This is the Best review by far of these WE Glock MOS models. Thank you, BCA. You guys are professional. Subbed!

@BigCrocAirsoft

2 жыл бұрын

thank you , this means a lot

great video!

@BigCrocAirsoft

4 жыл бұрын

Thanks!

beware, the slide catch on the Gen 5 MOS will eat the slide, and eventually stop it from locking back on empty.

My advice to everyone is to put a little silicone oil in the hinge and inside the trigger and try to replicate slide release and fire a couple of times.. I can promise u it will work fine after that.. I Have g19 g5 mos and I found that they are heavy lubricated from the factory and look like machine grease.. So it did not work 100% because of that heavy lube

To Those FPS Wise, Dont Rely on MOS for their FPS is Way Lower than the Standard Ex: WE Glock 17 Standard (gen 3 to Gen 5) 340-370fps WE Glock 17 MOS (Gen 3 to Gen 5: Modular Optic System/Optic Sight ready) Max at 310fps (Almost same FPS With Tokyo Marui But the Great Thing at Glock MOS, Their Magazine is Cheaper Vs Standard. How To Recognize? Standard Mag has Rectangular Gas Route MOS Mag has Square Gas Route The Reason why MOS has Lowe FPS Because the Opening opening Of Both Loading Nozzle and Gas Route are Wider than Standard. Hence, Both WE Tech Airsoft Taiwan's Glock are A Great And Reliable and Durable Airsoft units

Do you know when the MOS slides without the BBU will be available since these are relatively new? I already have some rounding on the slide stop notch

i need an airsoft g19 with MOS for training. which is better? WE g19 gen4 MOS or WE g19 gen5 MOS?

So the MOS has proprietary nozzle and BBU system? Other parts like inner barrel, chamber, sights, and hammer housing should still be compatible with regular models right?

@BigCrocAirsoft

3 жыл бұрын

Barrel， chamber is the same. Housing might be a little different

@MrCoffee0996

3 жыл бұрын

@@BigCrocAirsoft I see.. always been wondering about WE Glocks. They have so many variations and comes with metal slide, barrel, and threaded outer. But people always tell me to go with TM Glocks haha.

what cheap old mag can use new WE 19 mos versions ?

Have you tried the MOS mags on regular g17 pistol? If so, any noticeable differences?

@BigCrocAirsoft

3 жыл бұрын

I actually havn't try it before, but I wouldn't recommend it because of the different shape on Mag gas lip and old gen Cylinder base opening

@basketcase1235

3 жыл бұрын

@@BigCrocAirsoft are the WE MOS mags the same as the mags on Armorer Works' VX RMR series?

@BigCrocAirsoft

3 жыл бұрын

Its different,l

I really want to get another w.e glock, but the one I bought a while back really wasn't that great, it was my first w.e pistol and it just felt like it was shooting really weak. It was a gen 3 g17, when I bought the elite force glock 17 gen4 it felt way more powerful when shooting, also with the w.e g17 I had the issue mentioned in this video which is gas running out before firing all bbs, even when using the much better elite force mags. The reason why I'm looking into w.e again is because I want a glock 19, but elite force at the time of this comment only offers it in a gen 3, at least in the US, and I really want it in a gen5/gen5 mos but I don't want a dud like the last one I had, but I also feel like seeing as it was a fairly old gen gun, and it was only my first experience with w.e pistols, and it was maybe an old/flawed design I should give them another chance, especially seeing as they have changed the mag design to be better with gas as shown here. Any ideas? Opinions from experienced w.e glock owners? $150 shipped for the w.e g19 and its the gen I want and is a bit cheaper than the elite force but may or may not preform as I would like or $170 shipped for the EF glock 19 and it will preform the same as my other 3 EF glocks, but is an old gen 3 that I really don't like and will be hard to find a mounting platform for rmr sight that works.. Give W.E another chance? Just wait and see if Elite Force comes out with a newer gen 19? I know in the uk they have a gen 4 19 but idk about a gen 5. Help plz.

@mattivirta

3 жыл бұрын

WE have midlle guality wery good gun what i has test now sometime many option and i has select best gun good price have glock 19 MOS less than 100$ and guality wery good than my old douple bell shit or umarex trash. tokiyo maryi and hi -capa models have lot better but have lot too ower price and expensive too.WE only problem have weak poor FPS. if umarex have normal 400-490 FPS WE have poor 200-250 FPS only shit., good gun but poor power. how can increase power more ?

Is this green has, CO2 or both?

Do you know if they fit real steel Glock holsters? I know that was an issue with earlier ones.

@BigCrocAirsoft

4 жыл бұрын

That i am not too sure, but if its a kydex holster, can always adjust the shape of it by using hot air gun

@Stealth639

4 жыл бұрын

No, they don't fit real steel holsters.

@xuhaoping4360

3 жыл бұрын

depends on the type of holsters, the TM spec Glock has a thicker slide, so most kydex type holster will not work. But for something like the safariland als system, usually it will ok, especially those made with slots for gun light.

@mattivirta

3 жыл бұрын

holster steel ??? newer not has hear, cydex,pvc,leather have lot holsters and cheap plastic too.

compare with G17 GEN5 normal one, which one is better?

@BigCrocAirsoft

3 жыл бұрын

MOS better

That straight elbow is gonna kick the hell out of ya when you fire a real steel, just FYI.

@basketcase1235

3 жыл бұрын

i don't know about you, but i see a lot of people shooting variations of that "straight elbow". i tried it, it does help with follow-up shots since the gun (and thus the sights) resets on target quicker.

slide is metlat or polimer?

@BigCrocAirsoft

2 жыл бұрын

slide metal, frame plastic (polymer)

Is the 19 MOS compatible with TM G19?

@BigCrocAirsoft

3 жыл бұрын

the mag? it can shoot but since the shape of the gas lip is different, it wouldn't be efficient

@Trash_Panda_97

3 жыл бұрын

@@BigCrocAirsoft how about the parts? Are they compatible?

@BigCrocAirsoft

3 жыл бұрын

Maybe only inner barrel and bucking. New TM G19 uses new hop up system, chamber is different. WE MOS uses special BBU housing, different from TM

Are these a 1:1 clone?

@BigCrocAirsoft

3 жыл бұрын

they are TM spec so no sorry

The trigger safety not always resetting on WE Glocks really bothers me. It's such a simple and easy thing to get right, but WE never fix this fault. I usually install a Guarder trigger on my WE Glocks so that I have properly resetting trigger safety.

@mattivirta

3 жыл бұрын

how can modified guard trigger out and normal good trigger back. this have big shit no newer need anywere gun somethink shit guardtrigger.

which one is better?

@BigCrocAirsoft

3 жыл бұрын

I always like G17 over G19

@Matthew-wf3mv

3 жыл бұрын

@@BigCrocAirsoft thanks for your opinion

@mattivirta

3 жыл бұрын

@@BigCrocAirsoft but g19have lot better handle and carry and use. MOS version better options can select what sight use. G17 have shit many thinks. and G19 have world most buy gun ewer.perfect and best all world real and bbgun. most selled gun all world.

Has anyone tried using the sled without having a MOS plate on it? Here where I live it is currently cold and I would therefore like to remove the extra weight, but I am a little unsure whether this makes the sled more rigid and therefore more likely to break?

@BigCrocAirsoft

Жыл бұрын

I would be more worry about stuff(dirt, sand) getting in the chamber unit through the holes tho.

Is there a way you could give us a link where to buy these?

@BigCrocAirsoft

4 жыл бұрын

Try kyairsoft.com Thanks!

What gas does the g17 uses

@BigCrocAirsoft

3 жыл бұрын

WE green gas, similar to top gas from RWA

@multipleyt-vlogs-gaming1619

3 жыл бұрын

@@BigCrocAirsoft so basically this uses Green Gas

@multipleyt-vlogs-gaming1619

3 жыл бұрын

@@BigCrocAirsoft and what bb size does this shots

@BigCrocAirsoft

3 жыл бұрын

Yes just green gas, 6mm BB

@multipleyt-vlogs-gaming1619

3 жыл бұрын

@@BigCrocAirsoft does this use any green gas

Can you use old gen magazines on the MOS?

@BigCrocAirsoft

2 жыл бұрын

no, as explained in the video, the gas lip is different

WE or TM?

@BigCrocAirsoft

2 жыл бұрын

All WE

@gango5040

2 жыл бұрын

@@BigCrocAirsoft looking at getting a glock would u recommend VFC, TM or WE for my first stock glock

@BigCrocAirsoft

2 жыл бұрын

For mos go with WE, G17gen5 go with VFC. For custom build later on get TM (more after market kit)

@gango5040

2 жыл бұрын

@@BigCrocAirsoft alright