I know gold colored metals are really popular right now, but I want my jewelry to last my customers a LONG, LONG, time...& using real gold won't work for my price point. I even prefer it to sterling silver because of the tarnishing of silver. Thanks for watching & commenting ❤️

Thank you so much for this information !

@madebymellyjewelry

Жыл бұрын

You are so welcome! Hope it helps. Thanks for watching & commenting ❤️

@Oonagh72

Жыл бұрын

@@madebymellyjewelryif you have some of that UV resin left over, try an experiment. From what I understand you should be able to put a drop of purple dye in the resin. Not enough to change the color but it is supposed to counteract the yellow when it happens. I’m suggesting this to you because you are the first person I have come across who can exactly replicate the conditions that caused the yellowing. I also forgot to say, as heartbreaking as the yellowing was, your work was still really beautiful.

@madebymellyjewelry

Жыл бұрын

@@Oonagh72 I may try that. I've heard that before & several others have also mentioned it in the comments. & Thank you very much. I definitely love making my jewelry. It makes me so happy when others love wearing it just as much as I love making it ❤️

Hi. This was a very insightful video! I recently bought two different brands of uv resin for my clay art and was hearing about resin turning yellow over time, I was wondering if the resin art is not in direct sunlight or by the window will it still yellow? I tested my resin on a random art piece and it's been looking great but I worry since I'm making sculptures for Christmas and I don't want them to turn yellow, especially the white ones. I also noticed theres a uv resin called Mr. Resin which is highly recommended by alot of artists for it's durability and longevity but it is a little pricey. Either way I am taking my chances as long as they are not by the sun.

@madebymellyjewelry

7 ай бұрын

I'm glad the video was helpful. Yes, resin will yellow... eventually...no matter what. Doesn't matter if it's UV or epoxy, doesn't matter if it's in direct sun or not...it will yellow. Now the speed at which it yellows is a different story. The type of resin, the direct sun, those things will affect the speed at which it happens. Direct sunlight will speed up the process. Also, UV resin will yellow faster than epoxy due to the UV activators in the resin. It's all a give & take. As with most things, you just have to figure out if the benefits outweigh the undesirable effects. It depends on what you're using it for too. Im sure your Christmas sculptures turned out beautiful. Hopefully the resin you used will hold up well over time ❤️❤️❤️ Thank you so much for watching & commenting. I hope you decide to stick around for awhile & subscribe ❤️

All resin will yellow over time. Depending on the brand and sun/light exposure. It doesn't matter if it is epoxy or uv resin. The only way to minimize it is not to use resin at all, or find a brand that is the lesser yellowing. I feel that using any products on your clay pieces will eventually have issues over time, too.

@madebymellyjewelry

6 ай бұрын

Yes, they All will yellow eventually. Just some faster than others. Thanks for watching 😊

@chucky6367

Ай бұрын

I did resin art years ago. I found the peices that were exposed to direct sunlight (ie; suncatchers or things left on windowsills) had developed yellowing and the ones not exposed didn't.

Hi! Super new to jewelry making. Is the gel polish you mentioned like…the gel polish where you put your nails under a UV light?

@madebymellyjewelry

5 ай бұрын

Hi 👋 Yes, I'm talking about UV gel polish top coat. It has to be the type that cures in a light. Regular nail polish (lacquer) is NOT at all compatible with polymer clay. I have no idea which brand I used, though. That was a long time ago. Just be SURE you test it out on some scrap before using it on a finished piece of jewelry. Some of the gel topcoats can yellow just as bad (or worse) as the UV resin. Thank you so much for watching ❤️❤️❤️

A good tip that I heard is that adding a little blue dye to the resin will stave off the yellowing. From what I gather in the YT maker scene, it's only the clear resin that's having issues. Anything that was dyed doesn't seem to be having problems even years later. I assume it's working the same way that adding blue to make your whites whiter and your darks darker?

@madebymellyjewelry

Жыл бұрын

Yes, I've heard that too. I don't think this would help the resins that yellow really badly (like the ones I used). At least, it doesn't seem like it to me, but I've never tried. Thanks for watching & commenting ❤️

@kouusa

Жыл бұрын

@@madebymellyjewelry It sounds like a fun experiment to try! I want to test it out sometime. : D I can't believe I forgot this. From watching restoration vids, it looks like hydrogen proxcide and UV light can reverse yellowing in plastic. But I'm not sure if anyone has tested this with resin.

@madebymellyjewelry

Жыл бұрын

@@kouusa hmmm... peroxide & UV light? Interesting 🤔

@sierrahjmartinez6703

Жыл бұрын

Basically your toning it out. Like when you tone out brassy or yellow blesvhec hair with a cool tone hair dye or purple shampoo.

@madebymellyjewelry

Жыл бұрын

@@sierrahjmartinez6703 exactly...blue or purple cancel out yellow.

You're jewelry still looks nice with the yellowing...🤗

@madebymellyjewelry

Жыл бұрын

Thank you very much 😊

@sharisebaileyonamazon

Жыл бұрын

You're welcome 🤗

@madebymellyjewelry

10 ай бұрын

@@artdeco123 thank you ❤️

What about the JDictions brand? I did notice when the item is being cured it turns yellow but after it has cured it is completely clear, is that a good sign?

@madebymellyjewelry

Жыл бұрын

I've never tried that brand...hadn't even heard of it until people were leaving comments about it. Everyone else says it's good 😊 Thanks for watching 💗

@alexanderholden82

Жыл бұрын

the original Jdiction formula did well in my yellowing test but they're low viscosity formula did not do as well and has a slight yellow tinge. the absolute best I have found in my testing is actually let's resin UV resin.

The art Resin takes a long time to cure doesn't it? What was the brand of UV resin you used?

@madebymellyjewelry

Жыл бұрын

It takes it about 24 hrs to cure, depending on the ambient temperature. It gives a much, much nicer finish though, in my opinion, aside from the yellowing issue. The only UV resins I ever used (other than Deep Shine) are the ones from Amazon that everybody else uses. Mainly, the two pictured in the thumbnail. I don't guess they really have a brand name. I'm pretty sure that the ones that yellowed really badly were done with the bottle with the blue, green, & yellow flowers that you see everyone using. Hope that helps. If you have any more questions, please let me know. Thank you for watching 😊

This is so sad. And just a thin coat, too! I do solid epoxy resin pieces, and had considered using UV resin to achieve some special effects, or for things like wire flower petals that need to cure quickly, but I never actually did it since I always suspected this would be the case. Like, you literally CAN'T put a UV inhibitor into UV resin because it would interfere with the curing process. Just be careful with what brand of epoxy you use, some definitely have very good UV inhibitors, others, not so much. Do your research. I have heard Art Resin has a good one, though I do not like how soft/bendy it is (that may be fine for coating polymer clay though), after looking at a lot of yellowing comparison videos i settled on Let's Resin brand, for something that is hard but also yellow resistant, and have been very happy with it. But i also had good luck with Pro Marine's resin. One time, a bunch of clear resin flash cured on me in a cup and I decided to just stick the hunk of it in a window, for months, and i could detect barely any yellowing. I also made some snowflakes that i hung in a window for a month or so this winter, and they are fine.

@madebymellyjewelry

Жыл бұрын

Good info...thank you. Yes, I heard Art Resin was good with the yellowing. I watched a lot of videos with testing & it held up really well. Although, I've noticed a little bit of yellowing on some pieces I made over a year ago. Some people in the comments are saying Art Resin is one of the worst for yellowing. As we say all resin will yellow EVENTUALLY I just assumed that's why the art resin was starting to yellow a tiny bit. Im glad you mentioned the "bendy" of Art Resin. I was wondering if I was doing something wrong because I wasn't expecting that....but I really like the fact that it's flexible. The polymer clay is flexible, so they work well together. I think I'll try the Let's Resin next time since so many people in the comments have recommended both the epoxy & the UV of theirs. Thank you for watching & thank you for your comment. ❤️

@RayeGunn

Жыл бұрын

@@madebymellyjewelry I have seen some conflicting info on Art Resin, some older videos show it being an absolute champ when it comes to yellowing, other, more recent ones show it yellowing. It may be they changed their formula, or there was just a bad batch, it's hard to say. Art Resin is designed more for fluid art or for an ultra glossy varnish on paintings, hence the name. It is intended to be poured on to canvas in thin layers, so it's bendyness helps it resist cracking, which i could also see being good for polymer clay. It's just I work with resin poured into molds, so wanted something harder. But that doesn't mean bendyness isn't good in other circumstances! there are specific resin formulas for every need.

@madebymellyjewelry

Жыл бұрын

@@RayeGunn yeah, it could be that their formula has changed. Yes, using it as a topcoat like I do is very different from casting like you do. As far as I know art resin isn't used for that. I totally agree... everyone that uses resin has different needs & wants...& there are so many different formulas...there's one for all us! 😄

I’m so sorry…that would be very upsetting after all the time you put into making those beautiful pieces…I never thought of that happening…thank you for sharing with us even tho you had to go thru that to do so!!!

@madebymellyjewelry

Жыл бұрын

You are very welcome! Thank you for watching & commenting...I hope you'll consider subscribing 💗

@jennifermelvin8038

Жыл бұрын

@@madebymellyjewelry already done ✔️😉

@madebymellyjewelry

Жыл бұрын

@@jennifermelvin8038 awww, thank you 💗

You make so many gorgeous designs. I hope you can find something to work for you. 😊💖

@madebymellyjewelry

Жыл бұрын

Thank you very much. I really appreciate that. Thank you for watching & commenting ❤️

Lots of great information 😊thanks for sharing

@madebymellyjewelry

Жыл бұрын

I'm so glad it was helpful. Thank you for watching ☺️

@sherbearsclay

Жыл бұрын

@@madebymellyjewelry I love Theresa‘s UV resin too, i haven’t had too many things turn yellow like yours unfortunately did with ither resins but I’m also learning more and more about resin and which ones are good and bad, how long to cure etc. this was a great example of what can happen. I found one that cures really fast and hasn’t turned yellow I’ll have to get the name of it when I get home but definitely a great resin like the brush on one

@madebymellyjewelry

Жыл бұрын

@@sherbearsclay well, like I said for personal use, it doesn't yellow as quickly. Honestly, my personal ones that I showed in the video aren't my favs, so I don't wear them often. I have a favorite bangle & earrings that I need to sand down & redo because it yellowed....& it's even on really dark colored clay. Other than Deep Shine, the only ones I've used are the Chinese ones that everyone uses. I'm pretty sure they'd all do the same thing, though (except for the Deep Shine).

@madebymellyjewelry

Жыл бұрын

@@sherbearsclay I also get a MUCH nicer finish with epoxy than UV. I just didn't realize how bad the surface was on the UV until I used the epoxy.

@sherbearsclay

Жыл бұрын

@@madebymellyjewelry yes I did a book cover in epoxy and it still looks amazing

It is truly heartbreaking. You are right. I’ve tried two different brands of UV resin. I think I’m ready to give up and leave all the surfaces matte, and just continue using the uv resin on the back. Although the neutral colour earrings are okay, I’ve noticed it’s the lighter colours that are really effected. 😢

@madebymellyjewelry

10 ай бұрын

Yes, even my Art Resin has started to yellow. Many, many people have suggested Let's Resin in the comments. I have some of it arriving today. I've gotten to where 90% of my designs don't require sealing, or they're textured so they look better without a sealer. But sometimes, I just like the glassy look of the resin...& my customers seem to like it too. I still have no interest in using UV resin unless I need it on a curved surface. Not only because of the yellowing, but the warping from the heat, & I just get an all around better finish with an epoxy resin. If I can't find an epoxy that holds up better against yellowing, I'll just stick with designs that don't need it. I hardly ever use paints, powders, etc anyway. I generally prefer to do all my artwork with just the colored clay. Although, sometimes it's fun to use those surface treatments. Its just a catch 22, I think 🤷 Thanks for watching & commenting ❤️

@chunkyclaydeaigns

10 ай бұрын

@@madebymellyjewelry I appreciate your insight. Thank you for that.

@madebymellyjewelry

10 ай бұрын

@@chunkyclaydeaigns you're most welcome 😁

@NessiesVideos

10 ай бұрын

@@madebymellyjewelry Uhm, WHY don't you just sand and buff instead of using resin? This gives you a deep sheen and you don't have to worry about yellowing anymore ...!

@madebymellyjewelry

9 ай бұрын

@@NessiesVideos I do sand & buff sometimes.... although it isn't always possible. A lot of the pieces in the video had additives to them that needed to be sealed & couldn't be sanded. I use many different finishing methods...just depends on the piece, what's in it, & the final look I'm going for. I just wanted to focus on the issues of using UV resin in this video. Thank you so much for watching & commenting ❤️

Thank you for sharing i did not know aboutthis with uv resin

@madebymellyjewelry

11 ай бұрын

You're very welcome 😁 Hope it helps ❤️

I have a lot of polymer clay but I haven't started working with it yet cause I don't have cutters or anything I have been seen people just polish their pieces & not add resin at all. I don't know how it would make it feel if you just do that but it looks like it makes it kinda shine as if it has resin on it. I don't like the feel of unpolished resin though.

@madebymellyjewelry

Жыл бұрын

Polished & buffed polymer clay has a lovely feel to the touch. Feels extremely sooth. I also love the feeling of clay that has been sanded but not buffed...like a matte finish. It feels very velvety that way. You can achieve a very beautiful shine with sanding & buffing. I think everyone starting out should try it...at least once. It is a lot of work, though. The shine from buffing is beautiful, (especially on.clsys with mica in them) but it's not like resin. It doesn't have that depth that resin does...resin can almost make it look like your clay is under glass 😍 Thank you for watching & commenting ❤️

@chucky6367

Жыл бұрын

Use glass varnish instead, it's like resin in strength and shine but it's basically gloss varnish that's super clear and easier to apply on small jewellery pieces.

@madebymellyjewelry

Жыл бұрын

@@chucky6367 yes I use gloss varnish sometimes....just depends on the piece. Floor wax can also be used on polymer clay. My very 1st piece, (a bangle bracelet) I used floor wax & it still looks beautiful after several years 😄 Thanks for watching & commenting ❤️

We’re they all made with the same brand of UV? Some artists have no problem with yellowing. I know how disappointing it must be. That last necklace where the resin no longer matched the seed beads would be a significant problem but many others,if you didn’t see the before pics, were a very pretty bone colour. The change seems to mainly affect the white rather than the rest of the colours. Could you try a different brand of white clay or a different colourant?

@madebymellyjewelry

Жыл бұрын

Hi 👋 No, they were using different brands of UV Resin. If you could see them in person it's more prominent & also not just the white. So, I don't think the brand of clay would make a difference, really...but who knows? 😆 I also didn't use any pigments or alcohol inks & things...just clay for the most part. Some of them have metal leaf, & some have a bit of acrylic paint...but nothing that should affect the resin. Thanks for watching & commenting ❤️

It's such a shame that these pieces yellowed so quickly. They were all beautifully designed, so it would be a lot of time and effort out the window! I actually liked the matt pieces more. Good luck with finding the right resin that won't yellow as quickly. All you can do is continue testing, until you find the right one for the job!

@madebymellyjewelry

Жыл бұрын

Thank you so much. I'm glad you like my work 😁 Thanks for watching & commenting ❤️

I've never experienced that in the two years I was doing outdoor events in the direct sunlight with clear items made from uv resin. Maybe it was just the brand I was using.

@madebymellyjewelry

7 ай бұрын

Wow! Thats really surprising! It had to be the resin you were using. Even so, it will yellow eventually. Any resin will...just the nature of it. I'm so glad yours worked well form you! I tell you, it's so disappointing to have this happen. Thank you so much for watching & for taking the time to comment. I hope you'll subscribe & stick around for a while 😁❤

@yingqingtang4128

4 ай бұрын

It sounds great that your products are not get yellowing. Can you share what brand of uv resin you used?😊

Some of the white going what I would call bone or antic white. Again if someone e didn't know the original vs the yellowed, the pieces still look nice. Something changing from cool bubble gum pink to a peach orange is ok if orange is your color. I still think that most of them are different but still nice.😊

@madebymellyjewelry

Жыл бұрын

Thank you ❤️

Oh Hun let me save you the time n headache of fighting with your resin... I started with Art resin and I was paying the $400 for 2 gallons every like 6 months because I do resin pieces not clay. I had so many of my pieces yellow. I thought maybe because I liked alcohol inks that were green blue n purple that did it. So I incased some pictures n other items in clear. I made a memorial piece of my sister that passed. Everything yellowed. So I did research on KZread because I don't want people tell me what's good (sponsorships) I wanted to see it for myself. The let's resin is the most clear. Since I switched everything has been so much better. I buy the two part epoxy resin. It's thinner also so less fighting to stir it up. (I make larger batches) it's clear, less bubbles, it stays clear for longer. I haven't had nothing turn yellow since. I'll admit I haven't had nothing in direct sunlight because I had no reason to but I had things in windows n haven't had no problems. It's also cheaper than art resin so you can buy a small batch n put it over so white baked polymer clay n test it before you use it in pieces you put all that effort into. I'm not one to just go with the flow cuz people say but since I bought it I have truly seen a huge difference first hand. I believed art resin at first n bought it because they said it's safe to use, it's food safe, it's non yellowing etc but I've lost a lot due to yellowing n tbh it's not safe to be around it gave me splitting headaches mixing so I had to get a respirator to use it too so that's 2 out of three I found to not be true. You're welcome to continue to do what you want but I thought I'd save you from the headache n hassle. There's a KZreadr that shows testing done n I'll link it too kzread.info/dash/bejne/X6uHwdmDZtPcgJM.htmlsi=6S_FV3ARD2vnRpd0 I hope this helps...

@madebymellyjewelry

11 ай бұрын

Yes, SO many people have recommended Let's Resin & Jdiction. I'm going to try those next. Some of my pieces with Art Resin are starting to yellow the tiniest bit. Thanks for watching & thanks for commenting ❤️

@spoiledwitch82

11 ай бұрын

@@madebymellyjewelry it's not a problem... I just know how heart broken I was when I believed it wasn't gonna yellow n I don't know bout you but when I remake a piece I never get it the same so I was really sad to throw out so many of my pieces. Not all but alot. Id rather help someone so they don't have the same problem. To me there's nothing more devastating than to be proud of your work n to have it ruined. I don't work with clay I learned about it because I wanted too n mine gets too soft to fiddle with. But I do work with different resins now so I just really wanted to help because I know the feeling. I heard good about Jdiction as well but I think that's a UK thing n I'm in America. Whatever you choose good luck I wish you well. I've made jewelry too n I really like your pieces too as one jewelry maker to another...

@madebymellyjewelry

11 ай бұрын

@@spoiledwitch82 thank you 😀

So the DeepShine UV Resin from TinyPandora doesn't yellow? Did you test it?

@madebymellyjewelry

5 ай бұрын

👋 The Deep Shine is guaranteed not to yellow & I sincerely trust Teressa Salgado. If she says it doesn't...I definitely take her at her word. Nothing I've used it on has yellowed so far. However, I still haven't done an actual test, where I put it on white clay & set it out in the sun for a few weeks or months. A lot of people say that UV resin from JDiction & Let's Resin don't yellow, but personally I've never tried them 😊 Thanks for watching & commenting ❤️

@NessiesVideos

5 ай бұрын

@@madebymellyjewelry Thanks for the quick answer! Since I'm in Europe, I'd like to wait until Deep Shine is to be proven not to yellow over long time in the sun, before I buy it from that far away ...

@madebymellyjewelry

5 ай бұрын

@NessiesVideos you're welcome...& yes, I understand, I'd probably want to wait too 😉😍

I don't mind it on the blue ones ,it makes them look even more like real turquoise.I get your point though - it must be very frustrating!

@madebymellyjewelry

Жыл бұрын

I wouldn't mind it on the blue ones AS MUCH, if it weren't for the fact that you can see the original color around the edge of the pieces. Yes, it was extremely frustrating! Thank you for watching & for your comment 💗

Beautiful work. I only put uv resin on earring backs. I dislike Just resin it not only yellows it pulls away from sides.😢

@madebymellyjewelry

Жыл бұрын

Thank you. Yeah, as my skills & quality of my work have progressed...Ive gotten away from designs that need resin more & more. I do like the look of resin (2 part) but I want my customers to be able to wear my pieces for years & years. So, I've been doing more sculpted work, & just more clay only designs. Thanks for watching & commenting❤️

Thank you for making this video..I was gonna try some uv resin but I will go ahead and stick with my normal resin I might have to wait overnight but at least it doesn't yellow. It would suck to waste so much time making things and then that happening. sorry it happened to you.

@madebymellyjewelry

Жыл бұрын

You are very welcome! So glad I helped. What 2 part resin do you use? Art Resin is the only one I've tried so far, but I wouldn't mind experimenting with others. One good thing I've noticed about Art Resin is that is actually stays a bit flexible, so it works great with the flexibility of the clay.

@terryo1463

Жыл бұрын

@@madebymellyjewelry I use JDiction. I really like it.

Any resin left out in sunlight will yellow very quickly, unfortunately... Makes no difference what the brand is, being in strong sunlight continuously like that only accelerates the process. I even tell my clients if they're eg going to a wedding, to watch the amount of time they're in sunlight while wearing (non-UV) resined jewellery. For that reason, outdoor fairs/stalls for any resined work - jewellery or art - is a no-no, I'm afraid. I'm so sorry your lovely stock got ruined. With older art pieces of mine that have deteriorated/yellowed, I run a light flood-coat tinted lilac over the top, which definitely helps. 💜

@madebymellyjewelry

Жыл бұрын

Thank you 😊

From what I understand, uv resin yellows over time, that's unfortunate, but the same problem happens with normal resin too... Some of my pieces yellowed over time and others didn't.. .I use Gedeo.

@madebymellyjewelry

4 ай бұрын

Yes, Absolutely! Happens with ANY resin eventually. UV resins just tend to yellow sooner because of the UV activators needed to cure them. Unfortunately, it's just one of those things...there's always good with bad 🫤 Thanks for watching 😊

@Lotusflower970

23 күн бұрын

@@madebymellyjewelry how long before yellowing on uv resin jewelry

@madebymellyjewelry

23 күн бұрын

@@Lotusflower970 hi 👋 Thanks for watching & commenting! So, it honestly just depends on the brand of resin & how much sun exposure it has. Like I said I had some pieces that yellowed pretty badly in just 1 or 2 days...but I had them outdoors at art shows. It wouldn't happen that quickly in just normal everyday use. However it will happen eventually. There's really no way to know the exact amount of time. So many factors determine that, such as brand, how much sun exposure, thickness, etc. I think even the temperature in which it's stored can factor into the yellowing. I wish I had a definitive answer, but unfortunately the best I can do is...it can happen in a few days, or it may take years 🫤

What can we use ?

@NessiesVideos

10 ай бұрын

Sand and buff. It's that simple.

New Sub Here! Love your channel! May I ask what UV Resin you use that turned yellow? I am new to all of this and started using JDiction UV Resin.

@madebymellyjewelry

11 ай бұрын

Hi 👋 I'm so happy you subscribed!!! The resins I used were just the Chinese ones from Amazon that a lot of people use. Two of them are pictured on the thumbnail, but there's also a couple of more that I used. I've never tried Jdiction...but a LOT of people in the comments have recommended it....along with the Let's Resin brand ❤️

@madebymellyjewelry

11 ай бұрын

If needed, you can message me on FB & I'll send you links for all of the ones I've ordered from Amazon.

@ReneeB5

11 ай бұрын

@@madebymellyjewelry thank you! I’ll pull you up on FB! 🩷

I wonder, is there possibility to use two part epoxy resin for coating 3D objects such as flowers when working in thin layers?

@madebymellyjewelry

14 күн бұрын

@@sabinalutterova1520 hi 👋 Ya know, that's a good question, but I don't think you could. I just won't set up quickly enough & I think most of it would just run off even if it's in really thin layers. Ive never tried it though, so I can't say for sure. I just resin as an accent for my polymer clay, which is my primary art medium. Some of the actual resin artists might have tried this, but I don't know. It would be a cool experiment for sure! 😃

@leetau8429

3 сағат бұрын

im using uv nail gel on my 3d flowers in thin coats, only problem is an even cure like i need to turn my flowers in all directions and it takes a long time, literally a couple of hours!! i only have a small uv nail lamp atm though.

If you don't compare the 'damaged ones' to the rest of the original collection, they're still very beautiful and just a different colour.

@madebymellyjewelry

5 ай бұрын

Thank you! I appreciate that ❤️

I can't tell you how helpful this was for me. I haven't used resin yet but have always wanted to and have a uv lamp ready to go but want to avoid major mistakes. I think i will try the Let's Resin brand and buy some more Flecto Varathane as an alternative which i have used in the past. Also is there a brand of gel polish you could recommend? I am unfamiliar with nail products. And some ppl use Kato liquid as a finish but I'm unclear as to whether that's a special product or just her transparent liquid. Do you know anything about that? Again thank you so very much for all your work making these tutes 👍👏✌️🫶😊

@madebymellyjewelry

5 ай бұрын

I want to try out the Let's Resin UV too. As far as gel polish brands...no. I have lots of different ones & have no idea which one I used on those beads. It's one of those things we'd just have to test out & see which ones work. Really though, gel top coat is probably a lot more expensive than UV resin...it's such a small amount. Kato liquid...yes, it's just the regular Kato clear liquid clay. I've tried it. I'm not a fan. That's just personal preference. It's finicky & it doesn't seem very durable to me as a finish. It seems to dent & scratch easily, but that could just be user error. I much prefer texture, sanding & buffing, or resin. I feel like I didn't help much here 😂 You can always comment or just message me if you have more questions 😃 Thanks for watching & commenting ❤️

@sweetpealee056

5 ай бұрын

@madebymellyjewelry you've helped a lot! Don't sell yourself short...I too prefer sanding and buffing to a glass like shine but some things I just can't sand, like certain leafing applications etc. Which Is why I was wanting to try resin. All the other artists seem to rave about the let's resin brand over all others so I'll give it a go. Btw, been claying since the early 90s, I remember using Future floor wax as a finish, which worked great unless it got wet, then would turn a milky white on the surface of your clay! Lol

@madebymellyjewelry

5 ай бұрын

@sweetpealee056 I use the floor wax sometimes too!

@sweetpealee056

5 ай бұрын

@@madebymellyjewelry I still have a bottle! A little goes a long way! 😂

@leetau8429

3 сағат бұрын

i dont like the yellowing either so am using depend iq uv nail gel. so far no probs apart from curing 3d pieces. i am in new zealand though but purchased the gel from the farmers if you have that dept store where you are

this could be the dye in the clay, it looks like alcohol inks fading. Again, JDictions I have no problem with and I just finished a show where all my UV resin was sitting directly in sun. also, there are a lot of 2part resins out there that do the same thing. Also, one other thing to check for, UV you can't but 2 part you can, a resin that has been sitting on the shelf or had fluctuations in temp will yellow immediately.

@madebymellyjewelry

Жыл бұрын

No, I didn't use alcohol inks on any of them. They're all clay... except for the very last piece that has a bit of acrylic paint. I didn't even own alcohol inks at that time...now, I've had them a long time & still haven't used them. 😂 A lot of people have mentioned the Jdiction brand, but I haven't tried it. Still, it will yellow eventually...it just may take it a really long time. Any resin will....that's just resin. I love the way the resin looks, but I'm trying not to use it unless I actually need it. Most of the pieces in the video didn't actually need it...I just used it because I liked the look. Thanks for watching 💗

I had no idea that could happen if they sit in light.. How sad to lose your pieces like that :( I use nail rhinestone uv glue to glue the earring posts on.. I figured if it is meant to hold a crystal while washing dishes for a month then it would work for holding the posts better than e6000..

@madebymellyjewelry

10 ай бұрын

I personally never trust glue alone for my post (e6000 or otherwise)...but there again mine aren't just for personal use. I may do a video one do all about ways to attach posts & do experiments to see which way is the strongest. Thank you for watching & commenting ❤️

@appleoneill5135

10 ай бұрын

​@@madebymellyjewelryThat would be great and very useful. Great info, thank you so much for sharing it x

@madebymellyjewelry

10 ай бұрын

@@appleoneill5135 you're very welcome 😁

Wow, so many artist use so resin on so many projects. Yet, you are the first to talk about this issue. I have uv resin on the shelf but never used it because I am always afraid of doing something wrong and ruining my piece. Now, I may not Ever use it. Thanks for sharing, Melly. I'm sorry this happened to you.

@madebymellyjewelry

7 ай бұрын

Well Wendy, you don't have to be afraid to use it...it just all depends on what you're using it for. I think it probably somewhat depends on the brand, too. I don't know...I just wanted people to see what CAN happen. Any resin will yellow over time...just some do it faster than others. I've gotten to where I just generally try to not use additives that require sealing. If I do need to seal a project, I will try to use a different type of sealer. Sometimes though, I just like that glassy look that resin gives...in that case I use an epoxy resin. As with most things in life, you have to take the good & the bad. 🫤 Thanks for watching 😘

@Wendy-WackyWomanCreations

7 ай бұрын

​@@madebymellyjewelry I use Kato clear liquid a lot. I like that look more than resin most of the time anyway.

I've been using the non toxic food Grade resin.yes that's the one I use!! 😅

@madebymellyjewelry

Жыл бұрын

Thanks 👍

2 part resin reacts badly over time with polymer clay. After a few months, it breaks down and the piece becomes sticky

@madebymellyjewelry

Жыл бұрын

Did this actually happen to you? I'm wondering if the resin wasn't mixed properly? Or if someone just told you this, perhaps they were misinformed? LOTS of people have used epoxy with polymer clay for years with no problems. I have pieces that I coated with the Art Resin epoxy & they're well over a year old. So, it didn't happen with my resin. Please let me know if you have experienced this first hand, & if so, what resin you used. Thank you for watching & commenting ❤️

So what can one use? 😮

@madebymellyjewelry

10 ай бұрын

Well, there's several things you can use instead. It all depends on the look you're going for. For the same look, a 2 part epoxy resin can be used. Liquid polymer clay can look similar to resin. Water based varnishes can be used, like varathane. There are special varnishes for polymer clay made by the clay companies. Renaissance Wax is another good choice. One more thing that I know of is floor wax. Like Pledge Revive It. The only thing with it is that you have to be careful with isopropyl alcohol...it will remove the floor wax. Thanks for watching & commenting ❤️

@Jade_902

10 ай бұрын

@@madebymellyjewelry thank you so much for that information. Have a good day.

@madebymellyjewelry

10 ай бұрын

@@Jade_902 you're very welcome 🤗 & you too

This is exactly why I am watching. Some of my earrings have started to yellow.

@madebymellyjewelry

10 ай бұрын

And it's so discouraging after putting in all that work 😭 I'm so sorry. That's exactly why I wanted to make this video...to hopefully keep someone else from making the same mistake & ruining their hard work. 😭😭😭

Wow! This video got 18k! That's awesome! And thanks for the mention you gave me a week ago! ❤

@madebymellyjewelry

10 ай бұрын

I know...I can NOT believe this video has that many views...I have NO IDEA how that happened 😂 & you're very welcome 😁

@frugallydelicious

10 ай бұрын

@@madebymellyjewelry Lol. I hear ya! I was going to ask your secret. 🤪 I've been on KZread for three years, I've had three different channels, and I've never had a video get that many views. Lol. KZread! I don't anyone will ever figure out their algorithms. So did that video make it possible for you to get partnered with KZread? 🙏

@madebymellyjewelry

10 ай бұрын

@@frugallydelicious yeah, I just don't know how it happened. One thing that came from it is that my subscribers went from about 40..or maybe it was 80...to almost 500! Yay!!! Partnered? I don't know what that means 😂 is it the same as being monetized? If so, then no. I don't have enough subscribers or watch hours 🫤

@madebymellyjewelry

10 ай бұрын

It's funny, most of my other videos only have around 200 views...this one has almost 19K 🤷🤷🤷🤣🤣🤣

@madebymellyjewelry

10 ай бұрын

​@@frugallydeliciousI've got a LOT to learn about YT. I still have no idea what I'm doing 😂 It seems like (if I'm looking at the analytics right) that most of the views only watch the first few minutes of my videos 🤷 I don't know. I feel like I also need to get a computer. Right now, I do EVERYTHING on my phone. I do enjoy making the videos though. I really like the editing. I don't know why. I'll be SO GLAD when my hand is healed up & I'm out of this STUPID brace so I can actually do stuff. Of course now, the Fall art show season has started back, so I'll be busy with that. I had planned to get more consistent with my videos & I had a schedule worked out...then I broke my hand so...🥴

I’m so sick of getting sticky UV resin that doesn’t cure well…. Or make things to find them a murky yellow just months later. No more UV resin for me either! Only Jdiction for me.

@madebymellyjewelry

Жыл бұрын

YES!!!! Everyone uses UV like it's the greatest thing ever...it's NOT. I think a lot of people start out using UV resin just because it seems easier & less intimidating than an epoxy...that's why I started with UV, anyway. So...tell me....what is this Jdiction you speak of???? Thanks for watching & commenting...I'll hope you'll subscribe ❤️

@madebymellyjewelry

Жыл бұрын

Ok, so I see that Jdiction is a brand of resin. Ive never heard of it. I'm assuming you use their 2 part epoxy? I'm definitely going to watch some videos on it, & i may try that one. How long have you used it? Have you had any yellowing yet at all? Thanks for mentioning it 😉

@Linda-yz8ss

Жыл бұрын

Jdiction does a UV resin and I have no troubles with it at all, for curing, For curing problems, UV has to be cured on the front and the back in transparent molds, and don't touch for 5 min or so! hope that helps. and the only yellowing I get is from cheaper UV resin, never JDiction. Their high viscosity is the best I have ever used. My stuff sits in the sun at shows.

@alexanderholden82

Жыл бұрын

Many people don't realize that a lot of UV resin is depending on the wattage of the lamp that are using, many of the Brand's out today require at least 36 w. It also requires using clear or transparent bold and curing on both sides before diemolding and also working very small thin layer... Many people approach using UV resin like epoxy and try to for thicker quarter inch pieces and often wonder why it doesn't are well and warps. Let's resin and JDiction both make outstanding Cuvee resins make outstanding UV resin that yours nicely and will not yellow quickly.

also be careful on what type of color you are using, like alcohol ink i only use lets resin or octopus inks. could be a combo of things.

@madebymellyjewelry

Жыл бұрын

All the colors in the examples were just the colors of the clay. Some of them had a tiny bit of acrylic paint, but none of them had alcohol inks or any type of pigments. 😁

I would be so upset as well. Your work is exceptional, though

@madebymellyjewelry

Жыл бұрын

Thank you so very much 😊💗

What resin was you using so I don’t buy it

@madebymellyjewelry

Жыл бұрын

I have used different resins, but mainly the two that are pictured in the thumbnail. I don't know that they really have a brand name. Just the Chinese resin from Amazon. One for sure, is the bottle with blue, green, & yellow little flowers that you see SO MANY polymer clay artist using. That's the one that yellowed the worst for me.

I hate UV resin, I have bought many brands and they don't totally cure, so I had to back to epoxy resin

@madebymellyjewelry

8 ай бұрын

I feel ya! I get a much better finish with epoxy resin anyway. Of course, it will yellow too...just not a quickly. Thank you for watching & for taking the time to comment ❤️

I’m sure that was so frustrating, but i can’t be the only one who likes the yellowed pieces more than the non yellowed can i? 😂 feel free to donate them all to me. I’m a worthy cause. Beautiful work!

@madebymellyjewelry

6 ай бұрын

Oh, my gosh...your comment made me laugh so hard 😂 I tell you what...I'll look & see if I still have any of them (I'm sure I do). Send me a message on FB or IG ...you might can even message me here? IDK. Anyway send me a message & I'll hook you up! (If you live in the US...if not, we'll see if we can work something out) Thank you for watching & commenting ❤️

@momzillainnova

6 ай бұрын

@@madebymellyjewelry omg you are an amazing human!! I’m in Virginia and just started my craft hopping during the pandemic. Resin is where i landed after basically buying an entire michaels store and putting it in my tiny craft room but i have merged with clay and I might just be in a long term Relationship now! (Probably just jinxed myself and some new hot bead box or acrylic palette will wink at me and make me eat my words..but I’m trying to settle down!)😂 I’ll find you on Facebook. Thank you for making my day. :-). I was just watching and thinking “maybe I’m crazy (likely) but I’d buy every yellowed piece at your table! You do beautiful work and your color choices are really fun and current to what is on style and trend. I see some Lily P influence maybe? Going to go find you and see if you might just also be a southern girl. Xoxo!

@madebymellyjewelry

6 ай бұрын

@@momzillainnova girl, I'm so out of touch, I have no idea who Lily P is 🤣🤣🤣 I'll Google it 🤪 Yes, I'm a Georgia girl. I did a LOT of different things before finding pc too. I fell in love. I still do other things...some more often than others...but turning my pc into a business (which was my plan from the start) takes up most of my time. I don't get to do my other art forms very often, but I'm ok with that. It's worth it to me 😍

@momzillainnova

6 ай бұрын

@@madebymellyjewelry sorry i was auto corrected weirdly. Lilly Pulitzer was what I typed. I guess they wanted her to have a cute little Nick name. 😂😂

@madebymellyjewelry

6 ай бұрын

@slottygirl70 yeah, I Google it & that's the name that came up. Still...I'd never heard of her before. I can see why you thought that of that as an influence, though.

Beautiful clay work tho!

@madebymellyjewelry

Жыл бұрын

Thank you 😁 And thanks for watching 💗

2 party resin you should do in your house and you need a shortcuts mask as the fumes are toxic. Please look up 2 part resin safety.

@madebymellyjewelry

Жыл бұрын

I do know how to use it safely 💗 Not to be rude, but I don't understand why you think I don't know the safety precautions, or that I haven't done my research.

is it not funny I can have traduc in français and i not can understant

@madebymellyjewelry

Жыл бұрын

😢😢😢

Tree trunks.... Is that you?

@madebymellyjewelry

Жыл бұрын

Ummm...no. Not me 😂😂😂

@muddy6932

Жыл бұрын

@@madebymellyjewelry you could certainly be the backup voiceover!

@madebymellyjewelry

Жыл бұрын

@@muddy6932 😂 so who is tree trunks????

@muddy6932

Жыл бұрын

@@madebymellyjewelry just a sassy character from one of the best shows of all time, KZread can answer that best 😊

@madebymellyjewelry

Жыл бұрын

@@muddy6932 ohhhh...I looked it up...I watched...I listened....I get it now 🤣🤣🤣🤣

The whole RESIN discussion should start with one critical question. Knowing you're only going to use this thing you made for a certain amount of time, how much longer would it sit in a landfill before going back to the Earth? Or ask yourself, with 144 tons of new plastic waste being produced in the USA every year, just how much of that land-fill space do you want to waste on hobbies? 😢😢😢. Your grandkids are the ones who will be dealing with the plastic or 'resin' 'polymer ANYTHING'; PROBLEM. It will be your families problem, not mine. Plastic is here forever, once you mix it up. 😢😢😢

@madebymellyjewelry

Жыл бұрын

I make & design quality jewelry pieces that will last my customers MANY, MANY years. What I do is not a "HOBBY". What I do is art, and it's a business. That art & business are how I make my living. This video was not about landfills, waste, etc. This video was intended to educate other artist & hobbyist what can happen with some UV resins that MANY people use. Last but not least...it will NOT be my grandchildren's, nor their grandchildren's "problem" because they don't & will never exist, because I was never able to have children....so thanks very much for insulting my art & then stabbing a knife in a sore spot. Go find someone else to insult!

@justkerry173

Жыл бұрын

​@@madebymellyjewelrybeautifully put!

@crystalb5151

Жыл бұрын

Go jump in a landfill @mawi1172

@madebymellyjewelry

Жыл бұрын

@@justkerry173 Why, thank you very much. Some people prefer to delete those types of comments, but I'm too sassy for that...I'm gonna give them a piece of mind! 😂

@maiaallman4635

Жыл бұрын

I think the idea is that your grandchildren will continue to use the jewellery as jewellery and then nothing will be going to landfill.