Well the information about the previous owner was a bit of a surprise! 😅 Use this link and discount code 'Slix' to save money off your OBDEleven coding and diagnostics tool! go.obdeleven.com/Chris_Slix

@KeitumtseThopola

2 ай бұрын

When are we going to see the bmw x3 driving review we have been waiting

@terrytyrrell1381

2 ай бұрын

@@redzone5655 I’m sorry too see that Chris is making you watch his videos

@reevzi06

2 ай бұрын

You need a Suuuuuui.......Sui

@Chris_Slix

2 ай бұрын

@@KeitumtseThopola next vid should be on the x3m 😊

@simondarrie666

2 ай бұрын

@redzone5655 calm down knob head remember was not him that said it so maybe an apology is in order

The past owner was a fantastic surprise and a gentleman, it's nice to get some past info.

Thanks for this Chris. Let me explain; I am recovering from a stroke. ( I lived, sorry if I am telling this story again.) I am quite screwed up, and trying to recover. Watching your tenacity, patience, and stoic nature, gives me strength! It’s something that I draw from. Reminds me to “ keep trying and find a way.” Cheers!

@Chris_Slix

2 ай бұрын

I wont go into detail as to why but i can relate to this! Stay strong 💪🏻

@christopherseivard8925

2 ай бұрын

@@JNCS152 thanks very much! I have used up all my therapy, on my own! Open to suggestions as always!

It's a good job you're not as awkward on camera as you are with strangers on the phone Chris! 😉🤣 That was difficult to watch! 😂

@Chris_Slix

2 ай бұрын

😂😂😂😂😂😂

@Albosovan

2 ай бұрын

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 second i heard the call i started checking the comments

@matthewearle5879

2 ай бұрын

😂😂😂😂😂

@ash_mk1_escort

2 ай бұрын

He was trying to be too polite 🤣 opening line should of been, I want some info about this merc you binned 😀

@matthewsalmon8194

2 ай бұрын

Its also maybe not fair to broadcast it to 200k people on youtube without letting him know first or getting his consent beforehand..esp when you're lying to him about his personal possessions also.

U didn’t get scammed also thst the idea of copart u don’t know what your getting till u see it this is why we love mat

Love that you and Mat are both doing (relatively) expensive cars at the same time

In case anyone else hasn't mentioned this already - copart will cancel your account and block you from purchasing other cars from them with your name, address etc if they find out youve contacted the previous owner of a vehicle you've purchased to try and find out stuff, obtain spare keys etc. which sucks but im guessing its GDPR related. Maybe if you're a KZreadr you can get way with it😉 Keep up the good work Chris, love the vids!

You need to be very careful using a small belt sander when the draw strings if your hoodie are hanging about loose near the revolving belt. If it catches the string within a second or two you could be sanding your face or neck!!! That would not be a pretty sight.

Could be worse, it could have mansoury badges....... 😂

@need4swede_motorsza

2 ай бұрын

😂😂

@ardonjr

2 ай бұрын

Nice! :D

@hkmonaro8153

2 ай бұрын

Why someone would pay so much money to have a car that's soooo tacky 😂😂

@RantsBants

2 ай бұрын

This finished me 😂😂😂😂 Mats mansory badges need some major deep pockets

@ardonjr

2 ай бұрын

@@hkmonaro8153 It's called taste my man.. people have different taste. Nothing wrong with a little something different on the road. Right?

Great video as always! Really nice of the previous owner to speak to you. When do you leave the nurburgring as I'm there on the 22nd with friends.

Quality work as always! Glad Ethan’s sticking around even if it is a merc!

Love your videos Chris, when i see you’ve uploaded a new one i cant wait to get home and watch it 😂. You take on some massive projects so fair play to you. Whats happened to the X3M?

Made my day mate🔥! keep up the good work chris

From Matt to Chris nice, this evening is beautiful.

Would love to see you and Mat Armstrong team up on a build one day! Only found your channel last week and I’ve been binge watching ever since 😂

Loving these videos Chris keep up the hard work 🙌🏻🙌🏻

Enjoying the AMG build, can’t wait to see the progress.

Your videos are decent. I just started watching them. Fills the void while I wait on dmo and mat Armstrong vids but now I sit waiting for yours 😅 keep up the good work

A cordless grinder with a thin disc would do the job in a fraction of time

I absolutely love this kind of content, I'm glad i've come across you on my youtube trending page

Another epic build Chris..looking forward to much more on this one 👍🏻

Another structural repair ✅ glad its you and not me man - unreal vid 🔥

I reckon the black on black dash will work fine

Another great video mate.. keep it up.. can't wait to see this on the road...💯👌🏽

I really like how you like to keep everything clean when you working on.... It really great ❤‍🔥❤‍🔥🔥🔥

Quite a nice watch your welder is sporting!

I would go for the black on black dash, and I’m sure grey on the seats will look fine, maybe even better without it being too grey. Look forward to the next upload 🙌

@petesmith1924

2 ай бұрын

The grey seat inserts could easily be changed to black. My 2015 E Class Merc had imitation rather than real leather, which was painted black by the factory. Not sure if this top end Merc has similar. Just had my F Type seat scratches (real leather) repaired by an upholsterer who matched the colour and used an airbrush, so I don’t see why the grey couldn’t be changed to match the all black dash - would be cheaper than full re trim. Also, as you are going to the Nurburgring have you thought of reaching out to Micha? He might have some contacts to supply the rad pack. Good luck with the build.

Mate Best video enjoyed watching it from Australia 🇦🇺

Good luck with the project

Cheeky Osprey jumper, new intakes for the X3M perhaps 👀

Great video, and what a surprise who the original owner was, love Queen. 👍👍👍👍

Enjoying the vids boys ,New sub 👍

Great video lads 💪🏼💪🏼

Has it had previous damage too? 6.53 - 7.00 when you remove the door seems to show damage at the end of the bar where it attaches to the inner wing? Keep up the great work. Love it!

Awesome content Chris

Depending on how badly damaged the radiators are, you can them repaired by a specalist like Boston Motorcool I believe they may not be far from you.

Great video can’t wait for the next video!

23:32 either make the interior white as much as you can or just take that alcantara with yellow stitching

Buy the black on black dash. All the existing grey can then be re-dyed / painted black to match. I know a full black interior is a little dull, but it’ll save you money to focus on the more important bits

Love the devotion chris bloody madman! But i love it!

we learning a lot great work go for the black Dash

Love your shuff !!!i think the black one .

Well done Chris.

I’d go black on black with the dash, that previous owner sound like a statement from Sir Norman Fry off little Britain had not been drinking, wasn’t speeding some how my car flew over another road and through a wall…

@alexandergreenfield91

2 ай бұрын

Shhhh, better be careful or Tarquin will get his daddy's lawyers to send you a cease and desist. 🙄

Loving this series, and if it was me repairing it, surely getting the black dashboard and re-trimming some parts grey, would be more cost effective than re-trimming the seats ? Keep it as original as poss' IMO, especially as it was spec'd up by Roger Taylor.

Go for the Black on Black dash it’ll look fine. Great video

Go with the black dash... It will look fine!!! Good luck

always nice to find a cool previous owner, even if ya got some serious work on ya hand good luck its def gunna be a road trip beast

@dervinbrown3541

2 ай бұрын

😂

Imagine welding while wearing a pepsi rolex 🤣 loving the videos though

Welding aluminum with electronics in the car could become a nightmare.

Part it out, think DDE could do with the motor for the black one Mike just bought from his pal

WHAAATTTT!!! Roger owned that car at some point? We are huge Queen fans here in Canada. That car will be worth quite the amount with that sort of history. Keep on chugging along

Dawn chris, good luck bud you brave man

Unwavering dedication and humility set you apart. Congrats!

@chiganuggoo9929

2 ай бұрын

BOTS Again......

Great video !

Bought a Cat S car and disappointed with it having structural damage😂😂

@jameshowell6948

2 ай бұрын

Not what he said is it.

hi chris just a thought if you needed the bracket (7.10)could you not cut a peace off of the (7.05) bar ?

Love your channel and the fact it was iwned by Mr Rodger Taylor is something soecial

I believe in you Chris this car will be fixed🎉🎉

Saw one of these in Milan with a black satin wrap and then all the chrome was gold plated and it looked unreal, maybe an idea. Would love one of these cars they look serious, cant wait to see it finished.

Chris give Reclamet in Kent a try. They break a lot of high end vehicles.

I really like the time-lapse

Thanks God, that looks great! I'm sure you will make a miracle with fixing that car!

Quality one that Chris!

Great job looks good

Hi ya Chris The black on blank dash photo had a grey knee pad under driver pod ?

Black dash with yellow stiching and then go for yellow seatbelts when you refurbish them

What you bought is what you have, Cat S write-offs have suffered damage to structural areas of the vehicle such as the chassis or crumple zones. A Category S car can be repaired and put back to a roadworthy condition and used on the road again. However, the car must pass an inspection by an accredited engineer

Great work as always but I'm afraid it's good luck with Copart for breaking terms and conditions with regards contacting the previous owner.

I would be trying to restore this back to how it was ordered now you know who the famous original owner is, I think this will give the car its biggest return for you

If you check out your old dash parts on the bottom might come off and go on the new dash that you buy. As far as the radiator packs BMW should be the same exact match and when you're buying parts don't tell them it's a AMG because they will charge you more and the regular parts are the same parts. Keep up the great work and God Bless. 😊👍🙏🏼

Cracking vid Chris .....great entertainment

How do you manage to track down the previous owner?I've always wanted to contact the previous owner of my car but I wouldn't know where to start

its quite easy to smash the spinning collars off the locking wheel nut without damaging wheel

Get the black on black dash, it'll look fine

Does your obd 11 allow you to recode or fit new ecm or ecu. . Need to fit a new 2nd hand ecm to a 2011 range rover sport. Thanks

Clearly said in the description it has all over damage.

Alot of negative comments. Keep up the good work Chris! More and more views on each video so don't change. Nice to show the good, the bad and the ugly in my opinion

If you can not find the exact part than I would suggest to get the same airbags repaired some people are repairing the dashboards and seatbelts

Yellow trim on the dash would be nice

I reckon a PDR tech could sort that qauter 👌 I've only been doing it couple's years and I reckon I'd get it 70% there, so proper experience tech would smash it 😀

Can you just get the black dash and split it to use the grey you already have??

where the x3m you left it still down the road lol

Go with the black on black dash.

Go for the black dashboard

When removing a Mercedes wheel, always leave one bolt in (Just loosened) before you knock it loose. Saves your appendages.

@Chris_Slix

2 ай бұрын

Will definitely be doing this next time 😂😂😂

Sounds like you need too drum up some money 😂loving the vid love the car too great project too get stuck into

So now you can treat us to Queen's I'm in love with my car, as part of the soundtrack for the repair

Funny that goonsquad is also working on an amg gt. Same fender issue !

air bags can be repaired if not torn

Isn’t the engine/rads the same as the C63?? Surely some of the mechanical bits are interchangeable

What's that tune at 8:56? Sounds mint, very FIFA

AMG gt black series body kit ??

“But we’re not gonna give up” Like pressed!😂 good luck Chris!🤙✌️ P.S.: THAT CAR BELONGED TO WHOO??!😳😳😳

Rubber Mallet. The midlanders love tool of choice.

if you do a quick google there's a Breakers near Wigan called Douglas valley, they do a lot of high end cars, they may have parts for you.

@Chris_Slix

2 ай бұрын

Ill have a nosey! Thanks 😊

I don't know if you would like to update the GTS to black series

Does obdeleven works on nissan vehicles???

Can’t believe I just as u Langley mill in ur car no way 😂

3:14 sounds like a Nigerian prince from Fonejacker