Thanx Fixed Ha ha ha ha ha Someone turned the water off.. Gotta be me Where was my head man. Thanks for bringing it up or I would of had that thing tore apart Go over the easy obvious stuff first Even if it seems redundant Thanks a ton

@QuickAndEasy5MinuteAppliance

2 ай бұрын

You’re so right Michael😊

HEY! You just saved me 89 dollars in a service call! I love youtube!! And my grrlfriend thinks I'm cool. (Her machine) Thanks again!

@QuickAndEasy5MinuteAppliance

8 жыл бұрын

Thanks so much. I love it when it works😀. Please donate to the cause when you get the chance by pressing the support button below the video. Thanks again, Scott

LOVE IT! This is the second video I watched and I didn't think it would be this simple but it was. Ours was super slow and just swished it out with a tooth brush and now it's like a fire hose. Thanks MUCH!

I love you, right now. I got my machine running in 5 minutes thanks to this video! Thank you. 🙏

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Thanks so much😊❤️

The City turned neighborhood water off to work on pipes, when turned back on a lot of sand and debri came out in the sink, then my washer would try and fill so slow, I did what you said and its fixed! Thank god no repairmen to call! Thank you so much!

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

Great, Thank you

@valerieee3p

3 жыл бұрын

Hoping to see some sort of comment like this. Our city turned off water supply 2 weeks ago due to a winter storm and today tried to use my washer for the 1st time since. Water drizzled into the machine so slowly. Wondering if this is this issue. Thank you!

@beenrealubitch24

5 ай бұрын

Well I'll be darn my city turned out water off for about. 5 hrs in the middle of night few nights ago. I just now went to go wash and only got water side runs cold water side drips so slowly . Pretty sure this will fix it

Thank you so much never tried to do anything like this on my own.That was the problem ,and I am so grateful

I'm gonna try this tomorrow. my washer hasn't worked in about a year now. so, if this works I'll name my firstborn after you - even if it's a girl!!!

@QuickAndEasy5MinuteAppliance

Жыл бұрын

That sounds like a deal, maybe Scottina😂😂😂

@troylepisi

Жыл бұрын

Update?

@WannaBeatle-Paul_McMichael

Жыл бұрын

@@troylepisi I tried it back then and not much improvement (maybe a 10% improvement in reality). I'm going to assume that the issue is something else. I need to have someone take a look at it when I can afford it.

@troylepisi

Жыл бұрын

@@WannaBeatle-Paul_McMichael thanks for the update.

@justkrystel7078

Жыл бұрын

😂😂😂 good one

it was great to see this video. Saved me a lot of time as I went directly to the source of the problem...clogged..and not go beyond.

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

Excellent, thanks Harold

THANK YOU SOOO VERY MUCH FOR THIS VIDEO!! I literally just did every step and this was the issue! I almost spent over $500 for a new washer! Thank you, thank you, thank you!

@QuickAndEasy5MinuteAppliance

Жыл бұрын

I love it😊😊😊

Thank you so much. Very helpful. I have my machine hooked to kitchen faucet and only one hose attached to cold on back of machine but had machine setting on hot.. So it wasn't filling. Because you address a number of possible problems as you move through the video, I was able to solve my problem in Less than five minutes !!

@QuickAndEasy5MinuteAppliance

8 жыл бұрын

Excellent, Thanks so much

thank you Scott it worked

Thank you for your awesome video! It was exactly the issue with my washer - which filled with water perfectly after a 5 minute fix!

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+Mocky P Thanks Mocky, I'm so glad it worked for you😀

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+Quick and Easy 5 minute Appliance Fixes Thanks so much Mocky👍 If my advice has helped you, please visit: www.scottthefixitguy.com To make a donation to Scott's Coffee Fund -- Help Keep Scott Caffeinated😀 🌎 Thank You

Wow!!! You just saved me hundreds of dollars!!! Here in Texas and lost water and power for several days from the hard freeze. When things got back to normalcy, I tried washing clothes and noticed it not filling up the same. I also noticed the agitator wasn't working properly. But because of you and another video, I was able to fix both for under $10 and 15mins of my time. And I thought I was gonna have to buy a new one thinking pumps or motors were the problem. Thank you 🙏

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Nice job Jeff, Thank you for your feedback😊

You have to clean both of the screens in each inlet inside the washer hose inlet on the washer itself. There are two screens for each cold and hot on the washer.. One is inside the machine inlet that you can't see, and one outside the machine that you can barely see, it has a tab you pull out. Use a flashlight and look inside the inlet tube or nipple that's threaded, after you pull the first screen off you'll see it.. My inside screen was clogged bad, so I just took it out with a flathead screwdriver, and eliminated it totally. Both hoses were good, I saved some money, didn't need new hoses... All fixed.

@melissamccrystal5767

6 ай бұрын

Ty ty ty for the description

Life savor! We've already had this Samsung replaced after the concrete weight for the spin cycle broke just a year and a half of having it. Now just after another 2 yrs water wasn't coming in. Not again lol! You're video saved us from another headache. Thank you!

@QuickAndEasy5MinuteAppliance

6 ай бұрын

Awesome, I’m so glad it worked 😊

It works. Thank you😊

Thank you very much for this video as you helped me save tons of money on a new washer!

@QuickAndEasy5MinuteAppliance

Жыл бұрын

Glad I could help!😊😊

Thanks!! You helped me fix mine just now.

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Excellent😊

Useful Tips

Thank you Sir! Got my sister’ washer going. God bless you.

@QuickAndEasy5MinuteAppliance

Жыл бұрын

Awesome, Clifton I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzread.info/dron/bQy5UxlvaPPsDHvfvW76JQ.htmljoin

The master!

Omg i wish I would have seen this sooner we waisted 200 on a machine and t h ought it was broken and now we bought another washer and still the same problem and I just seen this and feel like such an idiot. You're awesome. Should have watched you a week ago.. ty

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Thanks so much Hilda, all’s well that ends well😊

thank you this really just helped me a lot thank you so much

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

+shelly dee Great, Thanks Shelly

Most helpful

Thanks for yuh help i will try this when I get home . I just got the washer an dryer today is made my day to a frown .

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Might be something wrong with the water supply from the wall faucet.

Hi Scott- My Kenmore 800 won't start filling, and there's no sound either. Yesterday I filled its bucket full (with no clothes in it), then pushed a down comforter in, displacing water which possibly spilled over the top of the bucket and shorted something out? What do you think? Thanks!

I use a spray bottle of water on stream and just spray the hole while holding a dish or towel underneath you won't believe how much stuff comes out

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+BRENDA SMITHERMAN Great idea

you are fab..just fixed this problem !!!being a gal thats too awesome!! thank you so much

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

Thanks Mizzcorrie, Nice going👍

Thank you.

Thanks Mr ... ya nailed it , water flow is good now! =]

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+Rick Z Excellent, Thanks Rick

Thanks for taking time of posting this video. It helped with my problem, saved me from buying a new washer.

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Excellent, Thank you😊

Thank you ,,,you are awesome !!!!

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

Thanks so much. Glad I could help.

It really worked! Thank you!!!!!

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Thanks Olka😊

Scott thank you soooooo! Much for your video. I followed your directions and my machine is working like a champ. 👏👏👏👏😊😊😊

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

Thanks Patricia❤️👍😊

Thanks; this fix did work.

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

Excellent👍

THANK YOU FOR QUICK AND SIMPLE FIX. MY WHIRLPOOL WASHER STARTED GIVING HOT WATER IN TUB, THANKS

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+rohit pandya That's great Rohit, I'm so glad it worked🎉

Thank you! I will try that.. It's also not spinning when water drains.. I forgot to mention that. My washer was working earlier today and that's when I noticed it wasn't spinning or filling up to wash.

@QuickAndEasy5MinuteAppliance

8 жыл бұрын

Thanks Melissa, Can you send me the model number?

@melissasanchez1218

8 жыл бұрын

It is a Hot Point... Model # HTWP1000M0WW

Hi my washer won't fill either. the last load i did worked perfectly. found a lot of fluffy wool on the out of balance stick took that off and moved the bowl back and heard the clicking. turned washing machine on and if filled but then didn't agitate nor spin. so took water out by hand and took agitator off and found there was a lot of water under the agitator. have done what you suggested on the video but didn't work. please help thank you.

Are there little screens inside the hoses to clean?

Thank you for sharing your knowledge... It helped save me $65 today!!!

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Excellent 😊👍

Thanks so much great information

@QuickAndEasy5MinuteAppliance

Жыл бұрын

You are so welcome!😊👍

It worked. You are my hero, sir.

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+blackwell5150 Excellent, thanks so much for the feedback👍

@mananahoyes7485

7 жыл бұрын

Quick and Easy 5 minute Appliance Fixes. i have question.. Can i use the drain hose to also fill washer

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+T.Bun2much4u!! b That might work. Some drain hoses only let water flow out. You could try it.

@mananahoyes7485

7 жыл бұрын

Quick and Easy 5 minute Appliance Fixes.... Hi scott..Guess what..It Worked...Thanks for the video..!!

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+T.Bun2much4u!! b Very cool, Thank you

Thank you so much!

@QuickAndEasy5MinuteAppliance

6 ай бұрын

You’re welcome 😊

Thank you so much!!! Key words: turn to the left!

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

Very good😂😂😂

Thank you you're a life saver! 2024

@QuickAndEasy5MinuteAppliance

6 ай бұрын

Awesome job😊

@Drumulater1

5 ай бұрын

I'd like to know if

thank you!!!!

@QuickAndEasy5MinuteAppliance

8 жыл бұрын

You're most welcome

Thank you!!!

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

You’re welcome😊

Hi I'm not gaving probkem with the valve but it's been on a working true for the last 30 years. I am thinking if it's not broke, don't fix it. But a part of me says every time I clean the screens in the house faucets it has a ton of sediment in it. Should I check these valves now or wait until the day they give me trouble? I hVe an old Kenmore direct drive system that I truly love and never want to have to replace. Purchased New in 1987.

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

Very impressive 😊 I love these washers. I would just keep cleaning the screens.

@HRTsAFyre

6 жыл бұрын

Quick and Easy 5 minute Appliance Fixes thank you for your reply.

Wow thank you. You helped me fix something that has been not functioning properly for a week now. Turns out, my 5yr old twisted off the water for the washer

@QuickAndEasy5MinuteAppliance

Жыл бұрын

That’s what 5 year olds do😂😂, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzread.info/dron/GpInAejvpfVVE4FHB_L-Dg.htmljoin

Well this saved me money on a service and my missus tried to tell me i wouldn’t find the solution 😂 cheers man

This was my problem thanks .

@QuickAndEasy5MinuteAppliance

9 ай бұрын

You’re welcome 😊

That's a great video! I was wondering however, if you could put me on the right track with these symptoms: Washer fills at a snails pace, BUT if I turn garage sink on full, we can usually get it to fill. Solenoid?

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Yep, Either a dirty filter coming into the solenoid or a faulty solenoid.

@clayguy33

5 жыл бұрын

@@QuickAndEasy5MinuteAppliance Thank you!

H Scott, Need your professional opinion please ... Just watched your YT VID on the water not flowing into the washer ... you said that unit was producing a high-pitch sound when it was set to run water into it ... but my washer is silent when I set the dial to fill it with water ... I had a repair guy here two weeks ago ... he ran a diagnostic test on it and said it needs a new chip ... but he never got back to me ... so I talked to several people about replacements parts and they said the idea of a washer needing a new chip did not make sense ... they both said it sounded like a problem with the water inlet valve ... but how would you explain the explain the silence? ... if I set my dial to SPIN, it works - you can hear the tub rotate ... your thoughts please. Thanks much ...

My Roper Washing machine cycles back and forth between hot and cold water (1-2 minutes each) during the fill cycle when the "HOT" water setting is chosen. The result is the water in the filled tub is lukewarm at best. Does anybody know if there is a part or parts that determines the length of these cycles? I'd like to make the hot water come out longer and/or the cold come out shorter to result in true HOT water when the tub is filled. A capacitor maybe?

Damn, My cold water has not worked since they fixed my well .. that was years ago. I have meant to check on KZread to see if someone could help me with this and yet cancer and other things have gotten in the way. NOW was the time. I watched your fix.. clean the screens and WALLA works TYVM. :)

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

Nice job, and best of luck with your cancer treatments.

New subscriber 👍🇨🇦

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Thanks so much👍

My husband cleaned the inlet filters with vinegar and an old toothbrush. Our machine is working like it's brand new now.

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+Jenny M Thanks Jenny, It's pretty common that those screens get clogged up and then no water.

@goombabear

7 жыл бұрын

Quick and Easy 5 minute Appliance Fixes We never had a problem until we moved to the country. It was the well water that clogged the filters.

I just installed a new water softener, and it clogged few faucets with Resin, including our washing machine, I followed what you did, and worked perfectly, thank you.

@QuickAndEasy5MinuteAppliance

2 жыл бұрын

Very nice😊😊😊

@domoniquethomas9230

2 жыл бұрын

@@QuickAndEasy5MinuteAppliance u.6l7l:-!O_o;-):-$:-!

HELP PLS! I only have the cold water inlet hose hooked up because I dont have a hot water faucet. So the hose just hangs from the back of the washer. When it drains before the rinse cycle, water comes out of that hose thats not being used. The hose is hooked up to the washer but not to a faucet. Any fix to this?

Thanks for the video. My washer fills, but the water stops every few mins. I have to push & pull the timer knob to get it to start again. Does it constantly until it fills to the desired level. Gonna try this & hope it may help. Unless it's something else...

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

I would replace the fill valve assembly. It’s pretty easy to do and they are inexpensive

i have full automatic Toshiba and suddenly stopped getting water from the faucet. pls help

I've got a question I've got a Kenmore 600 series less than a year old and the hoses are clear had a tiny bit of dirt but only the cold water is slow. The hot side runs fine. I'm about to buy new hoses eliminate that, think I'd rather staying with the older washer they clean better.

Just did the same thing , I was able to pull my filters out and cleaned them very well . Man was they filled with crap !

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Nicely done👍

Hi Scott I have maytag top load washing machine, when position to wash it makes like humming noise but no water and position to spin or drain it works. I wander what cost ? I checked hot and cold water screens at the back was clean thanks in advance

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Thank you, Do you hear humming when it’s supposed to drain and spin?

My 37-year old Maytag washer was very slow to fill. Turns out the supply lines were filled with gunk. We cleared them out, the washer works as if it were brand new.

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Awesome, Thanks so much Kate

@effiebug4278

5 жыл бұрын

@@LunarvanaStrike49 I was shocked.

Kenmore 400 pulled the filter was dirty but still no water. Had a fella working with it today the timer was working but like it wasn't send power to have the water fill the washer. We checked that water was running because he touched something by the bucket it looked blue and water started coming out when he stopped it quit filling any ideas?

I have a top loading intellowasher 2.6 and the model number is WF-T8501-TP it's a GE part of a stacking one . could you please help me. I need to save money by doing my own repairs. I'm actually looking forward to doing this I cleaned it as suggested with CLR to no avail. Everytime I searched for the part on Internet I can't find i the part number so I can order from Amazon if you could help me I would be ever so grateful. Debi Taylor

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

Here you are: Part number : 5221EA2001C it’s an LG part repairclinic.com has them

Is it possible to actually replace the coil inside a wonky solenoid? I have taken mine out of Whirlpool Model 6ALSQ8000MW and have tested that one solenoid is not working. Could it be stuck and could I dissemble the set up and get inside?

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+John McDonald You can just switch the coil, But it may have failed due to dirt stuck inside.

My Kenmore800 washer won’t go into start up mode(on any of the cycles). It does go into Spin mode(on all cycles) but for some reason it will not start the actual Wash cycle. Is there any chance you’ve encountered this problem before? If so could you please help me out on figuring out the problem?

@QuickAndEasy5MinuteAppliance

6 ай бұрын

Sounds like it’s having trouble sensing the load or with letting water in. Can you send a video of the start up to my email at: scottthefixitguy@yahoo.com

I changed the water fill with new solenoids, changed the lines, changed the lid switch with the fuse and switch. Water fill hums, no water comes in. Changing the nob to spin, it engages. Should i change the assembly that has the different load choices?

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Can you make sure the water supply from the wall is good and shooting out water?

hey I have an issue with my top loader not filling when line is connected properly in the carribean we don't use hot and cold just the cold which really is warm 🤣 however a few days ago it stopped filling I cleaned the filter mesh and it still wouldn't fill I switched the line from cold to hot now it fills but wont fill to rinse. any ideas as to what I could try?

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Time for a new valve

@alicebratton6120

4 жыл бұрын

Mine is doing the same thing, what did you do to fix your

HI!What to do if water keeps running but won't fill the machine?

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+huyghes vanessa Hi Vanessa, That's called siphoning . It means that the drain tube is going too far down that tube in the wall. You can fix it by pulling up the Drsin tube so it's just six inches into the tube in the wall. That should fix it. Please let me know how it goes.

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+huyghes vanessa Hi Vanessa, Just need to pull that drain tube out of the wall tube and just have it go in 6 inches. Right now it's too far in and creating a siphoning problem.

@huyghesvanessa6468

7 жыл бұрын

Just try that but still not working.water is coming out but won't fill the machine.pls help.

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+huyghes vanessa Hi Vanessa, Can you send a picture of where the drain hose goes into the wall for me to scottthefixitguy@yahoo.com

@jamilahthealchemist

7 жыл бұрын

omg thank you!!!! this helped me and my husband with a washing machine we just bought from a random guy lol It works and im so happy. Just from reading this post thank you thank you

i have Mytag upper filling machine like this one 110 volt and stopped filling I check the hose filters for both cold and hot but it is clean should I change the solenoid valve if yes how to do this thanks in advance .

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

Sounds good Sami. Are you sure the machine emptied out all the water from the last cycle? If you put your model number in a google search with the term fill valve, you’ll see a few videos on how to replace the valve.

@samisulaiman7967

4 жыл бұрын

@@QuickAndEasy5MinuteAppliance Ok my dear thank you in arabic : shukran شكرا لك

I have a portable washer and water will not fill washer but when I disconnect hose from sink water explodes out of sink. Any ideas what's wrong

Dear sir, I have a frigidaire washing machine that will not fill with hot or cold water I have replaced the water valve where the water comes in-I have replaced a $200 timmer that did not fix it so it moved on to the pressure switch- I blew into the line going down to the bottom it is clear so I blew on the valve itself and I can here a valve or reed opening and closing What can I try next-i am use a backup washer and it works fine-so there is no water pressure problem-I put a meter on the water valve inlet and it makes a beeping noise on the hot and cold solenoids-so I put the meter on the pressure switch and it beeps as well-the only thing I know to do at this point is to load the old 12ga with slugs and havesome fun-i know that if I put it out on the curb someone will get it and fix it-and I'm not going to have that done to me-can you tell me what I might try next-if I fill the washer with water it will wash and it drains the water out-o and when I start it-it starts to agitate before it starts filling with water

@QuickAndEasy5MinuteAppliance

Жыл бұрын

Hi William, I think it’s the door lock . The controller thinks the door is open so it won’t progress to filling.

Hi! my Toshiba AW-D703VP(W) won't fill water and after 1minute it will gives an error. It doesnt have the hot and cold water inlet like the ones on the video. been trying to find ways to make it work, i even tried basic trobleshooting like if waters on/off check if the clothes were heavy but still not working please help...

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+trixia mariz maglasang Sure sounds like their is some junk caught in the inlet valve. Just unscrew the hoses that connect to the back of the washer and remove the junk caught there. Did all the water drain fro the last cycle?

Washer manufacturer said they will work on an older machine but the computer type machine will need a new valve.

My washer ge gcwn2800d only rinses and drains and spins. Can’t get it to start will this work?

@QuickAndEasy5MinuteAppliance

6 жыл бұрын

That may do the trick

So what if I’m not getting water at my valves? I went to the basement and made sure every valve was open and still can’t find the problem.. thanks in advance

What comes next if the screens are clean? (Whirlpool wtw4950xw)

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Time for new fill valves

@amandagrayson8888

5 жыл бұрын

@@QuickAndEasy5MinuteAppliance Thanks. Not the answer I was hoping for, but thanks. Now, I have to figure out how to open the cabinet.

@Neolantis

3 жыл бұрын

What if you changed the fill valves. What next

Thank You the water was on but the cold water line was clogged.

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

Thanks Keith, common problem

@cdysmitty6792

7 жыл бұрын

+Quick and Easy 5 minute Appliance Fixes I want to start off by saying good video and I wondering what was the washer doing before you fixed it was there any water coming out at all

I have a whirlpool top load washer that when you put your clothes in then turn dial to regular wash it will not fill but washer starts agitation without filling. Any help would be appreciated.

@QuickAndEasy5MinuteAppliance

7 ай бұрын

Do you think the water valves on the wall are turned all the way on?

@user-ot6bm1pj9h

7 ай бұрын

Yes got it fixed was out of time. Thanks

I have a ge washer with a top mounted pressure switch. Pushing start button activates the valves to fill for a few seconds then stop. After a couple of starts it finally works. Why??

@QuickAndEasy5MinuteAppliance

Жыл бұрын

Hi Brian, Can you send that same question to my email at: scottthefixitguy@yahoo.com

Hey there I'm haveing no fill issues door switch check's out fine.motor works when I checked it with cheat cord. So I filled with hose to correct water level does not spin it does nothing what can be the issue

@QuickAndEasy5MinuteAppliance

2 жыл бұрын

Hi Rudy, Think there’s something wrong with the water level sensor. I think that the machine thinks that the washer is filled with water that might be why it won’t let new water in. Could be that the clear plastic hose that goes between the tub and the water pressure sensor fell off

I can hear the water going into the washing machine but it seems to automatically drain because it never fills up. Any help is greatly appreciated.

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+lukkee1 The drain tube is too far down into that big black tube that goes into the wall. Try to shorten your drain hose so it only goes into the tube in the wall by 6 inches.

@NeoshaGardner

4 жыл бұрын

This comment saved me!!

What could it be if it starts agitation off the rip?

@QuickAndEasy5MinuteAppliance

3 ай бұрын

The washer thinks it’s full of water already.

clean screens can make a world of difference when it comes to water flow

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+desertdispatch You speak the truth👍

@1deaver

7 жыл бұрын

desertdispatch cleaning the screens worked for me too, thanks

@desertdispatch

7 жыл бұрын

Yuk Foo your welcome. It's amazing what difference a clean screen will make.

@desertdispatch

7 жыл бұрын

been there done that and got the t shirt. I feel your pain

Could this also cause the water to keep filling and not stop?

@QuickAndEasy5MinuteAppliance

Жыл бұрын

Does it overfill or just keep filling ?

@victoriaphoenix4999

Жыл бұрын

It keeps filling

Mine is 25 years old, it's a trooper. But, it looks like it needs a valve replacement, since i have no cold

@QuickAndEasy5MinuteAppliance

10 ай бұрын

I think you’re right👍

@TheClownfight

10 ай бұрын

This was the issue. Thank you SO much for the video. A $22 part online I fixed in under an hour... versus what would have been probably a couple hundred bucks for a service call. Plus, wife thinks I'm a handy genius. A hundred thumbs up for this video. Love from Denver, CO

@markcummings6856

8 ай бұрын

@@TheClownfightWow, good to hear! Great story and experience.

I ordered a new inlet valve. I'm got a LAT8426AAE maytag and after just doing a load, it wouldn't fill for the next load. Spurted a tiny bit of water and then won't fill. I am so hopefully this is the problem... Not sure what else it would be

@QuickAndEasy5MinuteAppliance

Жыл бұрын

If it isn’t a clogged water inlet valve filter, then you just need a new water inlet valve.

@markcummings6856

8 ай бұрын

May I ask if your Water Inlet Valve was the culprit? I have similar problem I believe as it just adds water for like 3 seconds and just stops. I was thinking the Water Float Valve being defective sending a premature signal to the Inlet Valve to STOP sending water? Thanks kindly in advance if anyone has any helpful info.

Same problem as another comment,water running into washer not staying filled,drain tube siphoning issue?

@QuickAndEasy5MinuteAppliance

5 жыл бұрын

Yep, Might need to pull that tube further out of the drain in the wall so it won’t siphon

@rustyshackleford1785

5 жыл бұрын

@@QuickAndEasy5MinuteAppliance tried it earlier,thanks for input and response!

I have one and it's still going very strong

@QuickAndEasy5MinuteAppliance

6 ай бұрын

They are awesome washers 😊

I have a a Samsung front loader it’s only running on rinse a spin cycle, trouble shooting say obstruction what now…

@QuickAndEasy5MinuteAppliance

Жыл бұрын

There might be something clogging the intake screen which is right where the water hoses connect to the washing machine. If that doesn’t work then you may need to replace the water inlet valve.

What about my washing machine going straight out the drain how can I fix that

@QuickAndEasy5MinuteAppliance

Жыл бұрын

Can you send the model number?

What about when the water runs but just seems to drain right back out?

@QuickAndEasy5MinuteAppliance

8 жыл бұрын

That's called siphoning and is caused by the washing machine drain tube being too far down into the Black ABS pipe coming out of the wall. It should only go in by 8 inches

What if the machine (my machine) starts the washing cycle before filling?

@soniahopwood445

4 жыл бұрын

that’s my problem too

I cleaned out the water screen filter , machine is still struggling to fill up?

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Good time to replace the fill valve.

I have a lg top load washer model #wt4801cw. at first I got an error code of dl. I managed to fix that problem. then while attempting a tub clean cycle, the machine starts to fill then automatically stops after about 30 seconds and displays an LE error code. PLEASE HELP!!!!

@QuickAndEasy5MinuteAppliance

7 жыл бұрын

+Tonja Martin Hi Tonja, Try this: . ... To reset the washer, unplug it and press the Start/Pause button for five seconds before plugging it back in. The LE code can indicate that the washer has been overloaded

Hi, my machine won't draw water. It's one that can only draw water when the lid is down. I was feeling around in there today and noticed that there is a switch of some kind under the lid on the back left side. When the lid goes down theres a little lever that slips up into a spot and hits something that makes the water come on. What is this part called and how can I fix it?

@QuickAndEasy5MinuteAppliance

3 жыл бұрын

Nice job, You’re right, you need to replace the lid switch.

@barbarapurcell7296

3 жыл бұрын

Do you have a video on that

Hi my machine wont fill up with water when I try to do a cycle only starts humming but the spin and drain cycle works any idea what it is?

@QuickAndEasy5MinuteAppliance

4 жыл бұрын

Just need a new fill valve