Thank you for sharing this. It was very helpful 🙂

If your house humidity is too high or low, the resin won't cure. Also, if your heat in your home is too low, it won't cure properly...more than 77 degrees is needed for proper curing. Ideally, spring and fall are your best times to achieve this.

@khalidray9117

3 жыл бұрын

I realize Im pretty off topic but does anybody know of a good site to stream new series online ?

@arlodamian4565

3 жыл бұрын

@Khalid Ray I use FlixZone. Just google for it :)

Thank you this video was so helpful I made some grinders and they’ve been soft for like a week but I think I’ve added too much pigment. Is there no way to fix this

Thank you for this information

Thank you! this video was helpful explaining some stuff i had read and was a little confused about. i do have a question through, the mold i used isn’t very deep, i did pour on a level surface and the depth all the way around is the same so i know it’s even. i didn’t use art resin but my question is, since my design was thin to begin with, does that mean it may remain bendy? or does that not matter as long as it’s even?

If you mixed the resin incorrectly, can you do another coat or properly mixed resin on it as a second coat?

Thank you 😊

I bought pixies cups with measurements on them. I had bendy problem and several projects later i discovered that the printing of measurements had a flaw. I still buy pixies cups but I check then with medicine 1 oz cups first. Everytime I use new cup I check measurements. I wipe out cups so I reuse a cup many many times. Hope this may help someone else. Hugs Sheryl 💙🎃💙

I'm curious to know if the type of resin can also be a factor? Also, thanks for this great explanation!

@DevonyAnastasia

3 жыл бұрын

Definitely a factor in how long it takes to cure! For example MagicResin’s Art resin cures solid in less than 24 hours, but their deep pour resin takes up to a week.

Hi, I'm new to your channel. I really love the aesthetic and the way you explain. Do you mind if I ask you where I can find your coaster molds or something similar with edges similar to yours?

@DevonyAnastasia

3 жыл бұрын

Here’s the link to purchase :) devonyanastasia.patternbyetsy.com/listing/914463145/platinum-cured-silicone-mold-for-agate

Hello, I love your work! Please, I have a question, I have little mistakes on the top surface of my coasters and then I sand them out, but it leaves scratches and a matte look. What advice do you give me or a solution to make it back to normal? Also, do I have to use a scale to measure my resin or is it fine if I could use measuring cups with a 1:1 ratio? Thank you for your help!

@DevonyAnastasia

3 жыл бұрын

Hi there! Measuring cup works fine :) I would not suggest sanding down the top of the coaster, I only ever sand the bottom because as you said it can leave small scratch marks. You can try pouring a second clear layer over the top and it will get rid of those scratch marks!

Hi, my coasters also havnt set/harden'd it's been more than 15 days now. Is there any way I can fix it and make it hard now ? Thnk u

Hii! I put topcoats on my resin coasters, 2 of them are completely dry whereas the other 2 are still sticky after 24 hrs, what do i do?

Can you respond pls, is sticky, bendy epoxy resin toxic, does it release fumes?

My is still soft. Its been 3 weeks. Not thin, even mix, deep mica Scarlett color. Same mix was used on a coaster, same as the one that won't cure. One cured one didnt.

Tq I learn from you... 👍

thank you, I guess my mom is getting her Mother’s Day gift late

I kept for more tgan 3days still not cured and its bendy what can i do mam please suggest me!!!!

I made resin keychain.......when I took them out of mold after 24 hours they were a bit bendy........but after 2 days when kept outside mold they were hard.....so that means I have to keep them for more time in mold or is it okay if they get cured outside the mold??

@DevonyAnastasia

3 жыл бұрын

Yes it should be fine to cure in the mold

Hi i made some whine glass holders and after even 5 days they all bent ... of i did put to much pigment ..is there any chance to get hard after few more days !? 😐😳☹️

@DevonyAnastasia

3 жыл бұрын

I doubt it :( after 5 days usually they should be fully cured

Thank you cuz I did my first coaster yesterday and I checked it and it’s bendy. I’ll wait

@DevonyAnastasia

3 жыл бұрын

Good luck! I’m sure it’ll be better after a couple days

Hi! I have made coasters and a wine caddy the coasters were solid but the caddy keeps bending I have let it cure for two weeks and still bending. They are the same thickness. I’ve done some thicker but still bending.

@lehuananiburrell-williams5304

3 жыл бұрын

I’m having the same problem. When I add my wine glasses onto my caddy, it bends and droops downward. Idk why it’s happening everything came out fine

@menavarro2946

3 жыл бұрын

@@lehuananiburrell-williams5304 I have one that I did and after almost two months is not bending as much. But still not solid.

I’ve used 4 different varieties of resins, one seemed less hard, but the others cured very hard but still softened in sun or heat. Now I’m starting to cast trays and larger pieces, and don’t want them sagging all over at a show.So I can’t figure that out- do all resins soften when they get warm?

@DevonyAnastasia

2 жыл бұрын

Yes! Most resins have a heat resistance of around 120F, and above that temperature they will soften. However, when they cool down again they will harden. This video has some info on it! kzread.info/dash/bejne/iXillLCvYMvJmag.html

Can it harden outside the mold if its bending

@truck6859

11 ай бұрын

That's what I wanted to know. You asked this question two years ago. Have you been able to find out?

Some of my work didn’t cure i think its because of cold weather. I just try to the 2:2 and 2:1 mesurement but it still bendy. I don’t know what to do anymore

@DevonyAnastasia

3 жыл бұрын

Could be too much pigment added?

My resin is not getting dry bit part of it how should I cure that

My coasters became hard n beautiful but I opened pack to gift n found it sticky at places. Which was not the case when I kept it..

Hello, I have a bad first experience with Art Resin product, I did my first coaster with ArtResin brand, after more than 72 hours I check it , it is nice!! Now it more than month but when I try to fold, I feel that it can be folded hardly "bendable", not strongly solid ? it still bendable~!!!!! I don not apply ink or pigments, I mix well with equally amount of ArtResin product I try my second attempt more careful to adhere the instructions but the same second bendable coaster!!! and many other I am not sure if temperature matters?? or what?? as I kept it in a wooden closet cover with plastic cover. As I searched ArtResin not suitable for coaster as it is bendy!!!

@DevonyAnastasia

3 жыл бұрын

Was the coaster too thin? Warmth/heat also makes coasters bendy but when they cool down again they harden