Beautiful frame, Great New Re-Done YD100 Great build w/disc front and rear, A very highly sought after setup for all to buy! It has taken some years now for it to be done right but finally a Real Setup can now be purchased, Great Video As Always Alex 👍

I put a Predator 212 in my Giant frame, Honda 10 amp charging coils, a 7" Harley led headlight, bullet style led tail light with brake and turn signals, 14" riser bars, Rock Shock front end, with 4 piston hyd brake. Comet 30 trans, and a 6 spoke mag wheel in the back, with 2 canvas saddlebags slung over the back rest. A 2 gal gas tank sits on the crossbar, With some flowing, jetting, big air, and smooth exhaust, the engine produces about 10 or 12 hp, which gets me over 70 mph, but I keep the throttle stop screw set at 80 kph, which keeps the rpm's under 5,000. I can pick up the front wheel almost effortlessly from a stop, and it rides like my old 76 shovel head Harley. If you want a more serious ride, I highly recommend the Monster 90, 78.5cc 4 stroke engine, using a Comet 20 trans, and Go Power Sports Juggernaut clutch. You won't need to modify the frame to fit the Monster engine, but you do if you use the Predator. These engines will outlast those China Doll 2 strokes, 10 times, or more. I've been riding mine over 7 years, and it runs like new. I think it will probably outlast me, as I'm 70, blind, and deaf. Wish me luck.

Love the brapp cage. I just got the gold rear gas tank today and I’m ordering the gold pipe to match. They have improved the spoke wheels I’m so happy with mine.

Nice build good to see you still at it been around building these bikes since 09

What an awsome bike bro. Looks real nice. Sounds good too.

Awesome built my friend!!

Love the truing stand! Thanks for the idea!

Beautiful build!! A+ love the gas tank.

The little edge on the tape is going to shredd your shock seals

Volume level all over the place! Nice looking bike!

Nice bike! Just love your truing “stand”! So simple!

I dig these kinds of videos

Just starting out in motor bikes my 1st absolutely awesome on my second, thanks for the old forks truing set up, great idea & free, & I have all the materials 😂

Always nice to see you post

Gold tape the outside edge of wheel rims be the finishing touch.

Love the bump start! Takes me back

I didn't see the wheel set do they come with the frame?

Hey Alex you should do the gas cap and gold.

Wax on,wax off Gas on,gas off

Just picked up that motor. It looks good, and I can't wait to get it on a bike! Thanks for the build plus ride, brother! Good work! 👍 ❤❤

@tannerthuemmler7132

Жыл бұрын

where can i get the motor? cant find it.

@catsbyondrepair

Жыл бұрын

​@@tannerthuemmler7132 It has that darned g4 style cylinder they wreck rings after 6 months like clock work

@dietznutz1

Жыл бұрын

​@@catsbyondrepair some Chinese garbage isn't it ? Wouldn't bother

Love the blue and gold color combo looks great…

What's up love watching you build bikes I am wanting to build me one I'm from bogalusa Louisiana

that bike is sweet . nice color combo .👍

I own Schwartz 15 speed limits bicycle I purchased from Walmart 25 years ago

Nice ride Alex

Alex send me that frame to Portugal! beautiful bike buddy

this looks cool

You are awesome!!

Kickstand with the gold tape and forks are impressive.

Nice builds bro, u help me out a lot with your vids, keep it going bro 👍👍, I got the varka scooter cause of your vid on it, that thing is fast, did not even get to 3rd gear yet, lol 😅😅,

Hi Alex, very nice bike! You know what would give the bike that extra special something... Paint a long, horizontal, tear drop shape, gold colored decal or stripe along both sides of the blue colored gas tank. Start with the round part of the tear drop shape at the front part of the tank...👍

That's going to look Great

how fast will that 100c engine go?

Hey Alex from the czech republic. I purchased the 100 max cylinder to upgrade my yd100 to a 2 piece. Cool cool bike man

@chadhunt6596

Жыл бұрын

How did it work out? Hi from America

@Matthew-wj8cm

Жыл бұрын

@@chadhunt6596 it's not here yet😁 it'll come in 14 days, I'll make a video on it sometime

@catsbyondrepair

Жыл бұрын

It's not a upgrade the open transfers wreck rings

@Matthew-wj8cm

Жыл бұрын

@@catsbyondrepair did it break on you?

@davezoom-yb8pm

9 ай бұрын

How did it work out?

Whats up guy I have the same engine I can't get it to idle

I cant wait! Watching this in anticipation of my brapmobile .( Its adam from PA)

built 2 motorized bikes, FUN to build! But rear bearings gave out even when I packed them with grease

@cameronbernhardy8357

Жыл бұрын

A lot of the time it’s not the bearings “giving out” , but I find the bolts move a lot with coaster brakes

@marcusgondorcin7181

Жыл бұрын

@@cameronbernhardy8357 non coaster brakes

@catsbyondrepair

Жыл бұрын

You over tightened them

@keithjorgensen3273

Жыл бұрын

Same

Looks great. Just one thing, take off those silly reflectors on the rims. Would look cooler without them. Bike sounded great too. I'm going to smash the like button.

@chadhunt6596

Жыл бұрын

Also they throw the wheel out of balance

@catsbyondrepair

Жыл бұрын

Legally you have to run reflectors

@roydunn4649

Жыл бұрын

@@catsbyondrepair There are better reflectors out there.

Very nice colors. Great bike. Please tell me how did you filmed it? Some special bracket? I would like to film my ride too

Bad ass bike bro.

Se ve muy bien! Pero en realidad es un dolor de cabeza! Vas a estar más tiempo arreglando todo los tornillos que se afloja con la vibración del motor que manejando!

While I love your "mods,and builds",I asked for all of us who can barely add to our bikes>Look at my next post here.We can't spend $5-600 for a frame.We have a bike,like You started with.Please remember us and Do videoes for Us too.TY.

@MotoredLife

Жыл бұрын

I still ride my Cranbrook everyday. Want me to record while I go on adventures to the store?

Bueatiful! Sound great.

Happy to subscribe

This 🔥🔥🔥

In the South we call those pipes leg burners. Why put it there where you are destined to get burned?

That gold pipe nice the frame paint that blue killer

I’m working in my shop now and listening to you building your bike while I’m working on a $200.00 budget motorized bike

How’s the vibration on this thing?

best thing ive done is get a $180 rockshox 30 Silver TK and a $80 SR Suntour SP12 NCX seat post . i run my cables/wiring in expandable cable sleeves and use a $13 bmx hallow stem bolt to run the front brake cable threw the stem . clone vm18 mikuni carburetor with a k&n type filter is a must have to get those motors tuned right and nice

Hey alex how fast should I run a yd 100 100cc during break in because it at a slow speed it jurky.

Nice bike,I have one very similar

Do you guys recommend using an expansion chamber during break in? Is there any harm in the longevity of the engine?

@leonschneider395

Жыл бұрын

i did

@11sjv

Жыл бұрын

expansion chamber is good for the bike

Looks very cool, hut that 2 stroke corn popper sound drives me nuts... a 4 stroke would be very nice....

I just ordered the same bike , I was wondering what size handlebars can I use , I want bmx or ape hangers do you have Any links for other handlebars that will fit this stem?

Nice 👍 build.. I built a few 2ts had my custom redone phatmoto 4t for a few years but now if I'm going to push the legal limits of what is a bicycle I'm sticking with my sur-ron LBX all that noise I forgot how loud these things are lol I have the 125cc 2t power on a silent platform that I can wheelie and jump 🦘❤ and so far almost 5,000 miles and cops leave me alone for the must part been pulled for rolling a stop sign changing lanes without a signal but nothing was said about the bike itself.

i love this projects , why not a 49cc? more cheap and silence? or 4 stroke motor for garden motor?

Do you like this engine more then the Phantom v3?

Sounds so much better than any motor bicycle I've herd.

Which of the 3 engines would you suggest for long term use? Zada 80, Phantom 85, or the new Zada100 max? I'm 155lbs, travel 38 miles round trip at 24mph once or twice a week pulling a trailer to haul groceries, water, propane, gas with a couple small hills, about 400ft long. Presently running a BBR Stage 4 with a MZ 65 clone and OZ reed valve. Thinking l want a bit more torque to run a 36t and still maintain 25mph. What would suggest? My bike is a GX7 Genesis 29r

@chadhunt6596

Жыл бұрын

In my opinion the yd100 has been the best. I got over 2,000 miles out of built engine

I'm also Working on a good handful bikes modifying them

A yd 100 has plenty of power stock

Yo bro what size is your rim and your fork is it 26ER?

Cool ❤❤❤

I've been seriously looking at that bike but how are the forks are they strong??

I have a Schwinn stingray I've been wanting to go motorized with just can't decide what engine size to go with

Beautiful bike Alex! You know how to Build them Crispy 😊... Awesome 👍

What bike frame is that

Looks very good except for that chain too tight we're out the bearing on the engine and the will. And it's geared for 120 mph😊

How did the gold color hold up on the exhaust ?

good job 👍👍👍👍 from ja

What frame is that m8 , I'm stuck in blighty,,, just asking ta

💯👍👍👍👍 it wood be better if you added a pull start on the engine kit

Love from ireland

Alex? The alex that helped me out sooo much with the mags?

That tape is gonna kill the seals on the forks

I’m looking to buy this exact one on your website! Can you get it delivered assembled?

U should put a jackshaft with a derailleur on it

Did you think about MCU-powered ignition system, like for example Sparkduino?

I find the engines that have those 6 dots on the bore tend to be the best engines.

What the size of the frame

Is it possible to add ape hangers ??

Beast? Bmb.

Can you do a SICK Phantom build?

I would definitely use an offset intake or use some heat wrap on the pipe as the pipe being that close to the fuel line would make me nervous. And cold fuel makes more power.

From North Carolina does that max 100 have 10mm or 12mm pin

What speed?

I like the way the bike is made but you want to fast thrue the way that you did so it should have been done in 2-3 segments other than that fantastic bike.

that frame is electric colorwise anyone who couldn't see it shouldn't be driving

@simsum1argh882

Жыл бұрын

Driving or riding - perhaps you shouldn't be typing. Whoops, I'm an asshole.

@capolean2902

Жыл бұрын

@@simsum1argh882 lol its ok

@yournotmymaster8492

6 ай бұрын

Don't forget to get your covid booster

From Somerset KY

Dam your first ride kinda discouraged me from trying something other than my 4 stroke builds.

Hi you seem knowledgeable about this if I have any questions can I ask you questions

The triple fork tube does not line up in the top.and need up a little the gas

Wondering if it's possible to put a 100cc motor on a Himiway Zebra ebike?

I wanted to see the assembly of the forks with the steering... And they always jump past that. I think I'm missing parts

How much does it cost

Hey, alex how is the phantom 85 v3 holding up

Nice bike how much you have in it?

@MotoredLife

Жыл бұрын

These you can buy on site for $950

Just imagine the power on this frame if the engine was 2stroke 🤠

@MotoredLife

Жыл бұрын

It is a 2 stroke!

@DeplorableDiabloK9

Жыл бұрын

😂

Turn it into a trike and hopefully had a Honda a Honda 125 or 110cc or a smaller scooter engine like from Honda ruckus Or Honda zoomer engine