Make a whole video on those discarded printers. I love the knowledge that you share with us (especially the pros & cons of a printer/filament/mod)

@thenextlayer

2 күн бұрын

lol I don’t wanna burn bridges with manufacturers so I put it behind a Patreon pay wall where I tell people the good the bad and the ugly

I like resin content as a curiosity every now and then. Things like "hey, you could definitely not print this in FDM"

@jareddehart9107

2 күн бұрын

Same. Now and then. IDK like one video a month maybe? Frankly Resin printing seems more complex to me. Though that might not be the case, I'm just ignorant I think.

@yskuzi

2 күн бұрын

I love the quality of resin prints but i have the printer in my bedroom so i am not able to vent it and have a dedicated space for it.

@customlegoworks

2 күн бұрын

You really shouldn’t have a 3D printer in your bedroom.

@yobtnirp

Күн бұрын

@@customlegoworks I have two fdm printers in my room, I would never have a resin printer though

Hey I gotta say I loved this video. I watch most of your content and this one felt less scripted which I think I like more. Its really cool to see how many printers you keep and how many hours you've put on them.

If you are not connected to the Sovol SV08 Facebook users group and the chat associated with it, one of the moderators Felix is designing a high end, high flow replacement hot end that will use easily available standard nozzles including hardened, the stock heater and temp sensor, and slide into the stock cooling fins. This solves the primary issue with that printer (and the upcoming tool changer).

@Duckferd

2 күн бұрын

Why not just a new toolhead? Is it not possible or difficult to use a different toolhead PCB?

@SKPhoto816

2 күн бұрын

@@Duckferd It is possible to put any Voron toolhead on it, but you have to replace the toolhead board with an EBB36 and modify the printer.cfg The fix from Felix will be much easier for people that don't want to make such large changes to their machine.

@rcpilotjohn

2 күн бұрын

And the key is the tool changer that will use multiple stock toolheads to do multi color printing with minimal waste. While other toolheads may work in that, the docking mechanism will be designed for this one and the slip in hot end parts will make that robust. The design uses a far better linkage between the two parts than the soldered joint that is creating issues for some people.

@thenextlayer

Күн бұрын

I’m gonna do a 7 tool changer. Not stock tool heads. Stay tuned.

@rcpilotjohn

Күн бұрын

@@thenextlayer I thought your video showed several Sovol tool heads, that was why I made that comment. But plans change I guess.

Good way to explain a review of an item. More time on a machine can change alot of people's opinions as we tune them in. I loved quite a few machines where as time went on I started to dislike them (K1). Others I have hated out the box, tuned it and fell madly in love with over time printing with it (Neptune 4).

@thenextlayer

2 күн бұрын

Great point!

I'm about two weeks now into owning a Bambulab X1 Carbon with AMS. So far, it has been terrific. I hope I don't encounter the issues you did! This technology is jaw-dropping for me. I've only had one previous printer, a "Mendelmax 1.0", that I built from self-sourced parts 12 years ago. Compared to modern printers, that old bed-slinger feels like a horse-drawn wagon! I've printed PLA, PLA+, PETG, and ABS so far, all completely successful. This has made 3D printing fun again! Thanks for all of your reviews.

@arturdobrzynski6531

2 күн бұрын

Welcome to the Bambu family :)

Really interesting video! Appreciate you going through all of these. This would be a good series to revisit maybe once a year to see how your opinions have changed.

Its really great that you share your printer profiles on patreon. I dont have the same printers as you (yet) but when I buy something you use I will definitely give them a try. Keep up the great content ❤

This is an awesome comparison and I appreciate the effort that went in! I just got an x1c about a week ago and so far I love it! Keep up the amazing videos!

I like this more chill style of video

@thenextlayer

2 күн бұрын

Ah interesting thanks for the feedback. This is way less work lol.

I don't dislike resin content, it's just got less going for it after "wow look at the detail that you can achieve with resin"

Great video, really like this type of videos 😀

Love the video, great insight into what goes into owning too many printers lol. Really makes me want to build a Voron V0 and V2, opposite ends of the spectrum but both super useful. Also makes me glad I went with Bambu's P1S rather than the X1C, mine's been damn near perfect (except for the AMS getting full of cardboard spool dust), seems like they've got the P1 series way more dialed in than the X1 series

Good Afternoon Jonathan, I see you're still running an Alpha build Positron, many of the issues you have outlined have been fixed in the latest revision. We can get you the parts needed to upgrade it as needed. For context; Bed Leveling has been fixed with a Z_Endstop that makes homing more reliable. The heating issue is caused by the original alpha clip not being tight enough against the hotend, this has been fixed in release. Additionally, the Z Belt has been re-designed to be more reliable as a whole.

@thenextlayer

Күн бұрын

Nice!!! I’d love replacement parts. Ping me on discord

Great video, a lot of useful information!!! Thank you so much for mentioning me and my channel!!!

@thenextlayer

2 күн бұрын

You are so welcome!

I'm new to 3D printing, so I like seeing both sides of the fence. Resin is cool, even though it's intimidating...

Cant watch right now but I'm definitely coming back to watch this later. I built a Voron2.4 (300) last year/early this year, and it's a TANK. I literally JUST set up an X1 at work yesterday. Early like and comment to feed the YT overlords.

I have around 6000h on my Voron 2.4 R2 350mm. Added Tap, chamber heater and a ERCF 1.0. But my go to is my X1C now. I comes down to the AMS, Spaghetti detection and automatic lidar pressure advance. I recently bought a Snapmaker J1 as well to bet able to print 2 colors a LOT faster. 5-7s instead of 90s filament change time and to be able to print TPU and ABS together or use a second material as support material.

i added a p1s to my first 3d printer the cr10s pro v2, I love the cr10s reliability and huge build volume, just not the bed levelling. p1s has been game changer, its easier to use then basic paper printers from HP these days.

Follow up videos are some of my favorite. I do the same with my printers in regard to having each one for a purpose. Loved the video, and it shows how much you enjoy each printer and why. Great job! Resin and laser stuff as mentioned isn’t of much interest to me. FDM is great because the part can be done when it’s finished. Resin is messy, stinks, and has more steps after printing than my adhd wants to do after every print.

I’ve not seen a video from your channel in awhile, frankly, because it was becoming a tad to “sponsored”, rushed or otherwise inauthentic. This was a great video. I really appreciate the time and candor in this video. It’s clear that you are considering feedback and integrating it into your process. Cheers!

@thenextlayer

Күн бұрын

Thanks for that! Welcome back!

Love this video - ty!

I bought a QIDI XMAX-3 which I saw flash by in the voron section in your video. Saw the comments below about why it wasn't included in your LTR. I think mine is fantastic, best performance of all my printers. I even have a MAKERBOT T.O.M. from 2010 (Sailfish and Replicator G USB connect) that still works and a MAKERFARM i3 12" (300mm Marlin with Slic3r and Pronterface for control USB connect) with an itty bitty dual flexstruder upgrade I put on myself. Both use 3mm filament and I have never used an SD card or USB to print a file. The QIDI is by far the easiest to use of my 5 printers and the highest quality, not to mention the speed and huge build volume. I print most of my objects with ABS so need the heated chamber. There are cool spots in the chamber but I just move the model around to avoid them. Klipper is great with the network connect. I especially like the "IRON" feature in the QIDI slicer version of slic3r. Have not noticed any maintenance issues yet - other than the fact that those 1.75mm reels seem to get eaten up quickly.

I like your style and opinions.

just got our first printer yesterday(well 2nd hand😅),and this is what i want to do,promote 3d printers and filament...

Great content, Sir. Personally I'm not interested in Resin printing as I won't be doing it at home. Btw.: Just got myself the second RatRig printer. A V-Core 4 - 300. Haven't started the build yet and would love to see content about it. For me my RatRig V-Core 3 is what the Voron 2.4 is for you. A highly a reliable, fast workhorse that I'm emotionally attached to.

@thenextlayer

2 күн бұрын

Working on getting one myself…

I like resin stuff! I don't own one (yet) but always keen to look at reviews and opinions on them!

The Bambulabs are incredible machines, but for me that love having a printer that is both high performance AND highly modular/upgradable, a Voron is the better option. But if you just want an excellent tool, yeah Bambu all the way.

I'm surprised the Qidi with the heated chamber didn't make it after receiving so much hype on KZread and a lot of praise for listening to feedback and fixing so many issue, basically doing a relaunch. Did it turn out to be not that great after all?

@coyoteseattle

2 күн бұрын

I've got one; it's a good general purpose printer, but unless you're routinely printing stuff which needs the heated chamber, the Voron 2.4 does just as well, and requires less maintenance.

@thenextlayer

Күн бұрын

Electronics failed randomly and I didn’t want to pay out of pocket to replace the board so I ditched it. I did a short updating people not to bother with the machine

@Kimberlie1

Күн бұрын

Probably because he broke the machine himself and then qidi couldn't offer him a free warranty. So he started smearing qidi.😅😅

I emailed Microswiss and they are planning on a NG/flowtech upgrade for the SV-08. Once they have the unit they ordered. 😊 I think the SV-08 is destined to become the new Ender 3.

@TheOfficialOriginalChad

2 күн бұрын

The Ender 3 made waves because of how accessible it is; almost everyone has enough space on their desk for one and $150. The SV-08 is more than twice the size and more than 3x the price. It’s not nearly as accessible. Sure it’s more accessible than a X1C, but it’s larger and about the same price as a P1S. Don’t get me wrong, the SV-08 is a significantly better printer than an Ender 3

@jonathonodonnell253

2 күн бұрын

@@TheOfficialOriginalChad I meant as in mods by the community. One person put it as the poor man’s voron 2.4. Which is not a bad thing I think it will put a more than capable machine in the hands of lots of creative people.

@thenextlayer

Күн бұрын

Siiiiick

yeah, no resin for me. Luv this kind of 'hindsight review'. Much more valuable than open-box or first-use reviews. thx

@thenextlayer

Күн бұрын

Glad it was helpful! I’ll try to do more

I really appreciate the follow up here.

Would you be able to make a video about how you track your printers hours? I think a lot of people looking to get into the 3D printing business would benefit from it. Please and thank you for all the amazing content sir!

@thenextlayer

Күн бұрын

I could do a short about it it’s pretty simple they each tell you in the software

I thought my Prusa mini+ was ok, until I got Bambu X1S. Night and day. I can't see myself using inferior printer now. I am awaiting delivery of Bambu A1 mino now to supplement my printing needs. But since I don't run a print farm and x1s is super fast I don't see the reason to look any further.

4:30 me laughing like a mad man on my Prusa MK3S+ with 305 days on it 🤣

@SirLANsalot

2 күн бұрын

Meanwhile....2200 hours on my Voron 2.4 350 R2 LDO kit of my own LOL.

@thenextlayer

Күн бұрын

lol yeah my hours are distributed across the 35 printers I’ve had so they are pathetic to some

@Piotr_Czarnowski

Күн бұрын

@@thenextlayer nah its not pathethic, its still a lot of time print, you just sad it like it was something almost impossible to do and it made me laugh 🙃, just yesterday i found some dude have almost 690 days on his Prusa , damn that is almost ancient 🤣

21:31 XDDD >Teaching tech >Finishing project with success Pick one

How about QIDI Q1 Pro, it is a nice fully enclosed CoreXY printer with a gooood price.

Im printing PETG right on a fully open printer.. the Creality Ender 3 V3 SE

Looking forward to more Solvol SV08 content! That new toolhead is interesting! 😎 If you're maybe doing the toolchanger project, you might start converting it to canbus while your tinkering with the new toolhead now?

@thenextlayer

13 сағат бұрын

Way ahead of you bro

The ERCF V2 is an interesting topic for a video

I don’t mind resin stuff. I don’t have one but I think they’re interesting. I'd also like to hear about your laser cutters. I just got an xTool M1 and it’s kinda cool.

I think Anycubic made a lot of missteps with the Kobra 2, even though the hardware was technically solid. The things they've done with the Kobra 3 makes me think they've realized where they went wrong but that part of them still struggles with the sunk cost fallacy

I have a 350mm V2 and a V0. It's surprising how often a model will fit on the 120mm bed. I use it way more than I thought i would

@thenextlayer

Күн бұрын

Yep. I use the one at home so much

Irbis in TNL video😅 Nice to here that you know each other👍

Kind of surprised the X1C only has ~1800 hours on it in a year and a half. I have 1200+ since March 19th. My Voron 2.4r2 is getting less and less now.

@thenextlayer

Күн бұрын

I have had 35 printers… I’m always testing new ones then getting rid of them

I love how the thumbnail changes every day lol

@thenextlayer

Күн бұрын

Every hour, for the first few days till we find a winner

@landynmiller6750

Күн бұрын

@@thenextlayer I love it very smart

There are primarily resin channels - so I don't see why it wouldn't do well :D It is it's own area though :D What I see rarely with resin are functional prints. They print quite precises stuff but personally I have tons of issues with warping and breakage on resin prints. I'd love content that prints functional stuff in resin, that would normally be better on FDM. I have recently had a commission for airsoft parts - and my FDM was not yet in the office. So I ended up printing it in resin only to hear it broke while screwing together by the client.... I had to reprint that about 4 times by the end of it the profit was about 10 bucks before tax :D And had to do it on FDM. So it would be positively lovely to see functional prints in resin

Please Please Please do a video of all the upgrades you have done to the X1C! Would LOVE to see that, all in one combined video. :D You mentioned upgrade of PTFE tubing etc... would love to know more! :D

@thenextlayer

Күн бұрын

Most of my “upgrades” just made it worse bro. lol.

@hackiz

Күн бұрын

​@@thenextlayeroh, that's a bummer... 😂

the speed of prints now has me rating printer wear at meters of filament now. I.E. my old Replicator Dual has about 10K+ hours printing at 45mms-120mms but im VERY certain my Creality Sermoon D1 (Heavily modified) which has about 1,600 hours and runs at 200-250mm/s 5K (print speed) has printed about the same in just two years. Currently at about 10,000m of filament. About 330m per spool means about 30 spools, and 1 or two spools a month sounds right

@thenextlayer

Күн бұрын

Good point. 2000 hours on an X1C is like 6000 on a Prusa MK3S+

I had to check my MK3S and it has over 1400 days on it in the last 4.5 years. Easily my most used printer followed by my Voron 2.4 and Trident. Though the Bambu A1 Mini is getting a good bit of use lately.

@thenextlayer

2 күн бұрын

1400 days? That’s gotta be a typo… 140? Or 1400…

I have both SLA and FDM, however I haven't had a chance to use the SLA as I still need some stuff to get going with it.

Love the hair cut!

@thenextlayer

2 күн бұрын

Thank you!!

I can use my dry box with the AMS??? is that just to print a single filament like the PETG hes talking about? I need more info :P

LOVE my Bambu p1p, but the customer service is possibly some of the worst EVER of any company I have had the pleasure to deal with.

@DaveEtchells

2 күн бұрын

I’ve only needed to call on them a couple of times and had great experiences. One time they were a little slow, but they were knowledgeable, patient and dealt with my problems completely.

@cameronheinricks8571

2 күн бұрын

I agree I used to think creality was bad, then I got a Bambu..... now I know Creality support is actually decent at least compared to the non support from Bambu and run around/refusal to warranty issues.

@JojoJoget

2 күн бұрын

Seems like a hit or miss with the customer service though after a short stint in customer service, sometimes the customer is the problem.

@Mildly_Amused

Күн бұрын

After dealing with Sovol's customer support, Bambu's support feels amazingly good.

Would be great if every 3D printing youtuber made a video like that once every 1 or 2 years.

@thenextlayer

Күн бұрын

On it!

I enjoyed this video very much - thank you! I have a P1S and I have a x1 carbon arriving today. I hope I don’t have issues with it as Bambu’s customer service is the weak point of the company! Total joke. I’ve actually given up on tickets I’ve submitted.

@thenextlayer

2 күн бұрын

I usually get decent responses actually even though I don’t have a relationship with them anymore and go through the normal channels. But enjoy the printers!

Really good video! Tomorrow my first 3d printer the a1 mini arrives. Any tips?

@Yaup_

2 күн бұрын

I'd suggest looking into a print that changes where the filament loads into the ptfe tube, it's on the x,z normally but at the start of a print when the machine does its thing it'll pull some filament from the roll then go back down causing a tangle. Unless you got the ams lite then ignore all that lol

@kostis_pro

2 күн бұрын

@@Yaup_ I didn't get the ams lite

@U1TR4F0RCE

2 күн бұрын

One of the first prints to do should be some sort of poop box for the a1 mini

@kostis_pro

Күн бұрын

@@U1TR4F0RCE OK, will do. Also, may I ask a question? How print profile work and what I need to use and change?

@U1TR4F0RCE

Күн бұрын

@@kostis_pro so there are printer profiles which exist which set rules for stuff such as what is the space that the printer will try to print in, as well as speed, acceleration, retracting. People with experience may make their own modifications from the preset profiles to optimize the machine.

Have an older Ender 3. I need a reliable, affordable and prints up to 5”x5”x5”. Bamboo mini for me. Thanks.

Thanks for all the info! I’m narrowing down my options right now on the way to buying my first printer! I’m pretty convinced by the X1 Carbon, my only remaining question is: how soon do you think Bambu will release a second gen version of this printer? Seems like it may be imminent, and I’m hesitant to jump the gun (since I seem to have bad luck buying products that are soon replaced by upgraded versions). What are your thoughts?

@thenextlayer

2 күн бұрын

Second gen printer is likely coming within a couple of months from Bambu. I wouldn’t know, but… that’s my suspicion.

@carfish

2 күн бұрын

@@thenextlayer thanks for your reply! Think it’ll be at the same price point?

AND im STILL voting for build yourself printers like the Voron😤😅 Again great video mate ! and it will for sure help some newbies choosing their path ... just have to warn all newbies to be aware of - Vorons lead down a deep deep rabbit hole 🤣💀

@arturdobrzynski6531

2 күн бұрын

I built two printers. Never again. I enjoy designing, not tinkering with the printers.

@3DWolfEngineering

Күн бұрын

@@arturdobrzynski6531 😅 what happened if i may ask ?

My Bambu Lab X1C baby!!! ALL DAY!!! ...My Elegoo Neptune 3 Plus is nice too. 😑😑

Do you have an FLSUN S1 on the way? I do. But it's the one review I've been waiting for you to do! Seems like you don't have any Delta's either so it seems like it would be a good fit. It should be the fastest printer you have too, and the only one with remote cooling / a CPAP fan? It's just so different than all your other FDM printers that I'd love to hear your thoughts on it.

@thenextlayer

Күн бұрын

Nope they were going to send one but I never heard back

I'm moderately curious about the resin printers. I have a Mars 2 Pro and have just really come to hate the stupid thing. So messy and smelly. But the quality really can be amazing, so I'd be interested to see if the process has become easier with any newer machines.

14:13 I've had a great time printing petg on my newer A1 mini. Just a lot of thinner stringing but it works great!

@arturdobrzynski6531

2 күн бұрын

Stringing may be due to wet filament. Also Bambu likes to print petg hotter than even the filament manufacturer recommendations for max temperature. Funnily it gives great results. Try it.

@JustBlameShane

2 күн бұрын

@@arturdobrzynski6531 my hatchbox likes it a little bit more lower temps but I'm good with the strings especially where it was printing a skull with hair so it gave it a more realistic/messy haircut lolll But for more solid stuff I do have the dryers ready to go

Would be interested in projects that leverage laser cutting/engraving and FDM printing

The AMS problem you are having... I just finished with support for the SAME problem. I my case is resolved itself when I replaced the motor. Might want to try that first.

@thenextlayer

Күн бұрын

Yep. Same. Fixed it.

hi, im 15 i also live in israel and I want to get into 3d printing but the prices here are not the same as in the us so when outher KZreadrs says that some printer is a budget 3d printer it may be very expensive and not worth it so what 3d printer would you recommend me to buy at a good price here I care about size but also speed ...and if you intend to sell some... tell me.......

Can you please give me a link to the stl/3mf of the fan shroud you are using on your p1s with the panda revo? I run dual aux fans BUT the stock fan shroud nor a lot of the 360 shrouds work well with the revo and with the blow down pattern on that shroud I would like to use it. Thank you!

@thenextlayer

Күн бұрын

Its stock?

@ItsTyIRL

Күн бұрын

@@thenextlayer Then I must be mistaken but at 8:43 in the video it looks like you have a fan shroud that looks to be 3d printed and of carbon fiber filament of some sort.

1100 hours onnn my X1C, not a single problem. You got unlucky.

@thenextlayer

Күн бұрын

Only on one of them!

18:02 I have the regular SV07 and I've just had random bed shifting where the print shifts 1 layer. Still looking into it for the problem but when it works *chefs kiss*

@thenextlayer

Күн бұрын

Tighten the belts or increase Z hop

@JustBlameShane

Күн бұрын

@@thenextlayer sadly tried both and it still had this problem. Only thing I could come up with is the actual timing belt pulley is messed up. It's like randomly shifting at the Bed so I'm hoping to get that changed out and it's good to go

Yeah I'm annoyed enough at the little bits of proprietary BS in my SV08 which I've barely used because of the 0.4 (and why should I when my X1C with a 0.6 is so much faster). With my X1C I tolerate the proprietary bits because most of them are either totally out of the way and they work. That Anycubic machine sounds like it needs to be dumpstered publicly as an example.

This video is a game__changer! __ "Believe in yourself, and you're halfway there.."

As much as i would like a bamboo, i don’t like my printer connected to the internet

Im looking at building a position LT with full time portability (i do almost as much driving as i do sleeping toddlers am i right?) And was wondering with your bed leveling issue if its the V3 and the IR sensor on a glass bed issue? Bc ik with the LT version they are trying to convert to a touch probe or micro sized clicky

@thenextlayer

2 күн бұрын

It has to do with the folding and unfolding throwing things off not hardware

Do you feel the Revo upgrade to the P1S was worth it? I'm debating on doing it to one of mine.

@thenextlayer

2 күн бұрын

Yeah I think so, if you are gonna have other revo nozzles on other printers especially. If not, you can also do that AliExpress hot and or just buy stock hot ends and swap. I think you need to do a cost analysis of all the nozzles you want and what it’ll cost from each ecosystem. If you have other printers though, getting them all on revo is a no browner.

Where did you get the file for the spiderman at 12:25 i cant seem to find it

A1 mini is great. How did u get the hours. I can’t find it band Bambu said u can’t. So curious how u did?

@thenextlayer

Күн бұрын

It was on the screen deep in the menus actually

I would love to send you one of my machines or at least one of my motion systems that i license /sell to other oems . We have our own extruder,hotends,servos,full billet 6061t6 components and we have voron compatible gantry systems but as far as i nkow i am one of the smallest companies to have vertical integration vs using ots parts.

how do you keep your air clean at home. My son want to put the 3d printer we have at work in the house and take it to college with him and I am wanting options to keep the air clean.

@arturdobrzynski6531

2 күн бұрын

Most people say that open windows work the best. Very mixed opinions on the air purifiers. Especially the customer grade ones which apparently according to some don't catch and filter vocs toxins. I asked the same questions on one of the 3d print groups a few days ago, so relay the anwers.

all printers are interesting to me, tho It will be a long while before I get into resin

You should do toolchanger on svo8, but not sovol toolhead. I think you can replace electronicxs if needed. The frame is useful

@thenextlayer

Күн бұрын

Way ahead of you bro

@C650101

10 сағат бұрын

@@thenextlayer Great. Vid soon?

Dude, you’ve got to do your MK 3+ justice and go purchase the 3.5 upgrade. I just did it and it’s phenomenal. 250 bucks and you’re basically getting a brand new printer. It prints twice as fast and if you tweak things a little, you can approach the Speeds of a core xy. And of course because it’s a Prusa the print quality is phenomenal.

@thenextlayer

2 күн бұрын

Hmmm maybe but I can’t justify spending money on it when I get so many free printers and have a long wish list of video gear to improve the videos…

@arturdobrzynski6531

2 күн бұрын

For this much money you can get Bambu A1 and still keep your Prusa. No need to keep throwing more and more money into the machine you already have

Uhm. A resin print video now and again would be nice.

? Petg prints fine on my A1mini - tho you may mention not all spools fit on the ams lite, as the centre is not always big enough

@thenextlayer

13 сағат бұрын

In my climate I can’t leave PETG out in the open for more than an hour

@user-uf8nn6he3e

12 сағат бұрын

@@thenextlayer my country average is 8% higher than yours :s maybe cz I buy the cheapest PETG it's cut with other random stuff? When not in use I store it with 100G fresh silica per spool in a dry bag - could that mitigate issues?

I hope in my 3d printing journey and content creation , I hope to have your problem of too many printers lol...TikTok is growing fast but its slower here on the tube.

I’m dying for teaching tech to finish the tool changing video i want one so baddddd

@thenextlayer

Күн бұрын

I’m gonna build one too but not with Sovol tool heads

@jb6042

Күн бұрын

@@thenextlayer Sweet! Do you have it planned out yet (build wise) or are you waiting till the current one is fixed? Hopefully i can get my hands on a svo8 soon before they get too popular with all these cool videos!

sv07 reliable? to be honest i had more hussle than printtime on mine , maybe reliable: if your lucky to get a proper working model in first( mine came with broken extruder, ripped of cable on the thermistor and few other problems and i know other ppl with same issues) , 2nd you know klipper ( what i didn´t had only marlins befor). so if it runs it prints well "IF"...... sold my sv07 and bought A1

@thenextlayer

2 күн бұрын

Sorry to hear that. Mine was awesome. Maybe they cherry pick…?

@aeppikx

2 күн бұрын

@@thenextlayer maybe ? dunno xd i mean your sponsort by sovol can think of that they would give you a garbage machine to promote them. but to a good point sovols customer support provided me spare parts and a completely new toolhead for free. BUT that took almost 4 weeks. the completely wrong calibrated klipper config which my machine had was not provided i had to fiddle myself or better sayd got one working from github

@aeppikx

Күн бұрын

@@thenextlayer maybe xd wouldnt make sense to sponsor ppl and give them not working machines to promote them ^^ but to a good point , sovol provided me all spare parts i needed and a completely new toolhead etc for free but that took almost 4 weeks

I’m still curious if the hydra mod for the AMas is worth it. I’ve been tempted to try it.

@thenextlayer

2 күн бұрын

Honestly I wouldn’t do it again. Just respool filament

@LordWiseWolf

2 күн бұрын

@@thenextlayer that’s good to know. Think I’ll try respooling. Got any good videos on how to respool? lol

Hi. Would you like to test my design for K1. Basically it is new hinge door system to make life easier.

@thenextlayer

Күн бұрын

K1 is gone :)

Im curious why you got rid of the qidi xmax 3 and why it isnt very popular. It is my first printer so i have nothing to compare it to, but I love it.

@thenextlayer

2 күн бұрын

I did a KZread short on it. Board fried, and they wouldn’t or couldn’t replace it because I’m in Israel… didn’t want to bother with it

@Deltazor

2 күн бұрын

@@thenextlayer lame! Thanks for the update! I've worked with them and they have sent me (US) free updated parts on various things.

@Kimberlie1

Күн бұрын

He received the machine for free, then broke the motherboard himself and wanted Qidi to provide him with a free warranty. I don't think qidi needs to take responsibility for the creator's own modding mistakes. So he started smearing qidi stating that he would never trust their machines again. I think it's ridiculous buffoonery.

@Kimberlie1

Күн бұрын

Because 1) he wanted qidi to give him all the accessories free of charge, and 2) to arrange for immediate shipment to him during the war. 😂

bambu needs bigger printers with less vfa. 235x235 is not enough for anything storage related.

GREAT channel!! The Patron link in the description does not work (at least from DK) it returns a 404.

@thenextlayer

Күн бұрын

Works for me?? patreon.com/thenextlayer

@PeterFrandsen87

14 сағат бұрын

@@thenextlayer weird. The link in your comment works but the link in the description still gives me a 404. I can’t see any difference in the two links. Anyway your patron is easy to find so not a big issue

How can I find out how many hours my printer has on it?

@thenextlayer

Күн бұрын

Depends which one

Great video as always! Re: Bambu, can turn off the build plate and AI crap. And also adjust the AI sensitivity as well. I have it set pretty low and it seems to work pretty well. For whatever it’s worth, in the industrial equipment world (like tractors, generators, etc), it’s typically thought of that 3,000 hours of run time is its effective life and the max that a lot of people will keep a piece of equipment. Past that and you should expect to rebuild engine, hydraulics, etc. Since I’ve learned that, gives me some good perspective on run hours for 3D printers.

@thenextlayer

2 күн бұрын

Oh wow 3k hours is NOTHING though. I’m way past that on my Prusa with no failures. I think 3D printers (good ones) might have a different standard. I’d love to hear from Prusa how many hours they put on each machine before fixing or swapping

@yayinternets

2 күн бұрын

Dang it, now that I think about it, I was talking to a farmer about it but he likes to get rid of equipment at around 3000 hours before it starts to depreciate too much. I went to look it up, and apparently modern machinery is more like anywhere from 8-20K hours.

How can I find out how much hours my P1S has?

@thenextlayer

Күн бұрын

It’s in the menu system on the device

Now I know I will buy another P1S next time not the X1C

@arturdobrzynski6531

2 күн бұрын

I got x1s. Super happy with my choice only because I had disposable extra money to spend on extra UX features . P1S is great, so no need to get X1S.

Vorons are great machines…a pitty that they are such a pain to assemble

Build the Proosa with your mk3

@thenextlayer

Күн бұрын

Wussat

@Dead_Aim556

Күн бұрын

@@thenextlayer uses most of the mk3 parts to make a core xy Prusa with massively better cooling speeds etc. an improvement in almost every way. Check with Hector @fabreeko

@Dead_Aim556

Күн бұрын

@@thenextlayer open source project that uses all the mk3 parts to convert to corexy. Huge improvement in every way. Fabreeko sells a kit

What's with the thumbnail? Lmao.

With the amount of printers that there are and are constantly coming out, I wonder if this is damaging the field as a new user will be faced with choice and information overload and just give up before entering it

@TheOfficialOriginalChad

2 күн бұрын

Welcome to earth. Wait until you see the automobile or phone industries.