The goes a lot further than you think, almost to the end of the handle. Yeah you levered the blade on the finger guard and snapped the tang. kzread.info/dash/bejne/e56I0sWaf5vYm5c.html here you see how long the tang is.

@CedricAda

5 жыл бұрын

leif forrest did a followup and confirmed this gentleman is correct!

@brianwayne08

4 жыл бұрын

Actually that's the same dude lol

@explorerextraordinaire5472

4 жыл бұрын

el oh el

@Handles-R-Lame

3 жыл бұрын

@@brianwayne08 lmaooo

@Handles-R-Lame

3 жыл бұрын

@Israel Mateo yeah ur right i def dont give a shit, it does sound intriguing however 🤔 But not enough to keep me interested tho

One thing to note.. I know this is an older vid, but when the blade originally came loose, you were hitting the spine while the guard was resting on the log(and making divots in that log from the force). You may not have experienced the same failure at that point had you moved the knife further back so that the handle didn't come in contact with the log you were using as support.

@garethbaus5471

4 жыл бұрын

That was pretty extreme, it was pretty funny how it was sortove being driven into the log.

@Jason-bd5iq

4 жыл бұрын

They’re a cheap and sharp knife, I’ve seen them break in lots of videos with less. Honestly I’m not sure some more expensive knives would hold up to batoning.

@BrentonCarr

4 жыл бұрын

That's what I noticed too. Guessing that's when he truly broke the Tang.

@Handles-R-Lame

3 жыл бұрын

@@Jason-bd5iq it really is, unless you go with full tang knives(even then they do break on occasion) the possibility of it breaking is almost always there, lets be realistic.

@chriskp

3 ай бұрын

@@Jason-bd5iqcould you suggest a video where they break from less?

Just a little detail which you didn't get quite right: When you compare the Mora Companion to the Pro 511 you state the Companion's blade is thicker than the one of the 511. This is only true for the stainless steel Companion which has a 2.5mm thick blade. The Companion carbon steel has a 2.0mm thick blade like the Pro 511. Mora uses a thicker blade on the stainless steel Companion to compensate for the reduced toughness of their 12C27 stainless steel compared to the C100 used for the carbon model.

@CedricAda

5 жыл бұрын

true!

@billbill1413

4 жыл бұрын

Say more things please

Nerozumiem a asi ani nikdy nepochopím, čo týmto vy experti sledujete. Len veľmi jednoduchý chlapec z mesta používa 511 na batoning. Ja chlapec z dediny vždy použijem fulltang nôž, alebo ešte radšej kukri alebo úplne najjj sekeru🎉😂

I don't think the issue was the batoning itself, but the guard sitting on the stump when cutting through branches. That probably caused the stress fractures, that made it break in the end. Saw a guy break a Bushcraft Black the same way. As You said this is knife is more of a work knife than a bushcraft knife. Still, it's a credit to Mora, that this failure wasn't as dangerous as it could have been.

@dougjohnsonbushcraftandbjj5561

6 жыл бұрын

Mátyás Türk bushcraft black takes WAY more to break though. It will survive Damn near anything

@astang1072

6 жыл бұрын

Türk, correct. But also that last piece he was going through had wonky grain and a huge knot. That would have been tough with a hatchet. That’s the problem with batoning and why so many people think you shouldn’t do it with any knife: splitting little bits of wood or cutting through green wood with little taps is perfectly acceptable to do with any fixed blade. People just need to remember ITS NOT AN 8LB SPLITTING MAUL!! Paraphrasing words of the great Ethan Becker: “If you’re beating your knife trying to split a log, burn it! Get something else to split kindling from.”

@DL-oi9gl

6 жыл бұрын

You hit the nail on the head. At 4:04 when he broke the blade the guard was sitting and therefore pressed against the stump. So it's NOT just the force required to chop through the small branch that broke it, but the excessive force pounding on the spine of the blade against the guard on the stump!

Hi Cedric, thank you for your fair and objective reviews. I really enjoy them.

tbh, if you hadnt hit the handle or leveraged the guard against the wood while cross batoning, its unlikely it would have broken. thats a lot of leverage your applying to the weakest point of the knife using two different techniques. when cross batoning, make sure the guard has clearance to not hit the surface your batoning on. when split batoning, hold the handle in your hand, hit only the blade tip like your doing in the begenning, and dont wrench on the handle and especially dont hit the handle to get it unstuck. you could do that all day without a problem. I would honestly call this more user error than the knife failing, i used to baton the old 1/3 tang clippers for years and only ever had one break, you just have to use the right techniques.

@Horde334

2 жыл бұрын

True but he did release a video confirming that his assessment of the tang was wrong and even admitted that the test was unrealistic and pushed the boundary of what you should test but imo this shows how tough a budget knife like the 511 is still durable and within the realm of proper usage its unlikely the blade tang will ever break. As testing goes sometimes its good to push stress testing to extremes to see limits all i know is for the money this is a hard fixed blade to beat.

My very first Mora was a 511, which I purchased, in no small part, because I couldn't believe A) that people were making all this fuss was about these cheap, ugly knives, and B) that anything that cheap ($8) could be worth anything. I still have that 511. I've put it through a LOT of wood, not just carving, but also batoning (smaller, and presumably softer wood than that red gum, which looks half-a-step from petrified). I've also seen others do BRUTAL things that I would never have considered to 511's with no ill effects, so I suspect you got the runt of the litter.

@garethbaus5471

4 жыл бұрын

The guard was being pounded into the log, something that would damage a more heavily built knife eventually.

Hey brotha. Used a magnet. And contacted mora. Bother show that the tang goes way further back into the grip. About 2/3 into the handle. I believe yours snapped somewhere in there. You should cut the grip to find out.

@CedricAda

7 жыл бұрын

+Erick Ohmstede ill do that tonight and post results

@antchung2370

7 жыл бұрын

Agree..

@CedricAda

7 жыл бұрын

+Erick Ohmstede Video uploading now - you are correct sir!

@erickmo1188

7 жыл бұрын

Cedric & Ada Gear and Outdoors looking forward to the vid.

Just found this channel. I got my first morakniv, companion HD. Sharpest knife I've ever owned.

My companion goes with me more than any fixed blade. I love it but won't lose sleep if I lose it or do something silly and wreck it. New camera looks great.

@jimyocum9556

7 жыл бұрын

Jack FarmBoy all yes you will!!that's what I thought too,, until I lost one I had for years.. guess who spent days tracing and backtracking steps for 3 days to find a 12.00 🔪?.., sure the cost isn't there to think about it but if you're a knife guy it will work its way into your heart and a replacement just isn't the same...just a friendly fair warning..haha

@Ve-suvius

11 ай бұрын

You get a bond with the knife that served you so well for a long time. Price doesn't interfer with this.

Love the bushcraft black, tough and durable but easy to use for fine work. Great knife

What kind of wood were you carving? I've never seen anything like it

I love the 511, had mine for ages, great handle, only change I made was a cheap eBay sheaf

I have couple of mora knifes but only this model holding edge incredible long.Its just amazing knife.My favorite from Mora....

already got the carbon steel one. just ordered 2 stainless steel ones for outdoors food prep! Mora is the bomb

I just bought a new one last week with an orange handle.

@CedricAda

7 жыл бұрын

+PREPAREDMIND101 im gonna carpet bomb my whole family and friends with them this christmas

@animalmother556x45

6 жыл бұрын

Cedric & Ada Gear and Outdoors .....I am doing the same thing. Amazon has Mora Companions for 8.50 US dollars right now.....I got 10. Carpet bombing will commence in a few days. Merry Christmas, sir.

It just occurred to me that since we all seem to agree that the rat tail blade snapped inside the handle when the finger guard kept hitting the stump while you were cutting the branch - it’s actually amazing that it was still locked into the handle enough to allow you to keep slicing and batoning more wood. Sure would like to see a re-test without the oddball finger guard induced snap.

Awesome vid. You got to know the limits of this amazing compact Mora. Of course it is not a batonning tool, you can baton with it, but it should be only small woods, and you have to do it a more proper way (blade always the most perpendicular as possible to the log).

I batoned my 511 once through some fairly big fire wood (because I didn't have anything else with me) and I worked out ok! That being said I agree it's not a good idea.

I still love my Garberg the knife just grows on ya. Did you see that Real Steel has a new survival knife called the Bushcraft Plus? It is one awesome looking knife, it comes in a high scandi and also a flat grind, I will let you know what I think here soon.

Thanks Pete I had always assumed it was the exact same blade as the companion just with a cheaper handle I had no idea it was thinner.

@shawnpepin7890

3 жыл бұрын

thats a companion HD... and the 511 tang goes way further than that,, hew just broke the tang

the knife failed because you wailed on the blade, thinking your trying to get through the wood, but the handle was on the wood, so you were just pounding the handle into the wood by banging on the blade.

Excellent review

What are some of your favorite full-tang knives nowadays if I do want something a lil more robust without a huge blade?

It's a 4$ knife. If you ask me it's really an amazing and robust knife for the price you pay. Comes razor sharp out of the factory and you get an ok sheath. Here in Sweden you can get them for as low as 3$. Can't beat that price it's literally the price of two Swedish beers

@FS-gl9cg

3 жыл бұрын

6€ germany

@johnnyboy1586

2 жыл бұрын

$30 in New Zealand

These are great knives, but don’t expect a “sharpened pry bar “ as some are inclined to do. ALWAYS carry more than one knife in the woods.

I would use it to punch through a piece of sheet metal or demolish part of a chimney. Basicly use and abuse, when broken replace.

was watching an older video on Mora's an it was particularly noted and shown with a magnet the tang on the 511 came 3/4 of the way to the back of the handle, not this was the older style 511 not the one with the pro handle, Did Mora start skimping with the steel when the y gave us the new great pro-shaped handle? I like the old design better in thew hand anyway. The video was two years before this one by preparmind101.

Just about to buy one now 4 years after your video:)

Great stuff Peter, I was looking at getting one of these or do you think it makes more sense to just get the Companion HD, price isn't that big of a jump. Just gonna have it as a knife when I'm going any where like the beach or hiking just to have a good blade on me.

@CedricAda

7 жыл бұрын

+ThisIsAPrettyLongUserNameWhyTheFuckWouldHeDoThatSoThatEveryoneWouldThumbsUpIt yeah for your purpose id skip this and go straight to companion. This feels more of a stationary craft knife, a bit less versatile.

Love this knife I just needed it to match my takle box so when I'm fishing it looks nice and can be used to cut string and on acasion make a carve a stick in free time

@nicholasdewes7296

5 жыл бұрын

Sorry I speak good English just having a bad day all American

I threw one on a bladhq order, just as a general purpose shop knife. I'm not expecting hard use, cutting twine, cord, rope, opening boxes, the odd carving job. Maybe one day it will be upgraded, maybe not. A basic (sharp) knife is all I need.

I always keep one or two Mora basics around to lend out to people who ask for a knife. The edge geometry, steel quality and overall sturdyness is great and I have some that have seen much much worse abuse than shown in this video and are still going strong after years. Also I got them all for 5€ each. Everybody who sometimes lends out knives should have some.

That didn't look like a small tang, that looks like a snapped tang. Forgot about the other video, looks like you corrected that statement.

You can get these for 5€ in German Home Depot stores…. A friend of mine has 12 of them in every room and vehicle a few… :D

The knots weren't enough of a warning not to baton?

I like your content ! Sorry I can’t afford to be a patron. Thanks for sharing your knowledge and experience.

Say Heah Cedric, I personally like the Mora 510, Infact it's one of my Fav. Neck Knives. If you L@@k closely at the blade profile you will see it identical to the classic #1. That being said, I like the handle better in that case. I also like the fact the new ones are thinner so they slice better. That's exactly what I want as a neck knife. A cutter.,,. p

I can't look at a Mora without thinking about the scout knife (Mora classic with guard) from Battlefield 4

Was it by hitting limpets off rocks? btw I have the old one I turned into a 510. {Edit} and better tangs in the older ones (511s) by the look of it

@CSGraves

7 жыл бұрын

Heh. survival limpets.

@Among-the-trees

7 жыл бұрын

Being a young man, having lived on the Scottish coast for most of my younger years. They would have to be! I'd be eating a 1001 things before survival limpets lol. Better bait or covered in garlic butter.

The Mora knife is typical variant of the Scandinavian type of knives. Built for everyday work and tasks in the woods. I have been using these types of knives for most of my life, and it feels a bit funny when I see these reviews on KZread. In Sweden Moras are a natural part of life, and when people in other parts of the world see the practicality of 'our' knives it's just odd. It's like watching people finding a new faith for the first time. I guess the Nepalese feel the same thing about their Khukuris and the popularity they have gained in the world...

you were hiting the blade when the handle was on the wood

@CedricAda

6 жыл бұрын

yeah epic fail on mu behalf - check the follow up vid to this, too

@zweitaktpower5218

6 жыл бұрын

Cedric & Ada Gear and Outdoors I will thanks for reply

My morakniv blunted the tip after staving into wood one time.... Fail.

Are all morakniv tangs that small or is it just the basic line? Besides the garburg I mean.

@CedricAda

7 жыл бұрын

Mt. Baldwin on the companion it goes halfway and on the bushcraft series it goes 3/4s. The really low cost moras like this one have the small tangs :)

I've got the stainless version of this with the blue handle. I use it as a guinea pig knife for when I want to test out new stones/sharpeners. Didn't realize the tang on this guy was so short

@CedricAda

7 жыл бұрын

+subroc yeah i was quite suprised when i pulled it out and it was this small! Not needing it any bigger i guess but i estimated half way at least!

@subroc4

7 жыл бұрын

I dunno, I'm quite alarmed at how short it is. It's no wonder yours shook loose from the handle. It's definitely a good thing to know. At only a few bucks difference, there's really no reason not to go for the Companion over this every time. Oh, and I don't know if you're still using your wife's DSLR or you've got your new camera, but the picture quality is way improved. Particularly the stuff at 3:43 struck me as really pretty

@CedricAda

7 жыл бұрын

+subroc yeah I think i might stick on this while I save up for a 4k handycam. All the youtubers I admire primarily use DSLRs it turns out (i just assumed everyone still bought handycams but apparently they aren't mainstream anymore at all!? - I really gotta learn this suff!)

@eachday9538

7 жыл бұрын

Cedric & Ada Gear and Outdoors Just about every time I see some video and think "ooh that's real nice" and see what camera they are using it turns out to be a Canon dslr. And I don't think it is just that people who know their shit buy them, because I've seen people who I'm pretty sure don't know what they are doing make poorly shot but otherwise beautifully rich crispy/buttery video. My wife's camera is a Sony NEX-5R which does alright, it's strength is its fairly compact size as it is a mirrorless dslr, it has a lcd viewfinder only so doesn't need so much internal glass and bits. The video function on the Sony is not as convenient as a JVC camcorder, but I hear that the Canon interface is more geared toward video. A big part of the whole deal is having the different lenses and knowing how to use them. I've only watched some tutorials, I haven't been able to justify getting the lenses, but a macro lens would serve you very well and it is useful for more than just close ups. The Sony NEX use a proprietary lens type that is smaller than the standard ones. I gather there is better variety, and better value in the standard lenses they'd use on a big Canon.

@CedricAda

7 жыл бұрын

I am just way too scared to take a DSLR outside of my backyard, let alone the crazy lenses that you can get! I think it'll be this DLSR for stump top and indoors stuff but a nice fairly flash camcorder for my outdoor stuff.

They may well be a good budget knife but if you use knives a lot they aren't as cost effective as one might think. Better to invest a little more. For me the bargain of the year is the Terava 110. A bigger knife, and does things differently but for Bushcrafty work its more than x10 better and will last more than x10 too. So in my mind a better investment. Sometimes specialised tools are required and here Mora does do some great items. I have a good few Moras but they are not my choice if I want to do a general Bushcraft knife. Been there and broke them too frequently when pushing them beyond what they should do, but then I needed to do more and thats all I had. So great knives but know their limitations because they do have plenty of limitations. Good review though.

You did get the Pro C or the Pro Robust in C though, right? You have seen Joe X not being able to break is during those 6 years I guess haha. (If not, get that treat! 😅🤭🥰) I personally like the Pro C by the way, but the basic is still great!

Moras are so fun

I never do batoning with my knive. Why should i ?

@hawk.86

5 жыл бұрын

Bruder K it’s the manliest way to open packages

@Horde334

2 жыл бұрын

Look up a tool called a froe you'd be shocked to find out people used to baton with knives designed for splitting wood into boards cause an axe can't make a controlled cut the same way a froe can consistently.

I think its hit and miss ive had mine 10 yrs and although i have never used it to baton i have put it through hell and to cant tell what it it any more but still going

I just got it for my 12 year old boy and 15 year girl for a camp knife. They love carving walking sticks

You could always make it into a opinel style folding knite quite easy after you hroke it, steel is heat treated quite well afterall🤷🙏

Bloody hell babe if you treated friend and family the way you batoned that knife, you'd be doing 20 to life.

Picked up 2 of these off Amazon 8 dollar's each.

They are great knives. It was your fault that it broke. ‘A bad workman,blames his tools’…

Have to try pretty hard to break these

Bottomed out the handle and kept hitting, result, a broken knife. Lol.

"Great for stealing your enemies dog tags."

Cool

Still only 18 buxks on Ebay today in Aus 👌👌

great

Nice camera, Very high quality video my friend. Do you guys have jb weld in Australia? It can weld metal together, or maybe epoxy if you wanted to fix the 511 lol. It's probably better to buy a new one. Thanks again for the review Pete

@CedricAda

7 жыл бұрын

+49Giants hehe yup, just sawed this one i. half to discover its secrets

@49giants3

7 жыл бұрын

Cedric & Ada Gear and Outdoors can't wait for the update video!!

The 511 is the knife everyone have in their pocket at work here in sweden. Its a cheap beater. When it gets dull or break we just throw it away and get a new one. Handy little tool for sure.

i kinda want to punch through sheet metal with it though

Could you do the same test with the Kansbol?

@CedricAda

7 жыл бұрын

+Tomas Sandberg I do have a kansbol on the list so yes that will happen!

You smacked the handle! No wonder it broke. Probably you'd have been fine if you'd have just pounded on the blade. But as you say, it's a $10 knife.

@CedricAda

7 жыл бұрын

+Rob Babcock yep, no issues with obvious mistreatment breaking a knife of this cost and purpose

Would buy one tomorrow, if I only wasn't a pensioner !

You shouldn't ever need to baton wood in Australia anyway

Looks like a good knife, I just ordered 2. I’m not the kinda guy that uses a knife to split wood so this should work just fine 👍

You broke bout an inch off the tang seen someone break it at the same point then he cut the handle open to show exactly where it broke

I wouldnt be battoning a knife like this, and generally will always carry the x7hatchet.

That's not a realistic test. The protruding guard was resting right on the stump. This is a craft knife, not a bushcraft or hard use knife.

I use an axe for processing wood.

@CedricAda

5 жыл бұрын

great choice

@billystink4611

4 жыл бұрын

Right tool for the job.

@Horde334

2 жыл бұрын

Im more amazed that people don't know of a tool called a froe seems like people think only axes can chop and split wood....

All I would say, is show what it CAN do, not what it obviously can’t. No one is gonna baton that small knife.

Cedric I love your videos you have taught me so much, but this is not a fair review of the knife since you are not batoning like you would normally with a knife. You should make a new review and remove this video.

@FS-gl9cg

3 жыл бұрын

sure he d oes

You don't know how to use a knife. Why did you keep batoning when it could not go any further? Didn't you feel the guard hitting the tree stump? Why didn't you move the stick to the edge of the stump so the guard would not get in the way?

I don't think Mora uses 1095 steel (or 1085) for their carbon steel blades. I had read that Mora used UHB-20C for their carbon blades. However, according to this Morakniv website, the Companion MG Carbon steel blades are made out of C100 steel. Both UHB-20C and C100 supposedly have similar properties as 1095. moraknives.eu/Companion_MG_carbon_steel

6:21 hitting the handle on a plastic handled knife. than complain it broke.

@CedricAda

5 жыл бұрын

Francois Dupont not complain, just show. please listen to the first 30 seconds of the video again.

You don’t use a knife to cut logs you use an axe

@CedricAda

5 жыл бұрын

you dont say

Есть поговорка, про дурака и стеклянный член...

Try another video, dont bottom out the handle.....thanks for the review though.

@brando5705

2 жыл бұрын

Just watched outdoor55 break one. He didn't bottom out the handle...still broke lol. Not your bad. Probably would have broke eventually battoning.

why would you say this is a great knife, when it broke. Sorry, but that is the definition of terrible.

It broke cus its a low priced knife...

@jacktheripper1270

3 жыл бұрын

wrong the tang is way longer read other comments he just abused it too bad he was putting extra force on the plastic by hitting it while the fingerguard was ON the log

In the end of the day...mora sucks

@bruderk4257

5 жыл бұрын

And why is that ?