What is the difference between the iDataLink Maestro RR and RR2 Car Stereo Lab Car Stereo Lab
Автокөліктер мен көлік құралдары
Get your shirt here www.teespring.com/stores/fivestarcarstereo
Visit Dean and Fernando's Tool drawer for a all your install tool needs
www.dandftooldrawer.com
If you like what we do, support the show at Patreon-
/ fivestarcarstereo
Our Social links if you want to keep up with us
Facebook- / fivestarcarstereo
instagram- / 5starcarstereo
Dean- / deanbeyett
Fernando- / mr_lopez13
twitter - / 5star_carstereo
Пікірлер: 173
You are the Master and Commander of electronic car installation. I am truly amazed at your expertise and look forward for you to install my aftermarket radio. Outstanding. Thank you for all your help and knowledge in helping all of us.
It is nice to see that we are now at a place where car stereo technology and the industry has truly taken a step forward. It's very exciting stuff and I look forward to iDatalink maturing as a platform
" kids screaming, that would be bad" was the best line . compelled me to like and subscribe. enjoyed your video.
Holy hell. I learned alot from this video. THANK YOU.
Just picked up the RR2 and I can say I feel a hell of a lot more comfortable understanding its functions and programming it. great Job!
@Jesse123xd
3 жыл бұрын
They haven't released the firmware/software update via bluetooth yet, have they?
I give tons of credit to iDatalink for a great product but also allowing DIYers to program their modules. This is very unlike the unstable junk that DEI puts out like the DBall2, and how they are greedy and stopped allowing consumers to program them even after we bought all the programming cables. Very scummy.
Dude, I wouldn't know anything about anything if it weren't for this channel and a few others. Thank you so much, dude!
Cannot wait to get a hold of one of these. I can finally replace that horrible MFT 8" factory unit for an Alpine. Time to gut the Sony and MFT and start fresh. Appreciate these videos
Great videos, thank you. Helped me figure out my new setup. I got a Rr and an Alpine ILX-W650 for my Jeep and the Rr didn't ask for the serial number of the radio during the setup. Either it auto-detected it or didn't need it.
Looks like I'm about ready for an upgrade...to this thing. I miss my Jetta steering wheel controls, and I need more sticky stuff all over my trunk ;-)
Awesome video as always Dean!
Very Educational !!!!! Thank you Sir 👍🏻
have a 2013 camaro i'm installing the RR2 into because of those programmable outputs, i have a line lock and 2 step systems that are also going in at the same time and rather than muck up the dashboard with a "master" switch for each (wanting them independent) I'm using those programmable outputs to control a pair of relays, clean look!
Sooooo niceee !! I decide to do it myself I thought it was super complex than that using some VCM tool o wherever thank you. I have aquestion I see forscan software in your laptop can you do some tutorials like flashing the cluster. Thanks again.
this is dope. I currently have the rr in my mustang. Can you provide a video of the radar operation interface. I have the max 360c would love to see how this works before upgrading
Keep rockin' the info boys! Educate the masses on the best new tech available! BTW, whats happening with that Zapco DSP you guys got.....give away?? Hint hint. Just sayin..... I would drive from Victoria BC Canada for you guys to redo my 2016 F-150 featuring that beauty.....But dear god the fuel to get there! Cost me a fortune!
So I’m thinking about using this so I can control some 4x4 lights on my truck, it seem like this would be a really slick way to do that. And control the climate.
Wow... I hope Maestro is kicking you are few $$$ just talked me into getting the RR2.
Man you are one smart cookie!
Thanks for all the info. I don't think I would need or use the MPO function. I'm still able to program my steering wheel bottons (press and long press) with the RR, correct? If so I'll save the 50 bucks and stick with the RR instead of the RR2.
Do you have a video explaining each socket function on th RR? After my install on a Toyota Sienna, there are two or three unused sockets. I would like to know each sockets function by color.
Great stuff! I truly love your tutorials. I'm interested in the iDataLinks products for my car. I own a 2018 Ford mustang GT with the 9 speaker (no sub) stereo system. I want to replace the factory stereo with a Kenwood radio. What iDataLink products do you recommend? I want to retain as much functionality as possible.
Very nice video my friend, very informative and cool things to play with in the future, thank you!
I've got a GMRS that I'm going to install with my RR2. One of the things I was thinking about developing (but might not need to now) is a device that allows the audio from the GMRS to be overlayed onto the entertainment audio. Ideally, it would slightly fade the entertainment audio in preference of the GMRS (communications) audio. Do you think that's doable with the RR2?
What if instead of muting the audio when in reverse I want the volume to be turned down just enough but not completely? Would this be possible with the RR2? Is it also possible to make the turn signal activate a side camera input and show it in the screen (like Honda change lane assist)? Thank you!
I have a question will these be able to integrate again my lane change camera when my right turn signal is activate on my 2014 civic ex I have a w8500nex radio.
Good stuff!
The new switchable outputs, can it be programmed that the head unit can perform an output? (Ie Kenwood HU has a soft key that could send a signal to the new harness?)
great information onthat rr2
I installed this into my 2016 Cruze, but the climate controls don’t work by touch. They only change on the head unit when I adjust the stock climate controls. Is that normal?
Cool, thinking outloud, this can enable us to make our car sort of smart!
This video is very helpful. iDatalink is telling me that my car does not have a harness because it has navigation. They say they will eventually release a HK2 or HK3 harness to do this. It would seem though that I could connect the RR2 to my DMX906S manually by wire. Agree?
My steering wheel in my camaro doesn't have radio control buttons on the right side. If i was to add them, would this allow the controls to work without having to get the BCM reflashed at the dealer?
Well explained 👍👍
Dean is the man! can i use the RR2 in my Hummer H2?
If already have the dnr1007xr in my gmc sierra do I still need to purchase the extra wires harness if my radio already works with my steering wheel buttons? I got a harness when I installed my radio and everthing works fine. I just want to be able to control my climate and be able to see my gouges. My factory buttons and chimes still work just fine
Does it retain brake services and hill assists for jeep cherokee 2015 with any car audio with an idatalink port?. Thank you
Does this work on the Toyota Rav4 EV this is an all Electric Car. I am missing my extended charger function as well as others.
I am just trying to purchase what i need to for a radar detector to be connected to my kenwood stereo but am having issues finding what i need can u help
If you need to update the firmware before they add the bluetooth functionality, would you have to open up the dash again? Only thing making me want to hold off on this since it's been so long without that update :(
Do both the rr and rr2 retain the factory Bluetooth setting from my 2014 my link radio on my camaro? Or just the rr 2
Hi. Does they do this for mazda 3 2015?
13:35 I believe you mean low wattage/amperage, these outputs are 12v right? Oh, they're ground. Thanks for always putting out excellent content.
Will maestro work and be bypassed if reset and not reflashed if attached to harness?
So if it retains the backup sensor in the maestro unit, does that mean head units with a separate backup or parking break wire do not need to be wired or are they still required to be hard wired to the appropriate points in the car's wiring system?
what are the other three wires on the Configurable Output Harness? I don't see this harness anywhere in the instructions... Obviously white/red is output 1, white/blue is output 2, and white green is output 3..... BUT what are brown/white, blue/red, and blue/yellow for? THANKS for any help!
Do they have one for a 2018 Nissan Versa S model.
Will idata do a kit for the newer dodge cars with the 8 inch screen.
thanks for this vid. do you have any info on the RR and connecting to the OBD2 port ? are OBD2 port splitters ok to run? i would like to connect the RR module and also the COBB AP to my OBD2 port and also have the OBD2 port available for a 3rd plug if the dealer or my tuner needs to access it without unplugging the splitter. thanks !
Do you have a video of the escort 360c install?
I'm thinking of buying that product, but what other product can I use for the harness, I got a Genesis Coupe 2013 with Infinity amp.
I have a Pioneer 4200nex and waiting to receive my Idatalink Maestro RR. If my car comes with factory Navigation will it work on the Pioneer 4200nex or would I need a Pioneer Avic U260/U280 to have Navigation without using Android Auto?
Is this a good solution for a pesky 9th gen accord (2014 Accord EX) since the menu has an option for a secondary vehicle display? I want CarPlay but my radio and iMid interactive capabilities make it less easy than I thought it would be. Any help is appreciated.
I'm having the Kenwood DMX1057xr installed soon. Crutchfield suggested the PAC so I bought one. I returned to the website and it's suggesting the iDatalink Maestro RR2 Interface Module. Do they work the same for my 2005 Chrysler 300c? I'm confused now. I want to keep all factory functions SWC etc. I'm running out of time. I need to have all the parts for the installer. Anyone know?
First, I say thank you for the very informative video! I do have a question tho! The Maestro RR/R2 will be connected to my OBD port. I sometimes use that port tune to my truck with a Diablo tuner, if I remove the connection from the RR or RR2, will I have to reflash or will it cause any issues with the pre-existing programming of the RR/RR2 once the services are reconnected?
Can you use the maestro rr and the Rockford fosgate dsr1 at the same time. Because I wanting to use really nice and fancy kenwood excelon dnr radio and aftermarket amps and speakers.
Have you had any of the Maestro rr2 cause issues with power side steps that use the door latch grounds to activate?
Hello guys love your work I have a question I have a 2017 Lincoln MKZ with the Sync Radio I was trying to see if you know any company like Maestro that makes install kits for my car and do Maestro makes wiring harnesses for my car
There is no data maestro for my 2014 lexus rx 350. i want to take out the factory oem screen, and replace it with a kenwood excelon double din headunit. I only want to retain the climate control features, as i would be using a aftermarket amp for my aftermarket speakers. What options do i got?.
Can i use a idatalink maestro rr instead of a rr2 to connect my pioneer dmh7600nex unit to my escort redline 360c radar? Or does the escort redline360c needs the idatalink maestro rr2 to connect to the pioneer unit? thanks looks forward to response.
So I'm assuming I need to rr2 for my 2018 dodge challenger but if I want air controls I need someone to install software?
How is the 3 MPOs differ from what you can do on an OBDeleven using long coding or one of its apps? Is it essentially the same thing, or are these MPOs vastly more customizable and gains access to more than what an OBDeleven can access through OBD2 port?
very useful video!
Where did you find the compatible list for radar, cause the 360c isn't listed. It's the 360ci thats listed. Unless they added to the list.
I am planning to buy an Alpine ILX-F309 that uses Maestro and getting a dash kit from Metra. Is it better to buy a dash kit from Maestro to be able to use Maestro to its full capabilities? Thanks in advance!
Brilliant stuff.
hello I have a master rr in a 2011 tahoe truck and out of nowhere the screen turned off and it no longer turns on is there any way to turn on the master rr since the fuses of the stereo and the master rr do they work?
Does it retain xm radio like the PAC interface?
Is it possible configure Maestro RR ona a different car out of the compatible list? In other words, Can I configure Maestro as an universal steering well?
Is there a website that says what vehicles will work with this? The newest vehicle in our home is a 06 outback.
Im glad we have units like this to toss the Uconnect and likes of ford/gm preinstalled trash that comes in newer cars.
Want this for a 2001 Mustang along with excelon hu... think it will work?
these units are great but !! what if you are updating an older vheicle like a 2001 mercedes s430 that a similar buss system does myestro make a device that can control older cars ?
What is the purpose of the CAN BUS with these Maestro units? If one was to purchase an RR or RR2 would the extra $100 difference be worth it for the additional BUS? Purchasing a iData K150 kit with a Pioneer AVIC-NEX8000 but am unsure as to which Maestro unit to get (RR or RR2)
08 Silverado 1500 LT1. Pioneer avh-2330nex. What else do i need to achieve this level of badassery?
In your experience, which Maestro & related components are compatible with a C5 Corvette?
can I use those MPOs for pre programmed climate settings?
Hey man, any reason my head unit ( Kenwood DMX-1057XR) will randomly reboot (once in a while) w/ the obd2 connector connected. 2009 Tundra. When I unplug the obd2 connector, I dont have that problem. Using Rr w/ T01 Harness, NOT Rr2. I used the same module w/ my Alpine halo 9 f309, and the unit will reboot (randomly) as well. Any help will be appreciated.
So this is compatible to the pioneer 8500ex? Im using it on my 2012 silverado
Hi is there anyway to install this idatalink maestro module in Honda Accord 7(2003-2007) dual zone AC to retain the climate control info in Alpine or Poineer head unit. Any electrical modification in writing is possible as myself is electrical engineer
Is the ADS-MRR2 going to release this year or the next?
Will this rr2 work on my 2003 hummer h2?
You could have created that circuit off the reverse wire for the reverse lights right?
Ι drive a Nissan XTrail (Rogue) Japanese specs. Maestro company told me they are not selling it to me because they are not sure if the unit fit my car model. Watching your video I noticed that the unit can connect as a stand alone. Is this possible with my car? Thanks
can the idatalink maestro RR2 work with brazilian taramps?
You can use a Windows VM with VMWare Fusion or Parallels Desktop. However if you are on a M1 Mac you are SOL since the iDatalink software is x86 and not ARM
Can any one tell me if the rr will work with 2014 Nissan Maxima S model with the alpine ilx f309? And what features I'm going to get, can i control my a/c heat from the alpine screen? I checked on there website the don't even have maxima! So please help me guy's please Thank's
Can u post a video showing how to wire a non rr compatible radio and flashing procces
Where you buy rr2
Can you set up a maestro rr from a tablet?
I know I'm late but WHAT IN THE WORLD IN THE NORMAL/HOLD BUTTON FOR ON THE GAUGES?!?! I CAN'T FIND ANYTHING
Is this compatible with a 2010 Honda accord?
Will it flash a Ram Promaster 2019? 😢
Can you use an idatalink dash kit without having an idatalink compatible stereo? I really like the way the dash looks but the stereo I want isn't idatalink compatible.
I wonder if theyll make it available for 00-06 tahoes/Silverados. Would be nice to get things more up to date. Love my escort redline and like the idea of a remote display to the screen.
@jamesstephenson2346
2 жыл бұрын
No. The vehicle isn't capable of it.
Where/when can I buy an RR2? My online searching has not proved successful!
Do I need to buy a ads usb?
i wish i was near you...impossible to find installers like you. Will this work on my HUMMER H2 2003? Or any hummers?
Neither work with 2018 F150 with 360 camera & B&O sound?
Hi, Do you offer consultation services for Idatalink?