10:38 Daddy always said "grind em till ya find em"

@C_CEQUIPMENT

2 жыл бұрын

Trans has left the chat bub

@corywillbanks6348

2 жыл бұрын

Mine always said “maybe next year they’ll invent rubber gears”

@ko9446

2 жыл бұрын

Sometime the manufacturer machines the gear too big, the operator needs to fine tune it. Don’t ask me how I know

@C_CEQUIPMENT

2 жыл бұрын

@@ko9446 lol

The adventures of Kevin and Clint. Tucker and Hunter seem to be enjoying their time in the shop this summer.....well, maybe most of it. Lol

@mrsclinton

2 жыл бұрын

I think they might have been ready to take a break and get back to school 😂😂😂 but they sure worked hard this summer ! Thanks for watching!

@jz1340

2 жыл бұрын

@@mrsclinton Yeah right....we all looked forward to going back to school. 😁😁😁

Clint, you drove right by my house and I bet you didn't even wave. Now my feelings are hurt.

@C_CEQUIPMENT

2 жыл бұрын

Oh snap

That’s a new way of grading the drive in the opening shot 👍😀

@C_CEQUIPMENT

2 жыл бұрын

For sure

Wow,....that young boy sound smarter and talks better that Kevin! Yep, yep! Lol

@C_CEQUIPMENT

2 жыл бұрын

Lol

Clint and Kevin find them and fixem segment brought to by C&C equipment and today's sponsors are John Deer, Peterbuilt and Round Gears ⚙️ like we say if you can't find them make knew one's 🤪🤪🤪🤪

@C_CEQUIPMENT

Жыл бұрын

That’s right 😁

That Pete of yours is one sweet sounding gal.

@C_CEQUIPMENT

2 жыл бұрын

Thanks

That's a cool little dozer you found yourself there Clint

Sweet, another Clint and Kevin rebuild rescue. Can’t wait to watch the awesome adventure

In the words of Flounder: "Oh boy is this great!" :))

Gonna make a nice track loader. And the great thing about it is no def ,sensors or modules to worry about

@C_CEQUIPMENT

2 жыл бұрын

Yep for sure

Can't wait to see this baby roll out looking and running like a new one. Awesome job Clinton/Kevin!!!!!

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Job well done Clinton

Excellent demonstration of your trailer's abilities to rescue dead equipment! Thanks for sharing!

@C_CEQUIPMENT

2 жыл бұрын

Yep Thanks for watching

You make the very difficult look...easy! Your videos are always educational. Thank you.

Clint, You kept mentioning Snatch Block when you were loading and unloading that crawler. I always thought Snatch Block was a birth control device!

@C_CEQUIPMENT

2 жыл бұрын

Lol

Clinton and Kevin great job great videos keep saving that old iron, outstanding driving that trailer you put it were you want

I miss that cat sound and fuller 18 speed like i had in my dump truck.🇫🇮 Now i am retired and have time to watch your awesome videos🙂

@C_CEQUIPMENT

2 жыл бұрын

It’s the best

Thanks guys fun video

Love the southern part of our state, Brown Co. Patoka always vacationed there.

Kevin's new chirstmas ornament. Good job 👏

I love the sound she makes when you decel… for once Mr Sausage fingers cannot be blamed for the low grumbling sound… even though he was plagued by the wind in the copilot’s seat.

Well Kevin looked on out of the window and he started counting phone poles Goin’ by at the rate of 4 to the 7th power. Well he put 2 and 2 together And added 12 and carried 5, He came up with 22,000 telephone poles an hour.

Need a remote that works on Kevin, need a get back to work button, enough of your lip button, not listening to you button. Then there are days where it's "ok I really have had enough of you, I am off to an auction." Lol 😆

@C_CEQUIPMENT

2 жыл бұрын

Yep lol

hell ya another resurrtion of a good ol track loader. Thanks Clinton for saving the loaders.

@C_CEQUIPMENT

2 жыл бұрын

We are trying

What makes your channel so interesting to those of us in the U.K. is your road trips. Your filming of the entire journey to collect these machines is a great part of your videos and compliments the filming of the machine repairs and rebuilds . I have visited your country twice now but for those here who have not , (here in little old Englandland ), they are often astounded at the similarity at your country side to our own. This video could in fact have been shot in the Shakespeares own countryside of Stratford upon Avon. Beautiful countryside and quaint villages but you have actually less road pot holes than we do!!! Do keep your road trips part of your videos. Last but not least those loading ramps were probably sharp enough to peel spuds on after you had dragged them half a mile in the gravel trying to find a level spot to load easily!!!😆 Great video chaps. Looking forwards to the next.

@C_CEQUIPMENT

2 жыл бұрын

Lol That’s cool

You should see the limestone caves in Kansas City Missouri. You can drive all day in one storage cave. You can’t believe what is stored in these caves. The Government and Military have supplies everywhere. I have one that they have been taking limestone out of for years by the Missouri River. I can cut across country and make it to that cave in 13 min. If we ever go nuclear fireworks that’s where I am heading. -40* below 0 and it’s 56* all the time.

They keep following you home. Literally.

@C_CEQUIPMENT

2 жыл бұрын

They sure do

Another fine job and video....Thanks

Love the Pet great Jake on it

You did it because you know what to do to show her some much needed love and you will turn her into a good working machine again.

When you and Kevin get together it's entertaining keep it up

Another cool 😎 video and now I know where the capital of the best lime stone is Indiana state 👍😎🇺🇸NY

That kitty cat sounds fantastic

@C_CEQUIPMENT

Жыл бұрын

Thanks

I can't really speak to Clint's driving abilities, except for his shifting gears, I watched him like a hawk in a couple driving video's, and he does it as good as anyone I've ever seen, I didn't see him rack one gear,👍, he's a pro for sure, btw, every able-body male in my family is/was a truck-driver, great video guys, and thanks for sharing.

Standing by for this restoration.. hopeful restoration.

@C_CEQUIPMENT

2 жыл бұрын

Fingers crossed

Enjoy your channel

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Nice recovery Clint. I bet you make a lot of folks happy with affordable "slightly" used refurb's. Looking forward to the refurb.

It's either another interesting project or another John, Oh deer!

Super nice truck and trailer. Good video.

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Made for great viewing as always guys and yes am looking forward to progress videos on this bro. Safe travels

Good video Clinton enjoy the rescues !

Thanks for sharing

Nice project. Looking forward to the videos

“What did I get myself into again?” From my perspective, I say “exactly what you wanted to.” I would do the same, slow season coming on, and as fast as that last one sold I would’ve been on that like gravy on potatoes🙄😏😉😆 not to mention it makes great video fodder to. I will be watching this series for sure. Thanks for the ride along sir.

@C_CEQUIPMENT

2 жыл бұрын

Thanks Plenty to come

You might want to add a second air switch for your differential locks. We always split them up for Alaska. In the winter you can lock you interlock in and lock the rear drive axle. That got us up grades without spinning out and you still could get around a corner. With the rear axle locked you could grab the rock on the shoulder or in the center of the road to keep going. We rarely put chains on for the grades and the Cassiar had a couple 12% stretches. The Burrage was always fun. You had a 12% going down and across a steel deck bridge and up a 12%. You tried to center yourself up and hit the bridge at about 60mph and it got you up when it was solid ice and snow.

@C_CEQUIPMENT

2 жыл бұрын

Not a bad idea

Great video. Really love that trailer. Someone with knowledge of hauling equipment designed that bad boy. We will be waiting for the repair videos. Thanks for sharing, Clinton.

@C_CEQUIPMENT

2 жыл бұрын

Thanks Stay tuned

Cool, like these track loaders.

an other great project to watch you work on 👍👍👌

here we go again

That was a tough pull with one track locking up. Great video of the retrieval. Can't wait for round 2.😁

@C_CEQUIPMENT

2 жыл бұрын

Plenty more to come

have a great week. Another great video guys!

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Enjoy the ride Clint and hope to see it if it runs .

@C_CEQUIPMENT

2 жыл бұрын

Stay tuned

🤞🏻it runs!

Great video. I look forward to seeing the surgery that you'll have to perform to bring this one back to life. Thanks for sharing.😀

@C_CEQUIPMENT

2 жыл бұрын

Thanks for watching

Another great video that you guys make so easy. We be waiting for upcoming episodes

@C_CEQUIPMENT

2 жыл бұрын

Plenty come!!

Look forward to following the rebuild thanks for sharing 🦘👍

@C_CEQUIPMENT

2 жыл бұрын

Thanks for watching

Great video hope you have good luck getting it going for resale 👍🏻🇺🇸

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Great video I love how you steer with the snatch block GREAT IDEA 💡 ALWAYS A JOY TO WATCH

@C_CEQUIPMENT

2 жыл бұрын

Yep thanks

Thanks Clint for the share 👏👏👏👏👍🇬🇧

@C_CEQUIPMENT

2 жыл бұрын

Thanks for watching

Great video. The quarry would be a interesting video too.

Let the battles begin.

Nice tag trailer. I like the ramp set up

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Looking forward to the build 🦌👋🇨🇦

@C_CEQUIPMENT

2 жыл бұрын

Stay tuned

Hey Clint great job on getting that loaded that looks like a project 🙂👍👌😎✌️🇺🇲

@C_CEQUIPMENT

2 жыл бұрын

For sure

Projects like that l think are the best ones you guys do but shoot everything else is great as well.

Can't wait to see you tackle the 455G!

@C_CEQUIPMENT

2 жыл бұрын

Stay tuned

The fun fact was pretty cool to learn i didnt know about being lime stone capital. I do know that their is a quarry in Lapel that supplied for Interstate 69 being built from Castleton to Fort Wayne but its not a active quarry now

Video take away. -Got to love it, three minutes into the video and the sign says DEAD END. -That's what happens when you don't bay your bill. -It will run. Great video.

@C_CEQUIPMENT

2 жыл бұрын

Lol Thanks

Clint so much for the shop floor pushing the Deere sideways🤦

@C_CEQUIPMENT

Жыл бұрын

Doesn’t hurt it with the track pads it has

cute luk whit it dhe dozer

Can't wait to see part 2 of this video

@C_CEQUIPMENT

2 жыл бұрын

Plenty more to come

455G is my favorite track loader , im excited about the series

@C_CEQUIPMENT

2 жыл бұрын

Plenty to come

You had to go out into the Boonies to find this one, it won't look like this when you guys get done with it. Love the video and look forward to the follow up on this one.

@C_CEQUIPMENT

2 жыл бұрын

Plenty more to come

Another C & C project. All practiced up on the first one so this one should go twice as quick (HaHa). good luck guys .As always great video.Stay safe.

She was a fighter but no match for the c&c crew! It amazes me when it’s a decent machine and someone can’t figure it out then the start the parts pilferage on it. Looks like some more great track loader videos are in my future thanks guys!

@C_CEQUIPMENT

2 жыл бұрын

For sure Stay tuned

Nice recovery

@C_CEQUIPMENT

2 жыл бұрын

Thanks

Great video like always

Hi from uk guys 👋 👍 how many torques got you up the gravel (""all them"")🤣and the driver of that little dump truck needs to learn how to either clutch or float lol the only thing floating was the input shaft of the synchro gear wall 🤣🤣 but can't wait to see journey on this one 👌 and loading it was like no not another home am not tracking straight and back at shop it like yeyyyy am at C&C shop al roll in there no problem 🤣🤣 thanks for your time be safe and see you soon 👍 👋

Clinton Kevin and boys great video! Thanks for sharing! Kevin

@C_CEQUIPMENT

2 жыл бұрын

Thanks

I cant wait to see that poor abused dozer run again, thanks Clint and team, another good video under your belts well done guys, you do need a young enthusiastic female engineer though maybe two.

@C_CEQUIPMENT

2 жыл бұрын

😁

Fix it, make it run, make it shine!!!!

@C_CEQUIPMENT

2 жыл бұрын

We will try

@gayle4804

2 жыл бұрын

Hope so I hope it works it looks beautiful

You backed that trailer up the hill to that G like you were the repo man👍🏻😆

@C_CEQUIPMENT

Жыл бұрын

Lol

Greetings from Central NH Lakes Region - I am looking forward to this project. The last 455 was such a honey when it was completed. I love those machines and if it were not two weight classes above what I can use, I would be on the phone negotiating an option to buy agreement with Clint today!

@C_CEQUIPMENT

2 жыл бұрын

Thanks

@scotabot7826

2 жыл бұрын

You're not the only one. When I get my farm in the near future, Clinton will be the first dealer I call.

Loved the vedio 👍❤️

that truck sounds bad ass

@C_CEQUIPMENT

2 жыл бұрын

Thanks

All I can think of is having track frames upside down on horses digging broken bottom roll bolts out. Don't miss it even a little bit.

@C_CEQUIPMENT

2 жыл бұрын

You nailed it

Recovery & driveway grading!

When you said snatch block, that's not exactly what came to mind.

@C_CEQUIPMENT

2 жыл бұрын

Lol

Ah yes, looking forward to seeing you work on it... Or part it out. Lol

@C_CEQUIPMENT

2 жыл бұрын

Who knows

Oh my this is going to be great Clinton can’t wait to see the new video lol

@C_CEQUIPMENT

2 жыл бұрын

Stay tuned

8/9/22. Glad u got that JD455 with missing track rollers safely home & unloaded...that is a mess when tracks/intermittantly cannot move ! I was yelling at my cell phone while watching the pulling/dragging/scrapping...then once inside yur shop...the next shop improvement became apparant...turntable...yup...that would have been handy on this bad boy. Keep us informed on problem & repair on this fine looking unit. Not mentioned was #hours on machine. Stay safe Clint & carry on sir!👍👍👍🛠⚙😊🍺

@C_CEQUIPMENT

2 жыл бұрын

Thanks 5500 hours

I hope you are able to get her running & she proves worth fixing. Since I am not knowledgeable on the mechanics of these machines, I am interested to find out about the problems on that one track. Oh by the way was interesting on how your new grader 😉😉 performed at the pick up.

@C_CEQUIPMENT

2 жыл бұрын

Yep It worked great 😁

Gonna be a good series I think… looks like runner

@C_CEQUIPMENT

Жыл бұрын

Let’s hope

Nice job gentlemen! I bet you stole that one Clint!

@C_CEQUIPMENT

2 жыл бұрын

It’s a gamble on these things for sure

MM77 Approved 👍🏼👍🏼

oh boy Clint!! We have a project and a half here lol.. cant be any worse than the other one which had the engine full of water can it??? Highlight of the video... Kev singing "Convoy" .. and the atv on the barn roof!!!

@C_CEQUIPMENT

2 жыл бұрын

Lol Yep

Cool, I have the sister to this 455G I got recently. Everything the same except the clamshell bucket. Need an Idler. Also the master track link has a broken bolt so can't get it apart easily. Once I get the track apart, I might hit you up for parts.Mine was a ran when parked. I replaced the batteries and cleaned the negative battery cable connection. It started right up. runs really well. Hope you get your 455G running. I would love to see you fix it. I am learning a ton from your channel.

@C_CEQUIPMENT

2 жыл бұрын

Yep stay tuned because you don’t want to miss upcoming videos

I am sure it will run just fine because you know your stuff

@C_CEQUIPMENT

Жыл бұрын

Let’s hope

im sure it will run kevin is pretty handy lol