Buy your own full size coin pusher here! bit.ly/clawd00dcoinpusher

@leeleedavenport3642

Жыл бұрын

Hello 👋 I'm le ... I'm trying to find out if oil 🛢️ is necessary in the machine ? Like what type of oil and exactly where does it go ?

@robertridenhour3805

Жыл бұрын

Used WD-40

Thanks for the tour of the inside of a quiet pusher machine.. That sign piece you're enquiring about changing. That's plastic or plexiglass as far as I can tell.

4:26 The only person to mention and show the payout % mech. I knew about the lip, didn't know it was what controls the payout %. You say you don't make money, only money from the bank, well that lip is also how these machines make money. Don't want people to win as much, leave the lip in and set it higher. But you have to get the sweet spot. Not so high no one ever wins, but not so low everyone wins. Removing it would be a bad idea.

The material for the sign is Lexon,vinyl graphic's people who make signs could get the material and put vinyl graphics for custom sign

Thank you for the video. It was 100% what I was searching for.

this is pretty cool!! I built a coin pusher for school and am trying to add the tilt sensor functions. I have everything I would need to set that up except for the solenoid. Could you help me out. What does the label on that blue solenoid that lifts the flap that stops coins from falling over say? It would be really cool if you could help me out. I love watching your videos, especially the ones from japan. keep up the good work and continue to make it rain!!!

@ClawD00d

4 жыл бұрын

That is a really cool you are working on your own coin pusher? If you join the discord and PM me, I'll send over some pics of the solenoid.

Pull the gearing apart, by taking the motor off, give the gears plenty off gear grease (polyurea grease), close it up and let it rip for a few hours, open again and add if any dry spots left.

Seems a bit loud to me but who knows, maybe this is why arcades always have loud music, is it a planetary reduction gear in that box or something. Surprisingly primitive inside, that looks like a super old XT PC power supply, and most of the stuff is off the shelf parts cobbled together!

Great info. Thanks

Here is a quick temporary solution to small speakers that are too loud. Just put layers of tape over the speaker. It makes it way quieter and you can later remove the tape.

Can you adjust the size of the slots on the sides, the ones for the owner?????

@ClawD00d

4 жыл бұрын

Yeah, you can adjust them. On this video they are wide open, however you can close them if you want!

After you activated the tilt alarm, I said 'that was loud' the same time as you did XD so one of us owes the other a soda lol! Really love this video, been wanting to see inside one of these for like forever! And if I knew how to do a sign for the front I'd be all over that for you :)

@ClawD00d

4 жыл бұрын

Ha, thank you Mel!

@melsterdoom

4 жыл бұрын

@@ClawD00d I'll take one of the Dr Pepper cream sodas please XD

2:35 that was a cool demonstration of the tilt detector and solenoid

You should take that gearbox apart, clean out all the old grease and replace it with some proper molybdenum grease. Hope the gears aren't too far gone to ever again be quiet. :D

What would be interesting to do is 100 dollars in quarters to the see the return for the player and return to the owner see who makes more

@ClawD00d

4 жыл бұрын

Fantastic idea James!

that was a great video and showed me how to make one:-). not to hard ill use a wipermotor i have some in spare. and the power supply was 200watts not hard or expensive to get. i guess you just made me make a coinpusher:-) though im in 240 volt land called Sweden. thanks again

Do you have to have any kind of permit to put one of these in a gas station

That scraping sound, couldn't it be the "pushing plate"? Or the pin that moves inside the little slot to move the plate? Maybe put some PTFE composite strips (PTFE = Teflon) underneath it. Might take away some of the noise.

@ClawD00d

4 жыл бұрын

I thought about that aswell, but I put my ear next to that gear reduction and that seems to be making a bit of noise.

Claw dood I love you and claw dood I love watching all of your videos and claw dood I love watching all of your live streams and claw dood have a lovely day

@ClawD00d

4 жыл бұрын

You rock!

The reduction gear box definitely needs a service

Thanks a lot for this video, i'am making my own and your video helps a lot

Those side slots are interesting. I didn't know.

I agree, the amount of motor noise is excessive. Most bar owners wouldn't have it. I wouldn't. I''m thinking the extra wire/ plug would be for a built in changer. I would like to see how that is secured and fed. Also, I would be curious what the profit to cost (average of $1500 / per new machine) payback time is for the owner.

Im building one of these I wish you would show us all how that lip is installed on the edge where the quarters fall off.

The gear reduction in the motor is what's making all the noise. Gear reductions like that tend to be rather noisy. Plus I don't think you'll be able to disassemble it to check the lubrication in there. If you can disassemble the gear case you could possibly clean it out and repack with some good Moly grease. I'd love to take a non-working one apart. It's definitely engineered to a certain price point for maximum profitability.

@ClawD00d

4 жыл бұрын

One day when I get some time I might attempt to check it out.

@JaredJanhsen

4 жыл бұрын

@@ClawD00d If you really want to narrow down the source of the noise, you can always get a Mechanic's stethoscope from Harbor Freight. I'm pretty solid though on your noise issue being in the gear reduction from the motor to the pusher crank. The pusher itself seems to be on some pretty good drawer slides.

@ClawD00d

4 жыл бұрын

Ive been meaning to get one of those for awhile, got a reason to get one now!

@Lickemstick

2 жыл бұрын

Agreed. The engineering is kind of cool but the build materials left me wanting. Maybe some internal sheet metal cladding would've been nice or maybe a stamped sheet metal frame or something. Particle board, toughness and money don't jive in mind mind for some reason lol.

hi, first of all nice machine! very impressive how you made that on your own. I only have one question, how did you ensure that the quaters or other coins didn't fell into the 'playing room' ?

I have played one with a fruit gambling function on it so it has extra possibylitys so when you spin 3 bags of money(coin activates te spin)you have extra chance to win like you get your money back

Would be great to explain how the coin checker work. This simple trick looks ingenious

Where can I buy a motor from for a coin pusher ??

It looks like a gear reduction at the top of the motor you could pack it with a lithium grease and reduce some friction noise. Other options would be fit the interior of the machine with some sound deadening foam. If you are using the machine for personal use maybe retrofit a power button on the front to power it on when you use it. Save the motor from burning out and you wont have to get down to the power it on and off. this is sick i want one

Have you done any videos where you build things with quarters?

Am have a push coin machine am buy 5 days ago but the mero push stop what is can be the problem u now if u can tell me tanks

The sign could be made at a signwriters

Can u just down the tilt sensor alarm time to a shorter time like less than a quarter of a second??

@ClawD00d

4 жыл бұрын

Its currently set at 3.5 seconds, so it could be possible to go lower.

Looks like you could put a plinko insert in where the coins drop.

@ClawD00d

4 жыл бұрын

You're on to something.....

@kurisu7885

4 жыл бұрын

@@ClawD00d Well it very easily reminds me of the pushes in The Coin Game and those had the plinko parts in the back, and a couple of other things that might be a bit hard to rig up, but it looks like that thing is pretty much allowed to be a base.

Did you get a manual with your coin pusher when you purchased it? If you did, could you post a photo here on your video please? Mine was missing so I’m having to figure out all the wiring, parts names ect. Thanks.

Living in the Netherlands. I have been searching the internet for a while now to buy this machine in Europe. Never found one, has anyone got an idea where to buy one in Europe? For now, I am builing one myself. So thanks for uploading this vid! Helps me a lot!

Very interesting. Thanks

very cool such a coin pusher. beautifully made. Regarding the noise of the engine, it is better to use a windshield wiper motor from a car. as far as the drive is concerned, it has a lower motor speed and the required voltage of 12V is already available through your computer power supply. I hope my proposal is of some use to you. thank you very much for your explanation. Regards, Cees Kuppens, The Netherlands.

Thank you!

Interesting, thanks for that.

I have a question. I'm asking because I can't find a video on it anywhere. If I wanted to modify my coin pusher to where I can drop a bunch of quarters at once instead of just one at a time. How would I be able to modify it so I can do that?

Hi I know this is from two years ago, but I was just wondering how much did this cost? I'd love to get one for my home :) TY Michele

@ClawD00d

Жыл бұрын

I got this for about 1200 plis shipping back in 2020, but I think the price has gone up a bit. You can still find them on ebay for sale.

Congratulations, the video is very good, I'm in Brazil, I would like to assemble a Coin Pusher here, could you help me with this, would you give me the drawing of all the MDF pieces with the measurements, I would be very grateful if that's possible, thank you.

Plexiglass with vinyl sticker of your choice

could you list the dimensions of the coin pusher, I want to build one, Thanks!

I'm sure it is made of a thin printed plastic. That is pretty cool machine.

@ClawD00d

4 жыл бұрын

Thanks Christy! Yeah, the sign it made of plastic, looks like that clear sheet they use to use on projectors back in the day.

@beware_the_moose

4 жыл бұрын

@@ClawD00d That's called "acetate" and I think you can get some you can print on

@ClawD00d

4 жыл бұрын

T C this is extremely helpful, thanks! I take it must be printed with inkjet, as laser probably wont play as nice lol

@beware_the_moose

4 жыл бұрын

@@ClawD00d No I think it's meant for laser actually! I know about it because people use it to print out the design of PCBs that then go into a transfer machine, so laser is best for that!

@ClawD00d

4 жыл бұрын

Do you know of any websites that might be able to print one out for me? I measured the sign and its 6 3/4 X 22 inches

'Make It Rain' name sign in 3...2...1...

your motor has 2 black wires how did you wire it to your power supply ? was it one black to black one to white

@milenkosoe

2 жыл бұрын

He didn’t wire anything Edward, he purchased this machine. It’s $1200 new online, about $800 used. It’s called Silver Falls Coin Pusher. They are on eBay and a couple websites.

Is that lil box a mtg box ?

@ClawD00d

4 жыл бұрын

The orange one? I believe it was a Charizard trainer box.

@speetdragon

4 жыл бұрын

ClawD00d - Coin Pushers Oke thx

How to do you take off the quarter slot so you can put a lot of quarters at once?

@milenkosoe

2 жыл бұрын

You push the “skill stop” button and load as many quarters as you wish. That stops the metal slide from moving back and forth. ( I have my own machine).

it is a beautifull machine . they are way to expensive for me here in the nl

@ClawD00d

4 жыл бұрын

Thank you Juggler. I hear they have desktop coin pusher versions in the Neterlands. Ever run into one of those?

@juggieboy

4 жыл бұрын

@@ClawD00d yeah even those are hard to find. Most of them if they are online the big shops buy them in do very little work at them and then sell them for twice the money . Most ask around 350for a working table top .

@atlantis927

4 жыл бұрын

Living in the NL too, been searching the internet for a while to buy this machine in Europe. Never found one, has anyone got an idea where to buy one in Europe? For now, I am builing one myself. So thanks for uploading this vid! Helps me a lot!

@saitakuma

3 жыл бұрын

@@atlantis927 did you make it?

@atlantis927

3 жыл бұрын

@@saitakuma Yeah, still work in progress, I will make a vid on my channel when I am finished :). Now building the sled of the pusher (with the motor).

I want to build one...the link to buy one is dead

@RT1407-e8l

Жыл бұрын

They have them reasonably priced on eBay

neat

Used WD-40

woww

Some of what hes saying aren't really making sense, and hes not fully explaining a few things lol. I thought I was just tired, and kept missing things, but I keep rewinding it and still doesnt

You gotta paint some colors in there, on those flat white bits! I want a coin pusher, but it just looks so drab inside. A sad halogen light, scraped up metal slides, mirror, white countertop material. If i played that in my living room, I'd feel like I was in a moldy back corner of a liquor store! I'd have to paint one surface yellow, another blue, maybe an orange one. Get some life in there.

🤪