It would be interesting to see the Type C with the wing, plus modern tyres and modern brakes. And maybe we could get to see what that beast will accomplish against moderns cars in a modern track?

@3DWorldMan

2 жыл бұрын

finally, E N H A N C E D Tin Can

@GrandPrixYannick

2 жыл бұрын

I second this!

@pjludda4323

2 жыл бұрын

@@3DWorldMan P E R F E C T E D Tin Can

@jcgabriel1569

2 жыл бұрын

Basically, just get a modern F1 car, and plonk the V16 engine, and probably also gearbox, in it. Modern, wheels, suspensions, chassis, brakes, and wings, coupled with the engine's power, torque and response...

@vivos71

2 жыл бұрын

Winged sprint cars: "Am I a joke to you?"

Dear Lord... just watching a simulation of a 1930's car is terrifying. I love everything about this video, from the fun "what if" scenario, the excellent commentary, and lack of stupid music. Hats off to you, sir.

@oldschoolracinggames5729

2 жыл бұрын

you may even play online with this mode. But in rFactor, AC is horrible.

@ploppyjr2373

Жыл бұрын

Don’t listen to the guy above. Purists are insufferable. As is just fine and a lot cheaper

My thoughts on the subject is this: I think they would benefit from wings, but only slightly, especially with those tires and suspensions. And the downsides outweight the upsides... There's a reason why the 1930s is arguably called the "Golden Era of Grand Prix racing". There were several design breakthroughs that were, at times, so far ahead of the technology of the time, at times, we can be sure that they don't know the full extent of the potential of their designs! The cars were powerful and fast, and the tires became an extremely important consideration. Tires were a limiting factor to the performance of those machines. As we know, they were cross-ply design, and were pretty narrow. Now, we knew that that's not really ideal, but it is a combination of they don't really know that at the time, and the technology of the time could only allow them to do such. The tires also use canvas for its casings, and natural rubber. Synthetic rubber had been around by then, but it is still very new, and expensive to make, so it is ultimately not used on those racing tires. Thanks to the design and materials used, those tires were, consequently, pretty sensitive to heat, on fast tracks such as Mellaha (Tripoli) and AVUS, for example, it would be better if new tires were to be carefully run in before pushing, or else, they would literally disintegrate in just a few laps. But, I think it is very hard to be careful with new tires, considering that they had to deal with, at times, more than 400hp, and bags and bags of torque. The width of those tires means that there's not much lateral grip to get from them. An engineer friend of mine said that according to some sources, those cross-plies could only handle about 1g of cornering load before slipping. Also, thanks to the varied road surfaces of the track of the time, roadholding is a important thing to consider, and with all the bumpy and uneven surfaces, they tend to use soft suspensions (soft when compared to today's racing cars). The cars themselves were designed to slide around the corners, using the inherent lack of grip of the tires to, ironically, make it 'round the bends in the fastest way possible. So, okay, putting wings on them, I think, would cause the suspension to bottom out a lot, and also increase the grip, but not much. The one thing they might do, is to drastically increase heat buildup on those 1930s tires and make their life shorter. As a final thing, I think I would like to end with a piece I remembered reading somewhere. Eng. Robert Eberan-Eberhorst, the designer of the Auto Union Type D, later recalled that "if only they had those mid-1960s-era tires to fit in the D Type back then..."

@WynnofThule

2 жыл бұрын

What would help is if the tail were accompanied by shark fins. Side force doesn't strain the tires, it directly gets it's grip from the air itself.

@minmaxxer

2 жыл бұрын

@MongoWreckin consider applying for a job

@jcgabriel1569

2 жыл бұрын

@@WynnofThule I think that would on really fast corners, and straight line stability... correct me if I'm wrong, though...

@WynnofThule

2 жыл бұрын

@@jcgabriel1569 yeah. A fin above the CoG would also nullify some body roll in those high speed corners.

@flashpeter625

2 жыл бұрын

The paradigm of grip was very different. It had almost more to do with motocross or flat track bikes than with today's cars. Lateral friction was not achievable. The suspension and the whole geometry with wild cambers was such that the car would be kinda trying to dig the tire into the surface to get forwards traction. Correctly stated that the surface of racetracks was nothing like today. It was either hard concrete, or it was very rough bitumen-bound rubbish, more like a glued gravel rather than asphalt as we know it now. On these softer surfaces, the narrow and hard tires got a good bite. It is almost like thrust pointing backwards, and angling it with the whole car.

That Type C, though - when I've mastered that car, I'll know I've learned Assetto Corsa. You have to respect it at every turn, you need your concentration at 100% for the entirety of the time you're 'at the wheel'. It's so unforgiving of the slightest mistake...yet an absolute pleasure to drive when you're on your game. Too much understeer, surprise oversteer when you least expect it, sometimes it likes accelerating quickly, sometimes not, some things change but one thing stays the same - it always wants to kill you!

@sean-fw7zi

2 жыл бұрын

ive honestly prefered the Mercedes-Benz W125 over the type c it was more fun to drive for me

@danielkarmy4893

2 жыл бұрын

@@sean-fw7zi I can definitely see where you're coming from, the W125 is a thing of beauty!

@jcgabriel1569

2 жыл бұрын

That's the thing with the Auto Unions. They're not the easiest thing to drive. The driver sits so far in front, that it's very hard to gauge how much sideways you're getting. And with those cross-ply tires, it gets sideways so easily. Even back in the day, not many drivers could get their heads around it, only some of the most daring drivers of the time could really push them hard. One thing of note, though, some of the most successful pilots of the Auto Unions were Bernd Rosemeyer, Tazio Nuvolari, and Achille Varzi, all three of them were former motorcycle racers. That probably had something to do with it...

@3DWorldMan

2 жыл бұрын

this is a controller player's nightmare lmao

@X8X8X8X8X8X8X8X8X8X

2 жыл бұрын

@@sean-fw7zi Is there a quality W125 mod for Assetto Corsa? I've tried one, but it is much easier to drive than Kunos' 250F, and in no way comparable to the Type C's quality.

What if 1930s Grand Prix cars had 3-Spokes?

As Jimmy Broadbent would say: WANG

@PiousMoltar

2 жыл бұрын

MASSIVE WANG

At 90mph you are definitely benefiting from the downforce. While testing on Miatas, difference between ones with and ones without wings was pretty big on tracks with average speeds under 80mph. Formula student cars usually don't even get close to 60mph and all competetive ones run extreme aero packages.

@cademckee7276

2 жыл бұрын

Formula student cars run such big wings and aero packages to make downforce at lower speeds. The lower the speed the more aggressive an aero package can be because you don’t have to worry about drag and yes downforce makes a difference even for slower cars, in a formula car you feel the downforce start to make a real difference around 70-75 mph, obviously the heavier the car and worse the aero thats gonna get higher but it still has a drastic effect on lap times

I'd love to see how the various decades of racing cars would do with modern tires sized appropriately for the power/weight of the cars.

This man is truly asking the BIG questions of our age.

Always like the history lessons attached with the videos on this channel.

I noticed in the first lap, you were more or less guiding the car through the corner with the entire car. The second lap seemed like your steering input was more precise. I'm thinking for that track something more like a traditional F1 set up, or 60's/70's winglets and wing set up might have worked better. For several obvious reasons, all of which you have pretty much stated. But this was a very cool experiment. Very cool video.

Man your channel is so underrated, how come you have "only" 30k subs? The quality of the content is amazing and even i with 30 years as a car and racing fan and working in the busines learn something new almost every video i watch. Keep it up, this channel with explode earlier or later!

Smokey Yunick put a wing on his Indycar in 1963 and says in his autobiography that Colin Chapman studied it intensely. I've always placed that car as the start of the wing wars.

Man, I love stuff like this! It is amazing that Assetto Corsa allows you to do these "what ifs" so realistically. But that also is a tribute to your modding skills, Jake. Thank you.

I would very, VERY much like to see a Type C with an F1 style forward and rear wing so you could really balance the forces around the CG.

Fantastic video! wonderfully paced and edited, can’t wait to see more!

In updating the physics model, I didn't hear you mention drag. Just weight and downforce. Were you able to modify the drag function somehow to add wing drag into it? Seems not, because you actually hit a higher max speed with the wing than without it (162 with it, 160 without). I thought maybe your exit speed from the last corner might have been higher with the wing, but your speed under the bridge was 120mph in both cases - the same. This was really fun to watch. I had never seen this sim before. Thanks for the vid!

Bravo! Top notch, quality viewing right there. The subject material, the production, the research. Brilliant!

The whole presentation of the video and cinematography is just on point. Good job!

As usual a wonderful video, i never get enough of the historic context that you put in your productions. I think would be interesting doing something similar with another great breaktrough in motorsport, electronic aids, i'm curious to see what features like abs or slip control gave to racing cars in term of performance. Anyway, thank you!

What a great vid! Really enjoyed that, great work and keep it up!

What an awesome video this was! Great job man

the production quality is amazing holy crap!!

I'm only a third of the way through but this video is excellent. Great commentary, great edit. Great job, man. Thank you.

Your videos are so epic man. Keep 'em coming.

Great video again. Great information, great entertainment and obvious passion are what makes these videos so great. But don't get me wrong I also enjoy watching you race. A lot. I hope the 66 season is still going.

Great video, loved the thought behind it. There was a version of the Type-C which had double rear wheels which was used for hillclimbing, I wonder if the downforce along with the increased rear contact patch would have helped solve the loose rear end, especially at high speed.

@huseyinuguralacatli5064

2 жыл бұрын

dually race car 😁

Love the history in your vids man thank you

Good story... really good story, Jake! It's like a "back-to-the-future" movie of some kind.. really fascinating! Also to think, they were so close to put on the wing by real, back in the 1930!

These videos are art. So much to appreciate!

Great idea very interesting. A wing on an older model race car. Love the videos and track and car history lessons!

A really interesting test. Thank you for thinking about it and, above all, for doing it.

"The wings will blot out the sun! Then we shall race in the shade"

props for the editing. this is the first video I've watched from you and actually, I'll leave a sub here. also props for your german pronunciation (coming from a german)

Amazing video! I love this era of racing. Thanks so much!

Really interesting video! Nice done.

What a great idea for a video.nice work!

I'd love it if you'd make a video explaining how you make experiment videos like these.

Your videos are outstanding, Thank you very much making such enjoyable entertainment.

Did you change any of the car's setup except the wing? I thought that it would allow you to stiffen the suspension a bit that would help counter the top weight roll in those early bends without becoming too skittish on other parts of the track. Great video overall though, thanks for all your usual excellent output. Also 6 secs on a 3:30 minute lap isn't a small improvement, that's almost 2 secs a minute and would normally take years of development to achieve.

Didn't expect such a well done documentary with AC content. Well done! Oposite of a clickbait. Thank you very much, such a bright spot!

Wonderful video idea; it really makes you wonder why racecar designers didn't discover downforce sooner. My fave example: The Opel RAK rocket car program utilised simple wings, but primarily to keep the wheels on the ground at high speed. Most notable was the RAK 2, which reached 148 mph during a record run at AVUS in 1928 (only 60 mph off the land speed record at the time). A rocket-powered car with wings in the 1920s - it's still a futuristic idea 100 years later!

i could listen to you talk all day. love your voice and scripts. also for a non native german speaker, your pronounciation is very nice

I just love your videos, right up my alley.

Love the giant tachometer, very industrial! Very cool video, sorry I missed it originally.

Really this is brilliant content. It's fascinating to see things like this put together. This track was a good test track for it, for sure. I guess somewhere like a period Monza you would have lost out with the wing.

One of the best Video I have watched in the last few weaks realy intresting.

Another great video 👍

I live for this kind of content

I feel like the 6 seconds that you went fester is a bit skewed. The lap with the wing had some clearly faster lines. I think 3 seconds is more representable

that gap between knowing how to do it and it actually being implemented reminds me of solar panels. solar panels were invented in 1839 45 years before the internal combustion engine but it wasn't until like 2010 where it was actually being used everywhere.

@GPLaps

2 жыл бұрын

I never knew that, thank you for sharing!

Literally the quickest 22 minutes of my life. Great video.

The first half of the video was amazing, you should consider doing more exclusively documentary style videos in the future, you have great cinematography skills and a very appropriate voice for narrating that kind of content.

Well done..I enjoyed watching and listening.

@Villoresi

2 жыл бұрын

I know the spelling is different, but seeing your handle, are you a Lynyrd Skynyrd fan?

Interesting experiment, would love to have seen the data for those laps! I know you doubted it's benefit in the first part of the lap, but I noted you were already 2-3 seconds up when you exited the corner with the pot-hole, so it seemed to have gained time fairly equally around the lap. I noted you were able to brake much later into the corners (almost trial braking style) and crucially, your accelerating out of every corner was much better! I know you will get the benefits of the downforce more at higher speeds (downforce is squared with speed essentially), but that extra mechanical weight certainly helped to grip up the wheels better! P.S. amazing introduction - the cinematics were lovely to look at!

More experiments like these please!

Holy shitballs this channel is gold man... 🥇 Subbed. Keep it up man 😃

Your episodes are getting better and better and definitely crossing into the world of real racing history. But what you are leaving out was the Chaparral 2E had another innovation which cost its reliability and kept it from dominating the 1966 Can-Am season. Because of Jim Hall's connections at GM engineering as well as being an innovator, a decision was made to attempt to run an automatic transmission in the 2E, something that Chaparral continued to experiment with over the years. Without a whole lot of success... The price of being an innovator.. If they had run a standard gearbox, it is almost guaranteed the 2E would have dominated the series and downforce research and development would have accelerated that much quicker. Keep doing what you do, your series continues to improve and it is highly appreciated.

@Villoresi

2 жыл бұрын

Even with that transmission, the 2D won the Nurburgring in '66, and the 2F Brands Hatch in '67. It's still quite something to see the photos of the 2F at the '67 Targa Florio (incongruous to say the least).

Dude wtf Broadbent who, 2min of you vid blows most you tubers out of the water absolutely awesome glad I stumbled onto it this is the way to do a KZread vid & with assetto truly wicked @wacoon I love everything about this video, from the fun "what if" scenario, the excellent commentary, and lack of stupid music. Hats off to you, sir. I COULDN'T AGREE MORE !!!!

Great video 👍 quality content

PLEASE MAKE MORE LIKE THIS

I like the way you do the constipated voice to make it sound like you are talking while you drive rather than dubbing over laps that you did earlier lol. Great vid though.

How close the Germans were to discover the potential of downforce in the late 1930's? They actually discovered ground effect, and measured it in a windtunnel, but the engineers considered it a measuring error... The Auto-Union Type D slipstreamer for speed record runs was developed and prototyped in scale models to maximize stability, reduce lift, and minimize drag. One version in 1938 featured what we would call sideskirts today, and other unusually shaped body panels. This effectively sealed the floor and acted as a Venturi tunnel. They wanted more stability and less lift, and they accidentally got both through downforce. The model was measured in a windtunnel with zero lift. The rig was only set up to measure lift, not downforce. Rather than realizing that the measurement was correct, and that the model undid all of the natural lift and more, the measurement was seen as an error. At first look, they were not being too unreasonable - every single time before, they measured non-zero lift. Usually they struggled to keep the car on the ground at high speeds. Some models produced so much lift that they would take off, some would stay on the ground but unloading the wheels to varying extent, but no model ever produced downforce. Considering how brilliant and Germanly pedantic the engineers were, some of them with experience from airplane engineering, I would say that they were literally one shower-thought away from realizing what was actually going on with this model, measuring it again, and exploring it. This "accidental ground effect" version of the car was very stable in tests. And it had just a tiny but more drag than the conventional designs. So they made it in full scale and ran it in speed record attempts, without realizing what they were doing. That's the car Berndt Rosemeyer died in during a speed record run. Crosswind destabilized the car, some overloaded body panels probably sheared off, he could not catch the slide, and the car flew off the highway at a huge speed. The development of this version was discontinued. But in the midst of GP technical regulation changes between 1937 and 1938 (a switch from a maximum weight formula, to a minimum weight formula + engine displacement limit), and expected developments into the 1939 season (power-to-weight ratio was getting insane again), they had spare weight to play with. They actually considered running compact slipstreamers on some slower circuits. Porsche even submitted a viable design to Mercedes, you can find a blueprint scan under the name "Mercedes T90". With all of this, rather than strapping a wing on the car, they might have been pretty close to coming up with ground-effect slipstreamers. The next time ground effect was used, that time intentionally, was in 1960 on the insane Bluebird-Proteus CN7 land speed record vehicle, which is a story and a half in itself. And then Colin Chapman with Lotus 78, but that is a well-known history.

I'm trying to have a break from sim racing but now you have made me need to go back to AC for a classic bit of fun, that track looks amazing. What graphic settings are you running for AC?

Gotta say… Well made video👍

New subscriber here! Great video! (it would be interesting to see overlapping images of both laps…!)

Haha great video Jake. My thoughts are the height and weight of this wing would induce the car to be top heavy in fast corners. This would create more roll effectively lifting the inside wheels from the track and reducing overall grip. So sort of undoing what you were trying to do. I wonder if fitting a lower, lighter wing would have a different effect?

@benjaminrogers9848

2 жыл бұрын

This is an interesting point. Would the force from the wing help self center and offset the extra body roll? ie. The wings force points into the corner with more body roll

I love the documentary style intro

This engine sounds AMAZING!!

Good driving. Wing or no wing this is a pretty hard car and track to master

Very cool! :) I am thou skeptical of the modifications. The wing might look simple but it's still a result of many, many years of engineering. That thing produces massive downforce. With the amount of power the car has, and tightness of the track, drag means little. But just getting that much downforce in such a small package would not be as easy back then. Plus, knowing how AC does tyre load sensitivity, car in the video likely had a bit more grip than it would be possible with the tyres they had. If there is one thing studying both history and engineering taught me is that generally what we call today brilliant or revolutionary ideas were still just small increments back then. And engineers of old knew a lot more than it seems today. Most of them likely knew downforce would be good, but there would be many indirect reasons for the technology to adapt slowly. Also, when doing any reality check of car mods, downforce is the most common/biggest thing getting over exaggerated ;). Still, by virtue of "been there, done that" i appreciate the work that went into the video. Cheers!

Great vid, awesome idea. Now all wil be courious, what gain would give a proper channeled floor with huge diffuser 🤔?? Because there is a massive amount of room under the car body to attach slick spliter-side channels-diffuser assembly😁.

Bruh that looks like the coolest sprint car ever!

Finally a coffin with a wing so it can fly the driver to heaven

You're such a storyteller!

Since the weight slowed you down a bit, are you thinking of trying two smaller 60s style wings as well?

FYI at 14:38 when you read the time off, I'm assuming you got it from the clock you inserted in the top-right of the video? If so, the end numbers are the frame count, and since your footage is at 60 fps, the 48th frame is actually 48/60th's of a second, or 0.8

It would be interesting to see this car with wings attached directly to the unsprung mass, applying downforce to the wheels without causing any heave compression in the suspension.

Early day racecar drivers were crazy, that must have been scary as hell

This is tremendous. Also the fact that you can bastardize cars is also tremendous. Love it. Merry Christmas everyone.

Fascinating, I am glad they didn't figure this out until the seventies. At least we had clean slidey racecars up until then.

Great video thanks sir I love these what if Grand Prix cars😎💪✊🖖🤔

Another great study by professor Jake, keep'em coming please..... Love how at noon he changes his labcoat for a leather cap and goggles and trashes his creations around. Top dude, Top channel, Top entertainment....

Revisit with modern styles of wings, or even ground effect on the streamlined version.

alternative title:man drives plane around racetrack

I've always wondered, how do you make the needles on the dash rebound like that instead of just moving in set intervals?

@huseyinuguralacatli5064

2 жыл бұрын

me too

3:02 man that was done perfect!!

In AC the auto union is the craziest death machine ever developed for racing, but… the engine is one of the coldest sounding ever! Bruce Mclaren is the racing God.

When you do the Super mod vid you should drive at either Lee Speedway or Thompson. Used to race Lee Speedway with modifieds on NR2003 and it was always so much fun.

@GPLaps

2 жыл бұрын

I wish super mods existed in NR2003! ive been to lee many times in real life, great track

Hey great vid! Who's version of a vintage monaco do you use in AC?

Excellent video. How do you make these changes? What apps do you use? I guess this mod isn't approved by the original modders so you can't release for us to have a go

@fredscratchet1355

2 жыл бұрын

My thoughts as well

@GPLaps

2 жыл бұрын

Its a fairly convoluted process of 3d editing and compiling and physics editing. I only really go so far to make it work enough for a video, so its missing things like ai, LOD models and such. Even if I had permission from Gary to share it I would have to work on it more first

Seen that car in real live at the Klausen Memorial. It was epic 👌

Auto Union Type C: Pikes Peak Version. 🤣

Nice one. Same experiment more realistic wing?

With Super Dirt Week happening in Oshwego what a perfect time to bring up super mods

what i wonder is .. is the wing placement are impacting on the car setup .. on this exemple the wing act like a front wing with majority of the downforce focusedd on the front tyre .. if you placed the wing at the back what would have changed ?? lighter direction ? more nimble? less bouncy ?? i would love to have your opinion. greetings from france.

I’d love to see an evolution of modifieds to supermodifieds to isma supermodifieds on a track like Trenton

That driver POV in a 1930s Grand Prix car is properly terrifying indeed. I don’t think I’ll ever know how these drivers did it with such primitive tech and raw tracks

Did you add the massive additional DRAG? Doesn't seem so by your straightaway speeds....?

PLEASE do the video on ISMA supermodifieds! They are the F1 of asphalt short tracks and there are halfway decent AC mods available for them and Oswego Speedway -their home track. (Oswego Speedway has an interesting place in American racing in itself.) They NEED to get some time in the spotlight.