wonderful video!! Not new to Silhouette but new to the 5. Thank you for all the testing

Thank you so much for all this great info!!!!!

@silhouettesuccess

8 ай бұрын

Thanks for watching!

Wow, vielen Dank für das tolle Video. Grüsse aus der Schweiz

Thanks!

@silhouettesuccess

7 ай бұрын

Thank you so very much! 🥰

Can you make a similar video for the curio 2, please?

This video was helpful. Would it be able to etch very thin aluminum? The Curio would be perfect for make a stencil cut, but I would only need to scrape the top to make a simple design.

@silhouettesuccess

8 ай бұрын

The website says you can etch on metal. I think they show a picture of a dog tag. I haven't tried it yet, though.

@ForOrchestra

8 ай бұрын

@@silhouettesuccess good to know. I’ve seen etching videos on machines as far back as the Cameo 2 and Cameo 3. And they say that the Cameo 5 is 20% more powerful (or something like that). So it should be doable. I was concerned about voiding the warranty if it’s not allowed, but it should be fine. Thanks for the videos.

@silhouettesuccess

8 ай бұрын

@ForOrchestra oh, so I'm still half asleep, apparently. The Cameo is not meant to engrave. The Curio is. I didn't look to see which video you were referencing. So sorry. The new engraving tool is only for use with the curio. The cameo can use the embossing tool, but I haven't ordered that one yet.

do any of the Silhouette machines allow for cutting of edible paper. Like for decorations for cakes and or cupcakes?

Would the silhouette 5 be able to cut velboa/cuddle fabric? I’m awful with scissors, so having my cameo do instead it would be a real blessing.

@silhouettesuccess

6 ай бұрын

Possibly, but you would definitely need the rotary blade and a strong grip mat. Keep in mind that you will get hooks and loops with the rotary blade. They look like a mess on the send screen, but they don't interfere with the cut elements. I have successfully cut felt, so the thickness should not be an issue. The only concern is that the cuddle fabric is not as stiff and may move around a bit.

Qu- I tried to cut Glittered craft foam using the Kraft Blade 3, but it’s not cutting nowhere near through the material, could you give me some advice as to what settings I should try, and do you think that possibly, any other blades might work? If so what would you suggest.. Thank you!!

@silhouettesuccess

8 ай бұрын

With the Kraft blades, you have to adjust them manually. Tighten the cap and check the depth against the side of the material. Once it looks deep enough, give it a try. Check the cut before you unload the mat. If it did not cut through, increase the force and try another pass.

@samanthaamaddox8505

8 ай бұрын

@@silhouettesuccess thank you so much!! I guess I thought the Kraft blade 3 was auto adjusted! It does give the settings on the screen, but I will check this!! It almost had cut thru but never went all the way through the foam.. Thanks again!!

Hello. Thanks for the video. I have a question, can we upload our own images to print t and cut with this machine?

@silhouettesuccess

6 ай бұрын

Sure can! I use my son's artwork all the time. Here's a video showing how. kzread.info/dash/bejne/aop3rJWOo7m0dpc.html

What happens when you put 100 force? lets say for chipboard or acetate? Also, where do we find information about which blade to use for which tool and which pass to use and what blade depth? I believe cricut tells you before cutting.

When using the craft foam are there any indentations from the roller bar in front?

@silhouettesuccess

8 ай бұрын

I didn't notice any, but I wasn't specifically looking for them. If you use craft foam and this is an issue, slide the rollers to the right, off of the foam. Most craft foam is letter size or smaller.

Hello! I have a question .... Do you know if the different blades of the cameo 4 are compatible with the cameo 5?

@silhouettesuccess

8 ай бұрын

They are! I've used the auto blade, the kraft blade, and rotary blade. They all worked perfectly.

Should I purchase the deep cut blade or kraft blade to cut heavy chipboard using the cameo 5? Thank you

@silhouettesuccess

4 ай бұрын

The kraft blade is recommended for chipboard, but depending on the thickness and density, you might be able to use the deep cut. If it's under 1mm, I'd try the autoblade first.

I’ve had one on preorder since the week it came out(Australia). I’m now a bit disappointed. The noise itself seems identical as well. I thought it was quieter?

@silhouettesuccess

7 ай бұрын

Really? I think the 5 is a lot quieter than the 4. It's definitely still not silent, though.

Original Cameo user here (And had the original before the first Cameo lol). Finally upgraded for Christmas. Still waiting on it to arrive. I'm curious what the story is behind the loops when using the craft blade?

@silhouettesuccess

6 ай бұрын

The kraft blade and the rotary blade do not turn in the housing like the autoblade does, so it has to go outside of the design and make its turn, then come back to move on to the next cut. It looks like a mess on the send screen, but I've never had it interfere with the actual design elements.

@melaniearrowood2221

6 ай бұрын

Interesting. Thanks for the explanation!@@silhouettesuccess

Hi, do you know when the cameo 5 will be an available option on the silhouette go app. I just switched from cricut to silhouette and was disappointed that the new machines do not work with the silhouette app yet.

@silhouettesuccess

5 ай бұрын

I don't have dates, unfortunately. I've heard rumors that they are currently working on it, but it's strange because that's one of the things that they talked about at the conference. I thought it was ready to go when they released the machines.

@silhouettesuccess

5 ай бұрын

I don't have dates, unfortunately. I've heard rumors that they are currently working on it, but it's strange because that's one of the things that they talked about at the conference. I thought it was ready to go when they released the machines.

@shannonstubbs6990

5 ай бұрын

@@silhouettesuccess thanks for getting back to me! Hopefully there will be an update soon. I'll keep my eyes peeled! For now I will keep practicing with studio. Thanks again for your help!

They said it was quieter than the other models..It doesn’t sound like it is to me..Not sure if it’s worth upgrading yet..I’ve considered the solo,but hear nightmares with the software..and not sure about the Juliet or Romeo..Time will tell if I stay with Sil or not..I let Cricut’s go,well,mine are paper weights now..and cameo is causing me issues now on my 4..Not sure what the issue is but it won’t load media,won’t connect etc..

@silhouettesuccess

8 ай бұрын

I came over from cricut because of their software. The cameo 5 is quite a bit quieter than the 4. Demonstrating that on film isn't easy - mostly because I know more about silhouette than I know about producing videos. Lol. Are the problems with your 4 consistent, or just every now and then?

Thank you so much. I'm looking to buy Silhouette Cameo 5. I want to cut 1mm self-adhesive magnetic sheet. I want to place a 180gsm photo paper with matte lamination on the magnetic sheet. Can the silhouette 5 to such depth?

@silhouettesuccess

3 ай бұрын

It should work, but you will need a deep cut blade or kraft blade. The autoblade will only cut 1mm.

@saranyabalaji3122

3 ай бұрын

@@silhouettesuccess Thank you for your time! Your videos have been very informative.

What about cutting sheets of up to 0.04" (1 mm) polystyrene? Can it do this?

@silhouettesuccess

3 ай бұрын

I haven't tried it, but from what I've read from other users, you can.

What kind of chipboard was used for the testing?

@silhouettesuccess

22 күн бұрын

I used the Silhouette brand. I bought it from Michael's.

Hi, I saw that the heavy cardstock setting was 80lbs. Have you tried cutting 110lb cardstock? Do you know if it would cut 110lb heavy cardstock? Thank you

@silhouettesuccess

7 ай бұрын

It should cut just fine, depending on how fibrous the cardstock is. I would actually start with the heavy cardstock setting and bump the blade up only if necessary.

@PlanningWithK

7 ай бұрын

@@silhouettesuccess thank you so much 🫶🏼

@silhouettesuccess

7 ай бұрын

@PlanningWithK you're welcome! Let me know how it goes.

@PlanningWithK

7 ай бұрын

@@silhouettesuccess new subscriber here! 😊

@silhouettesuccess

7 ай бұрын

Awe! Thanks 😊 and welcome to the community!

What card stoick did you use? In my experience, there is a big difference. Also, what is "over cut"?

@silhouettesuccess

5 ай бұрын

I typically use Recollections from Michaels. Over cut is a feature in the Send Panel. It tells the machine to cut just past the corners and it helps to get cleaner cuts.

@pattyh2410

5 ай бұрын

Thanks!@@silhouettesuccess

Maybe I missed it... could you tell me what thickness chipboard you were cutting? Thank you.

@silhouettesuccess

6 ай бұрын

The listing for it says .022"

@saladlamp2092

6 ай бұрын

Thank you!

Pls update cutting area 13"

can cameo cut ivory 260 gsm paper??

@silhouettesuccess

2 ай бұрын

It should. You'll just need to find the right settings. It'll probably take at least a couple of passes for a clean cut.

But does the Cameo 5 work with the paper feeder? The most important part for a small business? :)

@silhouettesuccess

8 ай бұрын

Sure does.

Thanks for that. Rather disappointing I was expecting better results. Still noisy but not screeching. I have owned 2 Cameos and they have both been really temperamental - looks like this one is too.

Are you using a Mac or a PC? I updated my Mac desktop and laptop Monterey 14.1. Now it does not support the latest version of the Silhouette Studio design program. As a result I cannot use my Cameo 5.

@barryh1947

8 ай бұрын

I think that version 14.1 is Sonoma, their latest OS. You would have to check with Silhouette whether Studio can run on Sonoma. I'm still on Monterey 12.7.

@silhouettesuccess

8 ай бұрын

I'm using a PC. I have been told that you can download version 4.4.554 and that will fix the issue, but you need 4.5.700 to run the new machines. It is a mess, and they are working on it, but unfortunately, at this point, that's all I know. Can you revert to the old software for the Mac?

@loribee9383

8 ай бұрын

@@silhouettesuccess Thanks. If the issue is not resolved by mid November as promised I will do that.

@loribee9383

8 ай бұрын

@@barryh1947 Good to know

Is cameo 4 blade works on cameo 5

@silhouettesuccess

2 ай бұрын

Yes, it is the same.

hi, cameo 5 cuts balda wood, if yes, you can make a video about it

@silhouettesuccess

6 ай бұрын

It can, but it does not do a great job at it. You would use the kraft blade, and I think there are settings for it in the software. I'll definitely put it on the list for future videos. It might be a while, though. Minor family crisis hit right in between the holidays, so everything has been thrown off schedule. 🙃

@annunziatasessa8352

6 ай бұрын

@@silhouettesuccess thank you very much, don't worry whenever you want...

@silhouettesuccess

6 ай бұрын

@annunziatasessa8352 I love video topic suggestions. Sometimes it's hard to come up with topics!

@annunziatasessa8352

6 ай бұрын

@@silhouettesuccess 🥰🥰😘🙏

india price ?

@silhouettesuccess

7 ай бұрын

I'm not sure on that. I'm sorry!

Until silhouette get to a blade that can cut real Leather, then not worth the money, we are on cameo 5 and they still not got to grips with it😳

@silhouettesuccess

8 ай бұрын

I think the issue was more in the consistency of the leather. Some areas seemed much denser than others. I think it would have eventually cut through, but I personally was out of patience. Anyway, it almost seemed like a force issue. And if that's the case, then it's going to take a commercial machine. That was my first time cutting genuine leather, so I'm definitely not an expert in that area.

Waiting for India launch

@silhouettesuccess

5 ай бұрын

How do you have the patience??

Thanks!

@silhouettesuccess

7 ай бұрын

Thank you so much!! 🥰

@PlanningWithK

7 ай бұрын

I have a quick question... My Portrait 3 reads the square registration mark when place on the left or right of the paper. Does cameo 5 only reads it if it's on the left? Do you know? Thank you so much! @@silhouettesuccess

@silhouettesuccess

7 ай бұрын

@PlanningWithK I've never tried that. How do you get it on the right hand side?

@PlanningWithK

7 ай бұрын

@@silhouettesuccess I cut all my stickers with the mark on the other side 🫢 and the cameo 5 would not read.. so I changed and it worked.. If you turn the page to be landscape the square goes to the other side.

@silhouettesuccess

7 ай бұрын

Is that just a thing with the Portrait? I'm so confused. Lol!! I print and cut landscape all the time and I've never seen the square on the other side. 🤷‍♀️