Could u make a video of mark explaining why to use 5w30 synthetic motor oil and which brand he recommends

I'll be in touch im rebuilding a 1984 K10 square body im looking at using an LS1 or 3 with a 4L80E i would never send a transfer case to anyone but these guys.....

How often do I have to replace the transfer fluid on the kodiak transfer case?

We’re you located I’ll bring mine

7:40. Help i cant get snap ring to release bearing!

@TruckMaster

3 жыл бұрын

You probably need better snap ring pliers

Ok I have a 2000 cummins 4x and I want a price on a T case rebuild how much

Good job documenting everything. Quality comes with cost. But, majority of people don't care about quality, they want cheap and fast without realizing they will pay twice.

@TruckMaster

3 жыл бұрын

Your so correct

@repairvehicle

3 жыл бұрын

@Kernica1, are you looking for cheap but quality service?

Is 5w 30 synthetic engine oil the right stuff to use on these units? I have the same unit and rebuilding it and now I'm lost on the fluid to use on it

How much it cost to build a transfer clothes?

My truck isnt going in gear , I mean it will sometimes but then itll just wont, would the transfer case be a problem or the transmission, I've got a 07 duramax

I work for BorgWarner where they make transfer cases. It’s awesome seeing someone putting quality parts back into a reman unit. Companies who reman units like he said care about profit not quality! Great job and cool build.

@ronfrance4041

3 жыл бұрын

I’ve got a BW4470 with drum brake in my C3500HD 4x4 and it seems like a great T-case

@EmpoweringDIYFamily

3 жыл бұрын

Ron France I don’t build them. I work in maintenance. But I do notice they take a very high standard when it comes to everything in this facility. I feel like they build some pretty dang good stuff. I wish I worked at the plant that builds turbos too. I’d love to have a couple for my truck! 😂

Mark is a master craftsman. Please pass this knowledge in to the younger generation. No one puts effort into the quality detail that he does. Keep it up sir. Your skill is amazing. And appreciated.

Kodiak has the 5W30 Synthetic Motor oil only sticker on the T-case. Aren’t the T-Cases rated for GM’s “special” all trak fluid...which appears to be transmission fluid? Can you ellaborate why he used motor oil vs trans case fluid?

@kodiaktruck3583

3 жыл бұрын

ATF is basically a zero weight oil. your will get very hot to the point you cant touch it with out getting burnt. years ago we started using 5w30 full synthetic motor oil . you will have a 5 weight cold and a 30 weight warm. much better protection on bearings and components plus being synthetic it wont foam under load (in 4wd) like no synthetic oils.

@davidm.8717

3 жыл бұрын

kodiak truck thanks for your response! That is very beneficial information to have!

@singletrackid3172

2 жыл бұрын

That being said, is an oil change at the same interval while using 5w-30

It’d be cool to see more builds like this

Good I have a allison 5 speed and the 8100 ... I'm looking forward to learning something about it

@mrgmc6314

3 жыл бұрын

@Andy Pedro About 12 mpg with the 8100 allison transmission 4x4 crew cab short bed on 35 inch tires .. it's not bad considering it will tow anything and pushes my 9ft plow with ease ...and even loaded it gets about the same mileage....

My question about these transfer cases is this: why can't GM provide transfer cases without all these issues?

I did the Kennedy diesel pump rub fix on my 05. 8.1. Still only at 76, 000 miles . I’m good for a while

Kodiak Truck's is a awesome 👍 my 2004 Transfer case we got back in June or s working wonderfully thanks a bunch.

@TruckMaster

3 жыл бұрын

Thanks awesome

Salute Mark does a awesome job

Awesome shop!

Any idea why Mark uses 5w30 synthetic motor oil in his rebuilt transfer cases versus traditional fluid?

Love these vids I’m super stoked about this truck

@TruckMaster

3 жыл бұрын

Thanks 👍

Great video I like what Mark say about the quality over quality 👍🏻 to him great job

I have 75,000 miles on my 07 lbz and I can’t find my owners manual which fluid do I put in my transfer case thanks

@TruckMaster

3 жыл бұрын

5w30 synthetic

@Bryon630

3 жыл бұрын

@@TruckMaster thanks

@Bryon630

3 жыл бұрын

Will transynd work I have a bunch of it

@toddlower8772

3 жыл бұрын

Me too I am planning to use the same oil as the transmission transynd. In a comment above though someone asked and you said the 5-30 but someone commented something about a pump and didn't elaborate. Thanks love the work you put into this.

@Bryon630

3 жыл бұрын

@@toddlower8772 Allison transmission Northwest division told me that’s what they recommend so that’s what’s going in both I guess

Awesome content

Mark built a transfer case for my 07 Tahoe, works great!

Mark deserves ALL the customers. Love seeing someone putting quality over quantity. Rare find nowadays.

@TruckMaster

3 жыл бұрын

Definitely

@jaydunbar7538

3 жыл бұрын

Its not rare at all, its a simple matter of what people are willing to pay for. If you want the attention to detail you need to offer fair trade for the persons time, amd most would rather have the lower price so thats what shops give them. That doesnt mean those same shops can't do a top notch job if you tell them what you want and, just don't expect it at the advertised bargain price.

@Turner2211

3 жыл бұрын

Jay Dunbar agree to disagree lol. I’ve overpaid plenty of people that want to cut corners in order to increase their profit.

@MS-es9hm

3 жыл бұрын

@@Turner2211 Yes profit is primary driver for many shops; but there's also the quality factor of the tech/owner of that shop. Some techs may just not know or try to know enough to build the best of the best no matter what they may charge. Mark clearly kept digging/learning until he was completely satisfied with the end product that would represent his brand. Many techs would just look at the factory set up, determine it was bad engineering and then tell the customer to "expect" sub par performance or that it had to be rebuilt more often because of bad design components. I understand what Jay is saying in that you can go to a shop and ask for the discount build and you might be able to ask for the primo build. But will that shops' primo build be as good as Marks? Perhaps/perhaps not..... With videos like this we get to see a quality build and we can choose to use Mark or at least go to our own local shops with eyes wide open and expectations where they should be. :)

That truck is going to be bad ass

Very interesting video ! This guy definitely knows his job... awesome 👍🏻

Thanks for sharing the info. This stuff is so valuable to me as I am still learning. Big takeaway is that Kodiak does it right!!

@TruckMaster

3 жыл бұрын

Thanks 👍👍

It’s an incredible pleasure to watch Mark work! You can tell this is what he was built to do. I don’t know why Marc got into this line of business but when he got into it he was “all” in. I could watch him do this all day and I would still be in awe of this mans talent and knowledge. I think when I get my LLY Duramax diesel if it needs any of this type of work I’ll just drive from Atlanta to Wisconsin!🤣

So cool!! What great people to allow you to be there and film. I’m sure their sales have gone up to lol. Looks awesome

@TruckMaster

3 жыл бұрын

If there sales go up they definitely deserve it. It’s really cool to see shops like these that still exist 🇺🇸👍

@rickypisarchick5608

3 жыл бұрын

Truck Master that’s the truth

You saved anouther truck I like this shop guy some people don't take pride in their work anymore 🇺🇸🇺🇸

@TruckMaster

3 жыл бұрын

Thanks

Do you know if you will be doing a 5 speed Allison build with Mark on the channel.

Mark is the man !

This build series is great

Another cause of pinion bearing failure is the fluid level not checked during oil changes in the front differential.It does not take that long to remove the fill plug inserting a long small screwdriver checking the fluid level pulling it out to see if there is gear lube in it

Mark definitely takes his job serious,this is what it’s all about quality over quantity the money in his eyes isn’t worth much instead his work ethic shows mark would love to get a transfer case done from you ballpark figure love the content as always

@TruckMaster

3 жыл бұрын

Thanks

Really like your videos. I've got a 05 GMC LLY. Love the truck! Baby the thing, only 125k on the truck. Basically a stock truck other than a 65 horse tune. Thanks!!

Called Mark. He sent me here. Now I understand and will only use these guys. Quality should always be rewarded! Thank you so much for the content!

@TruckMaster

3 жыл бұрын

Thanks Chris

This guy knows his stuff

What benefits do i get when getting one of his transfercases?

@TruckMaster

3 жыл бұрын

The three bearing design in the mainshaft less friction better mpg and it last longer

Amazing... great video. Have to say, sucks Mark is way up north... as I live here in south Alabama ! But having scene his work. I would make the journey to have him do the work. Fantastic quality. You have a great setup and relationship there with Mark and Ryan, along with the folks at HSP. Curious, in one of your posts. You introduced a former Marine out in California running a fab shop. Are you looking to introduce any of his products into the build ? Cool thing about this Josh..excuse me .. TRUCKMASTER...lol, well deserved respect... You have all winter, as it approaches, to put this build together. Go whole hog... dually, dual turbo... full tilt ... lol.. I think it's great, and no matter what it's a great project and build...looking forward to seeing what's next..

@TruckMaster

3 жыл бұрын

Thanks Ron I appreciate the nice comments and definitely! Rory out of LA Ressurected Diesel. He is a good friend and really knows his stuff

I put a shift kit in my 02 Duramax and it literally leaked after every time I would drive it was so dumb but I can’t wait to see your project Duramax when it’s done.

I have a question for Mark. Off typic but i run amsoil in my duramax and have for most it’s life. Thing is it does use some oil between changes and I was told if I went back to conventional oil I’d most likely not use as much if any oil between changes as was told my rings would seal up better. Thoughts? Thanks much

@2015_Rubicnn

3 жыл бұрын

Wouldn't question be more toward Ryan?

getting ready to go cross country in a 2007 lbz over memorial its such a great truck to travel in

Great work ethic, Mark 👍👌

Mark is the master. I enjoy watching mark rip the stuff apart an tell what wrong with it an why it happened. Great content Josh

awesome video!!

Is it true that the Allison five speed transmission HAS a sixth gear, you just have to upgrade the valve body? Like Duramax tuner?

@Re-engineer_everything

3 жыл бұрын

duramaxtuner.com/6-speed-conversion-kit-1177.html

@unclebubbaknowseverything9143

3 жыл бұрын

@@Re-engineer_everything do you have any experience with this?

@Re-engineer_everything

3 жыл бұрын

@wes kovar I do not. It appears like it’s like doing the shift kit but I don’t have experience with either. Nothing is as easy as it appears on paper.

@jesusberlanga4346

3 жыл бұрын

There are videos with people who have this kit and nick from duramax tuner has a video talking about it should be easy to find on here

@Yippa391

3 жыл бұрын

Expensive as hell

Man I wish I lived closer! Shout out from southern pride Georgia! Keep the great content coming. Thanks guys

@TruckMaster

3 жыл бұрын

Thanks Roger

Hell yeah keep em coming brother this is great especially all the information you share for your subscribers helps me with my lb7 !!!!!! Thanks brother

Cool. 👍

I love gmc Sierra 2500 hd

I'll have to remember the 98% discount when I go up this fall to get the transmission and transfer case.😁

@TruckMaster

3 жыл бұрын

😂😂

Whats marks thoughts on using anaerobic sealant instead of silicone?

Marks the shit man !

Hey Truckmaster, Great videos, I really love learning how to do some work myself. I am about to change the transfer case fluid on my stock LLY and it says use ATF, but I see Mark has 5w30. Is that best for stock transfer cases? Or stick with ATF?

@TruckMaster

3 жыл бұрын

Yes definitely go with 5w30

@repairvehicle

3 жыл бұрын

It depends. If you have oil pump then you can go with 5w-30, if not atf might be better option.

I have a lly, can I just change valve body and Ecm to get a 6 speed.

@2015_Rubicnn

3 жыл бұрын

Yeah, get a hold of Duramaxtuner.com and they will hook you up.

hello from a Canadian Vet (30 years)

Someday you fix up or update parts on my LLY

It's great to see folks that are masters at what they do! Let's Go Brandon!

Only thing holding my truck up from driving is the damn injector return lines it’s a shame I can’t get it done myself

Yoooo

You skipped the important part

Josh has there been any issues with the plastic fork? I'm sure if Mark is using them they must be high quality but plastic just doesn't sound right for a shift fork.

@TruckMaster

3 жыл бұрын

It’s very common they all have that plastic molding on the forks but I agree it’s interesting how they use plastic material inside these units

I really wanna see a street truck build

@TruckMaster

3 жыл бұрын

Hopefully the Wifemax will be that build

Mark. Please come up to Nova scotia and help me with Diffemax. It's quickly turning into cursedmax. Ill buy your plane ticket.

@TruckMaster

3 жыл бұрын

Looks like Mark needs to pack his bags 💼

@Yippa391

3 жыл бұрын

Didn't mean to creep poor mark out. Just neck deep into a victory max type build. Can't afford to touch trans and transfer case.. I'd order from Kodiak in a heartbeat but being in Canada.... Im sure it's financially impossible. I had truck running and started to button it up. Now it dies everything but turn when I turn the key. Something done got fecked.... I'm about ready to burn it

Can kodiac turn a 5 speed to a 6 speed?? and tune the tcm??

Truck master what ever happened to that kid mat at diesel pros and performance near your home town u haven’t done anything with him in awhile

@TruckMaster

3 жыл бұрын

We didn’t agree on a few things so it’s best to not make videos there anymore

@dylans4788

3 жыл бұрын

Truck Master his loss on business and publicity of the shop!

I think Mark should sell a rebuild kit with an instructional video for these transfer cases. I'd love to rebuild mine since it has so many miles on it.

For truck masters next build he’ll be picking up my classic body crew cab LBZ gmc and doing a square body swap:-)

@TruckMaster

3 жыл бұрын

That would be awesome

@WildhurstLodge

3 жыл бұрын

Truck Master you think I’m kidding ....I just bought a resort, Wildhurst lodge and campground, bring your family over to Minnesota’s North Shore for a vacation and take my truck back with you:-) I’ve got a cabin and turbo rzr for you to enjoy while you’re here. It’d Be a great collab!

How much would he charge for a rear diff rebuild?

@TruckMaster

3 жыл бұрын

Check out his website kodiaktruck.com

Seems very expensive

Hi

@TruckMaster

3 жыл бұрын

Hi 👋

School is in session boys and girls!👍🏻💪🏻🇺🇸

These guys at Kodiak know their shit. I hope they've gotten an increase in business from your vids

Where can I buy aluminum case?

@repairvehicle

3 жыл бұрын

Dealers

I got a question how much is gonna be original build

Miss my LB7, if ya have one dont sell it. Regret will soon follow.

@TruckMaster

3 жыл бұрын

LB7 for the win

Hey I’ve been watching your videos and would like to ask you some questions

Why 5/30? Is there any particular reason he doesn’t recommend autotrak? Does mark use different components that don’t do well with autotrak or atf? Just wondering if that’s specific to his builds or if that’s a general consensus for all these cases

I got a service 4wd what could it be ? My cts2 won’t pull that code

@TruckMaster

3 жыл бұрын

It could be your 4x4 actuator it’s located on your front differential

@JCL404

3 жыл бұрын

Truck Master I hope that it... but it sounds like it wants to engage

2 views and 4 likes posted 30 seconds ago. Something is suspicious.

@TruckMaster

3 жыл бұрын

KZread and there crazy ways 😂

@moose6536

3 жыл бұрын

I know right

As soon as I can afford it I'm getting my transfer case from Marc.

WHATS GOING ON WITH THE WIFE MAX SHE GET HER RIMS AND TIRES YET

@TruckMaster

3 жыл бұрын

Not yet but they are enroute

This makes me really not wana look at my transfer case in my ram it's original and has over 300k 😅

@TruckMaster

3 жыл бұрын

Yikes

Con you ad y91

When i get a LBZ i will definitely be sending Mark a lot of work!

I hate when “others” take the cheap way out, it’s not good for business and is potentially dangerous for the client 🙁

The Duramax is the biggest piece of junk when it comes to a diesel motor on the market and I can't believe Chevy went to them

@TruckMaster

3 жыл бұрын

I totally disagree. Switching from the 6.5L to the 6.6L was the best thing they did. I only wish they would have went straight axle like ford and dodge

@GOFast-dy4jk

3 жыл бұрын

300 plus k miles on my lbz says otherwise on being junk. But each to their own on opinions. It’s all good in the hood.😂

@2015_Rubicnn

3 жыл бұрын

Nice one troll.....🤣🤣

@garyroach3479

3 жыл бұрын

@@2015_Rubicnn oh I am a troll sorry to piss in ur Cheerios but I have owned a Chevy with Duramax diesel motor in it and I think it's a piece of junk motor but if u like them great but guess u get but hurt when someone post their opinion about something u don't like huh

@2015_Rubicnn

3 жыл бұрын

@@garyroach3479 No need to be sorry about being a troll, we know you can't help yourself. No one gives a shit about your duramax experience. Some how you feel the need to say something is a piece of junk based on your own opinion. So you're one of a small fraction of vehicle owners who has issues with something 🤷🏼‍♂️, so you feel the need to throw out a blanket statement....cool. That by definition is a troll.

Does mark suggest adding 3 quarts of 5w30 thru the speed sensor. Thats how I do mine. I see he suggest the same oil. Just wondering if he suggest using fill plug method or sensor method. Thanks