Go to partners.connecteam.com/carsandcameras to make the most of your business today! Brought to you by Connecteam.

@RockenTravis

18 күн бұрын

Now to get a cheap temu turbo for ir

@dbomber69

18 күн бұрын

It needs bigger rear tires. Diesel has the torque needed to rotate a larger wheel.

@axialpad99

18 күн бұрын

@@dbomber69 Agreed, they could get more speed out of that thing for sure

@jasonkaelin2337

18 күн бұрын

Sorry if I missed some episodes but what happened to Charles??

@bodine2537

18 күн бұрын

@@jasonkaelin2337he’s still there every once in a while but not every episode anymore right now, think he had to move back closer to his parents for a new job an it’s too far to drive back an make episodes every week , haven’t seen him in bout a month or so though as of right now but he left the every week show about 6 months ago

The reason it finally ran is because you cracked the line open, its extremely hard for single cylinder diesel engines to bleed themselves.

@dozer8065

18 күн бұрын

agreed, and maybe the fuel that was in it was a type of "shipping" super low quality just used to lubricate for shipping purposes, draining the fuel, changing fuel, and popping that line got all the good fuel in and bled the system.

@StroDshiesty1

18 күн бұрын

@@dozer8065exactly i feel like it was oil to keep it from rusting during storage/shipping

@cs-gj3yf

18 күн бұрын

@@StroDshiesty1 theres nothing to rust, especially the injection pump parts its all extremely high grade stainless, almost indestructible, its just lube for the tight tolerance stuff, keep in mind the plungers inside that pump have tolerances that are less than a thousanths of a inch

@masjuggalo

18 күн бұрын

But I assume they mostly bleed like old mechanical injected truck diesels (pickup trucks) like when someone runs their 12 valve out of fuel just there's only one cylinder so there's no hope of one of six getting some fuel and making the engine spin over on its own

@masjuggalo

18 күн бұрын

​@@dozer8065to be fair, diesel fuel is probably the lowest quality stuff you really can get for an engine designed to run on peanut oil

Lol it needs a little tractor exhaust flapper

@ghomerhust

18 күн бұрын

THIS

@IndianaDipper194

18 күн бұрын

PLEASEEE 🤣🤣

@christianfolkner

17 күн бұрын

like the first one!

@qoph1988

16 күн бұрын

Incredibly important. I wish I had a diesel dirt bike with the exhaust flapper thingy

@wewya.

16 күн бұрын

or make a mock big rig exhaust

The moment you put a turbo to this gokart its gonna be everyones east european dream gokart, just imagine "The TDI Gokart" lmao. 😂🙌

@WyFoster

15 күн бұрын

It's going to happen. Parts are on the way

@Basedforlyfe

9 күн бұрын

😂

@felikswielkopolan4001

Күн бұрын

prawda!

When it comes to diesel engines, it ain't the horses, it's the torque that sends it, even with that swiss cheese flywheel... :P

@grannysgushinggash

14 күн бұрын

yes there's no horses in a diesel engine it contains pistons

@jacobkennedy6820

11 күн бұрын

@@grannysgushinggash i dont think you could even fit an entire horse in an engine.

@sabero5668

11 күн бұрын

@@jacobkennedy6820 Then you don't have a big enough engine. Or a small enough horse I guess

@bustinnucks1299

9 күн бұрын

Torque In motion is horsepower. What your feeling is horsepower being made sooner.

@grannysgushinggash

8 күн бұрын

@@jacobkennedy6820 you can if you mince it first

Diagnosing a brand new engine like they found it in a junk yard is hilarious

@bradkenyon1643

18 күн бұрын

True but that's temu. Could be wish😢

@bradkenyon1643

18 күн бұрын

Is wish still a thing?

@tommylucatiel7911

18 күн бұрын

They are the same thing ​@@bradkenyon1643

@crunchyfrog555

17 күн бұрын

Sign of Chinese cha bu duo construction. Sadly very typical.

@Halfstep2024

16 күн бұрын

One man’s communist utopia is another man’s junkyard I guess 😂

Love how my starter box can start a 420cc diesel but struggles with a small block Tillotson methanol engine 😂

@z1berzerker

18 күн бұрын

Its fighting the spark advance, not the compression 🤔😉... Tilly Meth builds are Bad A55 🎉🎉

@RobertJeffersonBased

18 күн бұрын

@@z1berzerker Electronic ignition would be a great upgrades for a lot of minibikes

@justinarseneau4450

18 күн бұрын

Whats the difference ? Arent they already electric ignition?​@@RobertJeffersonBased

@marzsit9833

18 күн бұрын

@@justinarseneau4450 the difference is that spark timing on a small engine with a magneto is fixed, with no advance or retard possible while the engine is running. a battery powered coil ignition system can have adjustable advance, just like car engines have.

@justinarseneau4450

18 күн бұрын

@@marzsit9833 oh ok thanks for the info

Ive had 4 of those. Remove some of the shims between the little injection pump and the block. It'll give it a few more hp and more smoke.

@Failure_Is_An_Option

13 күн бұрын

For zero benefit.

@proxyhx2075

13 күн бұрын

​@@Failure_Is_An_Option Are you literate?

@davidanderson7720

11 күн бұрын

@@Failure_Is_An_Optiondiesels work different than gas engines. More fuel=more power😂

@juliogonzo2718

10 күн бұрын

​@@proxyhx2075it'll blow up if you mess with the timing too much, and definitely will shorten it's life running it advanced more than stock

@killzone9810

9 күн бұрын

Are you stupid?!​@@Failure_Is_An_Option

Also, dont piss all your money away on brake clean. Buy a gallon of acetone for 20$. Get a squirt bottle and blast it off with compressed air. 8-11 cans of brake clean in a gallon.

@WyFoster

18 күн бұрын

And it's the same stuff lol

@michaelince910

17 сағат бұрын

Thanks for the information!

“This thing is junk…..HEY WE HAVEN’T EVEN HEARD IT START YET…….Exactly” 😂😂❤ love you guys

This build needs a custom homemade transmotion like a 3 speed trans "crawlin, crusin, racin". Yall could do it for sure 😂🤟

@zAvAvAz

12 күн бұрын

Yeah imagine an even gear spread for 90 mph!

@sabero5668

11 күн бұрын

@@zAvAvAz With a turbo, more fuel and proper gearing for it, maybe it could get there. More importantly, would you want to ride that cart at 90mph? Answering "yes" could win you the "Biggest Balls Of 2024" award.

@marco3392

4 күн бұрын

@@sabero5668more likely a Darwin award lmao

Diesels are all about the torque. The weight holds you into the curve, and the torque pulls you out. I concur; probably not a great track machine, but perfect for that Grand Prix woods course!

Bruh that got me so good I was like holy moly she booking it then at the bottom of the screen “She made me play the footage back at 2x speed to make it look fast”. Yall are so cute it warms my heart

Now, For Some Free Mods!!! - advance injector timing a few degrees by removing 1 or 2 shims under the unit pump , turn fuel up also easy since its just an adjustment no parts swap, an ditch that stock air filter for somthing bigger and more free flowing that I'm sure you have layin around the shop, Then Bam MOARRRR POWAHH!!! And yes Turbo would be a good addition , makes it easier since that engine has a pressurized oiling system too

@DarkAttack14

16 күн бұрын

Turning up fuel without adding air is a bad plan... EGTs up for minimal power increase. Advancing the timing would be a good plan though.. He already has smoke so more fuel is not going to do much

@servicetrucker5564

15 күн бұрын

@@DarkAttack14 High EGTs on a NA diesel aren’t a problem. The old trucks with 200 hp had flames coming out the stacks and manifolds glowing

@TestECull

14 күн бұрын

@@DarkAttack14 Being able to easily turn up the fuel like that is going to be the difference between the turbo simply cleaning the exhaust up and the turbo actually making the engine more powerful. If they want any gains from the turbo they need to be able to turn the fuel up. As long as they don't mess with the governed speed setting it should wake up pretty good with some boost.

@zocka64

14 күн бұрын

@@DarkAttack14 On an NA diesel its tested to get more Power at Rich Mixture(even under Lambda 1/aka really smokey), since you are air limited, EGTs also arent a Problem und NA conditions. Adding air through a turbo would be the best addition for the extra fuel tho

@Failure_Is_An_Option

13 күн бұрын

Timing advance may be of a very slight advantage. Increased fuel... pissin in the wind. Air filter... pissin in the wind.

Your girl did awesome! Re watch the video and watch how she relaxed her brake foot. She had it flat out on the gas pedal. Glad to see you two enjoy go karts. Next she has to help build her own.

No one talking about how the Diesel engine sounds like a lions roar when he lets off the gas at 1:10:48 Love the sound lol

I have this same engine I cobbled on to an ariens 28 inch snow blower frame. The power output is super good. I've put it in to foot deep wet heavy slush and it loved it. It was barely even taking a load and it was LAUNCHING that stuff.

Yall need to have a hot lap day where you re-run all the board leaders!! That would be an awesome episode!!! Cheers guys and love the vids!!!

Now this is a sweet platform!

@Jockymcbock

18 күн бұрын

Was just looking at some diesel engines! Excited!

@mathieulachance151

18 күн бұрын

Absolutely!!

@mathieulachance151

18 күн бұрын

It reminds me of the small diesel powered go kart you guys built a while ago with the engine from EBay !! Loved that video

@DuDieselDude

18 күн бұрын

@@mathieulachance151lol they said that in the video

@wyattflanders8459

18 күн бұрын

Now it’s time to super or turbo charge it

If I was building a diesel kart I would definitely go with a torque converter. Keeping the rpms in the peak power curve. I'd probably gear on the high side so when the converter went to full lock up my final drive would be set for top end. I'd want the engine to top out at the end of the longest straight away.

I was cracking up at around 1:12:30. John looked like he was on another planet or something 🤣

She dont need to be shy, we are here to support and enjoy go carts, mini bikes etc. Its issac we're here to judge and talk about... Them sideburnz... Lol Love em. 😄

@user-bb5lm8sg8w

6 күн бұрын

And let not get started on his poocha shell necklace,

John going to his roots with the music during the painting montage.

Can’t believe you got the original Goose from top gun to help out

I was a TIG welder for 3 years... it is so much better than MIG... it just takes some reps to learn how much heat to use and building muscle memory with adding the rod... and you can weld any material with TIG. I was primarily an aluminum welder and TIG is the way to go... anyway enjoy... in a few months you will have the hang of it.

I almost feel like I'm watching an episode of Diesel Creek....lol

@aronfaine9457

16 күн бұрын

Matt would be stoked to see this lmao

Ya'll need a set of holes on that bench to bolt down engines. Tapped so no reaching your hand under the table.

@drinkmorecocacola

18 күн бұрын

A “universal” plate to mount on would be a cool upgrade to the shop. I LOVE upgrade videos

@dickkallerhan2412

16 күн бұрын

one would be a start 😆

@alexmikhael5061

16 күн бұрын

I was thinkin a c clamp kinda thing with X pattern for the 4 bolts, and the clamp fastns down on the ''table'' or into a vise even but ''designed'' to set into the jig table thingie and watnot ;)

@freedomisntfree_44

15 күн бұрын

Good idea 🤙

the small hex plug on the bottom right of the side cover is an oil feed. the exhaust flange is close enough to a predator 420 that an off the shelf flange fits. i turboed mine with a vz21.

@K-Rivs

13 күн бұрын

Where'd you buy the motor from?

I've heard some of these engines have sat in a dirt turner for over 6 years, with little to non maintenance at all, still starts and runs like a champ

So happy to see home much you guys have grown the channel over the years!! Keep up the great work!

Lol. I have that same motor on a mini bike. With 40 converter. I call it the D-69 cat lol. It's all done up to look like a cat machine.

@bicbuilds

18 күн бұрын

i need to see this

@humpday2267

18 күн бұрын

We wanna see this sounds like a cool build man

The mix of colors reminds me of the Partridge Family bus from the 70s. Need a flipper on the exhaust pipe. John it was nice of you to introduce your girlfriend. You two make a great couple.

Pin this please! Blue locktite comes in a tube/glue stick/paste. If you have any little ones, glove them up and have them apply it to all the bolts in the kit. If you don't have little ones, the paste still makes it easy and less messy. I haven't built one of these carts but harbor freight trailers are built with nuts and bolts, that's exactly what I did with my son, we poured outs all the hardware, put blue locktite on it and sorted them, it was a great first step in the project and it's a good first "wrenching" project with my son.

Id say going 1-2 teeth bigger on the clutch would improve the top speed by a lot. 1 tooth on the clutch makes up for 8 teeth on the rear. A Turbo and a good porting job would improve the hp and torque by alot.

@aidanlyons1155

18 күн бұрын

how many teeth on that clutch sprocket, did you manage to see by chance?

@T3NNESSEE

18 күн бұрын

@@aidanlyons1155 Just taking a guess id say 14-15 if its a 1 inch shaft engine.

@therealracer135

16 күн бұрын

I mean, they did say it's already sketchy enough in the corners, adding speed probably isn't going to help much, at least not on their track.

@lifehealth489

14 күн бұрын

@@aidanlyons1155 bobby dont miss anything

Ah, you fell for the ol' flywheel scam. Happens to the best of us.

Temu.. Giving the Chinese continuous American comedy since 2022

diesel has a forever shelf life

@juliogonzo2718

10 күн бұрын

They've mandated summer fuel where I am to be B5 biodiesel now. It's more prone to bacterial growth imo. My old job had a truck sit for about a year and the fuel went bad. Another truck sat for 3 years and it didn't because it was before they put that crap in the fuel.

@waxore1142

9 күн бұрын

@@juliogonzo2718 you can drain it and run it through a hard filter and remove just about anything

@DeltaOGaming

9 күн бұрын

@@juliogonzo2718biodiesel is sh**

Love the long form videos! We asked, you delivered thanks from all of us detail orientated fans

@goosenotmaverick1156

17 күн бұрын

I have a hard time finding enough time to sit down and watch an entire movie though. Personally I liked the 30 ish minute range, longer than 15-20, but not nearing feature film length

This was such an enjoyable episode to watch. It had everything in it. Some build, some fix, some vlog, redheads, and you had fun most of the time 😅

These long form videos are impeccable 👌 I love having you dude on in my workshop. Great job on the diesel boys!

Before things get crazy with mods, I'd love to see a little torch shooting propane into the intake via "nitrous" button.

@WyFoster

18 күн бұрын

You're speaking my language brother

@lamarzimmermanmennonitefar5269

18 күн бұрын

That would actually help.

@gorillaau

18 күн бұрын

​@@lamarzimmermanmennonitefar5269It's not goimg to hurt anything of value.

@cs-gj3yf

18 күн бұрын

nobody uses propane for a reason, nitrous is better.

@jasonbirch1182

18 күн бұрын

​@@cs-gj3yfwrong. Nitrous is extra air, propane is fuel. A diesel makes power with timed fuel injection and the correct amount of air. If it's making black smoke then you need more are, if it's not you need more fuel. Adding nitrous to a diesel making no black smoke is going to get you little/nothing. Adding propane is untimed fuel for when you can't get any more from the injection pump. It helps spool the turbo earlier too. I have a propane Injection system I built on my diesel Mercedes I tow with.

Worst tig weld is the one you didnt try. I was blessed to have my entire apprenticeship in tig doing stainless food and beverage equipment 29 years ago. MIG = Monkey Ignorant Gun. Any monkey can do it, and some do it well, but tig is an art.

@bigpipol

17 күн бұрын

amen ma man

@derrickmanning2597

14 күн бұрын

Over here in UK us stick welders call migs hot glue guns! I've done thin sheet and even motorcycle headers with stick,done heavy work too (RSJ'S)and cast iron! most of that is an art as well!

You guys will love the arccaptain welder. I've been running mine since the beginning of the year on aluminum, SS, steel, and bronze filler and it is a very capable machine! Hint, you guys really need to get the foot pedal, the control it gives you makes the difference between mediocre and great looking welds especially on thin material!

Y’all should get a flywheel from an L100 Yanmar because they are the same exact engine.

yeah, good to get a tig! you guys need one, and when you are good at it you can take the tig home and do welding at the tv room table. So much less dramatic with splatter and stuff then a mig!

Once you git the hang of it, TIG Welding is awesome, I actually prefer TIG over MIG for certain jobs where the join will be visible.

Friends don't let friends TEMU... you're just asking for it.

Uh, did they know about depressure knob?(the little red knob thingy, top of the cylinder head, beside the injector. No wonder the starter are just shredded to pieces 😂😂😂

@lensrc7460

18 күн бұрын

yes, they knew about it

@nihildegrasse1700

18 күн бұрын

@@lensrc7460 I think they should use the knob to disable the compression, thus make it easier to gain more rotation momentum. After enough momentum gained, just let go of the knob and the engine will do the rest. That's how we start some Chinese diesel engine here. Those Chinese really go low with that starter tho.

@lensrc7460

18 күн бұрын

@@nihildegrasse1700 They were. Watch again. They even talked about it.

@GuitarRek_Films

17 күн бұрын

@@nihildegrasse1700they did the starter was just that shitty that it still broke

i would love to see you put a turbo or even a supercharger on this machine

Loads of torque I bet

I love TIG welding... can be so satisfying once the learning curve realy hits

Love the color scheme on the Bolt Go-Kart.

Rolling coal patrol!! 🔥 💨

I apsolutly died of laughter when I saw the comment about doubling her playback speed

Thanks guys for doing this experiment, I’ve been wanting to do something like this with a couple buddies, but from what I’ve gathered they’re better as a boat anchor than an actual useable engine

Can we get a camouflage short sponsorship???

Lol looks like the Will Smith's jacket in the Prince of Bel-Air

@Bama3728

18 күн бұрын

Or the Partridge Family bus.

Your buddy needs to be part of the channel. He's already super comfortable with the camera 🙂

@bicbuilds

18 күн бұрын

He has his own channel thats why hes so comfortable lol

@g0ldensample21

18 күн бұрын

@@bicbuilds 🤣👍. I did not know that. I'll have to go check him out. What's his channel name?

@jumpercabledadz

18 күн бұрын

@@g0ldensample21JumperCableDadz

Diesel gate is a really good name for it 😂

Epic paint-job on that bolt-cart! 👍👍👍

Ya know, your other diesel from YEARS ago came with a broken flywheel as well! Had a single fin broken off!

Wheres Charles? Ima ask this on every video until I get a answer.lol

@CLPRPSD

18 күн бұрын

Search “ Did Charles from Cars and cameras leave”. I believe there is a video of a podcast with announcement?

@scubasteve3293

18 күн бұрын

I'm doing the same thing. I feel like there was a fall out.

@CLPRPSD

18 күн бұрын

@@scubasteve3293 it seems that it’s time for change. Hoonigan iis now crap after it imploded due to corporate nonsense, Donut media has everyone jumping ship, Grindhard Plumbing lost a guy and now this. Change happens, sometimes it’s for the best, but not always

@scubasteve3293

18 күн бұрын

There is i just found it, I'm glad he left on a good note, I'm going to miss that guy.

@ne634

18 күн бұрын

Yep I found it.. didn't know they have a podcast

Tig is a lot like gas welding. I love Tig.

Ive never watched an hr long youtube video beforee this was quite entertaining,learned alot too .

Quit lying you didn’t pay $3500 for that motor you using

@TheCowboyfromhell87

18 күн бұрын

They said $415. What are you on about?

@shaynegadsden

18 күн бұрын

Yep 0:50 $415 so no idea where you got $3500 from

@JoshKilen

14 күн бұрын

@@shaynegadsden they are a chinese clone of a yanmar. the Yanmars are $3500

@shaynegadsden

14 күн бұрын

@@JoshKilen even if true i'll assume you are what does that have to do with anything. They know nothing about the motor explained how they picked it and what the price was so still $3500 wasn't mentioned and sounds like OP didn't pay attention and just made up their own backstory

Fun stuff guys. Congrats to BBR for the design.

I bought this same engine for my snow blower and it works really good. I dealt with some small issues finding the right belt size but once I got that dialed in it’s strong as a bull!

Guy's the Diesel go-cart is an Awesome build & i Look forward to you guys adding a Turbo to the build !!! I Really think it would be an Amazing project because it would open up possibilities for folks like myself as I have several diesel small engines that I have acquired from auctions & trades over the past few years !! I build go cart's, buggy's, Side by sides etc..... & have been looking for a Tried/Tested & True setup for a Turbo Diesel small engine combo that's solid & not a "Break the Bank" investment !!!!! I Simply LOVE your Videos & how you guy's are able to include all of the content that makes my builds so much Easier as well as much more inexpensive !! PLEASE keep the builds coming as I watch Every Video you guys post atleast a half dozen times per video as a reference or to introduce friends & Family to your informative & just Downright Wholesome HILLARIOUS "Spot On" Builds !!!! Love you Guy's!!

I didn't know Will Ferrell built go-carts! Go Ricky Bobby! "If you're not first you're last"!

Gotta love this idea brought back to the chopping block after a couple of years, it was one of my favourites from y'all.

just to recap; diesel generator, mounted on a 'put-it-together' go-kart is awsome! and that's cutting it short still haha that thing is a monster!

I remember watchin' yall back when you started your channel glad to see you're doing well!

tell ya what, this was in my feed, and it was right up my alley. great content, great shop, great personalities. makes me wish i had friends lol! well ones that were into this kinda fun. see ya on future videos ill be watching.

Just wanna mention this video was so good i didnt notice it was longer than an hour. Been watching since 6 pm and now its 12 (was doing stuff in-between but never changed videos)

Yall need a video restoring all the old builds

now i see this coloured frame , it reminds me of the Technics Toy kits from the '90's . The plastic parts clicking together making all kind of structures and vehicle's

I never thought that there would ever be a diesel small engine but they’ve been around for YEARS! It’s crazy how far technology has come in just the last ten or twenty years.

You guys have so many shifter Karts and go karts I would love to be in the same place as you guys in a few years from now. Also this video gives me old cars and cameras vibes I love it ♥. Keep it up

I think it should be named the “Rainbolt cart”!

Please do much more content with this setup. It is so awesome. ❤

Isaac is the man he makes this channel

If you're gonna get in a bolt together cart, you should invest in nord lock washers to prevent vibrations loosening bolts

This is the stuff I love. You guys, a little kart, and a handful of bad ideas.

Quin(n) is adorable!! That little bit of shy I'm sure is not a reflection of her true personality. Looking forward to the day when she's confident enough to rip the Drag Rail down the track!

I might buy one of the kits just to see what it looks like sanded and polished to a mirror shine. That’s all I could think about while looking at those parts 😂

so john's house is like ancient brittania. short roman dude, tall red head lass.

Man, that thing is surprisingly rowdy, can't wait to see it tuned and turbo'd!

Love the Harlequin VW theme, you should nickname it Diesel Gate-Kart😂

I think Blackstar really hit the nail on the head with the fly 3 series amplifier. ( I have the combo extension cabinet (fly103). After using my 6 Watt setup for 5 yrs. This is to be delivered to my door by Saturday. I'm very excited and proud to make it my new practice amp(5 watt mode!!) I'm 46 and this amp is for way more than beginners.

I love yard carts! Nice effort fellas!!🎉

As soon as I saw the rainbow colored go kart I though,"Ike and John are finally coming out in this episode" 😂 Never figured it was the partridge family go kart...

With all those different colors it looks like a partridge family go cart.

This is brilliant episode. Not so rushed. Arsome stuff.

Disabled the governor so the throttle links to the rack / element, what ever the governor is linked to so it can rev. They actually tolerate high rpm, you can watch video of people trying to blow them up with locked governors and no load! They often will just rev to 1-2000 rpm faster and stay there, rpm being limited by injection timing and volumetric efficiency like a petrol engine. If you could find another fuel pump from a 600-900cc engine with no governor, ( you need a bigger element)you could add boost/ air. Fitting a turbo to standard pump Will just make heat!

Very nice 1st weld! Go Kart content AND a welding lesson! Nice!

New cart, no long pants, no long sleeves, no gloves. You guys are nuts ! 😲 Nice video. The diesel gives you a ton of torque.

*"I SURVIVED BUILD WEEK."* haha Nice Shirt!

Dude, for the VERY FIRST tig you’ve ever done on that pipe, it looks damn good!

BBR really went over the top with that kit! Impressive!! You guys are awesome for building their kit on your channel

Yeah this 100% turned out better than I thought it would based on the description and explanation lol. I love the exhaust