This is what I consider a Family success story...God loves You ALL.

Hunter can look you in the eye,but I bet he still respects you and is proud of your accomplishments.

You guys have a blast working together and it’s great to see the in’s and out of these machines.

Clint I noticed in all your videos you are a hands on boss, pretty impressive to see that these days.

@C_CEQUIPMENT

Жыл бұрын

Yep Always

Did anyone else look away when the welder hit. Old habits…

The 455's are the gifts that keep on taking.Kevin got plenty of experience on the first one ,so this one should be easy for him to make new again.Great video as usual Clint .Stay safe.

My I didn't realise Hunter was so young I knew he is still at school but I assumed it was sixth form or whatever you call the pre university years in USA. I think it is great that he is so involved and rebuilding his own Bronco, it looks a beast. He obviously has a wonderful opportunity of working in C&C if he wants to when he finishes full time education. Good luck to him. he is very lucky having you for a father and that you teach him so much.

Looking forward to see the under carriage rebuild!

@C_CEQUIPMENT

Жыл бұрын

Coming soon

That is one tough little machine, you can hear it while you were driving it, I think I can, I know I can, Thanks Clint and the team for another educational video.

on fuel tanks, my friend said he was on the course, and it was mentioned that the inventor of Barbie dolls also invented a lining for fuel cells that would let water collect into it and then run to a low spot. I'm not sure if the invention ever went anywhere, but it would be some handy.

Awesome job guys my goodness brought that thing back to life.

That looks like it's going to make somebody a nice little loader. Great video

Looked like it was gonna be spare parts at one stage there, great to see it up and running! Great work! 🇦🇺🍺🍺

Probably burnt out the starter or damaged the cables trying to get it to run with that blocked fuel line. Nice work getting it running!

@C_CEQUIPMENT

Жыл бұрын

Thanks

I'm starting to believe that when you go out to look at equipment there's a voice that tells you "yeah, that'll make a good video." As always, I really enjoy your content.

@C_CEQUIPMENT

Жыл бұрын

😁

Easy Peasy to get it started when you know what you’re doing!

The old girl sounds good. I been down that road of flushing transmissions out with diesel already.Had zero problems after doing it.The problem is a little water seems like a lot once it gets whipped up in the oil.Another great video can’t wait to see part 3.

Thanks for taking us along for these reveals. Hope you can at least break even on the "ran when parked"beauty Clinton. If not you can always claim 10 or 20 percent of Picasso's fountain patent.😁👍

Kevin is a man who enjoys his work. You guys are a hoot. I'd like to buy a couple of cases of beer & take y'all fishing. And I don't even fish. 😆

When this tractor leaves C&C, somebody's gonna have themselves a good machine.

Nice work guys. Always enjoy watching you guys dig in and find the problems with the equipment. Love watching you and Kevin and your boys working and having fun at the same time. Great video, Clinton, thanks for sharing!!

@C_CEQUIPMENT

Жыл бұрын

Thanks for watching

@dennisholst4322

Жыл бұрын

Is Burco still making tracs

I remember standing behind the seat as a kid while my dad ran one of those !

Cool video Love the Bronco That's Great he is rebuilding it He will appreciate it more and take care of it if he knows every bolt Well done Clint on both projects

@C_CEQUIPMENT

Жыл бұрын

Thanks

Dang, you guys are good, bringing equipment back from the dead/scrap pile. Great video

A helping hand is always welcome.

Really enjoy your content, between you boys and the dirt perfect bunch, it appears Indiana is filled up with some fine folks.

@C_CEQUIPMENT

Жыл бұрын

We like to think so

These are fantastic videos. I’ve always had interest in heavy machinery but do not had the slightest clue as to working on them or doing general maintenance. Keep up the good work!

@C_CEQUIPMENT

Жыл бұрын

Thanks

Nice project! I will be waiting for the next video! Thanks!

Awesome video keep them coming love see old stuff brought back to life good job cant wait to see Kevin do his magic on a new paint job .

You guys are always fun & fascinating to watch you work through the diagnosis and rebuild process.

@C_CEQUIPMENT

Жыл бұрын

Thanks

Great video y’all having fun while working Kevin and you are a blast

Well, you guys do not disappoint great video fun, and entertaining.

Love the relationship with you and Kevin. Funny!

Here is a trick I have used in the past to remove broken bolts. Before you weld on the nut, drill a 1/4 inch hole in the end of the broken bolt about 1/4 inch deep. Take an air hammer/air chisel with a round tapered punch on the end. Place the tip of the punch into the hole you drilled and hammer the piss out of it for at least 30 seconds. A lot of times that hammering action will break loose a lot of the rust in the threads. Weld on your nut and you will have a lot better rate of sucess.

@C_CEQUIPMENT

Жыл бұрын

Great idea

@codywaltz9329

Жыл бұрын

Seriously great idea! I’m stealing this myself.

Great video. I thought for sure you were going to throw a track. Great to see the boys hanging with you guys. Thanks for sharing. I look forward to part 2.

Great job guys, nice Bronco walk around.

That Bronco is awesome. Very cool.

53:23… the birth of any new ‘boy’ is a joy… but that was FRIGGIN brilliant

Enjoying seeing this stuff ,,changing the blood is always essential and easy .

Absolutely love the video, projects are interesting to me. Looking forward to the rebuild rescue part 2. Kevin is so funny “ Gold Star hero”

You two crack me up...Kevin's my Hero!!

I knew you and Kevin could handle whatever came up. Can’t wait to see the next one.

‘When in doubt resort to violence’ - I like it - along with ‘if all else fails - read the instructions’ and “ if it won’t go don’t force it - hit it with a bigger hammer’ god I loved working on aircraft. Have a great day

Awesome job guys

Another awesome video well done you keep on coming and I'll keep a watching

Love sound of the motor it runs .but alot of repaires .

I knew we’d get a series out of this one!!

@C_CEQUIPMENT

Жыл бұрын

We try

Clint love your videos, try welding a heavy washer on a broken bolt first then a nut. When heating up a nut to remove a bolt, just heat up two sides opposite each other, much less likely to strip the threads, I found this the hard way. Keep up the great work.

Looking forward to the next video. It's gonna be a HOOT.

Great Video! Thanks for sharing it with us.

Loved watching that track flop around. She's a real beaut.

These videos remind me of buying used equipment and going through the trials and tribulations of working the gremlins out. Keep em coming.

Great video Clinton love to see all that knowledge on those John Deere’s and get looking Bronco too

I like seeing this stuff. Interesting to see how things work. Great video and great people in the video. Thanks guys.

@C_CEQUIPMENT

Жыл бұрын

Thanks

tracks are doin the wave YIKES

Clint you guys are the best !! Always remarkable results! Thank you so much for your videos !

@C_CEQUIPMENT

Жыл бұрын

Thanks

I really enjoyed this video. The 455g looked pretty rough. I think you guys will definitely turn it into a work of art. 👍

Great video. Really enjoying watching you bring junk back to life.

@C_CEQUIPMENT

Жыл бұрын

Thanks

I really enjoy your videos keep them coming

Another Awesome one. Thanks Guys.

Thanks for sharing your time with us. Your sure know that equipment.

@C_CEQUIPMENT

Жыл бұрын

Thanks for watching

You and Kevin do a great job together. Enjoy your banter and knowledge. Hope the dozer rebuilt pays off.

@C_CEQUIPMENT

Жыл бұрын

Let’s hope

Kevin's T shirt 👕 is hilarious 😂. Freezer bags.....😂😂😂👍👌

Kevin, I heard the ambulance and said the exact same thing… here in the south we call it the MEAT WAGON as well!!!

That thing can giddy up! They tracks are hilarious though. Lol

the gloop was rolling out👍👍👍👍👍👍👍👍

Another great video Keep them coming !!!

Omg! Those are some dandy tracks! But strong running machine clint!

Really excited to see the under carriage rebuild that's awesome I've never seen track press work done before but have always been interested in seeing how all that works. Great video keep'em coming!!!!

@dennisholst4322

Жыл бұрын

Are you in Wisconsin

Sweet Bronco Hunter. God bless

Good job guys getting the 455 to run the tracks looked like a wave at the ocean when you took off forward. I’m not a ford guy but that bronco is a sweet truck especially with the one ton axles and the Diesel engine, Hunters got a chick magnet when he turns 16. Great job!

Well, other than getting a little sea-sick watching that left track when you're going forward, that was a good video.

You know your stuff, nice shop and rig.

Hunter's got a nice bronco. To many milkshakes in that dozer 🤣, nice work 👍.

Thanks for an exallant show. I love watching you guys rebuild a non running price of equipment to an excellent price of equipment. Great entertainment. Thanks guys.

@C_CEQUIPMENT

Жыл бұрын

Thanks for watching!

Nice bronco in the background at the beginning and very cool 4x4 f-superduty for sale. Popped up on marketplace close to me. Keep the great videos coming!

I love Kevin's Hillbilly waterfall. Lol God bless

I changed a lot of O-rings to Quad-rings, especially on flange fittings and flat face fittings. They provide a much better seal, especially on large hydraulic flanges on 4 and 6 inch pipe.

Fantastic video!

Great job guys. The old John Deere runs great

Great video Clint just a big can of problems on this one

It's nothing like a old time flushing, moore & moore old school job, but still very good to see! Instead to change it, flush ìt, special if you have automatic gearbox privat car, every 12 000 Km! From Peter Eriksson Sweden Europe 😊😊😊!

That's a good lookin tractor Clinton. I'd love to add it to my fleet ; don't need it, but I want it.

Lovin the videos Clint 🤘🤘🤘🤘

good job getting it going

@C_CEQUIPMENT

Жыл бұрын

Thanks

Great video Clint 🇺🇲

@C_CEQUIPMENT

Жыл бұрын

Thanks

Kevin and Clinton you guys are always having a beast. Kevin you need to go forward with your yard art . Hunter what's up with bronco. Plan B. Flame wrench loosen everything.

yes good deal , lucky in candler nc

The old machine did seem fairly strong. With it's arteries cleaned out. I'm sure it'll be like new before long.

Putting that kind of work and money in it is that a good thing

I just got on the Tube, good to see you Fella’s

@C_CEQUIPMENT

Жыл бұрын

Thanks

another great track loader video. good job fella.

@C_CEQUIPMENT

Жыл бұрын

Thanks

It helps to weld a washer on first.

Another great video guys

I am glad I found your channel. I am enjoying your older videos now.

@C_CEQUIPMENT

Жыл бұрын

Glad you like them!

Clint…if you REALLY are giving the old diesel fuel away, ship it to Chris (COD of course). it may not be good for engine use, but it’ll certainly help him on his burn piles!

Beats a full blown rebuild!

What a hot mess that was ! you guys are awesome !

Nice video. At least this one shouldn’t cost as much as the last one. Maybe the original starter is still good.

37.30 thats water in the fluid! From Peter Eriksson Sweden Europe! 😊😊😊