Working at SEMA and just walked around the car at Holley. Damn.....even better in person guys!!! Definable the gem of the booth. Beautiful job!

@mdbd1863

Жыл бұрын

Thanks for the update i hate to wait 🌹

@nsn876

Жыл бұрын

Bro ur comment saved me from a heart attack

@street_toyz

Жыл бұрын

Crank it over for us 🥲

@veltruski

Жыл бұрын

Tell them to check the solenoids!

@wallyhutjr

Жыл бұрын

can you get me in, im working on the fountain blue next door

You guys looked so exhausted that at time-lapse speeds you were actually moving at normal speed. Hoping you guys get it running

I'm only three minutes in, but... Oscar did a great job.

@Bullwinkle056

Жыл бұрын

Oscar is a beast!

@ethanbuehlig

Жыл бұрын

As always

@wbr7869

Жыл бұрын

He looks soooooo tired!!!!

@roybevins8682

Жыл бұрын

Whatever he pays Oscar it isn't enough.

@fredrik4353

Жыл бұрын

Oscar > Chris Oscar deservs all the cred for this build

You know Chris is tired when he says “the car has to be finished by 5pm tomorrow morning” 😂 good job fellas!

@kiesh.

Жыл бұрын

Haha was reading this comment at the moment he said it, quality 😁

@BoostAlmighty

Жыл бұрын

Noticed that too.... TWICE! 🤣 🤣 🤣

@swaggpapi5817

Жыл бұрын

I was like ayooooo Chris the math ain’t mathing chief 😂😂😂

Need to give Oscar a round of applause, pat on the back , a cold beer , and a healthy raise .... helluva job fellas ... it been great watching this build with you guys ... thanx for all y'all do ,, and don't do ... can't wait to see what's next

@kevinmcintire9642

Жыл бұрын

Yup Oscar definitely needs a raise

@ernestomejia110

Жыл бұрын

A raise??? A demotion maybe. That schedule was horrible. They had to send the car unfinished to SEMA. It didn't even run. With piss poor planning, you get piss poor results.

@kermthepilot

Жыл бұрын

@@ernestomejia110 you couldn’t even do what he does

@ernestomejia110

Жыл бұрын

@@kermthepilot i don't think anyone would want to do that either.

You guys drive me nuts doing all this last minute. Next year I'd like to see you have more time and not be so tired

@ontil68

Жыл бұрын

I'm feeling like, after reading a few comments, that maybe they do it this way for the nail biting endings.... You know.. for content. 🙄

@SomeoneAwesome3998

Жыл бұрын

@@ontil68 I’m wondering if they are just the type that thrive when they work under pressure. That’s how I am. I prefer running myself out of time.

@austinh1028

Жыл бұрын

@@ontil68 when you don't know for sure that you even need the car for SEMA, it's hard to focus on it

@Forcefed2002

Жыл бұрын

@@ontil68 100% fabricated anxiety

Please give yourself more time next year. It will allow your crew more time for rest, and probably give you more time to get the build(s) 100% complete.

@fredrikandersson3885

Жыл бұрын

higher quality too, they prolly had to cut tons of corners, not to mention not paying attention to the aerodynamics of the one seater aswell, it has a potential to be a savage car if the car was designed with functional aero instead of JUST looks.

@maquettemusic1623

Жыл бұрын

@@fredrikandersson3885 they're not out to design for aero. That is an extremely complex and difficult thing to do. That is the job of auto designers, not fabricators like these guys.

@malbers35

Жыл бұрын

Thanks Captain Obvious.

@duncanteunisse9700

Жыл бұрын

@@malbers35 🤣

@duncanteunisse9700

Жыл бұрын

@@fredrikandersson3885 the cost alone for use of wind tunnel is insane

Seeing the shift knob choice, gotta give y'all credit for not holding a grudge. If what happened to the *ahem* earlier build happened to me, it'd 100% dampen my enthusiasm for [REDACTED].

@FiftySixishTV

Жыл бұрын

Last thing I would want is a reminder of what those assholes did

@blvckskull7954

Жыл бұрын

The one thing that shall not be named

@jasonwang9176

Жыл бұрын

@@blvckskull7954 This build looks better anyways lol

@briancorrigan5350

Жыл бұрын

If you leave the keys around, that thing would be gone in 60 seconds...

@timwegman5776

Жыл бұрын

Why did this take me so long to figure out what you were talking about I mean that was like one of life's most devastating moments, this is a great redemption car at first I wasn't too excited about it but then they changed the design and wow they really hit it out of the park.

Oscar is for Build. Seriously that guy deserves 90% of the credit for this and so many other projects done on this channel. Honestly Chris, you need to give this one to Oscar, he deserves it.

The fact that you built and installed a header with nitrous and also swapped a wiring harness like it is no big deal in an episode of this build says tons about how hard you guys worked. Alot of people would make a 5 part series about that process. Congratulations!

I think this is getting dangerous for your health already and Sema isn't worth of it. Look at Oscar, i have never seen him like this, he's completely out of energy.

Just saw the car at SEMA and it is absolutely impressive what you guys have done. Shout out to Oscar!

@toddaulner5393

Жыл бұрын

You rock!! Thanks for updating! These guys were Pitbulls on it!!!

Love the shift knob. A kick back to you know who 😆

Damn man you guys have done so much work on this car and I love it! The whole team deserve a fun holiday somewhere warm soon.

@chadvarnell1889

Жыл бұрын

I agree 100%! I also feel I should be part of the team...

I have always hated yellow lights on cars but for some reason that looked really good on this car. I agree with the crew they looked so clean. Great job on the build!

@DrTheRich

Жыл бұрын

Yeah same. I mean I probably still hate it when it is coming driving towards me at night. But it looks so good during the daylight

That stance is so sweet. The fender width and fitting of the deep lip wheels is true art.

I really hope he pays Oscar well, he's indispensable.

Saw the title and said noooooo😭 let’s see how this pans out🤞🏼

@avslagen9640

Жыл бұрын

frfr

@kyddzofcali

Жыл бұрын

I seen the ig post and knew this was clickbait

@drewlinton-newhall5831

Жыл бұрын

@@kyddzofcali lol

Well check the parking shifter sensor, because the car started right before he changed the shifter. Oscar will know what I'm talking about. The sensor that tells the car it's in park,or you have your foot on the clutch pedal so you can start it. You guys did a fantastic job good luck at SEMA .

3 in and 1.5K views. I have never invested in a project, this much. Ever. I'm literally holding my breath. Hope you guys can make it in time.

If you by chance haven’t figured it out yet, on a swap I did the ignition wire I originally tried to use would cut signal while cranking. Worth a check if youre still in a bind

Impatiently waiting for the finale to post!

Damn you guys 😦 the way you commit yourselves to work and the energy you give to keep us entertained regardless of your fatigue is amazing, I'm happy to have followed this channel years back. Hope you get your diagnostics right and start the car. Peace ✌🏿.

This bad boy is a giant slap to the e who shall not be named people and I’m loving it! 😈

7:36 i see what you did with that shifter! Well played! 😂😂😂

It could have ended better but it does not diminish your superhuman efforts. Major, MAJOR kudos to you guys. 👍

I’ve checked multiple times for this video today car looks insane! You guys have killed it!

You guys have killed it once again, you work so hard ! To pull this all together is heroic! Good luck starting it. Will be something tiny you haven’t thought of.

Oscar is an unbelievable fabricator and valuable part of the team.. Your build will be a number 1 head turner at SEMA.

Dang dude, don't over due it.. Mind you all the work might be helping :) Stay safe, you look healthy for not sleeping for so long in your condition... Hat's off to you and the crew..

Nothing short than beautiful…… amazing work guys just like always never seem to disappoint

What's most impressive is your attitude!!! Noway I could keep my composure!! Great job guys

Hope you all take a relaxing break after getting all these projects done. You all deserve some rest after that marathon of a build.

Looks amazing

Man you guys have pushed so hard, WELL DONE! to all of you for getting that to that point in such a short time. Great job Chris, Kyle and Oscar!

If you replaced the sensor you might have to go thru the setup process on the controller before it registers. I just seen someone else have the same issue

@kiesh.

Жыл бұрын

Fab rats?

Maybe start next year's sema build in June. Its a hell of a build but its hard not to think of how much more over the top it would be if you had started sooner.

It was like a sweet NOD 7:36 of the head to pay respect to what was in the past without even saying a word. That was a great one and wished it didn't have to end that way but this build is SUPER GREAT.

You guys, all three of you! Engineering these gorgeous cars! Great jobs and beautiful welding and fabrication !

This is exciting, Rooting for you guys!!!

So disappointed for you guys, you all worked so hard, especially Oscar, sleep deprivation makes it so much more difficult, it’s like being affected by alcohol. Good luck at SEMA !!!!

Brand New crank sensors can be bad out of the box too.

Dude my heart. Oh my god i couldn't even watch the last 5 minutes, i just listened, praying to hear it fire with my eyes closed. That is soul shattering.

Oh man I feel your pain! What you guys have achieved is nothing short of amazing. My hat is firmly off to you. Wish I was going to SEMA.

I hope your Monday repairs all worked! Your car looks wonderful! Enjoy your SEMA experience!

I can’t wait to see it done 💯

Just watched the last episode, refreshed and BAM!! New episode. Get 'er done, guys!

Good luck getting it over the line! So close. Can't wait to see the finished product.

Start of video 😂❤️💪👍🙏 hard work ,love videos very much

If it makes you guys feel any better my roommate has been skipping sleep because his company had vehicles going to SEMA too😂 at least you’re not the only ones!

You guys are nuts! In the best possible way!

You guys are unbelievable! I have no idea how your doing all this and giving us great content. Just amazing! Such a sick build. My favourite for sure.

Def tell you guys are putting in the work. "We have until 5pm tomorrow morning" lol. It looks amazing. Congrats to all involved. Killed it.

No need for intro bro. Both of you look exhausted. Your projects are looking amazing. I still cannot get over the fact how beautiful this menacing mustang looks! I took a snapshot of the car made it into my screensaver! Respect from Stockholm, Sweden. Btw Oscar is a beast! Is there anything this guy cannot do? 😂👊🏼The two of you make a fantastic team!🇸🇪🇺🇸 0:01

Looking good. I'm sure you'll work the bug out. Just stay positive. Can't wait to see the next video

You guys have done An amazing job! Absolutely badass car but it’s sad to see it doest start, hopefully you guys fix it before the show! Good luck!

What happened to unveiling the cars live at SEMA? I’ve seen people walking by your cars in other videos all day.

@hardup9809

Жыл бұрын

Thought the same thing.

The little "fuck you" to the lawyers, awesome! Really insane Chris and everyone else. I can't imagine how stoked all of you guys are, congrats!

You guys are absolute badasses! Major props, all these people knit picking but they’ve never built cars like this or understand Sema. Be proud of yourselves!

Nice Chris thats how you make things right it only took 60 seconds to make the shift knob, you guys are a pro team and in deed Oscar did a great job

Another episode of 'na he won't make it to Sema' for the 5th year in a row.

@bogotstogoskiing

Жыл бұрын

😆

I don't understand why you don't start the build months earlier.

Couldn't wait, for new content. Great work guys

Damn, you guys did a great job on the bodywork. I really hope you guys get it running before SEMA

Cool build -- a nice melding of Mustang and GT40. Are there future plans for inner fender/wheel wells? And what do you do about rear vision? Is a rear video camera on the to-do list post-Sema? I'm assuming there is SEMA-done and done-done :-)

@TheUnderGround979

Жыл бұрын

and a rear window in the cabin this is kinda like the mid engine dodge charger from fast and the furious 8

Damn that's cutting too close. I really hope the car is operational before SEMA. Good luck guys 🤞

Hey I’ve been following the build and I love the progress you guys put in your builds!! This is amazing and beautiful!

Seen it in person looks amazing great job to you and your team!!

Sorry things didn't go as planned guys. I'm sure you'll get it figured out as soon as you guys get some sleep. Cheers!

You really need to hire a couple more guys for pre Sema type stuff. Run a night shift.

After-hours so you couldn't call in the help you needed to I would imagine but hollie is an awesome company and they stand by their stuff so soon as you get a tech on the case it will be running in no time!! I wouldn't trip at all if I was you guys!! I have faith in all y'all plus you have an Oscar. That is a secret weapon all in itself!!

I’m really glad you guys went with yellow, I feel like it completes the entire look and ties Everything together. I can’t believe how much you guys were able to accomplish in such a short time 😅 you are simply amazing

So then B is for Broke today then.

@rhkavli

Жыл бұрын

Broken. I think they still have money.

Why don't you start building these Sema builds one month earlier so you're not always scrambling for the deadline? I understand things go wrong but you're in the same position every year. Also Boogardie is not how Bugatti is pronounced.

@Lordbignall

Жыл бұрын

I said the same thing last video..

@GioVr84

Жыл бұрын

@@Lordbignall The chase of deadline and last minute fixes and fails... are part of the show to make it more dramatic and interesting boosting the views, it s BIFB trademark guesss!!!

@ignacioalanis2330

Жыл бұрын

they not always choose what cars go or not, you gotta understand that the sponsors rules sometimes, and in this case i think they ask for both cars, knowing the kind of cars that are displayed, a hand made futuristic f1 car and a super wide body mustang could be the best combo, but, they couldnt know that both would be choose...

@burntrubber5689

Жыл бұрын

@@ignacioalanis2330 and they still would have asked for these cars if they were started a month earlier.

@ignacioalanis2330

Жыл бұрын

@@burntrubber5689 but they dont define who they bring neither, thats all to last minute, all channels struggle with that, i don't really know the mentality or business idea of theses builds but all of them are nerves crashers for the owners

Good luck with the car guys it's looking killer!!

You guys are absolute legends and artists! every time you finish a build im like DAMN how can they top it, then boom another build. you should be so proud! Hands down the most unique and beautiful mustang i have ever seen, and i am a huge hoonicorn fan. Good Job Guys!!!!

That by far is the best looking Mustang I ever saw........... Nice ........

Chris you're nuts, and I love it. I hope the boys and you get to kick back and take it easy for a while.

Wow you guys did an amazing job.

The way you casually said that you replaced the wiring harness TWICE. Bro that's so much work, u guys are crazy haha

Amazing! Great job. It is so hard mentally to work those hours. Hang in there! Love the build!

Really cool to see this thing in person at SEMA. Great build!

That car looks so sick man! Can’t wait to see rolling shots of it!!

Mannnnnnnnn, I love you guys.... You guys did your thing with this "Mid-Engined '67 Mustang build"!!!!!! My family made it to SEMA, this year, and I've begged my best friend to come to the HOLLEY BOOTH to meet you guys and take pictures for me! #AWESOME!!!😎

Absolutely love this car!! Hope you get it sorted!

Everyone saying start building earlier but they did start releasing videos 7 months ago so have been on the project for a long time! I'm impressed how they have turned a rolling chassis into a crazy wide mid-engine Mustang!!!

Such an awesome build. Good luck guys.

The body lines are terrific. Some people always have to work with the crunch stress on them. No matter all good!

I've been working at a body shop for a bit now and extra tips I learned was if you're painting the door, it's better to take off the mirror and belt molding (the trim at the bottom of the window) for a better paint job in the end. The mirror can get in the way, and if you're unlucky, the clear coat could stick in that gap between the door and the belt molding

All the luck boys! its gorgeous!

Love the shift knob ‘jab’ keepin it real!

i like the yellow headlights, it kind of brings some homage to the oldschool base of the design, yes the blacked out front flows alot better but sometimes you have to make exeptions.

Don't sweat it guys it happens to everyone. I am confident that you will figure it out in time. You all just made an amazing feat of engineering and created an awesome car. Can't wait to see it run.

You Gentlemen have done the world right with this living rendering! It is very visually appealing and Ford should see this!!! Minus the awesome LS.

Brutal. Good luck yall.

Hell Yeahhhh Was waiting for this all Day Thankss

great work guys! the car looks amazing 😍

You guys looked absolutely exhausted, im surprised you were able to troubleshoot the no-start as much as you did. Hopefully after a sleep, a refreshed brain will help with diagnosing it when you get it unloaded at SEMA and can focus on it!

Amazing stuff guys!

you gotta love that makeshift paintertape bandage on his finger! When you know ya know. CARGUY 101: in case of emergency - water, Uline hvy duty wipes, painters tape and keep on DIYing.