Get your business online with a free trial of Shopify! shopify.com/beardedmechanic/ I did what the fans wanted even though I wasn't a fan of it.
Жүктеу.....
Пікірлер: 1 100
@spadac454314 күн бұрын
He might not have needed to pull the bottom end apart but I'm glad he did. Definitely learned a lot of how the bottom end of a bike works.
@FlipsGTS
13 күн бұрын
exactly.... i just screamed he should do it because i knew how awesome and knowlegdable the resulting video would be...and it sure as hell was
@_Shinasu
13 күн бұрын
Not only that, if it's not your engine I'd imagine it would be safer than sorry to do a full breakdown. Doesn't hurt to have full confidence in the state of the engine
@danielwaddell123
13 күн бұрын
He found a couple of loose bolts
@jeffh8803
13 күн бұрын
Its rare to get a youtube channel thats enjoyable to watch and also takes time to thoroughly explain things. I get some Mustie1 vibes from this channel.
@Joseph-ew6ou
13 күн бұрын
@_Shinasu he had full confidence. A little ware on the bearing was absolutely no issue but replace since it's open.
@ryanfaircloth556214 күн бұрын
I love the way Craig explains everything. I've been riding and repairing my own bikes for almost 30 years and I can always learn more from Craig's explanations! Keep up the great videos gentlemen!
@ThirstyFoe00
13 күн бұрын
With detailed explanations come little questions and even less doubt.
@rickburnout666
13 күн бұрын
It's about 45 years for me, I wish they had KZread in 79 when I started riding & taking motorbikes apart 😂
@frantisekkmotrik5063
13 күн бұрын
@@rickburnout666nebylo potřeba KZread,lidé k sobě měli blíž sdíleli si zkušenosti a fungovalo to taky minimálně u nás v Československu 👍☝️😉
@rickburnout666
13 күн бұрын
@frantisekkmotrik5063 It probably wouldn't have been so good back then, we only had a black and white TV and I was the remote control 😂
@fteoOpty64
13 күн бұрын
Craig is a master builder in the most practical sense. Any can fully trust hit with a motor repair. He explains thing so clearly, it sounded simple but the amount of work is not to be underestimated. Great work.
@sn99cobra14 күн бұрын
I think "dad" wanted that engine overhauled so that he would be getting a very reliable birthday gift!
@lifted_above
13 күн бұрын
I mean, who wouldn't want a chance at a turbo Hayabusa for birthday?
@williamcolon5393
13 күн бұрын
Is "dad" yammy noob?
@VroomNDoom2602
9 күн бұрын
@@williamcolon5393 Good ol' Papa Yams
@Tronic_Rider-kl9cu
2 күн бұрын
@@VroomNDoom2602😂
@LordRahl1114 күн бұрын
There is a reason why everybody needs a Craig! If he says the bottom of the engine doesn't need to come apart I believe him.
@Decade_of_the_Dawg
13 күн бұрын
He does seem trustworthy. He won't try to sell you blinker fluid or something like that.
@wadewilson6628
10 күн бұрын
Then you're dumb.
@user-rs8bb1hb2e13 күн бұрын
Craig you would be the ideal high school automotive teacher. The attention to detail and explaining every little thing is priceless.
@mattwebb17214 күн бұрын
I can't believe people question this man, he obviously knows what he's doing, very experienced mechanic and doesn't need telling how to do his job especially with 30+ years experience,full of motorcycle knowledge and I'm always learning by watching him, explains things very clearly. Thanks bearded mechanic.
@paladinfalke4926
14 күн бұрын
He tends to cut corners alot, trust me every professional would have taken that bottom end apart without question. Plus he admitted he didnt like how the crankbearings look so changing them was good even if he doesnt like to admit it
@Q.7
13 күн бұрын
@@paladinfalke4926Example?
@camacdav000
13 күн бұрын
@@paladinfalke4926I would love to see some of yall “mechanics” do work & record & upload here. & really see if guys are as professional as yall sound😂 & can take on people telling you what to do
@hoodedgood
13 күн бұрын
@@Q.7he gave one.
@Q.7
13 күн бұрын
@@hoodedgood No he didn't.
@jayglanville858514 күн бұрын
I laughed out loud at 7:40 when Craig was talking about prying. I had an aircraft tech rep years ago whose favorite saying was "Resist the urge to pry".
@Odder-Being
10 күн бұрын
When he said "don't pry they give you these lips" The cover is still on when the camera cuts away. Next shot the cover is in his hands. The question is, what happend in between :P
@davereeves1967
10 күн бұрын
@@Odder-Being he used the lip...
@user-cv3gb6lg5j14 күн бұрын
Ooh! That was some fine video editing when Craig took the clutch bolts out. ,,,right with the fine guitar pickin'. I'm entertained!!!
@1970HondaCL10014 күн бұрын
If my bottom end needed tearing apart I’d call Craig.
@JLCraig58
14 күн бұрын
😂😂😂😂
@mementomori4972
14 күн бұрын
I see what you did there,...very kinky indeed.
@andrewhunter8928
14 күн бұрын
Yuck 🤢
@ayushkaushik8794
14 күн бұрын
Bruh stop making stupid comments on this channel atleast 😐
@NathansWorkshop
14 күн бұрын
Phrasing?
@Daenschi14 күн бұрын
Such a humble mechanic, please continue doing what you do!
@wadewilson6628
10 күн бұрын
I don't think you know the definition of humble. He was bragging how good he was and knew more than everyone throughout the whole video.
@raynyhus202614 күн бұрын
As a retired mechanic, I learned a long, long time ago to never second-guess or nit pick another mechanic. What goes around comes around. Learned that almost 40 years ago as an 18 yr-old nube who thought he knew everything.
@Valverde713
11 күн бұрын
This is very true. Though nower days everyone's a critic
@wadewilson6628
10 күн бұрын
If someone isn't willing to take criticism, that's not a personality trait to emulate.
@oldguysrule589514 күн бұрын
That was GREAT! I grew up with gear heads (dad, two brothers), but I didn't get that gene....I know how an engine works but it was fantastic to see you walk through it in real detail....and with such good humor. Thanks.
@pascaldesnoeck867114 күн бұрын
Hello Bearded Mechanic Family all the way from belgium, have a very nice weekend
@Papa-kj3eh
14 күн бұрын
Home of thee waffle. No.
@bigliftm
13 күн бұрын
Hey Urbanuske wha doeede gij hier met oewh cecemel on de rocks ? 😜🤣 groeten van dees kaaskop uit holland
@user-ge1dc1cm4e
13 күн бұрын
Greetings from Austria ✌️
@Mrzoux113 күн бұрын
Now that’s dedication to the fans and your dad, taking it appart when you don’t want to, and we’re glad that you did, super interesting! Can’t wait to see the rest
@scottlofgren684513 күн бұрын
Hands down best motorcycle youtube channel. Craig and Dan commentary is on point
@sanjotorek862714 күн бұрын
I discovered this channel by accident. I am not particularly interested in motorcycles, but I am fascinated by the mechanical work, the explanations, and the overall approach to problem-solving. Any mechanic could learn from this channel. I have definitely subscribed!
@uahoe14 күн бұрын
Inspired me to buy a 1989 k100 sitting since 2012. Love this channel
@bookofrevelation492414 күн бұрын
A notebook and pen in shirt pocket is handy to make notes when pulling things complicated apart, to have instructions when putting back together, especially for bad memory abilities.
@stein.b.andersen
14 күн бұрын
A KZread video can also help. ;)
@bryanjessdenio1292
14 күн бұрын
I personally take pictures.. lots of pictures
@Thatonefuckinguy
14 күн бұрын
thats what the youtube video is for. And also 20 years of experience from what he said at the beginning of the video. That also helps.
@MKnife
13 күн бұрын
@@bryanjessdenio1292 Definitely this! I even have a separate phone with an ok camera just for that purpose.
@thatrealba
13 күн бұрын
We have phones with cameras for that since.. oh.... 2010ish.
@revtoyota13 күн бұрын
I look at it like this. If an engine had something like this happen to it, it is always best to tear it down and know it is good rather than hope its good.
@bmxiggy14 күн бұрын
ive been working on Motorcycles and small engines for years. i love how you explain everything and take everything apart in order
@alfafan16413 күн бұрын
I've been watching you fixing bikes for a while now, and I feel I must say you make motorbike mechanics interesting, I can't begin to understand half of what you say after ,but at the time I understand what you mean ....sign of a good teacher 😊thanks for all of your videos ,keep them coming 😊
@TheHatevessel14 күн бұрын
I only discovered and started binge watching you last week, when I was stuck in bed being ill. This is my first update as a subscriber and I was excited to see it drop. Love your work, cheers from the UK
@skylertooley
13 күн бұрын
I envy you for being able to binge it all, now you gotta wait with us!
@2coolwheels13914 күн бұрын
Thanks for the tour of the Busa internals. I've done quite a few bike engines, but not one of these.
@brentbauer825814 күн бұрын
Ahhhhh yes you call from dad, changes everything 😅 This is not about the bottom end, this is about a son saying seeee I told you so😂
@yourundoing1214 күн бұрын
Great video - loved the procrastination counter reappearing 🤣 One of the hazards about being careful about remembering how it came apart, is an assumption that the last guy to work on it knew what he was doing!
@rayhai6781
14 күн бұрын
Got my GSF1200 engine apart completely since a few months now...but I think I get it all together again, it's not that hard to be honest, if you pulled it apart by yourself, my car engine was apart for over two years, put it all together with stronger new parts and didn't need to think a second longer when putting it together...but if someone else tears something apart and you need to put it together, it can get hard, especially if you never ever does something like that^^ tl;dr: Looks difficult, if you never done it before
@gdfggggg
13 күн бұрын
Very true. Worth double checking in the manual.
@backyard_mechanic14 күн бұрын
I just want an episode of bearded mechanic vs armchair mechanics lol Also I have found as soon as I put the offer for someone to come do it themselves they go awfully quite haha
@jasondunn889413 күн бұрын
Not a mechanic but love this breakdown/explanation of how the engine works. I am new to the channel and love your excitement every time you get a bike to run like it’s your first. Thanks guys 👍
@murdoc650113 күн бұрын
A master class in motorcycle engine teardown...with absolutely engaging explanation and commentary. Translated, Craig and Dan are awesome (even Greg)! Go Bearded Mechanic, keep moving forward!
@iakazul14 күн бұрын
I don't even own a motorcycle but I really enjoy watching you work on bikes
@The_Bearded_Mechanic
14 күн бұрын
Thanks!
@eis7713
13 күн бұрын
you will end up owning, atleast one. trust me.
@nshaw-ly4yb
11 күн бұрын
If you ever take the plunge, buy a working bike first, then buy a project bike second lol
@eis7713
10 күн бұрын
@@nshaw-ly4yb thats a solid piece of advice. You always need to have a daily rider. Good thing with bikes is that you can have many. Instead of one car, you can have 3-4 bikes. 👍🏻
@MatteoGuarducci13 күн бұрын
The coating is made out of graphite and other dry lubricant materials. It is not for heat transfer. This coating usually helps lubricate the engine during the first start after reassembly.
@schafer24013 күн бұрын
The piston coating is for lubricantation and break in, if it was a heat coating it would be on the top, not on the skirts.
@goodcitizen6413 күн бұрын
Thanks Y'all. I spent my working life as a automotive technician but I don't do bikes other than fluids and brakes...very basics!
@johnpetyo121613 күн бұрын
Hands down the best MC Mechanic out there!! Learn something every time. Have an '02 Busa myself. Everyone needs a Craig!!!
@JeffKopis14 күн бұрын
19:00 Still, it IS a good thing you went in, for the "soft" pistons, the galled wrispin, and the wear on the rod. So it WASN'T a waste of time. And I learned a lot. So thanks, Chief 😊
@KrabbelarsKrabbe13 күн бұрын
Love how craig explains and show us how to tear apart engines and restoring bikes! Looking forward to all videos coming out
@swannyaymer523014 күн бұрын
Started watching your channel and im absolutely hooked best KZreadr for me 2024 keep it going man...
@Myrussell6714 күн бұрын
This is absolutely my favorite channel that I am subscribed too. Dan cracks me up and your knowledge of motorcycles is very impressive. I also love your personality Craig. GOD BLESS!! Would be cool to meet you someday.
@ironhorse758814 күн бұрын
Great run down Craig. I always enjoy learning from your videos. Thanks for making it fun and educational.
@manray00513 күн бұрын
I really appreciate the depth and time for the explanations. I am not a mechanic and have limited knowledge on how things work. Thank you for explaining things so well that even the newbies understand 😊
@nicozimmermann867213 күн бұрын
I´m halfway thru the video and i´m as always blown away by the knowledge this man has. Plus the nicest and most chill mechanic i´ve ever seen. Thank you so much for explaning all of this so well.
@TRextheCat14 күн бұрын
I have never been interested in motorcycles in my whole life but you guys are amazing!! I subscribe to lots of different channels and you are by far my favorite channel of them all, I drop everything when a new video drops. You guys are funny as hell and it is so entertaining watching you work on engines/bikes... love the channel and keep up the good work Dan & Craig!!
@chrisjohn410113 күн бұрын
Split a few crank cases in my time but you make it sound so logical and simple to understand - one of your best vids yet. Tried to order a T shirt but postage to us here in the UK is as much as the shirt itself and I honestly cannot afford it, will put it on my Christmas list though !!
@oldschool494213 күн бұрын
I'm impressed with your knowledge and tenacity in rebuilding different brands of motorcycles! That being said, it would be much easier to remove a stud from an engine case using the double nut method instead of a pair of pliers or vice -grips. This also results in no damage to the stud. Finally, getting a Shop Manual for the Motorcycle being worked on can save you a lot of trouble, like the "Hidden Bolt" holding the engine cases together! I know these things after working on Suzuki Motorcycles for more than 50 years!
@oldbearbrian14 күн бұрын
Thanks for the explanation of how the clutch works... not being a mechanic, I had never noticed how the alternating pads connect to the inner or outer baskets.
@Huffnutz1714 күн бұрын
That gear indicator is like the Tormat system in an old jukebox. It's how records were selected by the mechanism.
@mortaljorma69
14 күн бұрын
That is usually broken too. Mine was aswell.
@stuartcarter705314 күн бұрын
I've never understood how a clutch works until I watched this. Great video
@bewareofmountainlions442913 күн бұрын
Craig, im so glad I found your channel. Your videos are some of my favorite on youtube. I love all the interesting projects, and variety you get in your shop. Really happy to see your continued success on the platform. Keep it up ❤
@ufh832614 күн бұрын
Editing on this video was super good, can definitely see the progress. keep it up!
@TobiasStevens13714 күн бұрын
The genius is back, while he didn't even leave us. Always good!
@jeevespreston13 күн бұрын
It’s always a great day when there’s a new Bearded Mechanic video up. Thanks Craig and Dan for the excellent content and the instructional style, learned a lot!!!
@timp139013 күн бұрын
Brilliant video!! I know nothing about engines and that was a fantastic walk through of relationships between the various pieces. Nice work oh bearded one 👌
@ryandoyle434414 күн бұрын
Best merch plugs ever! Simple, unobtrusive and funny.
@CoryRoy13 күн бұрын
Nice editing to get the clutch cover removal via impact wrench to match the music! Next level stuff!
@davidstanfield93829 күн бұрын
I worked for a Kawasaki shop, for around 20 years. I've rebuilt many engines and transmissions. Craig, does a great job of explaining things.
@zomboo6413 күн бұрын
Man you are the absolute best. Love the videos especially as a young guy working on my own bikes. I go to fix one thing and break 3 more but im learning along the way. In a future video when you use a torch, could you explain when it’s safe/when it’s a bad idea? There’s been a few times where I’d like to heat something up so it eases out but I think im going to light up my whole bike.
@grabir0114 күн бұрын
I run around 8:1 compression for my Turbo bike.
@2MinuteReview14 күн бұрын
0:58 seconds in and I'm really hoping that bottom end is FLAWLESS
@mymysgaming685813 күн бұрын
Excellent video! I’m excited for this as a more in-depth engine study. It completely doesn’t seem necessary from Craig’s perspective but I view it as 100% educational knowledge. Thanks a lot Craig and Dan for this channel.
@chriszasada975614 күн бұрын
No metal until looking at the top end pieces , great video can't wait for everything to come back for the rebuild
@huntor360614 күн бұрын
Funny how everybody became an expert mechanic in the last episode's comment section
@Gideon_Judges614 күн бұрын
Oh man I was waiting for the next installment! 👍🏻👍🏻
@familytrieserichiltz94013 күн бұрын
1 minute and 4 seconds of bonus Craig thoughts were much appreciated.
@augierluis12 күн бұрын
Loving every part of your videos, huge learnings. Thanks for sharing all of your knowledge. Big fan here.
@grabir0114 күн бұрын
Start with lower boost and do plug chops along the way as you increase the boost.
@drtcurt14 күн бұрын
never doubt your Craig.. He always knows best..
@mt011513 күн бұрын
Thanks for the explanations you do along the way, I’ve ridden since 1969 and along with my father, friends and bike shop mechanics showing and telling me engine things I have a good idea on how things are put together. Having said that, I’m no mechanic and always approach engine repairs slowly and and carefully. You clearly know your stuff and I appreciate learning more through your videos, thanks again for that. 😎🍺☮️🇨🇦
@jeffreyreichert8513 күн бұрын
I kind of agree with Craig that the bottom end probably didn’t need to come apart because of metal. However, I think taking it all the way down is always the right move as you can’t be sure who was into an engine like this before you and what quality of work they performed.
@charles-alexandremattelaer462314 күн бұрын
Can't wait for the followup video already ❤
@Kymccaffery13 күн бұрын
Dan, your editing skills continue to impress! Great to see you play with music and cuts when Craig is removing bolts on the clutch. Keep up the great work gentlemen!
@baklys13 күн бұрын
Hi Greg, I have been looking at a lot of your videos. I know you get a lot of comments from all the experts around. I have been working on bikes and cars for 40 yrs, and I am actually a really good mecanic. But you are a real EXPERT!!!
@rickh838013 күн бұрын
Great stuff as always. You're like the best Shop Teacher ever. Thanks for sharing guys. Take care.
@DJEvover14 күн бұрын
Had a good laugh at the "reticulating splines" reference.
@tthams7312 күн бұрын
“Should be fine”. “I know when a bottom end needs to come apart.” Are you using the force?
@stevenfortier643613 күн бұрын
Wow, you do a excellent job explaining how and why it works. .... Thanks
@MKnife13 күн бұрын
I especially liked the clutch removal part with the zip tie tip. I need to pull the clutch on my high mileage 2008 busa soon, as the gear position sensor sends random numbers to the display occasionally. A part known for failure and fairly easy (but annoying) to replace. I'd recommed replacing it on that as well if it looks even a bit suspect. Thanks for another great video and a shout out from really faraway Finland!
@Jenuin14 күн бұрын
10:20 😅 every time Craig straightens his glasses 🤓 I think of a moose 🫎 😂❤ 🫲 🤓 🫱
@The_Bearded_Mechanic
14 күн бұрын
I lol'd
@turner022413 күн бұрын
I can’t help but laugh, I was 11 years old my dad came home and there I was on the floor with my 1968 Honda S65 all apart. Had literally had for only a couple days, he looked at me and said “ you already broke it ?” No pops I wanted to know how it worked. “ ok then tear it all the way down son “ replace everything……(gaskets, o rings etc ) ha ha 56 years later still tearing up ha ha
@weiswurst666
9 күн бұрын
But did you get it back together?
@turner0224
8 күн бұрын
@@weiswurst666 Oh absolutely, being Mr. Anal I had everything put in it’s place . Found out earlier rebuilding Briggs & Stratton that there should be no left over parts when done ha ha ha
@davidwilliams4845
8 күн бұрын
Reminds me of my first car at age 16. I had inherited the family '69 Chevy Nova with a straight six. The oil was a gray sludge, which I was told meant that the head gasket was blown. My Dad could never find the time to help me, so I tore into it on my own. I had ZERO clue how to do it, but I was determined. I did the whole job, but not knowing any better, I didn't clean the sealing surfaces properly or check that they were not warped. Worse, I had no idea about how to properly torque the head bolts, so I ended up more or less right where I started. If I'd've had KZread back then, I think I could have taught myself how to do it.
@ndadson13 күн бұрын
Was great seeing someone explain all this so clearly. Thanks Craig!
@Altanabstick13 күн бұрын
Subbed! So much knowledge, just enough sarcasm and a lotta fun to watch. I wrench myself and have a cylinder revision on my hands. Your vids help me translate theory to practice. Very cool!
@anomalouswoof255412 күн бұрын
If for no other reason than to check the rods, yeah, you gotta take the bottom end apart. Sorry Craig.
@adylevene431814 күн бұрын
I nearly crapped myself first time I rode a busa, another cool vid Craig.
@Try2KeepUpK13 күн бұрын
Metal shavings aside. Thank you for showing us all and explaining it. I'm sure I speak for many when I say it's very appreciated. 🤘🏻
@craigwac556710 күн бұрын
I have been working and riding motorcycles since 1990. I recently retired from federal law enforcement, specifically to pursure my new dream. I started last week as a motorcycle apprentice mechanic. I love these videos. The shop i work at is very similar to the atmosphere in Craig's shop. I am so excited to go to work now. Its like Christmas when a bike xomes in for service. Opening presents everyday. I love it.
@yammienoob13 күн бұрын
I very much appreciate you pointing out the high quality parts we installed!
@razor1uk610
13 күн бұрын
true, shame some of the reassembly done by yourself or your previous mechanic were found to be loose, real good work there (sarcasm mode active).
@lewhanna611213 күн бұрын
Excellent information, but I agreed with Craig in the first video. I'm a retired motorcycle mechanic, I would not have pulled it apart. I definitely would have recommended a new cam chain, just as Craig said.
@wadewilson6628
10 күн бұрын
Then you're dumb. Is he working flat rate? Why not pull it apart. Now you know. And he did find damage.
@JohnDoe-zo5tu13 күн бұрын
You are an incredibly talented mechanic and I learn so much from you. I wouldn't hesitate one second to have you wrench on my bike.
@Bold_as_a_Lion12 күн бұрын
That was really cool to see how the clutch and the gears work. Love this channel! Great work!
@gixxerofsweden940913 күн бұрын
This is the best content by far out there that i've stumbled on. Cheers!
@coconutcreampie379514 күн бұрын
Thanks for the follow up on this one.
@stuartessenhigh279314 күн бұрын
Craig & Dan, you are legends and made my day again. Thank you😁
@twt37165 сағат бұрын
I'm from the UK and I love this channel. Not only do I learn something new in most cases, but I also get to see snippets of real American life. In a rapidly changing world it's nice to know there are still genuine mechanics out there working on genuine old bikes made from metal and runner and leather. Nothing remains the same anymore, even transgender people ain't what they used to be.......
@hagenlefarth679913 күн бұрын
Love your channel! Awesome fun and informative! Hy from a German CBX 750 FII rider!
@chrislatchem18546 күн бұрын
Learn so much from your vids! Still amazed at memory of where, what fits! And great tips re keeping parts together with zip ties.
@gregferris937813 күн бұрын
I am amazed at how complicated that whole process of tearing it down is. I am sticking to my single cylinder Briggs & Stratton engine on my lawn mower.
@mattivirta
8 күн бұрын
very simple, busa have high tech but normal MC engines have super simple repair and tear and make, not need engineer or doctor be, haha. i tear and repair my first MC engine totally off all and change some parts and make all back has 12 year old and first kick run fine. simple repair MC or olden car engine. new car need many know how torque and timing system more know, end lot elektric need know today. i love repair all old MC engines simple easy job.
@Umbearwithme14 күн бұрын
Freaking great walk-through. Appreciate you providing the details
@darrengarvie883213 күн бұрын
Craig you explained it so well thank you
@elickes13 күн бұрын
It didn't "need" to come apart, but in the long run, you'll be happier to have done it. Thanks for putting a link in the description down below!
@jberejik13 күн бұрын
Amazing video. Thanks for the explanations while tearing it down!
@alanblenkinsop277513 күн бұрын
Love your breakdown video so much info craig for the people that arnt mechanically minded keep the videos coming mate great work 👍
@mattstakeontheancients759410 күн бұрын
Love the breakdown. Own a motorcycle and just learning engines so watching the engine getting broken down is great. Also cool learning Craig is a 40k fan.
Пікірлер: 1 100
He might not have needed to pull the bottom end apart but I'm glad he did. Definitely learned a lot of how the bottom end of a bike works.
@FlipsGTS
13 күн бұрын
exactly.... i just screamed he should do it because i knew how awesome and knowlegdable the resulting video would be...and it sure as hell was
@_Shinasu
13 күн бұрын
Not only that, if it's not your engine I'd imagine it would be safer than sorry to do a full breakdown. Doesn't hurt to have full confidence in the state of the engine
@danielwaddell123
13 күн бұрын
He found a couple of loose bolts
@jeffh8803
13 күн бұрын
Its rare to get a youtube channel thats enjoyable to watch and also takes time to thoroughly explain things. I get some Mustie1 vibes from this channel.
@Joseph-ew6ou
13 күн бұрын
@_Shinasu he had full confidence. A little ware on the bearing was absolutely no issue but replace since it's open.
I love the way Craig explains everything. I've been riding and repairing my own bikes for almost 30 years and I can always learn more from Craig's explanations! Keep up the great videos gentlemen!
@ThirstyFoe00
13 күн бұрын
With detailed explanations come little questions and even less doubt.
@rickburnout666
13 күн бұрын
It's about 45 years for me, I wish they had KZread in 79 when I started riding & taking motorbikes apart 😂
@frantisekkmotrik5063
13 күн бұрын
@@rickburnout666nebylo potřeba KZread,lidé k sobě měli blíž sdíleli si zkušenosti a fungovalo to taky minimálně u nás v Československu 👍☝️😉
@rickburnout666
13 күн бұрын
@frantisekkmotrik5063 It probably wouldn't have been so good back then, we only had a black and white TV and I was the remote control 😂
@fteoOpty64
13 күн бұрын
Craig is a master builder in the most practical sense. Any can fully trust hit with a motor repair. He explains thing so clearly, it sounded simple but the amount of work is not to be underestimated. Great work.
I think "dad" wanted that engine overhauled so that he would be getting a very reliable birthday gift!
@lifted_above
13 күн бұрын
I mean, who wouldn't want a chance at a turbo Hayabusa for birthday?
@williamcolon5393
13 күн бұрын
Is "dad" yammy noob?
@VroomNDoom2602
9 күн бұрын
@@williamcolon5393 Good ol' Papa Yams
@Tronic_Rider-kl9cu
2 күн бұрын
@@VroomNDoom2602😂
There is a reason why everybody needs a Craig! If he says the bottom of the engine doesn't need to come apart I believe him.
@Decade_of_the_Dawg
13 күн бұрын
He does seem trustworthy. He won't try to sell you blinker fluid or something like that.
@wadewilson6628
10 күн бұрын
Then you're dumb.
Craig you would be the ideal high school automotive teacher. The attention to detail and explaining every little thing is priceless.
I can't believe people question this man, he obviously knows what he's doing, very experienced mechanic and doesn't need telling how to do his job especially with 30+ years experience,full of motorcycle knowledge and I'm always learning by watching him, explains things very clearly. Thanks bearded mechanic.
@paladinfalke4926
14 күн бұрын
He tends to cut corners alot, trust me every professional would have taken that bottom end apart without question. Plus he admitted he didnt like how the crankbearings look so changing them was good even if he doesnt like to admit it
@Q.7
13 күн бұрын
@@paladinfalke4926Example?
@camacdav000
13 күн бұрын
@@paladinfalke4926I would love to see some of yall “mechanics” do work & record & upload here. & really see if guys are as professional as yall sound😂 & can take on people telling you what to do
@hoodedgood
13 күн бұрын
@@Q.7he gave one.
@Q.7
13 күн бұрын
@@hoodedgood No he didn't.
I laughed out loud at 7:40 when Craig was talking about prying. I had an aircraft tech rep years ago whose favorite saying was "Resist the urge to pry".
@Odder-Being
10 күн бұрын
When he said "don't pry they give you these lips" The cover is still on when the camera cuts away. Next shot the cover is in his hands. The question is, what happend in between :P
@davereeves1967
10 күн бұрын
@@Odder-Being he used the lip...
Ooh! That was some fine video editing when Craig took the clutch bolts out. ,,,right with the fine guitar pickin'. I'm entertained!!!
If my bottom end needed tearing apart I’d call Craig.
@JLCraig58
14 күн бұрын
😂😂😂😂
@mementomori4972
14 күн бұрын
I see what you did there,...very kinky indeed.
@andrewhunter8928
14 күн бұрын
Yuck 🤢
@ayushkaushik8794
14 күн бұрын
Bruh stop making stupid comments on this channel atleast 😐
@NathansWorkshop
14 күн бұрын
Phrasing?
Such a humble mechanic, please continue doing what you do!
@wadewilson6628
10 күн бұрын
I don't think you know the definition of humble. He was bragging how good he was and knew more than everyone throughout the whole video.
As a retired mechanic, I learned a long, long time ago to never second-guess or nit pick another mechanic. What goes around comes around. Learned that almost 40 years ago as an 18 yr-old nube who thought he knew everything.
@Valverde713
11 күн бұрын
This is very true. Though nower days everyone's a critic
@wadewilson6628
10 күн бұрын
If someone isn't willing to take criticism, that's not a personality trait to emulate.
That was GREAT! I grew up with gear heads (dad, two brothers), but I didn't get that gene....I know how an engine works but it was fantastic to see you walk through it in real detail....and with such good humor. Thanks.
Hello Bearded Mechanic Family all the way from belgium, have a very nice weekend
@Papa-kj3eh
14 күн бұрын
Home of thee waffle. No.
@bigliftm
13 күн бұрын
Hey Urbanuske wha doeede gij hier met oewh cecemel on de rocks ? 😜🤣 groeten van dees kaaskop uit holland
@user-ge1dc1cm4e
13 күн бұрын
Greetings from Austria ✌️
Now that’s dedication to the fans and your dad, taking it appart when you don’t want to, and we’re glad that you did, super interesting! Can’t wait to see the rest
Hands down best motorcycle youtube channel. Craig and Dan commentary is on point
I discovered this channel by accident. I am not particularly interested in motorcycles, but I am fascinated by the mechanical work, the explanations, and the overall approach to problem-solving. Any mechanic could learn from this channel. I have definitely subscribed!
Inspired me to buy a 1989 k100 sitting since 2012. Love this channel
A notebook and pen in shirt pocket is handy to make notes when pulling things complicated apart, to have instructions when putting back together, especially for bad memory abilities.
@stein.b.andersen
14 күн бұрын
A KZread video can also help. ;)
@bryanjessdenio1292
14 күн бұрын
I personally take pictures.. lots of pictures
@Thatonefuckinguy
14 күн бұрын
thats what the youtube video is for. And also 20 years of experience from what he said at the beginning of the video. That also helps.
@MKnife
13 күн бұрын
@@bryanjessdenio1292 Definitely this! I even have a separate phone with an ok camera just for that purpose.
@thatrealba
13 күн бұрын
We have phones with cameras for that since.. oh.... 2010ish.
I look at it like this. If an engine had something like this happen to it, it is always best to tear it down and know it is good rather than hope its good.
ive been working on Motorcycles and small engines for years. i love how you explain everything and take everything apart in order
I've been watching you fixing bikes for a while now, and I feel I must say you make motorbike mechanics interesting, I can't begin to understand half of what you say after ,but at the time I understand what you mean ....sign of a good teacher 😊thanks for all of your videos ,keep them coming 😊
I only discovered and started binge watching you last week, when I was stuck in bed being ill. This is my first update as a subscriber and I was excited to see it drop. Love your work, cheers from the UK
@skylertooley
13 күн бұрын
I envy you for being able to binge it all, now you gotta wait with us!
Thanks for the tour of the Busa internals. I've done quite a few bike engines, but not one of these.
Ahhhhh yes you call from dad, changes everything 😅 This is not about the bottom end, this is about a son saying seeee I told you so😂
Great video - loved the procrastination counter reappearing 🤣 One of the hazards about being careful about remembering how it came apart, is an assumption that the last guy to work on it knew what he was doing!
@rayhai6781
14 күн бұрын
Got my GSF1200 engine apart completely since a few months now...but I think I get it all together again, it's not that hard to be honest, if you pulled it apart by yourself, my car engine was apart for over two years, put it all together with stronger new parts and didn't need to think a second longer when putting it together...but if someone else tears something apart and you need to put it together, it can get hard, especially if you never ever does something like that^^ tl;dr: Looks difficult, if you never done it before
@gdfggggg
13 күн бұрын
Very true. Worth double checking in the manual.
I just want an episode of bearded mechanic vs armchair mechanics lol Also I have found as soon as I put the offer for someone to come do it themselves they go awfully quite haha
Not a mechanic but love this breakdown/explanation of how the engine works. I am new to the channel and love your excitement every time you get a bike to run like it’s your first. Thanks guys 👍
A master class in motorcycle engine teardown...with absolutely engaging explanation and commentary. Translated, Craig and Dan are awesome (even Greg)! Go Bearded Mechanic, keep moving forward!
I don't even own a motorcycle but I really enjoy watching you work on bikes
@The_Bearded_Mechanic
14 күн бұрын
Thanks!
@eis7713
13 күн бұрын
you will end up owning, atleast one. trust me.
@nshaw-ly4yb
11 күн бұрын
If you ever take the plunge, buy a working bike first, then buy a project bike second lol
@eis7713
10 күн бұрын
@@nshaw-ly4yb thats a solid piece of advice. You always need to have a daily rider. Good thing with bikes is that you can have many. Instead of one car, you can have 3-4 bikes. 👍🏻
The coating is made out of graphite and other dry lubricant materials. It is not for heat transfer. This coating usually helps lubricate the engine during the first start after reassembly.
The piston coating is for lubricantation and break in, if it was a heat coating it would be on the top, not on the skirts.
Thanks Y'all. I spent my working life as a automotive technician but I don't do bikes other than fluids and brakes...very basics!
Hands down the best MC Mechanic out there!! Learn something every time. Have an '02 Busa myself. Everyone needs a Craig!!!
19:00 Still, it IS a good thing you went in, for the "soft" pistons, the galled wrispin, and the wear on the rod. So it WASN'T a waste of time. And I learned a lot. So thanks, Chief 😊
Love how craig explains and show us how to tear apart engines and restoring bikes! Looking forward to all videos coming out
Started watching your channel and im absolutely hooked best KZreadr for me 2024 keep it going man...
This is absolutely my favorite channel that I am subscribed too. Dan cracks me up and your knowledge of motorcycles is very impressive. I also love your personality Craig. GOD BLESS!! Would be cool to meet you someday.
Great run down Craig. I always enjoy learning from your videos. Thanks for making it fun and educational.
I really appreciate the depth and time for the explanations. I am not a mechanic and have limited knowledge on how things work. Thank you for explaining things so well that even the newbies understand 😊
I´m halfway thru the video and i´m as always blown away by the knowledge this man has. Plus the nicest and most chill mechanic i´ve ever seen. Thank you so much for explaning all of this so well.
I have never been interested in motorcycles in my whole life but you guys are amazing!! I subscribe to lots of different channels and you are by far my favorite channel of them all, I drop everything when a new video drops. You guys are funny as hell and it is so entertaining watching you work on engines/bikes... love the channel and keep up the good work Dan & Craig!!
Split a few crank cases in my time but you make it sound so logical and simple to understand - one of your best vids yet. Tried to order a T shirt but postage to us here in the UK is as much as the shirt itself and I honestly cannot afford it, will put it on my Christmas list though !!
I'm impressed with your knowledge and tenacity in rebuilding different brands of motorcycles! That being said, it would be much easier to remove a stud from an engine case using the double nut method instead of a pair of pliers or vice -grips. This also results in no damage to the stud. Finally, getting a Shop Manual for the Motorcycle being worked on can save you a lot of trouble, like the "Hidden Bolt" holding the engine cases together! I know these things after working on Suzuki Motorcycles for more than 50 years!
Thanks for the explanation of how the clutch works... not being a mechanic, I had never noticed how the alternating pads connect to the inner or outer baskets.
That gear indicator is like the Tormat system in an old jukebox. It's how records were selected by the mechanism.
@mortaljorma69
14 күн бұрын
That is usually broken too. Mine was aswell.
I've never understood how a clutch works until I watched this. Great video
Craig, im so glad I found your channel. Your videos are some of my favorite on youtube. I love all the interesting projects, and variety you get in your shop. Really happy to see your continued success on the platform. Keep it up ❤
Editing on this video was super good, can definitely see the progress. keep it up!
The genius is back, while he didn't even leave us. Always good!
It’s always a great day when there’s a new Bearded Mechanic video up. Thanks Craig and Dan for the excellent content and the instructional style, learned a lot!!!
Brilliant video!! I know nothing about engines and that was a fantastic walk through of relationships between the various pieces. Nice work oh bearded one 👌
Best merch plugs ever! Simple, unobtrusive and funny.
Nice editing to get the clutch cover removal via impact wrench to match the music! Next level stuff!
I worked for a Kawasaki shop, for around 20 years. I've rebuilt many engines and transmissions. Craig, does a great job of explaining things.
Man you are the absolute best. Love the videos especially as a young guy working on my own bikes. I go to fix one thing and break 3 more but im learning along the way. In a future video when you use a torch, could you explain when it’s safe/when it’s a bad idea? There’s been a few times where I’d like to heat something up so it eases out but I think im going to light up my whole bike.
I run around 8:1 compression for my Turbo bike.
0:58 seconds in and I'm really hoping that bottom end is FLAWLESS
Excellent video! I’m excited for this as a more in-depth engine study. It completely doesn’t seem necessary from Craig’s perspective but I view it as 100% educational knowledge. Thanks a lot Craig and Dan for this channel.
No metal until looking at the top end pieces , great video can't wait for everything to come back for the rebuild
Funny how everybody became an expert mechanic in the last episode's comment section
Oh man I was waiting for the next installment! 👍🏻👍🏻
1 minute and 4 seconds of bonus Craig thoughts were much appreciated.
Loving every part of your videos, huge learnings. Thanks for sharing all of your knowledge. Big fan here.
Start with lower boost and do plug chops along the way as you increase the boost.
never doubt your Craig.. He always knows best..
Thanks for the explanations you do along the way, I’ve ridden since 1969 and along with my father, friends and bike shop mechanics showing and telling me engine things I have a good idea on how things are put together. Having said that, I’m no mechanic and always approach engine repairs slowly and and carefully. You clearly know your stuff and I appreciate learning more through your videos, thanks again for that. 😎🍺☮️🇨🇦
I kind of agree with Craig that the bottom end probably didn’t need to come apart because of metal. However, I think taking it all the way down is always the right move as you can’t be sure who was into an engine like this before you and what quality of work they performed.
Can't wait for the followup video already ❤
Dan, your editing skills continue to impress! Great to see you play with music and cuts when Craig is removing bolts on the clutch. Keep up the great work gentlemen!
Hi Greg, I have been looking at a lot of your videos. I know you get a lot of comments from all the experts around. I have been working on bikes and cars for 40 yrs, and I am actually a really good mecanic. But you are a real EXPERT!!!
Great stuff as always. You're like the best Shop Teacher ever. Thanks for sharing guys. Take care.
Had a good laugh at the "reticulating splines" reference.
“Should be fine”. “I know when a bottom end needs to come apart.” Are you using the force?
Wow, you do a excellent job explaining how and why it works. .... Thanks
I especially liked the clutch removal part with the zip tie tip. I need to pull the clutch on my high mileage 2008 busa soon, as the gear position sensor sends random numbers to the display occasionally. A part known for failure and fairly easy (but annoying) to replace. I'd recommed replacing it on that as well if it looks even a bit suspect. Thanks for another great video and a shout out from really faraway Finland!
10:20 😅 every time Craig straightens his glasses 🤓 I think of a moose 🫎 😂❤ 🫲 🤓 🫱
@The_Bearded_Mechanic
14 күн бұрын
I lol'd
I can’t help but laugh, I was 11 years old my dad came home and there I was on the floor with my 1968 Honda S65 all apart. Had literally had for only a couple days, he looked at me and said “ you already broke it ?” No pops I wanted to know how it worked. “ ok then tear it all the way down son “ replace everything……(gaskets, o rings etc ) ha ha 56 years later still tearing up ha ha
@weiswurst666
9 күн бұрын
But did you get it back together?
@turner0224
8 күн бұрын
@@weiswurst666 Oh absolutely, being Mr. Anal I had everything put in it’s place . Found out earlier rebuilding Briggs & Stratton that there should be no left over parts when done ha ha ha
@davidwilliams4845
8 күн бұрын
Reminds me of my first car at age 16. I had inherited the family '69 Chevy Nova with a straight six. The oil was a gray sludge, which I was told meant that the head gasket was blown. My Dad could never find the time to help me, so I tore into it on my own. I had ZERO clue how to do it, but I was determined. I did the whole job, but not knowing any better, I didn't clean the sealing surfaces properly or check that they were not warped. Worse, I had no idea about how to properly torque the head bolts, so I ended up more or less right where I started. If I'd've had KZread back then, I think I could have taught myself how to do it.
Was great seeing someone explain all this so clearly. Thanks Craig!
Subbed! So much knowledge, just enough sarcasm and a lotta fun to watch. I wrench myself and have a cylinder revision on my hands. Your vids help me translate theory to practice. Very cool!
If for no other reason than to check the rods, yeah, you gotta take the bottom end apart. Sorry Craig.
I nearly crapped myself first time I rode a busa, another cool vid Craig.
Metal shavings aside. Thank you for showing us all and explaining it. I'm sure I speak for many when I say it's very appreciated. 🤘🏻
I have been working and riding motorcycles since 1990. I recently retired from federal law enforcement, specifically to pursure my new dream. I started last week as a motorcycle apprentice mechanic. I love these videos. The shop i work at is very similar to the atmosphere in Craig's shop. I am so excited to go to work now. Its like Christmas when a bike xomes in for service. Opening presents everyday. I love it.
I very much appreciate you pointing out the high quality parts we installed!
@razor1uk610
13 күн бұрын
true, shame some of the reassembly done by yourself or your previous mechanic were found to be loose, real good work there (sarcasm mode active).
Excellent information, but I agreed with Craig in the first video. I'm a retired motorcycle mechanic, I would not have pulled it apart. I definitely would have recommended a new cam chain, just as Craig said.
@wadewilson6628
10 күн бұрын
Then you're dumb. Is he working flat rate? Why not pull it apart. Now you know. And he did find damage.
You are an incredibly talented mechanic and I learn so much from you. I wouldn't hesitate one second to have you wrench on my bike.
That was really cool to see how the clutch and the gears work. Love this channel! Great work!
This is the best content by far out there that i've stumbled on. Cheers!
Thanks for the follow up on this one.
Craig & Dan, you are legends and made my day again. Thank you😁
I'm from the UK and I love this channel. Not only do I learn something new in most cases, but I also get to see snippets of real American life. In a rapidly changing world it's nice to know there are still genuine mechanics out there working on genuine old bikes made from metal and runner and leather. Nothing remains the same anymore, even transgender people ain't what they used to be.......
Love your channel! Awesome fun and informative! Hy from a German CBX 750 FII rider!
Learn so much from your vids! Still amazed at memory of where, what fits! And great tips re keeping parts together with zip ties.
I am amazed at how complicated that whole process of tearing it down is. I am sticking to my single cylinder Briggs & Stratton engine on my lawn mower.
@mattivirta
8 күн бұрын
very simple, busa have high tech but normal MC engines have super simple repair and tear and make, not need engineer or doctor be, haha. i tear and repair my first MC engine totally off all and change some parts and make all back has 12 year old and first kick run fine. simple repair MC or olden car engine. new car need many know how torque and timing system more know, end lot elektric need know today. i love repair all old MC engines simple easy job.
Freaking great walk-through. Appreciate you providing the details
Craig you explained it so well thank you
It didn't "need" to come apart, but in the long run, you'll be happier to have done it. Thanks for putting a link in the description down below!
Amazing video. Thanks for the explanations while tearing it down!
Love your breakdown video so much info craig for the people that arnt mechanically minded keep the videos coming mate great work 👍
Love the breakdown. Own a motorcycle and just learning engines so watching the engine getting broken down is great. Also cool learning Craig is a 40k fan.