It’s cool to see alot of the options for bolt ons so early on.

@BadlandIndustries

6 ай бұрын

100%

Great video, thank you for the recommendations!!. Besides the Dome Lights, where else in the truck you used the LED bulbs you linked in the video description?

@BadlandIndustries

2 ай бұрын

The reverse lights were lacking. Certain trims had incandescent bulbs, and you can replace those with led.

Have had my Colorado for barely 24 hours now and thought this was an interesting list. Thanks for sharing.

@BadlandIndustries

Ай бұрын

What do you plan to do first on yours?

@Hazdazos

Ай бұрын

@@BadlandIndustries mine didn't come with floor mats, so probably that. I also want to motorize the rear window - if I have time this week, I want to start modeling it up in CAD and see what I come up with.

@BadlandIndustries

Ай бұрын

@Hazdazos that would be cool. You'd have to figure out the latch though. Unless the actuator is the mechanism locking it closed

@Hazdazos

Ай бұрын

@BadlandIndustries yeah if you use an acme thread or similar, you can't (easily) back-drive it, so that would act as the lock. Plus the window is so small, there is little concern about someone gaining entry to the cabin if they did somehow break the actuator.

My 1st mod was flowmaster 40 & resonator delete. The sound this motor makes at low rpm under load through the modified exhaust is very rewarding.

@BadlandIndustries

3 ай бұрын

Have you made a video with how it sounds?

@Torch4Life

3 ай бұрын

@@BadlandIndustries I've made a couple but the engine's idling, not under load, & it's Totally different/better loaded. I'll try to make one specif highlighting that. The exh is 3 inches a-z already, so folks should make sure the muffler is too so as to not slow flow down, & the resonator Absolutely has to go, it won't sound any good if you leave it & it's not like it's super loud or offensive w/o it. You'll put me on your xmas card list.

Blow off Valve Yes install and review

@grey1wa

6 ай бұрын

My first mod was blacking out the side markers with some tinted vinyl wrap I had left from another project. at the same time I also added PPF to my door sills, and then added a 10" Powered hideaway sub. and Finally AVS Window visors. meanwhile Patiently waiting on some more after market parts :D

@BadlandIndustries

6 ай бұрын

Right on man!

@mikemccabe7124

3 ай бұрын

I agree I got my canyon a month ago and want to know how easy and how effective it is so any input would be greatly appreciated and love the Matt's offroad recovery shirt I'm a fan of fab rats, Matt's, trail mater and robby laytons channel

@grey1wa

3 ай бұрын

@@mikemccabe7124 sweet.. what color?

@mikemccabe7124

3 ай бұрын

@grey1wa it's white body with black rims, grille, fender flares & trim peices

Hi. Great Video. Do you recall what percent window tint you went with? It looks just about perfect 👍🏼

@BadlandIndustries

28 күн бұрын

If memory serves 75% windshield 30% on the fronts and 18% on the backs. Really works well and isn't too dark looking out

Love what you did to the truck! And the tints make such a big difference what % did u go with all around?

@BadlandIndustries

3 ай бұрын

I dont remember off hand. Lightest I could on the front, darker on the front 2 and lighter on the back half. It all looks super even. Honestly seemed to feel like the cab stayed warmer due to it. We'll see how summer does

I'm doin alot of factory integration stereo stuff with my canyon using a dsp and aftermarket speakers and subs, im curious to learn more on any leveling/lift kits.. im doin some small exterior mods like a floating roof look using vinyl wrap from vivid with ther high gloss pianno black like andre did from TFL on his colorado i think it adds a subtle enhancement to the black and white theme im going for he did a vid on his and i liked it more after i did mine

@BadlandIndustries

3 ай бұрын

I'll be installing the lift I've been working on here in the next few weeks. You guys will want to see how it turns out.

Do you have an install video for the rearview camera mirror?! Thanks for this video btw!!

@BadlandIndustries

4 ай бұрын

It's coming soon

@Geonade

Ай бұрын

agreed

@luisnivar2854

Ай бұрын

Please iam wait for that video 🎉​@BadlandIndustries

Your video and truck are awesome! can you give more details about the 'Dash Track' Mount. I cant find any solutions for my 23 Jeep Grand Cherokee

@BadlandIndustries

6 ай бұрын

I dont have one to test on but I'd be happy to look at it.

Great content. Have you created an install video for the wolfbox? TIA

@BadlandIndustries

Ай бұрын

Editing it currently. I made the mistake of going cheap with the hard wire kit and chased the issue for months. Got it sorted and video will be out soon.

@johnconnolly9086

Ай бұрын

Awesome! Thanks for the update. Appreciate all you do for us DIYers! Very helpful

awsome video. keep it up!

@BadlandIndustries

6 ай бұрын

Thanks man

Interested in the leveling kits. We have four of these trucks on order and we always add leveling kits.

@BadlandIndustries

2 ай бұрын

We thoroughly tested the kit we're working on at Sand hollow last week. Pretty happy with the results so far.

Great idea for seat belt covers, what size did you get? small or large? Thanks

@BadlandIndustries

26 күн бұрын

You need 2 of each. Take a look at your trucks buckles to see the difference between the two sizes.

That LED in the step bumper is something I haven’t seen 💡

@BadlandIndustries

2 ай бұрын

i use it all the time. i cant wait to hook it up to my auxbeam switch panel

I have a 2018 Colorado and run 35% tint on my front doors and back window and limo zero on the back windows and it was a night and day difference not just in brightness but in heat.

@BadlandIndustries

6 ай бұрын

Ceramic is no joke. I was skeptical until I had it installed

Nice video. Thank for sharing. Couple questions and a comment… -Where did you find the dash track? Been looking all over for one of those and can’t seem to find it. -What was the 3rd brake light? Asking, because I installed one and want to know if I should be watching out for a leak. -Lastly, I’d say no to the BoV. Personally, I think it would get annoying. Thanks! Jeff

@BadlandIndustries

4 ай бұрын

I made the dash track and vent mount. 3rd brake light doesnt leak into the cab but I had moisture inside of it recently. If you say no to the BOV spacer you'll hate my video being uploaded right now lol

Did you make a video of the rear view mirror /camera? It is really nice

@BadlandIndustries

24 күн бұрын

Just uploaded it yesterday

Where did you get seat belt cover and door seal liner. Thanks for sharing

@BadlandIndustries

2 ай бұрын

i have links to everything in the video description

For your dash cam / rear view mirror. Where did you mount your rear facing camera? Did you utilize any of the HD vision cameras or did you mount the provided one somewhere?

@BadlandIndustries

2 күн бұрын

I actually just released the install video a couple weeks ago. It's on the channel

got a 2023 canon at4 got ceramic tints first, 5% sides and back. 45% front.

@BadlandIndustries

4 ай бұрын

That's dark man.

What are you thinking about on suspension lift? Are you making something yourself interested in finding out before purchasing another product. Thanks

@BadlandIndustries

4 ай бұрын

yes i'm working on a kit that works differently than the other current offerings. stay tuned

What light kit did you use for the bed lights? Was it plug n play? Link? Nice video!

@BadlandIndustries

5 ай бұрын

they were from a silverado. it wasnt plug and play but some simple wiring is all it took to make them work. take a look at this kit amzn.to/48q26zK

Do you have a link to the window tint?

@BadlandIndustries

Ай бұрын

No, just find a local shop and have them do it.

OT.....I'd like to replace my LED headlights to stronger ones. I have a 2023 GMC Canyon Denali, the AUTO place I do business with stated that the LED lights are sealed and can not be replaced. Is this correct? Thank You.

@BadlandIndustries

3 ай бұрын

I've seen quite a few guys convert to led. They are 9005 bulbs.

Are you going to have a sprayed in bed liner? If so, which one?

@BadlandIndustries

6 ай бұрын

I want to test raptor with a diy aggregate. I plan to raptor my colorado and I figured this was a good project to try out the product.

Have you thought about wheel spacers?

@BadlandIndustries

5 ай бұрын

I have them. Many people are skeptical about them. I'm still testing the spacers I have on my truck. I didn't want to recommend something that wasn't safe.

Hey, what’s the issue on the 3rd brake light? I think I bought the same one

@BadlandIndustries

3 ай бұрын

Had some water intrusion into the housing.

where did u buy the vent mount for the auxbeam light controller ?

@BadlandIndustries

3 ай бұрын

I make it. It's on the website.

all weather GMC floor mats. They were damn near free with the GMC reward points

With the seat buckle covers, why two small and one large?

@BadlandIndustries

Ай бұрын

They are different sizes from gm.

@RayD1234

12 күн бұрын

I ordered these and you actually need 2 large for the front seats and 3 small for the back seats. You could get away with only 2 small for the back, because the middle seat isn’t hitting plastic, but I went with 3 so they all look alike.

@BadlandIndustries

12 күн бұрын

@@RayD1234 good call. I was only concerned with destroying the plastics.

Can you make a video of that rear view mirror camera ?

@BadlandIndustries

5 ай бұрын

Yes I have its just not released just yet.

@juanfuentes-chavez8324

5 ай бұрын

@@BadlandIndustries ill be waiting man 👍🏻

@Geonade

Ай бұрын

@@BadlandIndustries any eta?

@BadlandIndustries

Ай бұрын

@Geonade likely this weekend. I'm catching up on orders currently.

So this tow reciever kit will fit my colorado 2023 wt?

@BadlandIndustries

3 ай бұрын

it should. there's some talk about the step brackets but if your truck doesn't have that then just cut them off or find a hitch that doesn't use them.

what percentage of tint did you go with?

@BadlandIndustries

Ай бұрын

I forget exactly but I believe 70 on the windshield and all the rear windows and 50 on the front 2. Ended up matching really well and the front isn't too dark.

@draconus003

Ай бұрын

@@BadlandIndustries Awesome thanks for the quick reply. I'm definitely going to do some research into the cost in my area to get it done once I get my 2024 truck.

@BadlandIndustries

Ай бұрын

@draconus003 for the money it's been one of the best mods so far. Winter didnt seem to need the heater much now heading into warmer weather I'm excited to see how it does.

@draconus003

Ай бұрын

@@BadlandIndustries That's really awesome to hear... thanks

what tint percentage is it brother ?

@BadlandIndustries

Күн бұрын

I went real light on the windshield, something like 75%. The fronts I did I think 18% and 35% on the back factory tinted glass. Really light looking out and matches all the way around.

@mikewilkins136

Күн бұрын

@BadlandIndustries thanks for the info brother