What to expect when installing Lancer aftermarket tail lights (VLAND Audi Style)
Link to these tail lights on amazon amzn.to/2EfAinZ
Little install video with things to expect while installing aftermarket tail lights.
Wanna help support and get badass merch check the link below! Shop 👇 www.etsy.com/your/shops/hasap...
shop.spreadshirt.com/thesnyds
Links to where I buy my Vlogging Gear and Car parts!👇
Tripod amzn.to/2kgqNJ8
Cannon G7X Mark II amzn.to/2KJRwch
GFB BOV amzn.to/2LkEVwZ
Vvivid Vinyl 5x5 amzn.to/2IFYsus
Vinyl Kit amzn.to/2LkjZ9I
Pinstripe amzn.to/2LnaSVo
Roof Molding Clips amzn.to/2LkmDw3
VHT Caliper Clear coat amzn.to/2J2lc7j
VHT Caliper Paint amzn.to/2GE9Dxy
The Absorber amzn.to/2GDuJfL
Link to front lip-ebay.to/2E622XA
Link to side skirts -ebay.to/2J54mSh
Ralliart Banner ebay.to/2pQ4vAS
Vortex Generator- ebay.to/2pSf5GZ
Rally Armor Mud flaps- amzn.to/2sDlEi3
Seat Belt Pad- amzn.to/2sEjT40
Eibach Springs- ebay.to/2J6kyWW
Wheel Spacers- ebay.to/2HiMWQ4
Window Rain Guards- ebay.to/2JdpOIv
Audi Vland smoked tail lights - amzn.to/2EfAinZ
#auditaillights#lancer#evox
Пікірлер: 194
Your install videos still help more than 3 years on man, thank you. Just installed mine, took less an hour and it all went off without a hitch thanks to this video.
@TheSnyds
2 жыл бұрын
That's awesome. Glad it helped you out!
just ordered some vland audi style head lights, so hyped for when they get here
I bought the Spyder LED tail lights on my Ralliart and I absolutely love them, reay easy to install!
Honestly, I bought my Lancer because of those head and tail lights.
@xXxUrbanNinjaxXx
5 жыл бұрын
its funny how the custom headlights make the car look dumb expensive
@GabrielIgnacio
5 жыл бұрын
What Lancer do you have? The regular variants or something like the Ralliart or even a full blown Evo?
youtube actually helps me with recommended,I was thinking about buying some today
@TheSnyds
4 жыл бұрын
Funny how that works huh
Just installed mine. Helped so much thanks buddy . They look so good . Got dark tint. My car is rally red :).
@TheSnyds
5 жыл бұрын
No prob man! Always a fan of rally red
protip: just tap the threaded bolt attached to the tail light and keep pushing it through. Much less risk of damage using the flat head. Should use plastic trim remover tools, also reduces risks.
Thanks, I followed this video and got my installed. The wiring/splitting wires was defiantly the hardest part.
@TheSnyds
2 жыл бұрын
You got it done though right!?
My tail lights are coming in today! Going to be using your video as a guide, swear i've watched it 7 times so I know how to do it by memory. Will post a reply when they're installed!
@TheSnyds
2 жыл бұрын
Nice! Have fun with it
Installed mine yesterday. Thank you for the video! My dad and I were stumped until we found you.
@TheSnyds
4 жыл бұрын
No problem!
i knew you were gonna get Audi style !!!!!! love it im getting that too bro
@TheSnyds
5 жыл бұрын
I was happy with my stock lights, but couldnt pass up the deal! And now that they're on I love them
Way better, looking pure🔥🔥
It’s Xmas night and the gf wanted me to fit her new lights tonight 🙄 this video was really helpful cheers dude 👍🏻
@TheSnyds
3 жыл бұрын
Glad it helped brotha!
Super clean💪🔥
The polarity of the led is important, where you had to use the socket from the ofher bulb was likely had the vland connector needing to be flipped 180 degrees
Hey wassup man good video! Thanks!
Literally installing mines today 😆
It would behoove you😂 lights look dope bro hope to see more evo mods I just bought mine so you just got a new subscriber
@raychavez9441
5 жыл бұрын
also do you have Instagram so I can follow the build
@TheSnyds
5 жыл бұрын
Semperfiyaoyas
@WhiteSupreme
4 жыл бұрын
That's not an Evo. It's a Ralliart.
When I saw splicing job actively cringed go to Harbor freight and buy a crimping set is like $12 it comes with the crimpers wire strippers and wire cutter it also comes with grommets cable ties and cable clamp along with a bunch of AWG items
woooow i loved
Looks Dope Buddy
@TheSnyds
4 жыл бұрын
Thanks man!
I only have the vland Audi style headlights cuz mine is the RA sportback 🙁, but u should get the headlights next!
Just bought both heads and tails! great video man, props for clarity. im scared af to ruin something lol
@TheSnyds
5 жыл бұрын
Hahah I feel you man. That's why I over kill it sometimes in detail
Been saving install videos of these tails as reference for when I finally get around to ordering these taillights. Hardest install looks to be just running wires everywhere and splicing which isn't too difficult. Saved yours specifically since you kinda go into more detail where you placed the resistor, since the other vids I had saved never really touched up on that. Now, just gotta decide between smoked or non smoked...
@TheSnyds
5 жыл бұрын
What color car?
@GabrielIgnacio
5 жыл бұрын
@@TheSnyds Octane Blue Pearl. Part of me wants to go smoked but being cautious considering tinted tails aren't exactly legal in Texas.
@TheSnyds
5 жыл бұрын
Technically they arent tinted haha. You can clearly see the lights with no obstruction to view. I think thats what they really look for
@GabrielIgnacio
5 жыл бұрын
@@TheSnyds True true. Just erring on the side of caution. Already had a cop or two bug me about my rear plate lights being 'very blue' and my fake nagasaki plate I keep on the rear windshield as a decoration of sorts. Then again, that was around Austin the time those happened and I don't even drive anything special lol
@AdonisKeef
2 жыл бұрын
@@GabrielIgnacio put an American flag sticker somewhere on your car and they’ll leave you alone lol guaranteed.
I like that.
Nice Buick in the garage!!
@TheSnyds
4 жыл бұрын
Haha thanks. Its my pops
Nice
Hey man, what did you do to solve the first isue? I have the same
These upgrades help car owners to keep their cars always in the modern car look and working effectively.
@TheSnyds
8 ай бұрын
I can def agree
I ordered just the same ones. Was so sick of the red taillights, it just looks like crap on a black car. Very curious how its gonna look. Thanks for this very helpfull vid.
@TheSnyds
4 жыл бұрын
No prob. Hope you enjoy them!
@Tysxno
3 жыл бұрын
I feel the same about mine haha.
Nice video man, I am just about to buy some and was curious after nearly 12 months are they still working fine?also I see in the comments a lot about the reverse light / camera issue, is the resistor your talking in the comments the black box you put in the boot? or is that something you have to buy separately?Cheers man, they look sick. going on my 2017 black edition (black)
@TheSnyds
4 жыл бұрын
Gonna have to buy an additional, besides the lights cutting out after 3 secs no issues
Good install tutorial bro! 👍 I installed mine but my reverse lights are red not white. Would anyone know what may be the problem I’ve been told that red is fog light and something may be wrong with the wiring but I’ve redone everything twice still shows up red
whats that box for i bought a second hand set and i dont have the box and my short wire only has 2 connectors
I have a question...what if any one of the bulb in this stops working. Is it fixable or do we needa replace the whole unit?
hey man i was 211 and 214 too! semper fi
@TheSnyds
4 жыл бұрын
Nice! Small world and semper fi
reckon you could do a video on how you got the regular chrome part of the outside of the grill to the black? that would be seeet as if you could!
@TheSnyds
5 жыл бұрын
Actually did one a long time ago haha. Check my ralliart playlist!
@jacobleiper
5 жыл бұрын
oh mad, legend thank you
buddy where does the green and red wire connect?
Has anyone replaced the little sequential indicator/turn signal LEDs? 2 of mine are out on each side.
Was just wondering if these would fit on a 2011 lancer sx, I don’t know much about lancers since it’s my first car and I’ve been eyeing these lights for a while now.
@TheSnyds
3 жыл бұрын
They should work.
hey there I got a Mitsubishi lancer and I'm trying to install my subwoofer but when i hook it up to the connector in the back it doesn't work any idea's
i know we use ESD tape on connectors!....Great install
@TheSnyds
5 жыл бұрын
Wanna mail me some haha
Just installed these same lights in my car (looks sick with the mercury gray). If it weren't for your vid here, I wouldn't have noticed that the profile of these lights juts out more than the previous tailights which fit flush to the trunk of the car. The more edgy outward profile is very nice. Thanks for the video!👍
@TheSnyds
5 жыл бұрын
No problem!
I put these on but my license plate light don’t work anymore :/, any idea why not?
man its 2022 i bought mine tried to install them somehow only the outer right one is turning on the other 3 dont what did i do wrong .... help
Good choice in lights. The Audi style taillights are awesome. Are you going eventually get the Audi style headlights?
@TheSnyds
5 жыл бұрын
I actually love my blacked out stock so most likely not haha
@velladune1
5 жыл бұрын
Right on. The stock lights do look nice. I mainly like the DRLs that are on the Audi headlights.
@TheSnyds
5 жыл бұрын
@@velladune1 same, plus everyone runs them nowadays
@velladune1
5 жыл бұрын
That is true. Crossing my fingers that us Sportback peeps get our start up on the Audi taillights. I'll be waiting on your next mod. 👍
@TheSnyds
5 жыл бұрын
Yea I feel for you sportback guys, and sounds good! 🤙
Hiya buddy I'm from uk and looking for ralliart back bumper cant find any. As in the uk they have the hatchback only. And I need the 4dr one. Wud ringing Mitsubishi help me at all.
@TheSnyds
4 жыл бұрын
I mean I would def call. They could at least lead you in the right direction
Did you need resistors for the reverse lights? I have these installed on my Ralliart from the previous owner and my reverse lights stay on for 5 secs then turn off. Some research is saying I need to install resistors..... How true is that?
@evobby502
3 жыл бұрын
idk if you saw but he actually has a video doing this. I came from that video he just uploaded it last month ! hope its not too late
For the outer taillights, mine have like a 1 inch gap lol, yours looks so flush?
@TheSnyds
3 жыл бұрын
Talking about gap as them sticking out or?
Is there a certain connection for the turn signals, everything works except that?
@TheSnyds
2 жыл бұрын
Been years since I put them on man, but I think it was just the ond
Hi there i am just upgrading my tail lights to these ones . But would you tell me how’s your sub connected ??? I bought one separately but it doesnt have sound . Any suggestions ??? Did you installed an amp or was the sub stock on your lancer ?
@TheSnyds
5 жыл бұрын
It came stock brotha
@jairoguzman4631
5 жыл бұрын
Would you please , take a short video or a clear pic of the am you have for that sub? It must be under de passenger seat or the driver .
What do you think those will look on a red evo??
@TheSnyds
5 жыл бұрын
I've seen them on red evos before.
I JUST GOT ONE FOR MY 2014 RALLIART AND ISSUE WITH REVERSE LIGHT/ BACKUP CAM GOING OUT AFTER 5 SECONDS EVEN THOUGH IM STILL IN REVERSE, ANY ISSUES LIKE THAT?
@TheSnyds
3 жыл бұрын
Yup and I have a video on my channel that fixes it!
Did you have any water leaking issues from the trunk's direction to the outside lights? I own a Lancer which has pretty much the same body but they don't seem to fit perfectly on the body. I sense a little whole between the body and the taillights just right above and next to where the screws are.
@TheSnyds
3 жыл бұрын
Naa no leak issues here. But your correct we share the same body
@LostinGaming0
3 жыл бұрын
@@TheSnyds Alright. However I saw when you took out the factory lights that it was water inside already. Am I right? :P so maybe some water do get in even with the factory lights. Also I saw that the socket had some water drops so I'm guessing its not a big thing
@TheSnyds
3 жыл бұрын
@@LostinGaming0 yea water gets back there, but it's not going to hurt anything
@LostinGaming0
3 жыл бұрын
@@TheSnyds Alright then I'm not concerned that much lol. You own a 2008 Mitsu right? Have you had the C2116 ABS power issue maybe?
@TheSnyds
3 жыл бұрын
This is a 2015 ralliart.
Manda o link do Som
What do you have for exhaust?
@TheSnyds
5 жыл бұрын
Ultimate racing CBE
Does it has fog lights? My stock lancer x has fog lights..I don't have double reverse and here the laws are very strict about the fog lights
@TheSnyds
5 жыл бұрын
Yea it has fogs
@thej531
5 жыл бұрын
Mine didn't come with fogs..on my fogs it lights up a reverse light..
Where can I buy them
@TheSnyds
5 жыл бұрын
In the description box man!
Do these work with a 2017 lancer es
@TheSnyds
4 жыл бұрын
They should work. Same wiring
Are these compatible on hatchback lancers?
@TheSnyds
4 жыл бұрын
Sorry but no, they have a different tail light.
Hey man wondering if you have a had similar issue as me. I’ve bought these vland tail lights from Amazon with the resistor already connected in the red and green wire. Anyways my issue is that all my lights work (signal,reverse, third brake light, plate lights) beside the running lights and brake lights don’t even wanna turn on at all. Everything is connected properly so I don’t know what the hell my issue is I’ve tried forums but can’t find anything.
@TheSnyds
3 жыл бұрын
So it doesnt turn on at all or does it cutt out
@dragonsmoney1311
3 жыл бұрын
Just don’t turn on at all. The other lights are completely fine
@TheSnyds
3 жыл бұрын
If they are brand new Id suggest calling vland and see whats up.
@dragonsmoney1311
3 жыл бұрын
End up being something stupid 😂 one my ballast plugged in upside 😂 and to think I was about to return them lmfao
@TheSnyds
3 жыл бұрын
At least you got it working!
For me when I put the car in reverse the lights turn on and the back up camera as well but after 5 secs they both turn off. Have you ran into this issue? Any suggestions?
@TheSnyds
5 жыл бұрын
Yea thats normal beacuse of the power the LEDs require. I believe a resistor helps with that
@chriscanete70
5 жыл бұрын
I just installed the Vland taillights and yes the back up camera only turns on for 5 sec after it disappears, I installed a resistor and fixed the issue!
@ralliartx1
5 жыл бұрын
@@chriscanete70 please explain to me how and what resistor you used??? I'm having the same issue and would really appreciate the help!!
@GabrielIgnacio
5 жыл бұрын
@@ralliartx1 The VLAND headlights almost always come with the resistors. Contact them if they didn't come with one
@ralliartx1
5 жыл бұрын
@@GabrielIgnacio were all good now guys, video on my channel on how to install the resistor to make it function!
What kind of Sub or speaker is that
@TheSnyds
4 жыл бұрын
Its the one that came stock. Rockford Foagate 10' sub
Can I buy a replacement resistor?
@TheSnyds
3 жыл бұрын
Sure can. Well I ended up addkng another
Does this fit on 2016 mitsubishi lancer es?
@TheSnyds
3 жыл бұрын
Its compatable
I have an 08 lancer gts 2.0 litre, anyone know if these will fit and work the same?
@TheSnyds
4 жыл бұрын
Yes they would work
I installed mine! Unfortunately the reverse lights and camera only work for 3 seconds then nothing. Did you have this problem?
@TheSnyds
3 жыл бұрын
Yup. Just posted a video on the fix!
@rabbitnz8072
3 жыл бұрын
Awesome, easy fix. Thanks for your help
I’m installing now and my left side doesn’t light up help what did you do to fix?
@TheSnyds
4 жыл бұрын
I wish i knew the answer! I just unplugged and replugged..
@tiagocosta4774
4 жыл бұрын
A mate of mine has the same problem right now, if u figure out how to fix it let me know
Are ya gonna change your headlights as well?
@TheSnyds
5 жыл бұрын
As of right now, not in the plans
@jrc5001
5 жыл бұрын
@@TheSnyds ahhh booo i was hoping that ya are
@TheSnyds
5 жыл бұрын
@@jrc5001 haha sorry brotha
@jrc5001
5 жыл бұрын
@@TheSnyds all good just waiting for the next upload
So I did everything like the video shows but reverse lights arent working? Any suggestion
@TheSnyds
5 жыл бұрын
Not working away all or cutts out?
@arodriguez29
5 жыл бұрын
The Snyds same here they cut out
@tylermetz8715
4 жыл бұрын
The same thing is happening to me. Not working at all
@jobriathburn
4 жыл бұрын
@@TheSnyds not working at all
@jobriathburn
4 жыл бұрын
So I bought a second set for my EVO . . I think I got this one right, so I'll go back to my GT and redo before shipping it to my son . . What confused me is our wires werent the same at the ends
any chance you could draw up a diagram?
@TheSnyds
3 жыл бұрын
Theres some online. Or if you visit the vland website
Hey man I have the same lights but my reverse light goes off after 2 sec and the rear view camera also can, someone help me? It's the second set I got!
@youwhatmate8804
4 жыл бұрын
metoo6161 I have the same issue mate, thinking about going to vehicle electrician see if they can fix it, have you tried anything since
@kapiltak4672
4 жыл бұрын
You need to add resistors
@metoo6161
4 жыл бұрын
@@kapiltak4672 did that, too bro nothing worked the lights even managed to make a airbag failure code!
@kapiltak4672
4 жыл бұрын
@@metoo6161 i can take a picture of where exactly and how my resistor was wired. Are you getting the Airbag System maintenance required?
@metoo6161
4 жыл бұрын
@@kapiltak4672 yeah man but I have an EU Evo don't know if it makes any difference?
No gasket needed?
@TheSnyds
3 жыл бұрын
Nope. Been running fine to this day
Literally cannot even get my lights removed. Took out the two screws and it’s locked in there somehow can’t figure it out
@TheSnyds
4 жыл бұрын
Have to really pull man
@mistert780
4 жыл бұрын
The Snyds worked lol
@mistert780
4 жыл бұрын
The Snyds do you know why my right turn signal won’t work? It blinks super quick. Everything else worked
@TheSnyds
4 жыл бұрын
May need a relay
@mistert780
4 жыл бұрын
The Snyds sheesh. I just kept reinstalling straightening the wires up and eventually the turn signal worked but then the brake lights didn’t, but eventually got everything to work. Just wiggles the wires a lot lol thanks
I am by no means an expert but those wires shouldve had any kind of plastic cover on them or at least just wrap electrical tape around them to prevent chafing on the frame. As well where they were spliced shouldve at the absolute minimum been soldered and shrink wrapped instead of just twisted together and taped. This is going in a moving vehicle which will jostle everything around quite a bit.
Did you reverse camera work after install?
@TheSnyds
5 жыл бұрын
It works for a couple secs. Adding a resistor will fix that
@tylerr4213
5 жыл бұрын
Ok.
@alexismanaenmolina3969
4 жыл бұрын
@@TheSnyds where did you add the resistance and what is it
dont forget to tell the people to disconnect the battery before u do all this
@TheSnyds
3 жыл бұрын
Good point
Lancer Taillights are really weird...Best to leave them alone, it throws TC control errors for whatever reason if tempered with.....
Do you have Instagram?
@TheSnyds
5 жыл бұрын
Semperfiyaoyas
IYAOYAS
@TheSnyds
4 жыл бұрын
Oh hell yea! IYAOYAS haha
@MichaelTEpicMikeSkills
4 жыл бұрын
The Snyds I found this video because I’m installing the same lights and saw your patches and saw the IYAOYAS one
@TheSnyds
4 жыл бұрын
@@MichaelTEpicMikeSkills yesir. Harriers and F35
@MichaelTEpicMikeSkills
4 жыл бұрын
The Snyds nice; I’m jealous haha, I got put on C-130s
Not a fan of these taillight
@pussydestroyer949
5 жыл бұрын
Shut yo bitch ass up
disgusting! having in the 21st century all possible insulating materials to use black duct tape ??? this is absurd, even if you used heat shrinkage, not to mention the normal twist of wires