I have a 2023 TRD Tundra and the rough country 1.75" leveled it perfectly

@JoseRamirez-mh2mv

2 ай бұрын

Did you have to upgrade upper control arms?

@domp7729

2 ай бұрын

@@JoseRamirez-mh2mv no but I would have if I had gone with a bigger spacer. I take my truck on trails here in CA mountains, nothing too crazy. It still drives like it was stock

@mikesphoto96

5 күн бұрын

Where did you take the truck to get the kit installed? Any chance in SoCal?

@domp7729

5 күн бұрын

I found a local shop in my area that works on alignments and suspensions. $120

Great video and tutorial. If you would of put the nuts on the studs before trimming then unscrewing them would of taken care of the end of the threads and be easier to start them on the install instead of cleaning them up.....

Excellent video.........thanks bro........I have the 2022 Capstone....

@yotaxpedition

5 ай бұрын

Awesome! Glad we could help you out!

Awesome video man! Loce the Fabtech size and it looks great but trimming the strut bolts kind of sucks. Question: do you need the extra spacer on the bump stop with the Fabtech lift?

@yotaxpedition

6 ай бұрын

I took the bump stop spacers off when I installed the Fabtech kit. Im sure a small spacer would be helpful but the Icon spacers was to much with the Fabtech kit.

Thank you for the video. One question, we got 35s tires on TRD wheels 50+of set eom . And you got 0 ofset. Should i buy wheel spacers, like 1 inch or please advise Thank you for your time

I’m happy with my Rough Country 1.75” in front and Cornfed 1” in rear on my 23 Tundra

@Citadel2A

5 ай бұрын

I just ordered the RC 1.75”. Anything to note before I install?

@carrow2250

5 ай бұрын

@@Citadel2A I took it to a mechanic. They didn’t mention anything. The only thing I’ve read on Tundra forums is that without the 1” rear spacer the front can be above level, meaning it points up a little and a lot when towing, and others say it levels just fine. The 1” rear spacer still gives it a bit of rake

Can you tell me what size are those tire and offset etc. Thanks

What size is the fabtech level kit?

Very useful info and great video!! What are the Method wheel specs? Thanks

@yotaxpedition

7 ай бұрын

Thanks! The Method wheels are 17x8.5 with a 0 offset

@eddieota9422

4 ай бұрын

Thanks, and what is the tire model and size mounted on that wheel?

What should a 1in x 3 in leveling kit cost? installed

Good job.

@yotaxpedition

5 ай бұрын

Thanks!

I’m being told by the outfitter that the fabtech 1.5” won’t work with a 295/70/r18 on a 2022 TRD sport, is that true?

What if you wanted to level the truck from the back ;to match the front .

Why not show the afe

nice, now I want a see a test with a 10 000lb trailer with a distribution hifch with and without the bar. how is ride quality with with a big trailer?

@mikehughes8023

4 ай бұрын

It’s fine in my 2023 Limited which tows up to 12,000lbs. I don’t have the iMax hybrid engine.

@MrTgrasshopper

4 ай бұрын

How is the squat with a leveling kit? Mine squat by about 2.5" without the front lifted. Does that mean if you lift the front by 2" it will squat by about 4.5" The headligt will point at the sky?

He man. Im not trying to be a jerk, but are you sure you got those measurements correct? The Icon was 1.25' over what was suggested, and the Fabtech was an inch over. That doesn't sound right to me. Also, the ride with the Icon would have been greatly improved with an alignment. Maybe that's why those measurements are off, perhaps?

Hi guys, great video, I have SR5 TRD sport 2024, witch would be the best option to level this model.?

@yotaxpedition

3 ай бұрын

I would still go with the fabtech yotaxpedition.com/products/1-5-inch-front-leveling-kit-tundra-2022-2024

@Xilent_Nexus

3 ай бұрын

@@yotaxpeditionthanks. I also have that same model.

@arubalcaba

2 ай бұрын

@@yotaxpedition do the 35's rub at all with the fabtech?

@bm5447

58 минут бұрын

​@@Xilent_Nexuswhat did you end up going with. I have the TRD Sport and looking at leveling kits.

What model tundra was this? Just trying to get the correct measurements as I know that different models have different measurements.

@yotaxpedition

3 ай бұрын

This is a SR5 model

Did you have to do any trimming to fit those 35s?

@yotaxpedition

2 ай бұрын

We did not trim anything. There is a small bracket at the back of the front wheel wells that we removed.

I think you’re reading would change after alignment

@eduardomonroy43

Ай бұрын

My thoughts exactly the camber seemed very positive with the icon making the ride stiffer and not settling

How much offset did those rims have?

@yotaxpedition

4 ай бұрын

These are 17x8.5 et0

Hard to tell if you are wearing ear protection or not but if you are not here is a pro tip, you will go deaf not using plugs with that impact gun. Also a hammer strike, nothing worse for hearing. Good work otherwise.

@truthtold3179

5 ай бұрын

Dumb

I have the 2023 trd sport factory dropped in front will the fabtech leving kit work?

@franksmythe6969

4 ай бұрын

It will work, but considering you're already an inch lower in the front from the factory, you won't be as leveled. You'd be better off going with leveling struts. I've got the Rough Country M1s set to 1.5". Had em for almost a year now, and they're awesome. They are adjustable from 0-2".

@bm5447

Сағат бұрын

​@@franksmythe6969the TRD sport is only .5 inch lower not 1 inch

@franksmythe6969

Сағат бұрын

@@bm5447 You are correct. I remember looking that up after leaving that comment and I just never went back to correct it. Still better off replacing the struts all together when leveling a TRD sport though.

@bm5447

56 минут бұрын

​@@franksmythe6969that sounds like the route I will go. Is it a pretty easy install, I plan on doing it myself. Did you need an alignment after?

@franksmythe6969

35 минут бұрын

@bm5447 Always do an alignment. It pulls your toe way in, and your camber way positive.

Did you add spacers ?

@yotaxpedition

2 ай бұрын

Wheel spacers? We did not.

why level?

@yotaxpedition

7 ай бұрын

From factory the front sits lower than the rear. A leveling kit is a cost effective way to bring the front up to be level with the rear. A lot of people like this look better. It also allows for more clearance for bigger tires.

Lol on Icon's welds......wouldnt use that...

Amigo no veo que tienes mucha experiencia en esos trabajo

Get a real lift kit 😂

Quite frankly…..This is WAY too technical. Go positive camber or go negative? You ain’t breaking speed records here man. I simple 200 buck lift will suffice your average wheeler. So why the tech shit? Askin fir a friend!

@yotaxpedition

4 ай бұрын

Do you want to buy a "leveling kit" and install it to have your front end now higher than the rear? No. The reason for this video is to test different leveling kits to see which kit actually levels your truck so people don't waste their money on a kit to be unhappy with the result.