Love what you guys do. I feel like a kid again watching powernation.

Need to test a Borg against a Garrett ball bearing turbo

@pddofficial

13 күн бұрын

Which Garrett model would you like to see tested? G45?

@brianp5579

12 күн бұрын

@@pddofficial yes

This channel makes me want to build a diesel drag truck

@westtexastll1978

18 күн бұрын

JUUUUUUST DO IT!!!!!!!

@DODTruckPulling

17 күн бұрын

I done did it 😂

Thanks for the deep dive Myer. I love both the educational and fun videos you guys put out.

Interesting comparison!

This is a high performance channel, but after seeing engines run for weeks, sometimes months under load. It made me a Borg fan!

@pddofficial

15 күн бұрын

We love Borg turbos as well. We just wanted to offer a good cost effective turbo that flows like the big Borg but fits under the hood easier.

If you did this test as a single turbo that blade count difference would really show up. The 11 blade will be superior at any part load situation and the fewer blades will do better when it’s tounge is hanging out getting flogged. Try an hx60 though it will beat the borg a 100hp😊

Great info! Good job Myer

Nice! I picked up a Momentum Worx 11 blade s475 and I got a 1.15A/R t4 turbine housing on it and that's what I'll be using as my primary when I get my twin kit finished up.

Myer's the man!

Top notch info. Thanks

Great content as always PDD!!! Always learn something when I watch this channel! 👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸

@pddofficial

12 күн бұрын

Glad to hear it thanks for watching!

Great Video. Touched all the bases. Would like to see just how quick they would spool off idle up to max rpm but you kinda touched on it in the video. Still the Aggressor is the clear winner when the results are this close and the price gap is that big. Ill be ordering an Aggressor soon. Thanks for the vid and damn good job on the summary Mur.

Best Turbo video ever!!! Keep it up! What size manifold turbo was on that?

@pddofficial

15 күн бұрын

That is our 62mm HE351 with a 76x67 mm turbine wheel. Very street friendly set up

Always love the time and info! Whats the fuel setup on truck?

@pddofficial

15 күн бұрын

It’s got PDD pump with 12.5mm plungers and some power jet injectors.

You guys should do a collab witb anthonycooke. I wonder what stinky pete makes with his homemade diesel. You should also do a random turbos video.

Need 6.0 compound turbo kit updates!

@BaldBozo

18 күн бұрын

I feel like it's been forever. I'm waiting as well.

@kx519

18 күн бұрын

Yessss. I'm a cummins guy, but I was excited for the 6.0 compounds

I knew the big side difference between the pdd and borg but it's awesome to see how much better it is for a 12 valve that's going to be used! Ie track, fun street, tow pig etc. Spent wayyy too much money on turbos over the years.. not anymore! Thinking pdd 80 over pdd 62 would pair better with the 5 spd and stage 2 head I have.

@pddofficial

15 күн бұрын

That would work amazing!

I feel like this setup is limited by the secondary turbo. I don’t know what the atmospheric pressure is up in Utah but 40 psi interstage to only 60 psi at the manifold seems strangely low. You’re doing over 3.5 pressure ratio at the primary and only 1.4 at the secondary. Assuming a 75% compressor efficiency, the secondary is only providing a marginal density increase. I’d be interested to see the outlet temperatures of both compressors.

@pddofficial

13 күн бұрын

It is limited by the small manifold charger as far as max power is concerned. But it is a great compromise for easy driving and quick spool.

Split vane T6 with the vane actuator vs non-split vane T6... total spool up time at a static 1700 or 2800rpm dyno pull. change in Back Pressure and EGT's?

🤯 we need it folks… start eating ramen and baked beans 😂

What gauge are you running for AFR? I am trying to find one for my 2nd gen so I can see how much more nitrous she can take but I can't find a gauge that will work, about to just build a custom solution with an arduino.

@pddofficial

15 күн бұрын

I don’t remember but it’s not great because it won’t read lean enough. We have a better one coming I’ll try to call out the gauge in a future video.

What's the A/R on that turbine housing? I have the 1.58 on a 476SXE, and it's pretty sluggish until 1800+ rpm, so I've bought a 1.32 to hopefully bring my setup to a more usable range. Just wondering

@pddofficial

15 күн бұрын

The turbine housing we used was our new single scroll housing. A/R is technically 1.15 but with the divider gone it actually flows better than the 1.32.

@Matt-zx1xj

15 күн бұрын

@pddofficial Does it spool faster than a 1.32? I hear the big single scrolls are sluggish compared to divided. The response of a 1.15 with the flow of 1.32/1.58 would be a god send with my 6 speed. By time I've built any boost, it's already time to shift again.

What injectors were you running in that truck?

@pddofficial

6 күн бұрын

Our power Jets. Biggish ones

@brianconnor5213

4 күн бұрын

@@pddofficial I have the stage 2 odd jets in my 12v. Love them. I take it they are the stage 3

The Dirty secret is lowering EGTs is only half the problem. Lowering engine temperatures is the other half. That needs to be addressed in your videos.

@pddofficial

15 күн бұрын

We talk about that all the time with each other, but I don’t think we have done a video on it. I think that’s a great idea!

Is the aggressor series Chinese turbos ? No offense just curious

@joshuaquilliam2887

18 күн бұрын

Even Borg is manufacturing the S475s in CHYYNA now. Seems almost impossible to stay in business without selling out to the slopes.

@bronson2585

17 күн бұрын

Yes but they rebuild and rebalance the thing. Much better quality

Aggressor barely sounds lit… like it wasn’t being romped on. So with that load, that may be telling us something…

I’m not saying you are wrong or you are correct either. I am just questioning as to why you are the only people that are telling people to take drive pressure with a grain of salt. It may be that your concerns aren’t the same as others. I would also assume that drive pressure doesn’t matter when you are only concerned about peak power numbers. I am concerned about working truck power and how to make it live longer and pull better. You will find the limits and explode more motors and turbos which gives data that I will never get.

@pddofficial

13 күн бұрын

We are not saying take drive pressure with a grain of salt. We are saying that the readings on the dyno may not perfectly represent what is actually happening. Boost to drive ratios are very important just tune for a trend rather than focusing on the individual boost and drive numbers at specific points.

@mattmorrison6958

13 күн бұрын

It sounded to me like they were making the point that drive pressure psi is only measuring the average pressure, with much more going on in the background to see if things are actually moving in the right direction at the right time.