hdtvparts.net/ How to Fix a Weller Wes51 Soldering Iron That Does Not Heat Up By Troubleshooting and Removing the Aluminum Capacitor 2.2Mf/50V
Жүктеу.....
Пікірлер: 24
@jeyakrishnansethu18484 ай бұрын
Well done man brilliant and can you bring up more video thanks
@Mr1Corona2 жыл бұрын
Had the same issue with this make/ model. Replaced capacitor and it works again. Thank you very much!
@israelgo5588 Жыл бұрын
BIG thanks to you Sir, after watching your video the same procedure as you do finally fixed mine. I'm also glad to keep this unit, i had this unit almost 10 years ago. Keep it up. Thanks a lot.
@arturomendez79455 ай бұрын
Same problem. I have replaced same capacitor now iron works well. Even old capacitor measured 2.2uF anyway I replaced it. Maybe it is from Plage capacitor time as my soldering station is from 2007. Thanks a lot.
@iqtpilot2 жыл бұрын
Thanks for this video. I, too, replaced the cap and works great again. Glad I can keep this unit that I have had almost 20 years going!!
@algluba3772 жыл бұрын
First time I see something like this.I mean the music matchin the contents. As a musitian and a station owner a really apreciate
@dougtrader88947 ай бұрын
THANK YOU! I really appreciate you taking the time to make this video. Can you tell us what options we have fo for replacing the 35v capacitor Merry Christmas!
@junkyard_engineering2 жыл бұрын
Hi. My Weller wesd51 has the same problem. This video helps me a lot. Thank you so much.
@ananthanarayana576810 ай бұрын
Hi, my also same problem, but not at all much used, i need to check, i was thinking iron problem, but after seeing u video capacitor problem was, so i will check and message you, by the mean time can you send the resistance of the heater element and ßensor resistance inside the iron
@ananthanarayana576810 ай бұрын
Saw many of the sew51 same problem, any how all could fix the problem with a 1 capacitor
@m112mx33 жыл бұрын
i don't got it, the value of old capacitor was same as replacement cap, to reading on Multimeter screen between 4-5 voltages , and you don't used ESR meter, so how do you know about that cap was bad?
@accbcc1318
2 жыл бұрын
ya but it works so eat one debbie downer
@accbcc1318
2 жыл бұрын
just fixed mine because this guy took the time to make a video and help people
@SureshKumar-nk2ok2 жыл бұрын
good video thank you.earlier the voltage reading 4.83v but now also,after changing capacitor same reading arounf 5 volts .how problem solved by changing capacitor
@Kleponturbo3 жыл бұрын
Hi, i got same case like you with my wesd51, if ok i want to ask about capacitor 2,2 Mf that you mention stand for mili farad, micro farad or mega farad, because at video says Mf (with capital M), thanks
@DAICOVIET
3 жыл бұрын
It is 2.2Mf/50V (microfarad (Mf)or(Uf)). Thanks
@Kleponturbo
3 жыл бұрын
Thanks for your respon, my wesd51 works again, for temporary fix i use 2,2 uf 100v and i will order replacement part tomorow, thanks for sharing 😀
@archguitars Жыл бұрын
I have wecp20 and it wont hot, do u have any clue what was wrong with my soldering?
@apollodantes Жыл бұрын
QUE POTENCIOMETRO TIENE? DE CUANTOS HOMS ? TENGO UNA ESTACION WELLER WES51 PERO NO TIENE EL POTENCIOMETRO
@luisucd55782 жыл бұрын
Lo que hace no soluciona el problema, sigue igual no regula y esta siempre al máximo de temperatura, la solución es algo sencilla siempre y cuando se trate del mismo caso que el mío
@luisucd5578
2 жыл бұрын
En mi caso yo tenia un cautin weller wes51 y estaba trabajando bien cuando de pronto veo que el led esta rojo, y me dedique a buscar una solución y no la encontré en ese momento, entonces compre otro de medio uso, y trabajo exelente con mi lápiz anterior (osea el lápiz no es el problema tampoco) trabajo como 6-7 meses y le pasó lo mismo quedo el led rojo
@luisucd5578
2 жыл бұрын
Si algien quiere saber como lo solucione respondan a este comentario, gracias linda noche desde México
@alex__g
2 жыл бұрын
@@luisucd5578 Como fue que lo resolviste, yo tengo el mismo problema.
@salvadormartha2264
Жыл бұрын
@@luisucd5578 buenas ... Me podrias pasar info de como lo arreglaste tengo el mismo problema
Пікірлер: 24
Well done man brilliant and can you bring up more video thanks
Had the same issue with this make/ model. Replaced capacitor and it works again. Thank you very much!
BIG thanks to you Sir, after watching your video the same procedure as you do finally fixed mine. I'm also glad to keep this unit, i had this unit almost 10 years ago. Keep it up. Thanks a lot.
Same problem. I have replaced same capacitor now iron works well. Even old capacitor measured 2.2uF anyway I replaced it. Maybe it is from Plage capacitor time as my soldering station is from 2007. Thanks a lot.
Thanks for this video. I, too, replaced the cap and works great again. Glad I can keep this unit that I have had almost 20 years going!!
First time I see something like this.I mean the music matchin the contents. As a musitian and a station owner a really apreciate
THANK YOU! I really appreciate you taking the time to make this video. Can you tell us what options we have fo for replacing the 35v capacitor Merry Christmas!
Hi. My Weller wesd51 has the same problem. This video helps me a lot. Thank you so much.
Hi, my also same problem, but not at all much used, i need to check, i was thinking iron problem, but after seeing u video capacitor problem was, so i will check and message you, by the mean time can you send the resistance of the heater element and ßensor resistance inside the iron
Saw many of the sew51 same problem, any how all could fix the problem with a 1 capacitor
i don't got it, the value of old capacitor was same as replacement cap, to reading on Multimeter screen between 4-5 voltages , and you don't used ESR meter, so how do you know about that cap was bad?
@accbcc1318
2 жыл бұрын
ya but it works so eat one debbie downer
@accbcc1318
2 жыл бұрын
just fixed mine because this guy took the time to make a video and help people
good video thank you.earlier the voltage reading 4.83v but now also,after changing capacitor same reading arounf 5 volts .how problem solved by changing capacitor
Hi, i got same case like you with my wesd51, if ok i want to ask about capacitor 2,2 Mf that you mention stand for mili farad, micro farad or mega farad, because at video says Mf (with capital M), thanks
@DAICOVIET
3 жыл бұрын
It is 2.2Mf/50V (microfarad (Mf)or(Uf)). Thanks
@Kleponturbo
3 жыл бұрын
Thanks for your respon, my wesd51 works again, for temporary fix i use 2,2 uf 100v and i will order replacement part tomorow, thanks for sharing 😀
I have wecp20 and it wont hot, do u have any clue what was wrong with my soldering?
QUE POTENCIOMETRO TIENE? DE CUANTOS HOMS ? TENGO UNA ESTACION WELLER WES51 PERO NO TIENE EL POTENCIOMETRO
Lo que hace no soluciona el problema, sigue igual no regula y esta siempre al máximo de temperatura, la solución es algo sencilla siempre y cuando se trate del mismo caso que el mío
@luisucd5578
2 жыл бұрын
En mi caso yo tenia un cautin weller wes51 y estaba trabajando bien cuando de pronto veo que el led esta rojo, y me dedique a buscar una solución y no la encontré en ese momento, entonces compre otro de medio uso, y trabajo exelente con mi lápiz anterior (osea el lápiz no es el problema tampoco) trabajo como 6-7 meses y le pasó lo mismo quedo el led rojo
@luisucd5578
2 жыл бұрын
Si algien quiere saber como lo solucione respondan a este comentario, gracias linda noche desde México
@alex__g
2 жыл бұрын
@@luisucd5578 Como fue que lo resolviste, yo tengo el mismo problema.
@salvadormartha2264
Жыл бұрын
@@luisucd5578 buenas ... Me podrias pasar info de como lo arreglaste tengo el mismo problema