We Bought Another Screener and it Flipped Over on the Way Home
Автокөліктер мен көлік құралдары
Adventure Drives Trip Giveaway Link www.superspeeders.com/store
Another company I started trying to minimize headaches definitely has had its fair share so far, but I love problem solving, so we are making it better as we go! www.superscreenersnj.com
Come Drive With Us
www.adventuredrives.com
Amazon store with products I use.
www.amazon.com/shop/superspee...
I will never ask anyone to contact me via any method other than email in the comments. ANY TELEGRAM OR SIMILAR COMMENTS ARE SPAM.
Пікірлер: 183
That's strange! Like who would think a tall narrow trailer with 90% of the weight up top would just flip over like that in a turn?
@Deletirium
Ай бұрын
Right? Feels like a pair of stabilizer bars welded to the sides, slightly offset from the road height, with maybe some springloaded casters or something would help.
@billsmith281
Ай бұрын
It's a real brain scratcher😂😂
@rustymustard7798
Ай бұрын
@@billsmith281 It's one of the great mysteries of the universe, we may never know why it happens.
You should start putting your logos upside down now… might work out better for publicity. 😂😂😂
@JeungFats
Ай бұрын
🤦♂🤦♂🤦♂
@MrRedtaco11
Ай бұрын
Especially at off-road events.
He forgot to flick the straps and say, "That ain't going anywhere" 😂
We trailer all of our screeners on low boy trailers. They are not set up or designed the same as a normal trailer.
New intro threw me off there for a minute
I ran a soil company for many years including screening and anything to do with soil, inert and contaminated etc. My advice is pump your profits into a good 2 way trommel to start with. Something with a hopper and a feed in and feed out belt. Yes they are more complex but they can process soil so much faster. There will be some R&M but your returns will be significantly higher. If you can afford something with an interchangeable drum thats even better. 2-3 inch and a 1 inch drum will do most jobs. Once you have that up and running then a 3 way is your next step. Big bucks though. Bigger not always better though. Some of the smaller self propelled units are pretty damn good these days. As for your screeners you have now, keep a good stock of mesh on hand and keep the engines in good order and you should be ok. Just keep that welder warmed up!! Best of luck.
At a glance, it seems that it wouldn't take much to make that axle a proper width for a trailer. As it is now, it doesn't really seem like it was designed for road use.
you sure those are actually intended to be towed on the road? and not transported on a trailer then towed around site?
@Pwnulolumad
Ай бұрын
You would expect rob as a car guy to upgrade to wider tires…. It technically has a license plate so maybe the machine is itself classified as the trailer.
@AHomelessDorito
Ай бұрын
It can be legally towed on the road all day just like any heavy construction trailers you have to be slow and careful and you won’t have any problems. It’s pretty obvious whoever was pulling the screener wasn’t being careful and took the turn too fast.
@chriscuster5721
Ай бұрын
Obviously the wheelbase is way too narrow for a machine that tall and top heavy . I'd widen wheelbase as much as you can with wide tires .
@MelodyOo
25 күн бұрын
That's exactly what I suspected.. most machinety that are diesnged to be towed are designed to be folded and such for ease and safety of transport.
Paint the blocking plates and the area where they sit as a different color, like yellow. Then it will be easy for people to know where they're meant to go 👍 And maybe put a marking on them "required for transport"
time to transport on a trailer & roll off at site
The “wiggers” sign in the background is pure gold 😂😂
@GodzillaSVTMACH1
Ай бұрын
Yeah I was dying 🤣
I'm ready to start my own screener rental now, thanks!
That machine is 100% boutique made. That number on the front is probably my whole made it. Stuff like that is like mining equipment, made kinda per spec that you want.
@VC-Toronto
Ай бұрын
Might be a "VIN" assigned by the DMV for a "home-made" trailer.
That skinny axle looks more designed to be moved around a job site more often than around roads. I’d put a much wider axle on it.
While you are driving, it probably started to experience harmonic vibration and the shaking got progressively stronger. It's akin to a 4WD with a failing dampener shock and every time you would hit a bump the front end would shake and get more violent until you hit the brakes and slowed down a bit. Only for it to happen on the next bump.
Should take about a day for the welded on hooks and D rings to snap off.
@cornhoolio6456
Ай бұрын
those were some rough welds
@paradiseprod6153
Ай бұрын
@@cornhoolio6456 dont think they even tried to prep, just brought out the stick said we can get it done in 5 min
Deutz is a huge industrial engine maker. They have massive stock of parts throughout Europe (like Caterpillar does but not quite the same scale). It can't be hard to find spares.
Perhaps your guy "who moves heavy machinery every day" just isn't as good at it as you seem to think he is... A narrow top heavy trailer is basically designed to flip and should be taken into account when making a turn. Its carelessness plain and simple.
@Segphalt
Ай бұрын
Also the idea that nothing can go wrong with a machine that just vibrates is absolutely laughable. Vibration causes damage and maintenance more than basically any other kind of wear because it affects the whole machine. Screws back out, things crack etc. When you also have people turning them over 2x a year who even knows... It's a good business model because you can charge 3-5% of the cost of the machine to rent it for a single day. So when one does break it has often paid for itself several times over.
That orange screener I doubt was factory made either small shop made or was home made and is a little narrow for the height you'll have issues with it normally axles are same width but they didn't make it wide enough I'd suggest making the axle wider it'll save alot of headaches lol
Try to call hennigers diesel in Sudbury Ontario, they deal lots in those deutz engines, lots here that are in the mines...
Today Mr Spaghetti buys another pasta strainer and it doesn't go as expected...
@sirNemanjapro
Ай бұрын
TOP COMMENT
@Bird_Brain_Dave
Ай бұрын
Word
@VaporheadATC
Ай бұрын
LAME! Stop with these stupid comments about spaghetti.
@joe_pelensky
Ай бұрын
@@VaporheadATC lol MR. Spaghettio takes offense to his mentor
@nissanzenkiboy
Ай бұрын
@@VaporheadATChow dare you disrespect his pasta 🍝
Also these are not meant to be towed on the roads but transported off of a tractor trailer and moved around on the job site on those wheels. They originally don’t come with DOT tires at least I haven’t seen one like this meant for road use. But it’s possible previous owner registered it as a custom trailer
New SuperScreeners intro! Here for it!
I don't know what your weight or width limits are there, but it will help if you can put a wider axle on it and weld a heap of heavy steel plate a low as possible to make it less top heavy.
Awesome, happy to see the intro got a nice update!
Very high center of gravity in conjunction with short axle.
Be careful welding hooks and D rings to things you are renting out. When they fail they can kill people or do some serious damage. They look to be ok to me but just keep that in mind, construction crews and machines will put a lot of stress on them hooks and D rings. Maybe put a disclaimer sticker or capacity sticker on it to protect yourself. I’m a union ironworker and a welder by trade and just wanted to say I’ve seen some crazy failures, you really don’t want a weld failing on any of those D rings or hooks ! Good luck with the business!
As soon as you send unique German engine I knew it was an air cooled Deutz.
Always enjoy your content. I did notice the intro, like the old one. I also know how to fast-forward, no worries.
I'm going to create a screaner delivery business 🤣
This is the most random channel I have ever seen
It needs duals to be remotely stable cornering on roads. At least it didn't flip onto a smaller car or hurt anyone. It would be wise to put DANGER/Risk of flipping labels on a couple of spots alerting inexperienced customers about the serious risk of it flipping. If someone was seriously hurt or worse lawyers will point at the guy who was aware of the risk but did not alert customers. Rob.
Very easy fix , Just Ratchet strap the screener , ( North ,South,East and west)stop the shaking , , , No easy movement ! HAPPY DAY`S MY FRIEND ............... : )
Seems like some significant liability to knowingly tow these things around when they're so easily rolled over. Maybe modify to expand the track width by a foot ?
Hey Rob, you should probably use one of your car transport flat decks to move that around.
Come on Rob bring back the old intro!!! Its classic but we love it.
Mr. Ferretti's screener went flippetti!
Brackets that you bolt together in both directions on all 4 corners to make the top absolutely unmovable is the way to go, especially if 3rd parties are going to move it around. Sure, it will take an extra 15 minutes to set up or stabilize before hitting the road, but that top part being rock solid is the only way it's going to be safe on the road. I'm 54 years old, if that was me, I know to drive 200% more careful, half the speed and just get it there safely but you're not going to get that level of caution out of a 20something or hired hand who is not directly on the hook for any damage. Think about it- some kind of bolted brace for each of the 4 corners, you can bolt and unbolt with a Dewalt imact on a battery.👍
It's top heavy, you cant change physics, all you can do is slow down during any type of turn, no matter the angle
Woah that intro was nostalgia
I like the intro. Nice.
“Babe wake up, Rob flipped another screener”
im sure those booger welds will hold just fine
New intro, interesting !
Meatballs getting tossed like a teenager 🤣
you weren't supposed to tow this, it's top heavy.put it on a trailer
Lengthen the toungue and put an axle up front. Make them as wide as possible with wide tires. Its way too tall and topheavy .
Yeah it looks very top heavy
Super Screener Rob
Liability on wheels! Great business!!!
Good thing no one got hurt. Would it be hard to place wheels further a part. Or use wider low profile tires. So there’s no bounce?
you should expand and buy more equipment and rent that out
I think they aren't designed to be trailered in the roads but only on site.... I think they need to be shipped on flatbeds. I am not an expert.. but the design of it doesn't look very road friendly at all. doesn't even have proper light set up or a "Trailer mode" like unfold etc
So which company ends up making the most? The luggage or screeners? Rob, you're the definition of an entrepreneur.
rob tomorrow: "the screener I bought turned out as having been stolen, so what I was told to do by my friend was to flip it - but I didn't quite get what flip it means."
Looks top heavy
Bro needs a widebody kit for the dirtjiggler. Only one question, Rocket Bunny or Liberty Walk?
@MrInternFTL
Ай бұрын
I think sand bags would suffice
I don't see the problem. That should buff out just fine! 😂😂
All the weight at the top but also very biased ot one side. Thats bad but the wheels being right at the back really don't help because as soon as it gets one wheel off the floor all the weight is loading up on the hitch. Then the rear of the truck dips and allows the weight to transfer even more. Thats why its catching drivers out - it seems fine until there's no way to catch it. Really it needs ballast weights low down for transport. That or a wider axle. Or another axle in the middle. Or all of the above. I'm also not sure its meant to be road towed. If there's no plate its unlikely to be designed for road towing because you need weight (and depending on vehicle balance) info legally in a lot of places so any pro company (and it looks like its pro made) is going to plate it if its intended to be road towed. The pintle is also a bit of a giveaway that its more for use on farms or on site because for road pulling they would typically use a ball unless it was built for the military - but if it was they would certainly have it plated.
The axle and tires are small too bad its not a dully.
Suggesting a used equipment trailer with a winch and plenty of tie down points.
You should solve the width of the wheel base before you do anything. Very narrow width for a top heavy trailer. Should be as wide as the tow vehicle
Finally a new intro!
no way, I was just thinking about the screener
equipment rental is BIG money. I'm in the industry.
That’s a Husqvarna 4000
Boys, we've been over this. Rob does everything the cheapest way possible then has to spend even more money to eventually do it right. This unit is designed to pulled on a trailer and has a hitch for moving around on the job site. Someone managed to work some loopholes and get this registered as a trailer so they could put a plate on it. It's no surprise that Rob is avoiding the expense of a trailer and playing dumb.
Thats a unit number like in a fleet of vehicles could of been from a municipality retired city or park equipment i work for the city and are units have letters indicating the location, yard and type of equipment and then the numbers are just consecutive of each other for instance in Charlotte WDY is a water department for W and Y means trailer SMY is street maintenance for the S and y means trailer
Throw a wider axle on the rear and at weight to the bottom to minimize the roll over risk.
Why wouldn’t the people using these just buy them? Anyone who owns a machine that could feed it should own one clearly. Mr Spaghetti is once again making bucks off of idiots; I respect it. This is why he’s rich.
It's getting to the point of cow tipping.
when its not running ..run it yourself sell the screened dirt ...look and see what those gold miners do to move tailends ..for the dirt ..it's top heavy fer sure ..get some chains ..lol..
@68hoffman
Ай бұрын
dualy's on the rear end
Two things, get a decent welder to put on your hooks and d rings. Those welds look horrible. At the same time, that is a simple machine. Any decent fabricator can make you a new machine using stock steel parts.
Ok, what’s “Wiggers”?
*Today rob spaghetti created a new intro but youtube hates intros and if you do have one it should be 3 seconds or less*
you would think your driver would be very careful around turns, knowing its top heavy.
Make the rear axle wider by a few feet!
the poofed up hairstyle doesnt cover up the bald well lol
I’ve got like 3 of them deutz engines laying around. Had no clue they are worth anything
It just where the grizzly bars footings go
Nice intro dad
Is it the pentel hook causing that?
Looks very top heavy
Who needs these screeners?
Today Mr spaghetti tells us how his fettuccine is so popular he had to get more however the cook dropped it and ruined everything.
I’d change the rear axle to something wider
Classic Rob
Why don't you put a Honda engine in the bigger screener? Just seems better overall for reliability even if you need to with a hydraulic power pack and a hydraulic vibrator unit
*Rob* *_The Jinx_* *Ferretti*
Is there alot of debris in the dirt to where people actually need to rent these??? I cant even think of a scenario where I would need something like this unless I was cleaning up a lot that was used for illegal dumping of trash.
make the wheelbase longer
They need a wider wheel base
Oh sure I suggest you see what it takes to flip over a screener and I get called a dummy. Then Tyler flips another one over without filming it just for fun. Whistlin' Diesel might rent yours if you don't film it soon.
It didn't flip.. you flipped it.. nice wording though 🤣🤘🏻
I think this is a ez screener is the company producing them at least it looks like from what u showed in the video it looks like their small 600 model I've used 1 years ago so I could and probably am wrong
What career field did your brother go into
Used to super cars down low hey. Stay away from heavy equipment.
Was that a NEW intro??! :)
Wider wheels and tires and adding weight as low and wide as possible
I like these video updates but the suitcase ones are the best. I can’t believe he’s still moving forward with that turd