Woooo, you are amazing. Congratulations 👏⭐️⭐️⭐️⭐️⭐️

Beautiful work! Thanks for sharing!!

@Theleathercraftacademy

7 жыл бұрын

Thanks a lot!

a cool piece.

❤❤❤🎉Bravo bravo !

ขอบคุณครับ ชอบมาก สวยงาม thank you

Muy prolijo me encanto gracias por compartir

cooollll 👏👏👏

Good work

Buen trabajo...

Let us know on which topic you would like to see a video tutorial on the KZread channel and patterns on the website am-leathercraft.com/

Uivo bonita Parabéns pelo vídeo. Já me inscrevi no seu canal.

I ve just bought the pattern. 2 questions : the prong distance and thickness of the thread? Thanks for sharing your work.

@Theleathercraftacademy

Жыл бұрын

I usually ditch l stitch 2.5mm from the edge

good job😚😚😚

@Theleathercraftacademy

7 жыл бұрын

Thanks!

@joemaiyusof

7 жыл бұрын

👍👍👍👍👍

Like that

Where could I get one exactly like this to buy

V nyc card

@Theleathercraftacademy

6 жыл бұрын

What is a V NYC card?

Excellent video! Thanks for the list of tool links; very helpful. I've bookmarked your page of patterns; thanks for that link as well. Question: what is the overhand tool you're using from 0:28-0:45? I've rewatched that section several times and can't make up my mind if you're beveling or creasing. ;) I like the look of that particular tool.

@Theleathercraftacademy

6 жыл бұрын

Thanks for comment! The tool you are referring to is a crease, check the video I have made about it: kzread.info/dash/bejne/jK2uzNN8d6bJmpM.html

@tedhobgood

6 жыл бұрын

Thank you so much for taking the time to reply; much appreciated! I'm off to watch your video! :)

You have the best tools. Super quality. Where do you purchase your tools? and What brand is your Skiver? Lori L

@Theleathercraftacademy

7 жыл бұрын

Most of my tools come from Blanckard, some of them are linked in the description. The skiving machine I use is from Nippy.

Hi. Thanks for sharing, nice work. What is the thickness of the leather you use for this project?

@Theleathercraftacademy

5 жыл бұрын

The leather used is about 1.2mm thick

@Sattrecamuss

5 жыл бұрын

@@Theleathercraftacademy Thanks a lot.

@lbdeuce

2 жыл бұрын

@@Sattrecamuss i used 5oz for the large bit and 3 oz for the other 2. if i were to do it again i would do the same

What’s the green board used underneath the leather while cutting which has some graduations on it pls suggest me where to buy it n what’s it called

@haroldhesterly2892

5 жыл бұрын

It usually is called a "self healing" cutting board. It protects the knife's cutting edge and you can purchase from most leather craft suppliers like Tandy Leather.

Do you deal in the wholesale?

where do you get the edge creaser from? fleabay doesnt seem to know what they are :-)

@Theleathercraftacademy

7 жыл бұрын

Please check the link in the description for tool links. Iron are from Regad.

Hello,i would like to ask how thick is the electric creaser you used for this product please ? 1mm, 1,5 mm, 2 mm, ?? Thank you !

@Theleathercraftacademy

6 жыл бұрын

The reference from Regad is FN2, the crease is in fact 2mm from the edge and the stitching 2.5mm

@mzorgias

6 жыл бұрын

Thanks a lot !! Great !!

NEW, the pattern is now available in acrylic here am-leathercraft.com/collections/acrylic-patterns

Nota 10.

When did you wet the leather, nowhere on the video was it wetted.

Link to the tool I use in the description above, video on tools here: kzread.info/dash/bejne/ia6eq7dqaJvJkrw.html

seems like it might be prudent to tell people they can use a stack of business cards for the molding step instead of needing to make a special insert,

@Theleathercraftacademy

2 жыл бұрын

Even better to use a stack of old credit cards in my opinion, as business cards are commonly made of paper. Wet leather and paper is not the best combination. In any case I would recommend the use of a mold designed for this particular purpose for serious makers. Here is the link to the mold am-leathercraft.com/products/acrylic-mold-to-make-leather-card-holders-10-x-5-x-0-7-cm?_pos=2&_sid=dbff972d8&_ss=r

@lbdeuce

2 жыл бұрын

@@Theleathercraftacademy agreed

Why was this video called Wet leather Molded ? I did not see any water .

@Theleathercraftacademy

6 жыл бұрын

Sorry Yes, you are right, I have lost the footage where I am wetting the leather. In fact I did it just before I put the card holder on the mold. Soak the leather until it becomes really pliable, just a few seconds or until you see the leather has well absorbed water.

i want to buy this one, how can i get this?

@Theleathercraftacademy

7 жыл бұрын

Email me at info@am-leathercraft.com

Is the top part ‘wider’ then the under part?

@Theleathercraftacademy

6 жыл бұрын

Yes, I cut it trim having assembled the top part. Just to make sure edges are flush.

@audiodogz9488

6 жыл бұрын

The leathercraft academy what do you use to stich it i would.like to get in to this kind of trade but would like to know what is best be for i start

I thought molded like posible pouch some how?

what tool are you using in the beggining ?

@Theleathercraftacademy

7 жыл бұрын

+Dumitru Cojocari you might be talking about the electric creaser. I am preparing a video talking about it.... coming soon

What's the machine for at 1:36? I can't figure out it's purpose.

@Theleathercraftacademy

7 жыл бұрын

This is a skiving machine, I use it to make the edges thinner.

عمل جيد

May I know where did you get that card mold?

@Theleathercraftacademy

7 жыл бұрын

I make it laser cut. That's acrylic. You could also make it in wood.

@NinjaHempKnight

6 жыл бұрын

The leathercraft academy what are the dimensions of the mold? If I wanted to have one cut from acrylic what dimensions would I give them? Thanks

What kind and weight of leather do you recommend for this?

@Theleathercraftacademy

7 жыл бұрын

1.2mm thick

@Kristiweiler

7 жыл бұрын

Bridle leather? Veg tan? Thank you!!

@Theleathercraftacademy

7 жыл бұрын

Veg tanned leather.

I am confused on the tittle. Wet ?

Nice project, but I must be missing something here. The title refers specifically to wet molding but you never took the time to cover it in the video. I did see you insert a form near the end of the video, but if you moistened and formed the leather around that block it was left out of the final edit. While that doesn't take away from the finished product it did mean 3 and a half minutes and no coverage of the wet molding. "Making a card holder" would have been a more appropriate title.

а выкройкам есть?😇

@Theleathercraftacademy

7 жыл бұрын

Sorry I don't speak russian :(

@TheOshMart

7 жыл бұрын

he is asking patterns.

En español mmm ?

NICE: HAND UP AND SUSCRIBE!!! +1

@Theleathercraftacademy

7 жыл бұрын

+Leather Workshop thanks a lot!

what kind of stitch irons are you using?

@Theleathercraftacademy

7 жыл бұрын

I am using Vergez Blanchard #8 Pricking iron 2 teeth #8 Vergez Blanchard: amzn.to/2khId5L Pricking iron 5 teeth Vergez Blanchard#8: amzn.to/2kU1SKM