I would be the coolest kid in town If I owned this

@heavens.sorrow

Жыл бұрын

Same- and I'm only a kid at heart.

@MUzair-ye3po

Жыл бұрын

Then you should make it .

@magicwastaken

Жыл бұрын

Then own it he literally just taught you how to make it

@rudrakarith5888

Жыл бұрын

me also

@John-kk5xm

Жыл бұрын

In the town? Seriously, You would be the coolest kid the state

This not just a creativity, this is innovation

@En-bv8ns

Жыл бұрын

How is this an innovation?

@indranijayasinghe5243

Жыл бұрын

@@En-bv8ns what's the meaning of innovation?

@En-bv8ns

Жыл бұрын

@@indranijayasinghe5243 well, I used to be in a technical school and my teacher always said innovations are meant to be things that'll make the product better for humanity. But the general definition (pulled this from Google Collins dictionary) intransitive verb. To innovate means to introduce changes and new ideas in the way something is done or made.

@rizqiyaputra88

Жыл бұрын

@@En-bv8ns I agree with this state ... something small is also an innovation

@jestfulwallaby1048

Жыл бұрын

Evolution

I think some LED strips are addressable so you could make the wheels appear to spin faster than you are moving or even spin backwards while going forwards. One wheel in each direction. Or perhaps make the front half of the wheel white and rear half red.

@goku445

6 ай бұрын

Moon-walk-rolling wheels

Ok this is just absolutely awesome! This needs to be mass produced and sold online. However a different type of tire would probably be better than the hot glue.

@mysticabbagerealm

Жыл бұрын

What U recommend sir?

@nunyabusiness1248

Жыл бұрын

@@mysticabbagerealm They already have clear bike tires. I would suggest filling the clear bike tire with clear silicone.

@davi5867

Жыл бұрын

@@nunyabusiness1248 silicone e meio macio e se entrar um prego pode entrar agua e estragar as luz sem falar que não e pratico

@aratof18

Жыл бұрын

you could put a led strip to the sides of the wheels, it's not the same but I bet it'd work

@stevenr5149

3 ай бұрын

Hmmm. I wonder why no one has tried filling a clear bike tires with silicone yet? ;) @@nunyabusiness1248

Cool idea. Not only is it awesome, but it doubles as a safety feature for riding at night. Reminds me of something out of Tron.

@krisszalai

Жыл бұрын

Dont beleieve, you have to pay for something...

@luismartinez9969

Жыл бұрын

No pedalea ni 10 metros y se desarma el neumático, solo es un trabajo estético osea perdió su función primordial

@NightVisionOfficial

Жыл бұрын

Right?

@mcfourth

Жыл бұрын

@@luismartinez9969 still cool. And with his creative mind he made something cool. Can you?

@luismartinez9969

Жыл бұрын

@@mcfourth mi crítica no es por el trabajo artesano , es por la idea errónea del primer comentario el cual piensa que esa bici es funcional pero en realidad no lo es. La bicicleta fue transformada en una pieza de arte "cool" . Las luces no son funcionales y las ruedas tampoco ,esa bicicleta no podrá rodar más de 15 minutos sobre 20 km sin desarmarse . Estoy opinando sobre el primer comentario no sobre la bicicleta. Ahora te digo que es lo que pienso yo sobre ese trabajo: Yo entre a ver el vídeo porque me pareció un trabajo genial Luego ví el proceso y descubrí que no es funcional osea la máquina se transformó en una pieza de adorno para contemplar. Pero sigue siendo genial! (Cómo pieza de arte)

Now if you somehow manage to mix this with the hub-less bike we’d start having tron light cycles irl

@mubinzombadkar9112

Жыл бұрын

That would be bit easy to install in hubless bike rather than hubbed bike

@HKRN7670

Жыл бұрын

That would just be "out of the world" 😮😃😎🙇💥🔥

This is really cool and really well-executed! I especially liked the little hot wire jig you cobbled together.

How come I never seen this channel before, it is absolutely insane.

Dude, you're a freakin' genius, a master of creative engineering and craftsmanship, Mark Watney could learn a thing or two from you!

@franckylaglisseable

Жыл бұрын

C'est de l'arnaque

@krisszalai

Жыл бұрын

Thx

@luismartinez9969

Жыл бұрын

Solo le puso un difusor de resina en forma de rueda para la luz LED. Incluso soldó los extremos fundiendo con calor , esa rueda no duraría ni 5 minutos usándola cómo bicicleta normal, esa creacion es más como para darle una nueva vida pero ahora como adorno a una bicicleta ya desahuciada o abandonada en una bodega.

@B-M.B

Жыл бұрын

A bicycle wit led lights would be quite impractical on Mars while carrying a spacesuit and driving through sand... just want to mention that little detail..

@B-M.B

Жыл бұрын

@InterstellarSnow Alt Mark Watney, fictional character in the book The Martian - a wounded astronaut trying to survive on Mars while trying to reach a lander to escape from it.

This man has achieved possibly the 99% of the modifications that can be done on a bicycle and yet with that 1% he keeps amazing us since idk when. Since long years back.!! Amazing 👏

@DerekDavis213

Жыл бұрын

Is is possible the young handsome man in the video is not the true engineer or designer? It could be a 60 year old man with a grey beard. A man that is not so attractive?

@mintqo

Жыл бұрын

@@DerekDavis213 ..and does anything happen if they are?

@DerekDavis213

Жыл бұрын

@@mintqo Then maybe we are all being deceived. The true genius is hidden?

@thesock8739

Жыл бұрын

When that one teammate has all the cosmetics in the game:

@mdtuhin3521

Жыл бұрын

0

Yeah. The only problem is that transparent tires wear so fast. The "black smoke" is what gives durability to tires but it makes impossible to color the tires. That's why all tires are black at least on the contacting area. It would be cool if someone came up with additives to rubber that are close to black smoke and allowing for color. It could be applied to all tires including car tires. It would really boost creativity on car design. Still very cool idea!

@NonLegitNation2

3 ай бұрын

I believe Perelli already makes colored tires but they're for drifters, so they get colored tire smoke when they're doing burnouts or drifting around corners. Edit: it's actually Toyo tires that makes them.

@borrachoporrero9929

2 күн бұрын

my bike tyres are bright red. a company in florida makes them.

If someone can come up with a working set of transparent Tyres, this can revolutionize the cycle industry. Legit looks straight out of TRON LEGACY.

Using the nichrome as a cutting tool was a nifty trick. I was wondering how you were going to make an even cut along the whole tire.

@cherryxxl7046

Жыл бұрын

Hот nуdе$

I work at the local bike shop here in town... And i gotta say. This should be a thing thats mass-produced. not only is it fun and creative giving you the choice to further Stylize your bike, but its great for being seen especially during night time rides. visibly and being seen by cars is the number 1 priority.

@flymrpie1

Жыл бұрын

Bonus safety feature, tires with no grip made out of hot glue😉

@guestc142

Жыл бұрын

@Don't read profile photo.

@DespaceMan

Жыл бұрын

@@flymrpie1 not just that they wont last very long the wear would be bad, wet paths even worse grip. I thing it's more a novelty thing like for parades.

@GentleRainRobbert

Жыл бұрын

for a local bike shop i find it very dissapointing that you don't seem to disprove of fucking glue tires.. hello?

@bradcliff7099

Жыл бұрын

I totally agree with you, maybe with different compounds added to the glue and maybe some fibers along where the bead formed but yeah what a great thing to increase the ability to be seen at night. And what's with everyone saying these tires would be slippery? Do they sell hot glue tires somewhere already and have ridden on them to know? If they do sell and have ridden on them, then I must live in a cave! LOL

You should try using inner wheel suspension. Basically springs that act as spokes. I've seen it somewhere before, would definitely fix the bumpiness issue.

I'd love a commercially available version of this. It's wonderful.

@eduardowalter2022

Жыл бұрын

gay

@stowgood

Жыл бұрын

@@eduardowalter2022 no thanks m8 I'm not interested in you.

@goku445

6 ай бұрын

that's not allowed

Love it! There are some highly translucent 2-part RTVs available (perhaps you already thought of this) - but in case you didn't- might be something to explore. It could be reinforced with nylon fibers (or something) could be mixed in for added strength.

Put a thin good strong clear rubberized mold over those tires for riding comfort, and you'd have a great funding product to show to Shark Tank!👍🏽

Really cool idea. Just mad that as an engineer I did not think of it. Super easy too. But your editing skills are just outstanding

Really cool and a great safety feature for that pesky traffic that has trouble seeing us!

@krisszalai

Жыл бұрын

Hi Frank! Did You get the PS5?

@krisszalai

Жыл бұрын

@@frankstidham1439 No, it was a scam which was distributed by someone on behalf of Q.

@Koen030NL

Жыл бұрын

I think I would still get a 50 euro fine for riding without “proper” lighting here in the Netherlands.

@udirt

Жыл бұрын

If you drive with solid tires it's gonna be unsafe in itself...

@RaiZe-

Жыл бұрын

and now think why neon lighting for cars is illigal, and the question yourself why it would be legal for bycicels

Really nice! I think you could glue a layer of rubber outside the wheel (just where it touches the ground). Making it more durable and not slippery

@SYAAMLBB

Жыл бұрын

This is how company make a Rgb bicycle and sold it for $100(just guess) and thats how they raise a lot .even the rgb things cheap cost like $10 and the bicycle (idk)

I know this a pretty old video, but do you have a stl file for that battery holder for the wheels?

Yo that's crazy dude😱😱 Me: need more 'Blueprints" for that I need to make more like that🥰🥰

This could be really cool if the leds were addresable. So you could achieve light effect, where green always touches the ground and the rest is for example red. (some kind of additional sensor would be needed in the hub for this).

@gamefun2525

Жыл бұрын

Would be cool but that would be very tedious a task to achieve

@paisis123

Жыл бұрын

@@gamefun2525 Wrong. Just chose a different controller and WS2811 Leds. You can have all the awesome effects via the Bluetooth controller. SP110E

@codyrap95

Жыл бұрын

Or you can use a gyro

@D4rkS7der

Жыл бұрын

@@codyrap95 or you can use the Jayro

@D4rkS7der

Жыл бұрын

@@paisis123 The thing is, your controller would need to react to the actual wheel rotation. That would require some kind of arduino skillz.

This is great. Looks cool, bonus safety feature for night riding, and never have to worry about getting a flat. I’d only install this on bikes with front and rear suspension though. If not, you’d feel every tiny bump, and you’d end up warping your rims fairly quickly

@Davmm96

Жыл бұрын

dunno, could be engineered to withstand the abuse. I mean they make rollerblade LED wheels with a built-in magneto to generate the power...

@elizabeth-2213

Жыл бұрын

@Don't read profile photo No one cares enough to click your profile bro. There's only a million of you w/stupid names like that.

@mohe81

Жыл бұрын

But don't you ever park your bike in the sun! :D

@ichigokurosaki-ei9sq

Жыл бұрын

@Don't read profile photo 😘

@ringosis

Жыл бұрын

A bigger issue is I seriously doubt the durability of the seam where they just heated the tyre up and stuck it back together, and you've got no bead on the tyre (a tyre bead is a hooked part, often reinforced with metal, that clips under the rim to stop lateral forces rolling the tyre off the side of the wheel). Solid tyres like this do exist, but this isn't how you make them. I would be extremely surprised if that tyre stayed on that rim for more than a few weeks. One too sharp turn and you are losing that tyre.

This is really cool! Also, for the people who dont have the tools to do this, u can buy lights made for bike tires :)

This is beyond Cool. This is Wicked Awesome. I wish I had this bike when I was a kid in the 90's. 😎👍💯

If I recall, Goodyear actually made prototype glowing tyres back in the 1950s for cars... This is essentially a modern small-scale interpretation of that tech and I dig it.

@lestefani9517

Жыл бұрын

1950s? Probably just radioactive paint

@julmdamaslefttoe3559

Жыл бұрын

They did indeed, Donut media did a up to speed of forms on it, And turns out they where highly dangerous as they lacked traction of traditional rubbers.

@DigBipper188

Жыл бұрын

@@lestefani9517 nah. they actually lit up. There is one car in existence that still has a set on it called the "Golden Sahara II"... If you haven't seen it, it's a very interesting bit of motoring history

@billythecat

Жыл бұрын

@@julmdamaslefttoe3559 oh so the problem of having rgb leds inside the tire is the lack of traction?

@julmdamaslefttoe3559

Жыл бұрын

@@billythecat wasnt LED's inside the wheels that mattered but the type of rubber that was translucent enough was

Love the idea, if only there were real tires out there that is translucent and durable.

@pazkual1

Жыл бұрын

What kind of tire is this?

@phattube81

Жыл бұрын

@@pazkual1 glue sticks, you should see his other video how he made it :)

Genius with the hotglue tire treatment!

Holy moly. It can really put the light colors under the wheels. Wow, dude, that is so awesome. I am very excited.😃😃😀😀😄😄😁😁

Technology Connections made a video about illuminated car tyres not so long ago. But these look even better, because they're not blocked from view at all. Very nice idea 👍

@Goodgu3963

Жыл бұрын

Can you link this? I can't find it on his channel and that sounds super interesting.

@DanRustle

Жыл бұрын

they already have those in the custom mod scene

Very cool idea. Sadly only possible for single-speeder or without inner-wheel motor, but nice ^^

@matthewjmullin

Жыл бұрын

Not true.

Everytime I see your video, i think nothing could be more crazy and interesting than this, but you never cease to amaze ❤️

How is this type of customization not mainstream yet? I would definitely go back into riding if this is available on the market!

@lcdude513

Жыл бұрын

What's funny is something similar to this used to exist back in the 50s but for cars and they got banned because people would get distracted by them and crash.

@isaiahlowe3788

Жыл бұрын

​@@lcdude513that seems like a them problem 😂😂

@whateverbikes

Жыл бұрын

Because solid tires ride absolutely horrible, and normal tires can't be made translucent (because there's a lot of layers and thread in the rubber to give it structural strength). And because ultimately it is just a gimmick that would quickly lose its appeal.

@vinkniv

8 ай бұрын

Because it's illegal in most countries. It's distracting automobilists.

@832738

8 ай бұрын

@@isaiahlowe3788 it sucks that America solves the stupid people problem by baby proofing the world

Amazing! I think you could make a lot of money selling these wheels to the public. I would definitely buy a set

This is awesome. Would be fun to have the color connected to the speed.

This cycle looks incredible now !WELL DONE!👍

That’s very cool but I wouldn’t think that those tires would be very sturdy….

I would put actual tire tread on the outside so they last normally and just have the sides glowing. They would last way longer that way and you would still see the lights from directly in front and behind.

@magi144

Жыл бұрын

Or just add some kind of strengthening agent to the glue

@KalijahAnderson

Жыл бұрын

@@magi144 There isn't much you can add to it that would increase it's wear resistance without just using something different.

@bradcliff7099

Жыл бұрын

You would obviously see the glowing part from either side of the bike doing what you suggested not the front or back.

nice. now make the rear tire light red when you brake.

You can buy clear bike tires in all sizes. Id suggests filling a clear bike tire with clear silicone. It would work way better, and it's cheap and easy.

Watching this as a bike mechanic makes my skin crawl, but nonetheless still pretty cool 🤣

You can use dynohub instead of batteries, that was my first thought. Anyway, great invention👍🏻😀 My second thought - will your wheels last during hot summer? 🤔 I think it will melt on hot road.

Any way I could get the 3D file for the mold? I am struggling to find wheelchair tires that are airless but also not completely smooth road bike tires that slip when it's the least bit wet. I desperately need to make some of these!

Not only looking awesome, these would actually be very practical at night being visible

@user-bk5pz7vy9p

7 ай бұрын

😊🎉🎉🎉😢😢😢😢😢😢😢😢😅😅😅😅😅😅😅😅😅😅😅😅😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

I'm curious as to the traction of the tires, and if it is practical enough for safety vs distraction. Great example of rgb tires, can you make a durability test video?

@kuchikibyakuya7697

Жыл бұрын

Lol dont be karen. He just did it for a videos. Do u think he will use that lol

@totalhydration5240

Жыл бұрын

@@kuchikibyakuya7697 How is this karen behavior? He's not really criticizing something for his own gain. He's thinking of the safety and durability of the tires. It's questions like these that could lead to thinking about ways to improve something like using better materials or how to tweak the design.

@kuchikibyakuya7697

Жыл бұрын

@@totalhydration5240 i don't remember asking for ur bullshittt opinion benchod.

@Hozzizay

Жыл бұрын

Like any word that starts of with a granular use-case but has positive or negative feeling to it, they can degenerate into being used to simply mean something someone likes or doesn’t. I’m not a fan of it but it often happens. In this case the user did not like the question because they felt it was obviously irrelevant to practicality and wanted to express an insult due to their dislike for something obviously not having a long life being questioned. However , in my opinion it was a good question and asks specifically about traction quality itself and durability , which could have a more interesting answer than ‘he won’t use this again so what does it matter answer. The user who used the word Karen uses a perceived insult and then tries to resolve their assertion with an tone of an assumptive question🖲️

@kuchikibyakuya7697

Жыл бұрын

He never put it in the market. So don't worry about it benchod

Excellent idea and execution! But how do you get the tires so tight on the wheels without them coming off when you take a corner?

@bradcliff7099

Жыл бұрын

Well they were formed with hot glue sticks. so basically when he poured it into the mold it filled every crevice on the underside of the rim , so I'm going to guess it essentially glued itself to the wheel when it finally set up and hardened.

@MartinTedder

Жыл бұрын

@@bradcliff7099 I would have a hard time trusting it...

These were on the market in 2007 . The batteries were inside the tyre though and were more waterproof than this setup . The wheel centre core would have been expensive to produce due to the type of oven needed and mould production costs being high . The man doing this project would have borrowed the moulding equipment .

Thats FFFFIIIIILLLLTTTHHHHYYYY !!!!!! But that tire work on surfaces besides paved & smooth? Also length of time b4 tire tread is destroyed ???

U r genius! Always love to watch your creativity & innovation!💐

How can you think like that , Your creativity level is amazing ❤️

I’m about to turn 45 and this is fucking amazing. I want a set.

Awesome but the question is How long can the tire last?

@amirthecreator2545

Жыл бұрын

One drop

@FJBsaidcornpop

Жыл бұрын

This is a show bike not a go bike.

rgb gives you +50 human power

Great! Now upgrade it to use pixel LEDs so that it can display messages and other effects while riding. :)

@pbilk

Жыл бұрын

Monkeylectric did this but they have gone MIA (missing in action) since 2020.

Man ,this its Amazing idea ! 😲

Ha! Someone saw the video on YT about the Goodyear colour changing tires from the 1950's and said "I can do it better". Well done!

Awesome. Those wheels won't last long I'm afraid but that was not the goal. Great work 👍.

@fatboydiesel8270

Жыл бұрын

I remember seeing inserts similar to those so you wouldn't need to inflate your tires. Those could definitely see such use to replace inner tubes and never worry about flats again.

@CB-rv2lj

Жыл бұрын

how often are you riding a bike and how far? most people not very much unless you dont own a car and are in a major city and thats your main mode of transportation. for most a bike ride is only on the weekends, brought camping or on vacation and ridden for less than 10 miles.

Nice, now make it last for longer then 20 meters. :D But tbh, if someone would manage that, that would be a game changer for bikes, not only does it look amazing, its also a large safety net since you can be seen from larger distances especially from the side.

@4r1ga70u-irl

Жыл бұрын

yeah i wonder too which this is not production state why its not a thing to have that. is it maybe too distractive for the streets ?

@Mr_ravee_

Жыл бұрын

@@4r1ga70u-irl the pressure on the tire would kill the leds within a few meters of riding.

@skategamehub3111

3 ай бұрын

drivers would start complaining and saying its a distraction lol 😆

Why not just install the RGB LED strip onto the rim, then put the printed mold on and cast the tire with the led in it? Encapsulate the led in the tire?

Back in '61 Goodyear thought of a groundbreaking idea of illuminated tires. But that unfortunately did not came into fruition. Now illuminated tires on bikes use LED. This explains the perks of innovation.

This reminds me of the 1950 glowing tires they never thought would be popular but are now wanted by everyone.... They should definitely bring that back, that would be awesome.

@LuneyTune72

Жыл бұрын

It wasn’t that nobody wanted them, it’s that the lights overheated and were unsafe.

@ChampagneAndRipple

Жыл бұрын

@@LuneyTune72 Also wrong, it was the material used to make the tires glow that wore it fast and weren't as reliable as the black rubber tires.

@viciousyeen6644

Жыл бұрын

It’s just obviously a 1950s technology problem, we got so much they hadn’t had back then.

Would be really cool if you could make the colors change with the lights of an intersection. While you wait for it to go from red to green, if your tires would go from red to green also simultaneously with the intersection lights. That would be awesome.

@bradcliff7099

Жыл бұрын

He can already do that with his controller. He showed you changing colors all he would have to do is do it when he rolled up to a light by manually pushing the buttons at each light.

@CT2507

Жыл бұрын

@@bradcliff7099 Yea, thats pretty cool.

@richardpendley3454

Жыл бұрын

Man man man right fn on idea

@CT2507

Жыл бұрын

@@richardpendley3454 Right. I would love such a bike! :)

3:36 most interesting moment but lasts only 3 seconds 🤣

@Macaddress-kt3vr

Жыл бұрын

👆👆Nice comment' Just won a suprise' Write above Handle to acknowledge🎁

Holy shit! Dude! You are the coolest cyclist I have ever seen!

This needs to be marketed mate. Imagine how much safer it would be for cyclists with front and rear lights and these. Could even make the rear flash red when braking?

How was the pot clean up like? Was it stored away as the “hot glue pot” for future uses 😅 or did were y’all able to clean it out?

Super, félicitations pour cette réalisation 😀

I need to change my tires quickly but I lime the color changing bike. Also do one for bedroom color light changing. But I like the video. And it is a cool idea.

This is the best thing I’ve seen in a long long time. Makes me want to own a bike again.

I love stuff like this as it can really dress up riding events like the type your local town or city puts on. The problem with these types of things is that, in my personal experience, none of them are properly balanced and just wont ride well above anything like a slow cruise. undeniably cool looking but I have yet to ride one that is properly engineered for use on a wheel/ tire assembly.

@josephhacker6508

Жыл бұрын

Have you ridden a light up wheel bicycle?

@lawless911sc

Жыл бұрын

@@josephhacker6508 yes several designs. All were add-on/ bolt on solutions ranging from hub central to spoke mounted to wheel mounted lights. I have never ridden one with a clear rubber tire though. Balanced or otherwise.

@bradcliff7099

Жыл бұрын

I have to ask with this being made by using a very uniform 3D printed mold, how would it not be uniform and balanced when the hot liquid is going to seek and find level before it has time to cool and set up? Everything you say you tried doesn't sound like it would be very uniform in spacing being add on/bolt on things. where this is uniform in length and symmetrical being on the underside of the rim without overlapping. Furthermore I don't believe he made this to market them I think he did it as a challenge to himself and a goal to see if he could come up with an idea to get it to work and to say hey look at these I'll bet you don't have tires like mine. Just more of a thing like when he finally made a set that actually worked to be able to say when asked, "Why" he can say why not and because I can, and then chuckle a little after saying it.

The Q literally changed from a diy er to a bicycle mechanic 😂

The 1960s Goodyear multi-color tire idea has finally been made practical. See history of Neothane tires.

The cable join heatshrink doesn't keep water out very well and the heatshrink was scorched slightly so a heat gun is a wiser choice .

This man is headed towards becoming very rich because of his invention this is just too cool for school! I would love to have something like this and I don't know too many people that ride a bike that would not love it! And to think we were there in the very beginning

@schwuzi

Жыл бұрын

Lol. Don't you think tires are made from rubber for a reason? A tire made from hot glue sticks is not that great at being a tire. Try riding that bike in the rain or on a hot summer day. The asphalt will reach temperatures of over 50°C and those tires will deform.

0:20 First Make A Plate To Put Your Cookies

@pratibhakushwah6631

9 ай бұрын

यमरदररललव

WHAT COLOR IS YOUR WHEEL? 👨🏻‍🦲

I ordered exactly the same led and wanted to do nearly the same but not with a bike XD. Btw really nice video cut!

Funfact:- I Think This Video Viral Soon

@alex.61204

Жыл бұрын

By all means , it should viral .

@arnavchandra2567

Жыл бұрын

Fax

1:34 can we appreciate how smooth this was?

Seems like this would be a hard ride and you would feel all the bumps maybe some shacks? I love this though looks sick.

Arent those wheels kinda hard biked though since thy weight more without the holes? Just curious, your inventions awesome!

This guy is literally amazing 👍👍🤯

"Yeah im coming down now." "Where are you dude?" "Hold on let me think of a tire color."

Q you better patented that really quick man... that is cool... i like to have a pair of those myself...

see index 2:38 there's magic going on... you'll love it!

Great idea! I want whells like this too for my bike

@someonesomewhere9486

Жыл бұрын

Whells?

@elhoward7440

Жыл бұрын

The question is, how much would you pay for two wheels like this?

My only worry how long will the tread last for it

LED’s make anything better. Awesome work.

This is the single... most amazing thing I have ever seen in my entire life. From the application you used to make the battery casing for the LED light strips to the metal thread you used to cut the tire. The only thing that would make this any better is if you used 'Lifx' light strips.

WOW! I just have to ask, how durable is are the hot glue tires? I thought they would just crumble the minute you put weight on them.

@someonesomewhere9486

Жыл бұрын

is are?

@quantifiedamalgamation

Жыл бұрын

@@someonesomewhere9486 in or?

@someonesomewhere9486

Жыл бұрын

@@quantifiedamalgamation what?!? in or what?

@botirlasorin

Жыл бұрын

@@someonesomewhere9486 on them

@someonesomewhere9486

Жыл бұрын

@@botirlasorin what is on them?

sometimes i loathe you for making such great projects. cause i cant make one like this even if like 😂😂. great ideas !!! love it

This fella reinvents the bike so easily

Парни очень круто! Вам надо потом музей открыть со своими изобритениями

It wouldn't be a good idea to use this bike on hot days, but I still found the work done creative and sensational. Congratulations!

The colors are awesome, but I am not sure about the tires themselves being very comfortable, lol 😉

This is epic! You should patent the idea and sell them. You would make millions.

Andar no escuro com essa ideia seria uma mão na roda 😄

@dannbrown

Жыл бұрын

Badumtss

Nice, I like this bike :> One day i maybe make it