I have learned much in such a short time with this presentation! Brilliant idea because now I want to see the whole class! Having bought another one previously , I know it will be simply... EXCEPTIONAL. Thank you .

@WoodAndShop

3 жыл бұрын

Thanks for the kind words!

@brycejaxon5815

2 жыл бұрын

I dont mean to be off topic but does anybody know of a way to get back into an Instagram account?? I was stupid forgot my account password. I love any assistance you can give me

@keagandominick8343

2 жыл бұрын

@Bryce Jaxon instablaster =)

@brycejaxon5815

2 жыл бұрын

@Keagan Dominick I really appreciate your reply. I got to the site through google and Im trying it out atm. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.

@brycejaxon5815

2 жыл бұрын

@Keagan Dominick it did the trick and I now got access to my account again. Im so happy! Thank you so much you really help me out :D

Excellent presentation, basic and simple. Thank you!

Thank You! Very inspiring and sparks a new journey that im excited to pursue!

Thank you for sharing your amazing woodworking knowledge!!!

Woah, didn't expect it to be so interesting and insightful, thanks for the great video!

Another interesting, informative, and thoughtful video. Thank you!

Very nice explanation. Always something to learn. Thanks

Thank you for putting this video together. Many people have traditional hand plane videos, but few on the molding planes. This was very informative! Much appreciated!

Have watched several of your videos and find lots of information that helps in my wood working journey. Thank you joe

@WoodAndShop

3 жыл бұрын

Glad they've been helpful Joe!

Nice video thanks, half the fun is finding these old moulding planes, with a history attached to them also. They are terrific value for money too. U.K.

Side beads are so much fun I’m always looking for an excuse to use them. Great video!

@WoodAndShop

3 жыл бұрын

Yes they are! Thanks!

Thanks for sharing your knowledge, great video

Very helpful. Thanks for sharing.

Bill Anderson has been an inspiration for many years. Thanks Joshua. My 3/16” boxed side bead plane is by far my favorite and most used molding plane.

@WoodAndShop

3 жыл бұрын

Nice Sam! Is your beader antique or new?

thanks for your time and info.

This was excellently presented Josh! I learned a lot and kept thinking about a set of moulding planes Ive seen near me. Thanks for making it clear and straightforward and even doing some demo. Cheers!

@WoodAndShop

3 жыл бұрын

Hey buddy, thanks! Where have you seen a set of molding planes?

@Thundermuffin93

3 жыл бұрын

@@WoodAndShop the Antique store next to Jacks Country Kitchen in Ruckersville has a whole crate of them upstairs in the back! Didn't know about how a set is made before this video, so didn't have the knowledge to understand the mess I was looking at. Might be worth a look?

@WoodAndShop

3 жыл бұрын

@@Thundermuffin93 Send me pictures, because most "crates" of molding planes are ones that are in bad condition.

Great video! Very informative. This certainly gave me some info and insights that will help me build more interesting furniture.

@WoodAndShop

3 жыл бұрын

Glad you liked it Michael!

That was just" Plane " awesome. Thank you for the explanations.I'm always looking for used ones that are affordable and this will help with my decision .

@WoodAndShop

3 жыл бұрын

Ha! You're welcome!

This was great info. Thank you!

@WoodAndShop

3 жыл бұрын

You're most welcome William!

Just got into molding planes this past year. I inherited about 30 of them that belonged to my great great uncle. Most are from the late 1800s. A few are from the early 1800s, and there is even one from Francis Nicholson who was the first plane maker in the colonies. It's from the early 1700s. Very nice. Still works great! I fixed it up and used it to make some baseboards for my child's room. Feels so cool to use something with that kind of history. Anyways, molding planes are awesome and I highly suggest trying them out if you can. I must admit, when I got them, I was a bit intimidated, but they aren't so hard to sharpen and use as they might seem. Just have to invest in a few slipstones and have some patience. So yeah, get yourself some molding planes. They're good fun. Much more satisfying than my router table.

@WoodAndShop

3 жыл бұрын

That's so exciting that you're getting into molding planes!

Very informative thank you

Very interesting, great information, well presented. Thank you.

@WoodAndShop

3 жыл бұрын

Thanks Phil!

Just in time! I have recently developed an obsessive interest in moulding planes and have gotten my first ones. For the moment I'm only playing with them and getting used to them, so thanks for this video!

@WoodAndShop

3 жыл бұрын

You're most welcome! If you're becoming obsessed, make sure you get Bill's video in our store.

Very informative video very useful and pleasure to watch 😎👍

@WoodAndShop

3 жыл бұрын

So glad you enjoyed it!

Thanks for sharing.

What an amazing video - thank you. I would be grateful if you could suggest how to workout how to identify particular molding plane profiles to enable one to buy dedicated molding planes to match restoration projects. I'm restoring my original 1890s timber sash window frames and I need to replace some deteriorated bottom rails. The window frames have a simple rebate/oval/rebate mold around the edge but I'm not sure how to go about finding a molding plane that matches so that I can fabricated replacement rails. Any suggestions would be very gratefully received. Thanks again and best wishes.

Fantastic video, Joshua! Thanks a lot! 😃 Sorry I could only watch it now... Because I was traveling. It was elections here in Brazil. 😊 Anyway, stay safe there with your family! 🖖😊

Very informative: Thanks!

@WoodAndShop

3 жыл бұрын

You're very welcome Thorn!

Mr jashua , thanks very much , I learned a lot from this video 👍 .

@WoodAndShop

3 жыл бұрын

You're very welcome, and thanks for watching!

lol, just pop down to my used molding plane store. 2yrs of looking at flea markets and garage sales i've never seen a single one.

Thank you so much sir !

@WoodAndShop

3 жыл бұрын

You're most welcome!

Very cool. The sharpening intimidates me as it seems like I can’t even get my bench planes as sharp as I’d like

@WoodAndShop

3 жыл бұрын

Bill's video on molding planes shows how to sharpen them. You can find it at store.woodandshop.com.

Great video. The only thing worth adding I would suggest, is that with certain types of moulding planes it can be easiest to start the cut near the far end of the board, and gradually extend the cut backwards as it deepens, rather than start at the near end as you would normally do when bench planing.

@ehisey

Жыл бұрын

Most but hollow and round would be this way.

Joshua I have been buying lots from ebay/auctions of vintage tools. I have a few tools, no one, knows what they are for? can you help us ID them. Thanks for sharing your knowledge with us, Deeman and friends.... OORAH!!

I've been a cabinetmaker for 46 years and have about 250 bench and molding planes. This is a very good video unlike most on the web. Thank you for making this. Oh, I love my # 45 and #55 . The #45 stays set up with a 1/4" straight iron for drawer bottoms in the side and front of a drawer.

@WoodAndShop

3 жыл бұрын

Thanks for the compliment Buddy! And now I know where all the plane went! Yes, I prefer the #45 with a 1/4" straight iron as well.

@ehisey

Жыл бұрын

Record 50 for me. My 45 is for everything else :)

Thanks so much for sharing all that information Joshua, much appreciated.

@WoodAndShop

3 жыл бұрын

You're welcome!

Interesting thank you

@WoodAndShop

3 жыл бұрын

You're most welcome John!

HeyJoshua, I built a workbench out of 1 1/2inch maple and the holdfast worked for a little bit and then they seemed to have gotten lose? And now they wont hold. Is the thickness a problem or is it something else? ,

Having issues with some of my moulding planes clogging at the cutter, not taking much off. Can it be wedge problem? Thanks

Do you use sliding dovetail planes?

Sir : a video on Saw Kerf and Frame saws....?

@WoodAndShop

3 жыл бұрын

Coming soon!

I agree ... a Stanley 45 ain’t easy to play with .

@WoodAndShop

3 жыл бұрын

Ha, ha. It works better for some things than for others. Good for grooves & beads, not so easy for moldings.

@ikust007

3 жыл бұрын

@@WoodAndShop even doing Tongues/grooves : not the best because of the possible errors when making the groove: the fence isn’t fix . Can be good but also very bad... I learned the rough way ...

@WoodAndShop

3 жыл бұрын

@@ikust007 Yeah, much harder to do tongue & groove joints with a combination plane.

@ikust007

3 жыл бұрын

@@WoodAndShop that’s when I learned : we don’t say groove & tongue ... the groove part can be fixed . Not the tongue chisel...:)

My house has beads on outside corner boards.

Gorgeous planes! I think that my wallet and I are not going to be on speaking terms after today! Flea Market here I come

@WoodAndShop

3 жыл бұрын

Yeah, my wallet and I are definitely not speaking.

With the latest “purges” I’d prefer to view you on something

Reslly like the video and information it contain. However, there was too many ads...

@WoodAndShop

3 жыл бұрын

Thanks! Hey, I removed about 4 ads that KZread automatically threw in there.

They had style and culture in times gone by. Progresvis a discrace sometimes

@WoodAndShop

3 жыл бұрын

That's for sure

This is truly an excellent demystifier. These beauties are a joy to use, but there is prior knowledge to be acquired before applying them to the wood. Having a complete set is like owning a leather-bound edition of the Encyclopaedia Brittanica- it's an heritage. This is a great video- very clear and concise. Just one small detail though: the word is spelt "MOULDING" and not "MOLDING". Mold is rot, whereas mould means "shape".

There's no reason to start with a square top surface. Rip an approximate angle on the table or hand saw, and then run a backer board along the inside of the plane to keep vertical. You've saved yourself at least 50% of the time removing excess material.

@WoodAndShop

3 жыл бұрын

Yeah, I often just hit the board with a jack plane to get it somewhat square, and then start planing.

Humanity in a world of inhumanity

Please, OvOlo is spelled and pronounced with the emphasis on the second O. It is NOT pronounced OvERlo. Similarly, "Shop" is spelled and pronounced with an O. It is NOT pronounced ShAp. Why oh why do Americans ALWAYS get Hollows and Rounds BACKWARDS? A Hollow plane creates a HOLLOW (Concave) profile. A Round plane creates a ROUND (Convex) profile.