Weld on beadlocks from total metal innovations
Тәжірибелік нұсқаулар және стиль
how to install a set of weld on bead locks from total metal innovations. start to finish process of preparing the material and assembly
#weldon #beadlocks #tmi
www.totalmetalinnovations.com...
Пікірлер: 22
This is great! Had this idea the other day but not sure how it worked, glad I found this.
@ht_fab3525
2 жыл бұрын
Thanks for watching! Good luck with your project.
Those are reversed wheels so whats normally the out side bead is now inside. Its what normally is the out side bead that always fall off so you put the locking ring on the wrong side of the wheel
@ht_fab3525
Жыл бұрын
Looks like its on the outside to me
@JoshTorkleWeber
Жыл бұрын
@HT_FAB but you have reversed wheels so you should have put the locking ring on the inside. Look at the valley, how its so much closer to the inside bead. Thats where the tire is going to come off.
@RangerOffroadWV
Жыл бұрын
@@ht_fab3525 he's right you know
Looking good bro.
@ht_fab3525
2 жыл бұрын
Thanks! I think they are worth the money.
you said petina, i thought ugggg... You were right they look bitchin cleared out like that!! thanks for sharing.
@ht_fab3525
Жыл бұрын
I’ve done it to a few projects clearing steel like that. Seems to be ok. Thanks for watching!
Did you start with a 10” wide rim? How much did it add to how wide your rim is? Was told about 1.5”?
@ht_fab3525
Жыл бұрын
I can’t remember exactly the width of my wheels but it definitely didn’t add 1.5”. was worth the investment IMO
How long were your bolts? I got 1.5” but I’m thinking I need 1.75”
@ht_fab3525
2 жыл бұрын
I believe they are 1.5 i’ll have to check
@ht_fab3525
2 жыл бұрын
1.5
@paintham9430
2 жыл бұрын
@@ht_fab3525 thanks brother!
What is the diameter of the bolts? What is the thickness of the plates? I'm looking to lasercut custom beadlocks
@ht_fab3525
Жыл бұрын
3/16” inner plate 1/4” outer. 3/8 hardware
Is there ant reason you don't tack the nuts on the inside of the rings?
@ht_fab3525
Жыл бұрын
Just not designed to be done that way I guess. You would most likely damage the nyloc nuts anyways if you welded them.
Any reason a fella couldn't put these weld on beadlocks on front and back of wheel? To have a both sided beadlock wheel like a baddass?
@ht_fab3525
Жыл бұрын
Not sure if this style rock ring would clear the brakes? But im sure something could be made for that application.