Dude, nice video. I just got a car based on this and am super new to RC cars. Super helpful and thanks for taking the time to make this.

This was very helpful. I was looking at buying this model.

Thanks you so much for showing how to disarm the car! I am new to the hobby with a hypergo H16BM and I had no idea how to proceed to dismount the parts on my first meticulously maintenance. I already ordered some 50w 750 cts shock oil from team losi and the combo traxxas for differentials. Thanks for the tips on the parts like spur gear and diffs. In case I need to replace them I will go with the exact same stock parts. Again thanks for the info and I’m subscribed now :D

@hofsplace

9 ай бұрын

Thanks, you're welcome

nice video of the tear down! the hyper go is my first RC, and I love it! I had for couple of months now, and no issues so far. Everything runs smoothly. But I also don't abuse it, and use it mainly in the park and on the streets. I'm considering upgrading the transmitter to the Dumborc x6fg with gyro. Do you know if that would improve the handling of the car? and is it worth it? thanks

@hofsplace

Ай бұрын

Just stick with the standard transmitter. if it breaks, buy this one: kzread.info/dash/bejne/o2ekxJOqdtGyZKw.html

Cool video. I just placed the MJX into the shopping basked at ali :) Based on your review and this video, I am sure it will be great.

@hofsplace

9 ай бұрын

Nice! Hope it arrives soon and you can enjoy it 🤟🏻

Nice Vid. But not everything is correct. The metall diffs in the vid at about 4min are not from mjx, as you see on the round drive axle. The mjx axles are hexagonal. The stock gears are die cast zinc alloy. Which is cheap to produce, but it is very soft. Ok for 2s. For 3s not durable enough. There are Y parts - (powder metall) and G parts (milled steel) also availble original from mjx on ali. If you run on 3s its the better choice. The little more way is not makeing a big Difference. Weak point also are the screws in the diff case. They can break and the diff opens. The stock axles can break on the cvd pin. The chassis are durable. I only break one rear tower on my 14210. What is not goid, that the car has no slipper clutch, so much force goes through rhe drivetrain at on speed landings. I git 4 mjx. Good cars, but not perfect. Have problems like every other car, if you drive them a lot. Greetings from Germany 👍

@hofsplace

8 ай бұрын

Thanks for your ad on

@buttracerrc

8 ай бұрын

@@hofsplace 👍 I think i Drove about 100 lipo Packs in the 4 MJX together. All in all i Like them a Lot, cause AS you say. The Quality is good For the price. And you can Put them in a Backpack and Take them with you. I think i Make a Review vid some day.

@hofsplace

8 ай бұрын

​@@buttracerrc indeed. Did you see my review of the 14210? kzread.info/dash/bejne/g52Y0pWHqdDAqNI.html

@k88kee

5 ай бұрын

Thanks, I'm a complete beginnerand I've just bought a 16208 and am prepared to run on 2s initially but then move to 3s and upgrade the spur when I'm in more control of it

If you can answer me I would appreciate it: -Throughout the life of these cars it is natural that lubrication is necessary.. From what I can understand, you can only access the parts that may need lubrication by demonstrating, right? Dismantling, for someone who doesn't have experience, can be ehh... a great adventure with a lot of things that can go wrong, especially when it comes to putting it back together. How often should lubrication be carried out? Should a special lubricant be used or should ordinary grease be enough? Thank you!

@hofsplace

8 ай бұрын

Hi, maintenance extens the lifetime. Sand and water are your main problems. When disassembling your car, lay everything in order how you removed it and make lots of photo's when doing. I think i made a video where I disassembled this car, not sure, surf my channel please

nice tear down, how we come al ong way from the Older styles, I see no slipper clutch, why the drastic torque wheelies on demand.

@hofsplace

8 ай бұрын

Hi, no, there's no slipper clutch. The getting better all the time

@fishycomics

8 ай бұрын

and that is where control takes place thanks @@hofsplace

Hi..i watched your videos..can you help me.I bought new one 16210 But my hypergo reverse function not working properly why is that

@hofsplace

2 ай бұрын

I tried multiple things, but I can't replicate your problem, sory

Hi, could you please tell me, if there are better quality bearings for the MJX? And if so, where can i find them. Thanks in advance for your help Regards

@hofsplace

6 ай бұрын

Hi, take some measurements of them and search for rubber sealed bearings. Don't buy the cheapest ones, by them from known brands, Tamiya, Traxxas, HPI etc.

@diogocarlos1

6 ай бұрын

@@hofsplace Ok, next time i disassemble it i'll poste the measurements. 👍

@hofsplace

6 ай бұрын

​@@diogocarlos1 just sent the measurements to your local RC dealer, they probably have the needed bearings.

Nice video. Are you Dutch by any chance?😁

@hofsplace

8 ай бұрын

Thanks, yes, I'm

How to upgrade the lights in this car?

@hofsplace

7 ай бұрын

It's a fixed bar, so upgrading isn't ideal. Just add an extra on the roof for example

How close this car

@hofsplace

3 ай бұрын

Hi, sorry, don't understand your question

Hi Love from india ❤ have instagram??

@hofsplace

5 ай бұрын

Thanks! Sorry, no insta

@sangwan2364

5 ай бұрын

@@hofsplace any social??

@hofsplace

5 ай бұрын

​@@sangwan2364FB, Fabian van het Hof, but I don't use it to post stuff myself. I use it to reply in all RC groups