As an actual (non-music) engineer with a large studio, I can explain "latency", but there's no simple explanation. Anyone who says "hardware/analog only has no latency" is also theoretically incorrect, since everything takes some amount of time. Sound through air is relatively slow and audio through cables is limited to under the speed of light, which means although orders of magnitude smaller, there is still "latency" with everything. However in the case of sync, I think "jitter" is a bigger problem itself than latency. The "real problem" comes down to modern computers absolutely suck for doing anything requiring precise timing. They may be hundreds of thousands (far more?) of times faster than an MPC or Atari ST, but the way they are built and designed they are not able to accurately send out a MIDI pulse at a fixed time. I guess a simplified way to put it, is in the case of an Atari ST or an MPC, the "software" has complete control over the CPU. It is doing nothing else. The MIDI in also has a direct interrupt to the CPU. The second an event is received (or, based on the clock, which again has full control over the and the timing of everything) the "program" is interrupted/transmits immediately, and instantly handles the event. The reason it can do this is more or less because it only has to and only does ONE thing, run a sequencer. Modern computers are quite far from real time. You have multiple cores now, running thousands of threads, splitting the CPU time between sources, and also requiring synchronization. You have a bunch of devices over the PCIe link (like USB controllers or MIDI cards), which are NOT truly synchronous (Cubase ASKS for a note to be transmitted, which is then queued, and transferred in a burst, eventually to the device - it is not sent directly to hardware immediately). It is almost the same concept as why we have "audio buffers" - audio is not being transmitted in "real time". The interface is reading 44100 values a second to its output. Cubase promises to deliver the next 128 samples before it has run out of new samples to read. Those 128 samples are processed as a chunk and then queued to be sent out. This is why if you set your buffers too low you get dropouts - the computer isn't able to process the chunk 64 samples and get it to the hardware before it runs out of samples to read. You can consider modern computer MIDI "chunked" too, Cubase is constantly asking the notes to be sent - which goes through a long and non-synchronous process before it actually makes it to the device that should be sending it. Sometimes it takes more, sometimes it takes less time - but since it can't be "buffered" and sent BEFORE the device needs it, it has to be "real time", which it just can't do well. This is why jitter is a bigger problem for modern computers - the CPU is busy with something else? Your clock pulse gets delayed by 2 ms until it's free. This is how solutions like the E-RM and InnerClock generate a stable clock pulse from the audio out - the audio out is precomputed and buffered, and will always end up being sent at a constant rate by the interface. MIDI "can't be" (MOTU "tried", it should possible but not simple, and would require a tightly integrated hardware+software solution, which I guess no company has ever felt the need to hugely invest in). In the case of older gear, yes, everything in existence still has latency, which can be more or less depending on how well it's designed. When the MPC receives a MIDI signal, even though the CPU is interrupted immediately and it is handled immediately, it still takes a fixed amount of time for the CPU to decide what to do with it, and a fixed amount of time for the unit to start triggering a sample to be played. Usually older units don't suffer as badly from "jitter" for that reason - they're designed in one way for one thing and therefore that one thing often takes a constant time. They're not busy handling hundreds of background tasks before processing the event. However, the fact remains (again, depending on how well its designed), if the CPU is busy handling the playback of multiple other sounds, it's possible that something gets briefly interrupted (i.e. jitter). But, unlike a modern PC, when the entire hardware is dedicated one task, that can be controlled through design - unlike a PC, where you end up with whatever combination of everything in the system ends up interacting with each other (yes, one really shitty device could affect the timing of everything else, which is why back in the day it was wise to use a DPC spike tool if you couldn't set buffers low enough - bad WiFi drivers could be eating up lots of "time" delaying the audio from reaching the interface fast enough). In conclusion, PCs suck for accurate timing/music *because* they're so much more complex and advanced. Older music things have MIDI directly wired into their CPU. Also, like some people already said re chaining MIDI devices - DON'T do it. Each device will introduce more and more latency and each device will be more and more "off" until the one at the end of the chain is pretty far from correct. Just get a MIDI patchbay - I have a 16 in 20 out. They will transmit MIDI from one channel to all 20 others with only a very tiny (comparatively) amount of fixed latency. I have pretty much everything in my studio on it, mostly so I can easily toggle between my synths getting the keyboard out directly, the MPC out, or the PC out. I even "try" to keep each synth on a different MPC out since multiple MIDI channels will cause latency against each other (with a patchbay, it's just pushing a button to change the routing). That is exactly why the "professional" MPCs have 4 MIDI outs. If I remember correctly, MIDI is capable of transmitting 1 event per millisecond - which means if you are using all 16 channels, and each channel is playing a note at the same time, the 16th channel will have 15ms delay between the 1st channel. This is why you'd want to evenly distribute parts between the outputs.

@OlehSobolev

2 жыл бұрын

jesus christ man, this was such a good piece of information

@csdstudio78

2 жыл бұрын

Yeah, long read but spot on. The best we can do is run a dedicated machine with as few services and apps, use latencymon to verify real-time capabilities, and hope for the best.

@csdstudio78

2 жыл бұрын

Yeah, long read but spot on. The best we can do is run a dedicated machine with as few services and apps, use latencymon to verify real-time capabilities, and hope for the best.

@henrydorling8

Жыл бұрын

Amazing, thanks for laying this out so clearly

@VNDM-MUSIC

Жыл бұрын

excellent read.

Thanks for being honest about your sync issues. People have made me feel stupid for years because I have so many devices that each have different latencies and I can never figure out how to get them all to sync correctly - Ive always wondered why my setup is continually frustrating me and everyone else’s seems to work flawlessly. The usual explanation is “it must be your DAW...” and it usually is! I’ve been looking for a no BS master clock and I’ll give this a try. As of now, I’ve been going one on one device by device because I don’t trust my computer to do anything properly even with my current midi interface.

@AnalogKitchen

4 жыл бұрын

Brother, we've all been there. Let me guess, if yer like me, you've even tried multiple brands of expensive cables and various lengths as well. Zee Zjermans have done it once more with this secret weapon. And... It has a few more tricks up it's sleeve besides what it's known for as well..

@hazegreen1896

4 жыл бұрын

A lot of people dont believe or cant hear this type of midi jitter/latency but its def real. I use a similar system that iv been using for about 10 years and it was life changing in the studio with lots of midi gear/chains. Mine is the Sync gen but its the same type of concept and there are some other similar solutions. expensive but worth it if you need this type of workflow.

@RickyTinez

4 жыл бұрын

I will say for a long time it never really “bothered me” but then I heard a really stable clock signal when making music with just an MPC as the master clock going to a few things. I’ve basically been chasing that but with a DAW. Once you hear it it’s hard to go back

@awkwardtom

4 жыл бұрын

If you can make do with just 1 midi clock (or use a thru device) then check out the expert sleepers usamo. Same tech as the erm multiclock and just as stable ALOT cheaper tho 🤔

“I’m not a scientist, I’m just a regular nerd.” 🤣

you can configure the output of the multiclock plugin as an External Audio Effect to exclude it from the soloing behavior

@Sharon-music

4 жыл бұрын

Awesome.

@RickyTinez

4 жыл бұрын

this is why i love the comment section! thank you soooo much for this.

@MuslimShortanov

4 жыл бұрын

Cool tip ! Thanks 🙏🏼

@AnalogKitchen

4 жыл бұрын

Weworktomorrow also there is a trigger pulse signal that you can download from their site if you want to trigger your modular

@lameaim

4 жыл бұрын

Yuuup, internets put me onto this tip as well and was just about to post. Saves a whole lot of grief.

Latency is such a fluid issue, it’s almost always a problem and the source can always change. It is infuriating and a real inspiration killer a lot of the time. My main achievement within quarantine has been building an Ableton template that is all in sync, finally got there and I can sleep at night now.

I enjoy your content. It’s nice to see you drilling into a subject with such granularity. There’s nothing more frustrating than to sit through or scan a ‘how to’ video, only to discover it’s mostly general info but without the how/why’s, which always leaves more questions than answers. 🙏

Man I am **so** glad I'm not the only one who spends a crazy amount of time checking every transient while I'm editing because I don't trust my settings.

@LukezyM

4 жыл бұрын

Trust your ears not your eyes. If it sounds good it’s ok.

Hey Ricky! Found ur channel a month ago and I’ve watched like a 100 vids. U have helped me so much, inspired me. I don’t even have analog synths and just started getting into music production. Just wanted to say thanks for everything. Keep it going :)

One of the best purchases I’ve made for my hybrid setup. Solved so many timing issues that were coming from the computer’s latency.

I will never have enough thanks to give to you for the tip of delaying the e-rm plugin track. I've had the multiclock for years now and only today I realized this would work wonders for me. Thank you a million times will still not be enough!

Hey Ricky, just want to let you know I love your content. Your videos are nerdy as hell and I love how educational they are. Its awesome to see all the intricacies of a hybrid setup that ill probably never have the money or time to set up myself. Keep it up man, your videos make my day.

@RickyTinez

4 жыл бұрын

Thank you for the kind words!! it means a lot, and im glad you relate to the nerdy side of things haha

wow thanks for making this clear. its the first time I've actually understood what the hell the ERM clock is actually doing and how it would possibly fit into my setup. TBH the latency thing is one of the things I find very discouraging about working with outboard hardware. I am primarily working ITB, but with a tool like this maybe I will be less hesitant to invest in more hardware in the future.. great vid, as always. TY!

Awesome video as always. I use the SND ACME-4 similar to Multiclock but i went with the SND because of the swing and division on switches. Very hands on but both are good options. Keep up the good work ur doing. Loving it!

You're diverse man. I was just watching your pocket operator tutorials and ran into some latency setting up my minilab 3 within Reason just now. Big thumbs ups for these videos and the knowledge. I appreciate it.

Another case of GREAT timing on topics. I have a need for this exact type device. To finally complete the hybrid fusion in my studio. Definitely relate to the MIDI chains with my MV-Modules setup. I'll have to take a serious look at the ERM. Keep up the great work bro!!! Peace...Netm8kr

Ricky, you are the man. Pleasure to meet you at NAMM this year. Stay safe and stay blessed

By far best tutorial and walk-through/review channel for hardware peeps. Thank you once again for a very informative video looking forward to the next

DUDE!! Thank you!! This is what I have been looking for too. In short, I am sending midi to DMX to control my pixel LEDs along with controlling 4 synths. It’s been maddening to get all to sync perfectly. I’ve seen the ERM, but like you had sticker shock. I am going to buy now! Seriously bro, thank you! Love your videos.

you rock! no one gets into detail on these much needed topics like you. thanks!

Why do I love this channel so much, especially when I use complete different gear and rig.

@_0O0O0O0_

4 жыл бұрын

Because of his attitude. He's not the "HEY THIS IS JASPER COMING AT YOU ONCE AGAIN WITH ANOTHER QUICK TIP TO ROCK. YOUR. WORLD!"

@trusto1016

4 жыл бұрын

Haha right!! Exactly, plus we all carry the same addiction too.

I didn't understand a word, but I'm glad you know what you're doing

This video is exactly what I needed! thank you I've got an E-RM multi clock but I thought the learning curve was a bit steep as I'm new to MIDI. I got stalled on there not being a 4/4 option. 6:23 MIDI router description was very helpful. 11:34 great explanation of why the audio signal input in port 1 15:00 sounds like unipolar vs bipolar (on Moog gear) 18:00 I think the shuffle mode is for live performance stay safe 😃

For the solo problem: Someone has probably mentioned it already, but if no one has: you can put a track in ‘solo safe’ mode, that way it won’t mute when any solo is pushed. Control-Click on the Solo button of the channel you want to put in Solo Safe.

@RickyTinez

4 жыл бұрын

You are amazing. Thank you to you and anyone else with the suggestion!

Been using it for about 4 years already. It's been a live saver in my setup syncing up al generations of Midi gear. :)

@REOvolt

4 жыл бұрын

Me too. Can’t do without.

@FuZZbaLLbee

4 жыл бұрын

What about modern MIDI gear with USB, do those have latency as well?

@StayFreshMyFriends

2 жыл бұрын

@@FuZZbaLLbee hell yes they do. I got a midi fighter twister and it has hella jitter just by itself

Ricky - I just learned to love that thing without owning it. You're doing a fantastic job with anything on your channel, keep it up bro. Unfortunately, I'm a bit too far to come to experience you playing live but I can get to your music and support you digitally. I'm definitely going to get an E-RM as I've got a similar hardware shh...stuff situation going on in my studio. Cheers sir, keep it up!

Hi man! 😜 Great video as usual! I’ve had mine for several years now, and I’ve been preaching how good it is since the moment I set it up. Like you my ever growing hybrid studio has put me through the mill time and time again, but hay it’s taught me more about midi diagnostics than I ever would of done, so there’s that! 😂 Seriously though I totally agree with the price point, as it’s the most important piece of gear I own. Tried several scenarios, but settled on usb from Live to the Deluge, then dyn midi onto the Multiclock, then onto a Kenton midi thru 25, and out from there to everything apart from my 3 main synths. That lets me run the entire studio with midi from the DAW, midi controllers or the Deluge, and gives me transport control over the drums, Hydra, Iridium and Pro3, and more importantly, transport and sync control over their individual arps and internal sequencers, which is where the main delay issues seem come from in my experience so far. The Pro3 and the Matrixbrute for example were horrendously poor for keeping arps anywhere near the one without this piece of kit. In my situation at least, I use the swing setting knobs to add some groove to the drum midi chain. 😍 10/10 for the ERM Muliclock from me. 😉

@bastianm5478

Жыл бұрын

Are you still running this setup? I'm trying to get back to into making music with my Deluge, Hydrasynth, some monosynths and iPad. But I guess I grew tired of the limitations and the annoyance of using a new system (to me). So are you still using this setup and does it work for you? Would I need to buy the ERM Multiclock to get the best result?

"don't hack me" 😄😄 Ricky, I just love your charisma 😄

This is why we have Midi Patch Bays. Latency will always occur when you Midi In / Out / Thru from one unit to another. Connect all your Midi gear In / Out separately to a few patch bays. AMT8's or Motu MTP AV's will do it with no latency.

@sK3LeTvM1

Жыл бұрын

Exactly. That's the way to do it.

@PJ....

Жыл бұрын

@@sK3LeTvM1 Ditto … I’m running 2 X Motu Midi Express XTs … Zero issues

Wish I had enough synth friends to justify a homie midi port hahaha

@josue.guevara

4 жыл бұрын

Zeus' Penis? 😂

@els1f

4 жыл бұрын

@@josue.guevara that took me longer than I'd like to admit to get 😄

@MrJosal21

3 жыл бұрын

Me too xD

@bmoneygeez

3 жыл бұрын

Facts

Dude ! SO glad you’ve posted this video it’s like the universe confirming I have to buy this ! Like you , I have had ALL the same insane frustrating problems recording hardware to audio and the after tweaking nightmare ! I have considered buying this for a while but yes the price for something that doesn’t make a noise was off putting , like you, say gonna close my eyes and hit buy now after your endorsement lol keep up the great posts stay safe 😊

Really appreciate the video I've been doing a lot of ableton work but haven't quite got to routing things together. Glad to have this to consider when setting up!

You explained this so well. I own one but hadn't got across it fully. I have now thanks to this.

Great video explaining that ERM device. I've always stopped playback and trimmed off latency from the beginning of the recording. Though that only works OK with drums, not other melodic sounds.

I used to have no problem until I got into modular and semi modular, because I played one synth at a time with external instrument. I was forced to learn more. Still learning. Videos like this really helps.

This video made me think, that Ricky you could be interested in Blokas Midihub, which is a intuitively programmable 4x4 + usb midihub. Not saying it would be a replacement for what you own, but it could well suit your needs. Just got mine, which I pre-ordered/backed and just as an example here are two things I was easily able to achieve with it: I'm now able to play my Digitakt as a polyphonic sampler, with my master keyboard. I'm also able to play my Volca Drum with my master keyboard so, that all the notes are mapped to the corresponding pitch values (as for some odd reason Korg didn't make it read midi-notes out of the box...). Great video once again!

Quick tip about that solo channel thing.. I think, when you output the audiosignal to another output then the main output of your soundcard, you can output that audio signal and use “solo track” buttons with no problems. You’ll set that up like you would setup a sort of monitoring channel. (like dj monitoring).

Was waiting for this 😁 very nice!!!

I appreciate you bro !! always good info. I'm facing the same problem and trying to rewire and adjust my studio with a hybrid system.

You are on the right "track" Ricky.. There is a reason studio's have expensive clocks to sync everything. Not only for midi but even more if you use multiple audio interfaces. You could also use a low budged tactic. If it sounds good it's good don't zoom in on the waveforms!

@ryanjay6241

2 жыл бұрын

Sometimes my lazy ass just considers that ... use the PC as a multitrack tape machine. Just play all the rest of the parts live over the beat. So what if it's not on the grid - as long as you're not editing based on the grid. But then you have to worry about plugins being synced to the beat too ... and then you're kind of limited/have to work extra hard to start moving things around. It would be "nicer" just to have perfect sync, but hey, when they recorded to tape they had no damn grid and I'm pretty sure all of the classic hiphop albums sound fine!

Thanks! The E-RM is nice, but I had a lot of problems with syncing from MIDI to my modular. So what worked for me to get a solidly syncing hybrid setup (DAW/MIDI/CV Eurorack), was the Eurorack module Expert Sleepers ES-3 in combination with an ES-5. The ES-3 connects to any optical ADAT out on your existing interface, e.g. RME Fireface UCX to sync your modular to your DAW and send CV to control your modular (but there are also other Expert Sleepers modules to connect your DAW via USB, SPDIF, Audio). The working principle is the same like with the E-RM: it syncs from audio - so the latency that was introduced within the DAW is exactly compensated for, which is best if your DAW is the master. With the additional ES-5 expansion, that is directly connected to the ES-3, I send MIDI from up to 8 independently controlled audio tracks to 8 MIDI DIN outs which connect to my MIDI gear (mono jack adapter to MIDI/DIN). This gives you independent control over up to 8 MIDI outputs + modular sync from your DAW: There is a dedicated expansion module with MIDI/DIN outputs (ESX-8MD), so you don't need the adapters, but I had the ES-5 in place, already. With e.g. an Ableton template, you can make your live easier and start all of your hybrid projects with sync setup in place :-)

For anyone worried about this problem and don't have enormous chains of gear, check out the MIDI Solutions Quadra Thru. It's cheap and simple, I got it when I was I first building my setup to mitigate MIDI chain issues before they came up. Eventually I got an interface with enough MIDI outs but that Quadra Thru still sometimes comes in handy.

Great video Ricky. Yeah, the Roland SBX-1 has swing but like you said most the stuff many of us use have not only swing but really good swing!

Your intro vid is the shit. Smooth, crispy and not 30 seconds long👌

Awesome video! this has been at least a year long grievance for me when i started playing live sets like four years ago.. i've been recording clock signals and sending them as audio out my SW-es3 for a year now. It's the tightest solution iv'e had and was way cheaper than the e-rm, which i really almost bought. looked amazing at the time, and more so now. this however only works because i decided to ditch all midi clocks that aren't running inside ableton. my volca sample and my 606 both are running on audio sample clocks into their analogue clock inputs. That way i can use the track delay compensation like you do. everything else is either eurorack, massive, operator or serum.

I love my ERM Multiclock! It solved all my problems and made my hybrid setup a seamless and painless experience. After many years of pain, it changed my life.

Very cool video thanks 🙏🏼 and I love this erm is is a life saver. The price for this unit is actually compensated with a tons of hours I saved with arrangement issues.

Preach it!!!! My synths are all over the place and there is no one adjustment that fits them all. Back in the day they had a very expensive device called the "SRC Friend-Chip" similar concept but ERM so more advanced.great explanation.

Love your vibes brother! I've experienced actual physical pain trying to get my machines to make sweet love to abletons clock ha. i may have to invest in this thing. thanks for the video bro and happy sunday x

Realize that midi is serial so the different ports allow you to work parallel! I recently bought a secondhand unitor MKll, It made me very happy to have 8 midi ports all working parallel controlled by the DAW midi master Clock.

In the last 16 years that I have used my setup in "hybrid mode" I have never had any issue with desyncs or offsets, cleaning up or whatever, and I have used legit anything I could get my hands on. At some point my BCR2000 was my midi interface and it worked perfectly.. Ableton Live (and I think FLStudio as well? not sure..) has seperate midi latency compensation dials on every midi in/out track that it can find. I would have several chains going and set the latency compensation for each of these chains and then all I had to worry about was the audio latency. With my crappy audio interfaces it's always been ~48 ms, so I tap that into the start offset of the samples and presto. That, at least, worked for me. I think what we can all pull from this is that it REALLY depends on what your workflow is. If your approach is much more performance/jam alike then syncing issues are much more problematic but if you sketch/compose everything it becomes no issue that something's a bit later or earlier. Never before commented on your videos but I thought it was about time. I like the videos you make and I secretly watch them while I am supposed to work. You rock!

It is amazing. This is amazing. To what you were doing, I would go DAW click to the Quadra-thru, and from there, send all the outs of the quad to the four hardware synths... an octatrack, analog rytm, and then, ... drumroll... a squarp pyramid. it serves as the sequencer for synths without sequencers... That squarp/synth clock chain from one of the quad outputs would go first into the arturia keystation midi, for its arpegiador, then out to a midi merger (same brand), and finally to the squarp input. This allowed me to have the arp of the keystation when I needed it, or just normal keys from the larger grand midi keyboard underneath it (hence the merger). But having the E-RM instead of the crude Quadra thru would be even more dope.

I really love "it exacerbated the vibe". definitely going to start using that to describe distorted basslines

Amazing product, i'm restarting my studio and this makes me reconsider using live again. Back in the day i had a super stable 8x8 parallel port midi interface, but newer PC's don't have those ports anymore so i was stuck with usb interfaces. First off, it was a creativity killer to setup the various latencies. When creating songs and just recording a 'live' mix worked, but when i wanted to track tracks no matter how carefully you setup everything micro-latencies occurred when recording killing the timing. Correcting track would be a time killer, and often ended up killing the vibe etc. such a nightmare.

@MayenMusic

3 жыл бұрын

I get what you are saying, its absolutlly depressing that with newer technology you get more headaches when making music. I got the Octatrack M1 about 3 years ago and it wouldnt sync with my DAW. it wasn't till I got the Multiclock that those headaches went away. great machine/

as a old dj i love the shift function on the multiclock. you can shift every channel in time til the groove is right. for you of course

Ricky Tinez’s content is some of the best content on the KZreadz

Nice! This has been a big headache for me as well. As a super nerd (by your definition) I've been working on a 19-inch module to solve the MIDI routing problem in the way that works best for me.

It's basically repurposing some old technology to solve a problem. We'd use audio-rate signal laid down as audio to the edge track of tape on reel to reel. It would contain dumb-FSK, smart-FSK, or time-code. We'd then feed that into something like an Opcode Studio 3 to read. Tape itself had its limits with wow and flutter. Another point to consider is that using MIDI THRU to daisy-chain equipment together has its limits. You shouldn't do that if you care about timing, especially with older gear. Again, we'd use something like an Opcode Studio 3 or Studio 5 to get a direct run from an MIDI interface to a hardware instrument. Don't daisy-chain. Yeah, someone is going to respond "it works fine for me." Good. But it's a crapshoot, especially with more than 2 pieces of gear.

@iqi616

4 жыл бұрын

Yep, daisy chaining is a no-no. Built myself a zero latency 6-way MIDI Thru box for almost nothing.

@infesticon

4 жыл бұрын

Yea I was gonna say most people with old gear pre daw people say avoid diasey chaining if you can help it..

@mb2776

4 жыл бұрын

yep, no daisy chaining, that's it. No need to spend 500 bucks on such a device

@TRaddcliff

4 жыл бұрын

m B so I don’t daisy chain. I go from Logic to MOTU micro lite. Each device gets is own midi cable. Yet shit will lose sync from time to time. How do you fix that. Also VCV or Blocks will lose sync. The ERM looks like it would fix that.

@ThePdeHav

4 жыл бұрын

Wow, you just transported me back to my teenage years, name checking this technique. Great Stuff!

Trust is an important word in music making. If a setup you've worked on for ages suddenly shows issues, you can hit a wall creatively - even mentally at times. Good you found a solution for that one. Although expensive, the result will definitely pay off.

thank you very much for a lot of clarification Ricky!

DUDE. I feel you on clocking. Plus. I really want a launchpad mouse pad!!!

Had the E-RM Multiclock for a bit but I upgraded to the ACME-4. Having knobs for midi channel swing, fine shift, and 16th shift is invaluable.

The steadiness of midi clock via devices like this is due to audio streams being prioritised and delivered accurately, as opposed to USB midi being delivered whenever the OS gets around to it (jittery mess).

@jannissen8297

4 жыл бұрын

@Knobcore this sound ridiculous

@s_9878

3 жыл бұрын

@Knobcore " You can get similar performance out of an old computer with the right hardware" Care to elaborate? Very interested!

@JyotiMishra

3 жыл бұрын

@Knobcore is, of course, entirely correct. As an old git, I've *used* and heard great MIDI timing and it's something modern tech doesn't have (with rare exceptions like Sequentix / MPCs etc. Computers now are appreciably worse and less snappy than decades ago because they are doing far, far more behind the scenes. But then, don't just take my word for it: www.eejournal.com/article/why-your-computer-is-slower-than-a-1970s-pc/

@exteriorsigns

3 жыл бұрын

@@JyotiMishra So true. I cannot stand the timing of modern DAW's. My old Mac IIcx running Cubase in the 90s sounded better than Live. I just discovered Reaper and its timing is better than most. I think I'm going to start using it soon. Definitely buying this E-RM as well. I love the timing of its swing. Reminds me of the Future Retro Swynx that I have.

@JyotiMishra

3 жыл бұрын

@@exteriorsigns Good luck, Bud M! If you haven't already, please check out the Sync Gen II from Innerclock. I love this page of theirs -> www.innerclocksystems.com/litmus

I'd love to be able to justify this. I have a similar hybrid setup just with different gear. My midi gear all goes through 2x ESI M8U, usually with Akai Force as the midi master. I've a laptop and a desktop, both running Ableton with different plugins installed. For the most part I rarely have issues, the odd waver in timing but thanfully not often at all and everything usually locks in time well. I'll keep this mind though as I'm sure its absolutely rock solid.

Oooooh, yeah ... MIDI clock/sync issues. This looks like a nice piece! One of the reasons I love using the MC-500 is because it remembers what MIDI channel you record a sequence on and then will always play back on that channel. Question: Does this unit do the OPPOSITE; ie, can you strip MIDI info from a port?

Looks great. Nice vid, thanks !

Such a great bit of kit. I use it religiously with the Avalon and any sequencers where jitter seems to play havoc on timing. Pricey but rock solid

this information is a discovery for me that I am new in electronic music production , you are an innovator in this time coexistence between the digital (daw) age and the analog age, thank you very much for sharing your knowledge I follow your channel closely, regards desde Argentina (sorry me english is very rough)

One thing that's probably worth mentioning is that the bandwidth limitations of MIDI itself introduce latency, and because it is such an old standard those limitations are very significant. For example if you transmit a chord consisting of 4 simultaneous MIDI notes the 4th note will actually be sent around 4 milliseconds later than the first one. While 4ms is unlikely to matter for most purposes if you're trying to transmit a lot of note and cc data AND clock down a daisy chain of devices you'll end up with problems even using amazing quality gear like the Multiclock (I have one too and I love it!)

@DiAL033

3 жыл бұрын

_MIDI itself_ doesn't really have bandwidth limitations, it doesn't "know" anything about the data transport. It's the hardware layer running the MIDI protocol that limits the bandwidth, so the 4ms in your example may happen on a typical 5-pin plug connection, but not on a MIDI connection over LAN, or a virtual connection with basically zero latency.

@mynameislinea

3 жыл бұрын

@@DiAL033 Literally the first sentence of the MIDI 1.0 specification is "The hardware MIDI interface operates at 31.25 (+/- 1%) Kbaud, asynchronous, with a start bit, 8 data bits (D0 to D7), and a stop bit.". I appreciate that this applies only to MIDI over DIN but this video is about MIDI over DIN! You're 100% right though, I could have been clearer :)

Being able to shuffle a TR-808 is so dope. Expensive when you don't own one, inexpensive when you do. Great vid.

I’ve used a midi sport 2x2 for a long time with success and paired it with an old Roland A-880 midi patchbay to route midi to all the synths. This avoids a long thru chain. I remember some older devices like the Yamaha A3000 sampler being sensitive to the midi channel which added latency if they were on a higher one.

Great video as always! Multi-clock looks rad. I'm curious if you can send the shuffle to din-sync devices (swing a 303?) I used to fuss with syncing and multi-tracking hardware jams but then just decided to use the DAW as a two track tape recorder. No more editing/eq-ing to death. Do a few takes, if it sounds good it sounds good. If it doesn't, move on to the next thing. I realize that doesn't work for everyone, but I gotta tell you it set me free.

@d.novzee

4 жыл бұрын

Def a good approach. Alternatively you could have a look at those little din to midi sync boxes which have a shuffle knob. I have one for my 606, but the latency is pretty bad, even without a DAW, so I'm here trying to work out how to solve that and other issues!

@bouguification

4 жыл бұрын

It looks like we’re more and more looking for a more straightforward approach to music, even (especially ?) if it sounds less polished. I’m done with latency issues. I just use my synths as sample material now. I perform exclusively on the Digitakt with maybe one mono synth for more excitement. Then multitrack on Live from the digitakt, no headache. Then mixing is minimal. Just a handful of carefully picked tools for basic needs. Everything must be done quick.

Awesome video!

@RickyTinez

4 жыл бұрын

Yo! Thanks for tuning in brother! Fan of yours 🙏🏽

It is not only about latency. I work with Logic Pro X and it´s midi-clock comes at the end in the computer processing hierarchy. So there you have additionally to deal with a very wonky/jittery clock especially the more happens in the arrangement. With the concept of ERM-MC using sample accurate audio-clock you are getting a very stable clock-timing. Now I have a very tight and stable grooving analog-DAW-kombination. Yes it was hard to spend 500 bugs for it. But at the moment the only way to fix this profound timing-problem. Thank you Ricky for this video!

Excellent video. I actually found there was no latency when I have a sequence going but it’s when I play something in real time it’s when I started to notice latency.

I always enjoy watching your content man. The one thing that I've been wondering about for the longest time is, the chilled out background music that you always use...is that an arpeggiated chord? Or did you manually play the notes into your DAW with a Keystep or something? It's crazy tight man.

The MOTU microlite also shows up as separate MIDI devices in your DAW - 5 input and output devices.

This dude is my fav KZread music guy for sure learnt so much from this man

I don’t know how you manage with the chains, sir! Glad ERM solved it for you. I find it easier to isolate the units on ports and use midi interfaces and the DAW to do the clock orchestration. I occasionally use channels routing over ethernet, but I try to keep the architecture as straightforward as possible. Cheers, Daniel

​ @Ricky Tinez HI Ricky, first of all thanks for everything you share, it's a real pleasure to watch your videos. I just bought the erm multiclock, and i would like to know if you finally did the ultimate jitter test between Ableton and an external sequencer synced by the multiclock : i mean the one you're checking on ableton if the same audio sequence recorded on 4 differents tracks during few bars should look perfectly synced? I think I've checked all your videos about the multiclock sync and didn't see what is to me the ultimate test. After few test with my set up, the signal of my mpc1000 (a simple kick) doesn't look exactly synced in ableton on the four tracks i've recorded. Okay My Kr55 drum machine and my Mpc1000 have never been so synced together but it's not perfect and i can hear little differents phasing( i mean nothing regular) when both are playing a four to the floor bassdrum. Could you tell me more about this test i'm talking about? Do you keep using the multiclock on your set up or you finally use the cheapest solution? Tnanks again for all you've shared.

Love the Sound of your Keyboard man! Btw will get the E-Rm too. One question was if it will transport MIDI CC AND Clock. you answered that so this is a safe buy...with my eyes closed off course :-)

The number of solutions to midi latency is as varied as the number of gear setups. Glad you got it sorted.

fuck, I need to step up my screen game, that wide view is nice!! Im also looking into a money pit, euro rack gear lol, specifically the cre8 nifty case with chip tune and a weird sequencer! love your channel, thanks for all the knowledge Ricky tinez !

Thank you for your thoughts. Obviously, you don't have too much sluggish and/or jittery MIDI gear around or gear with different sluggishness. If that would be the case, a tight clock cannot help, because the latency does not come from the clock, but from the MIDI latency and jitter from the devices themselves. I wonder, if your setup just cuts off some of the inbuilt MIDI latency for your hardware devices instead of coming them in late for this same amount of MIDI latency. So the click isn't tighter itself, but the delay doesn't disturb you so much anymore. In some Keyboard magazine issue from the 90s, there was an exhaustive comparison of MIDI latency and jitter for different devices - some workstations with up to 30 ms MIDI response plus irregular bidirectional jitter of aditional 10-15 ms and this not being a constant, but dependent on voice usage and MDI controller use as well. This would be something you cannot fix with a tight clock, but you can set a predelay, if you know the typical MIDI delay of your particular device. Fortunately, MPCs are quite tight and most modern gear is too.

Great video! I'm curious if it has the ability to quickly change to different tempos for each output. I'd like to be able switch some machines to half time on the fly.

I've never had any luck using ableton midi clock with external keyboards. It's always a little bit too late or little way too late. Gave up. 😑 I love it when you back track cuz got hiped up saying good things about it. Makes me realize there's still ppl who gives honest reviews out there. 👍

Hey Ricky... great Video! Your MPC is running tight? Every singel Kick?

learned a lot for handling many synths and devices wired around the studio 😘 Tx!!

Got mine yesterday. Its like a whole new world of tight, also, it allows me to mute different hardware on the fly or realign my Leploop if it goes awry - which it loves to do and I love it to, like a wayward child.

I use an expert sleepers usamo which does the same thing but with only one midi output clock is tight but my question is do you need to still right click every clip you record in to ableton and set start 1.1 here then adjust the loop end point which is a PITA ! ?

I've had an ancient 2 in / 8 out MIDI box forever (Digital Music Corp MX-28M). Each out is selectable to input 1, 2 or Merge. Totally invaluable, even though it's an older and more limited box

@Ricky Tinez What about capturing the internal clock of the MPC 3000 and sending that back out for every other pass? Does the Multiclock allow you to capture the clock of external gear and allow you to add that to an audio track in your DAW? Ever heard of Innerclock System's Sync Gen 3LX?

If you wanna solve the midi clock and midi latency problem forever, you made the first step with buying the ERM! Now make the second step and add a MioXL. Use the ERM only as a MidiClock distribution, if you have some analog clocked device (as example Eurorack gear) you can generate perfect analog clock with the ERM to! The MioXL (mio10 is also very good) is used for MidiNotes and every instrument is on a separate output. Don‘t chain midi devices! Then filter every incoming clock message in the MioXL except the one stable from the ERM. And you never will care about this latency shit again. If you don‘t have enough ports, just add another mio. We have gear for thousands of dollars, but the tools that really help have to be cheap? It‘s like buying a lot of cool cars and putting some 15 year old tires with no grip on them.

@ktreier

Жыл бұрын

The iConnectivity MioXL is such an underrated device but for $500 you get 22 MIDI ports (8 DIN in/out, 4 DIN out only and 10 class compliant USB), ability to patch any input to any output, filtering, remapping, ethernet connectivity, etc.

@skoggiehoggins1445

5 ай бұрын

thanks for writing this 👍👍🙂

Cool vid! You need a 6U rack for those Black Corp. synths! hehe

@DidierBampiliMusicProduction

3 жыл бұрын

I have music contents check me out now

This is great, can I use the E-RM MIDI clock to sync a DAW or is that just a MIDI clock source

A few years ago I bought a secondhand Roland A-880 for €100 and it has served me very well since in my hybrid home studio in combination with Ableton Live.

Yo homie, thanks so much for the video. I just watched all your videos on latency lol. So this fixes both clock and note latency? I would love to see a video where you show the result of this device working and recording/zooming into the grid to show the precision. I'm ready to pull the plug because I'm fed up lol.

Always a pleasure to see your videos man! I got mine today so who better to check out than you I don't know man! Cheers!

Great video - I have a few questions and thoughts: 1) question: I assume you are monitoring the input of your synths in Ableton. Is that right? If so are you passing the audio through plugins onto master buss? 2) observation: when I record and *do not* monitor audio in Ableton from multiple synched grooveboxes (Ryth, DT,) and midi clip driven Virus and CZ101, I do not observe crazy latency. When I monitor - the problems begin... 3) I use a mio4 by iconnectivity which has a configurable router/mapper available for windows and Mac OS. I never experience problems when I am DAWLESS. 4) However, when monitoring in Ableton I was getting crazy latency and chased that around for weeks until I learned about the 'Reduced Latency When Monitoring' menu option. Literally the problem went away once I checked it. I am not sure this would work in your rig, but I wonder if you had tried that. I am intrigued by the E-RM device despite these comments. The audio clock synch sounds like it would squash all latency.

@jjrusy7438

4 жыл бұрын

over the years I have also come to this conclusion. It really got bad while multitracking. fwiw, I used cakewalk and sonar mostly, so IMO, it is any DAW.

Hey, I don’t know if this would work, but maybe moving the plugin sending the audio clock from a “normal” track to a return track would fix the soloing issue. Since the return tracks are normally solo safe. I hope it works!

I mate ! Thanx for your video, very useful for me. I just have a question at 10.45 you say that you only use the mid out port 2 for all the gear you use usually, So how did you configure the latency for each individually while they are plugged into the same port on the ERM? Thanx