Thank you so much. Sears wanted to charge me $500 for this fix on a seven year old washer. With your video and a $45 valve part, I was able to fix my own washer. 64 year old woman not afraid of DYI. Thanks again

@charlotte5671

Жыл бұрын

Thank you! You're giving me encouragement as a 40 y/o woman who hasn't done a lot of repairs.

@cynthiahanna3212

Жыл бұрын

I'm a 59 year old single woman, and I did it too! So much satisfaction when you can figure it out yourself(well, in this case, this great video guy helped me!)

@HBKAT100

4 ай бұрын

Me too. I paid $27, and the part has a 10-year warranty.

One of the only people on the entire internet covering all the potential issues that could come up with this product. Saved us 100s of dollars worth of repairs 50 dollar part fix instead of 400-500 from a technician! Thanks a million.

@btuff

Жыл бұрын

Glad it helped.

Thanks brother- I replaced the valve and had the tube connected to another spot on the backside of the display- your “wait til the end moment” was exactly what I needed. You da man!Also- I feel that the butter knife is the best way to get that play top panel off- I am getting pretty good at that!

THANK YOU SO MUCH! I have the exact same washer, same age- two days ago, NO water would run. I am a single Mom, so I don't have money for a repairman! What saved me is the three time button reset you performed! IT WORKED! I would have never known about this if it weren't for you! Thanks again!

You’re an absolute life saver my man! Other videos were skipping steps and this one helped tremendously

@btuff

Жыл бұрын

thanks. I thought the same thing.

Thank you I fixed it without replacing the washer and saving money for a single mom budget I thank you very much

Thank you sir. Fixed my 800$ whirlppool cabrio for about 25 bucks. I was about to haul it.

@Counter-Intuitive

Жыл бұрын

How did you fix it?

Thank you!! This was a major $$$ saver and absolutely worked! $25 and a bit of time and it’s fixed. Hardest part was finding the right socket in the tool drawer and then removing the top panel. I will warn everybody…be careful removing the panel as I did snap one plastic clip. Seems okay regardless, just a tad loose on the one side. Pull up and forward (to front of washer) rather than what I did pulling straight up. But thank you for posting this so much!!

@btuff

5 ай бұрын

That’s great. I know there’s people out there like me that could use the help.

@HBKAT100

4 ай бұрын

The plastic puddy knife worked for me but it took a little force. I was so scared to break the knife or the panel.

I wanted to tale a moment to thank you for this video. You gave me the confidence to repair my Whirlpool Cabrio machine. Everything as exactly as you described. The clips were the hardest but in the end I did it in about an hour and saved me $417 from a scam tech who claimed he was going g to replace the water valve assembly which per Whirlpool doesn't exist in this machine

@btuff

4 ай бұрын

That’s great. I’m glad it helped you

this worked perfect. changed the valve and it’s now fixed.

I would like to thank you for this video on fixing my problem i replaced the mother board i tested the connection and the connection to the hot port was busted so i ordered the part on amazon which is around 30 bucks and that totally solved the problem i reset the machine and now it’s like brand new the technician that came over did not even bother checking it out and just mentioned that this brand is not good if i hadn’t viewed your fix then i would have just gotten rid of it and paid 800 bucks for another one and this machine is less than 4 years from costco Many thanks again

@btuff

Жыл бұрын

Glad I could help. I was shocked how much local appliance stores mark up part prices.

Thank You! I can do this. I shouldn't have to, but it is what it is. A two year old Maytag computerized washer... Why did the industry decide they needed to electronically modify everything? This is the Third computerized washer we have bought in the last ten years... My next one will be a Speed Queen Commercial Washer

superb video!

Thank you for the advice. I will let you know if I have fixed my machine, or not.

Do you have the part number for the first thing with the 3 clips that you removed ?

I think my water level pressure switch needs to be replaced, but I don’t know how to get to the switch that the hose you reconnected is. My symptoms are that the water level doesn’t fill enough, but i replaced the valve and tested that there is no clogs in the hoses.

Great video and information. It just might be the valve that's not working any more. I'd love to have the service manual, but really don't want to take it apart for it. haha My diagnostics so far are... 000 locked, 001 nothing, 002 got hot water, 005 got cold water 006 & 007 nothing, not sure if they are anything, 008 drained, 012 spin, didn't work. I've even checked it plugged into another outlet in case it was low voltage. The high pressure tube looks like it is connected just fine. Next... I'm poppin the top off.

What was the part number for the water inlet valve

i have this same machine and after watching this ordered a new inlet valve but that isn't the problem. still not working, also tried the reset, any other suggestions? we just moved it last week to have new floor put in and it worked before we moved it and now it won't push water in. it will spin as it should, but no water inside. Help?

@Lolo-vx3kp

Жыл бұрын

Same here how did u fix urs

Do you have any advice for an F3 E1 that keeps repeating even after unplugging

That TUBE ! Never would have thought about that. But thats what it was. Thanks.

@btuff

5 ай бұрын

I know. It’s crazy that most videos don’t address that.

Nice RO system from brs. I built mine myself but basically used their platform. I've recently been having issues with my washer/dryer combo (stackable) and I'm getting absolutely no water out of the cold water valve/tap and I'm only getting tap water temperature from the hot/red side. So I've concluded that since there were "repairs" done to the downstairs apartment recently, that I have no access to, someone messed something up somewhere. So I'm just going to run temporary lines to the machine itself where I know h/c water is coming from.

@btuff

Жыл бұрын

Check that hose on the back to make sure it's not leaking or damaged. It literally controls the pressure out of the wall into the washer.

@ericsfishingadventures4433

Жыл бұрын

@@btuff mine is a slightly different model. But I'll look into it. Thanks for the tip. Since I'm getting not anything from the blue/cold water tap. And only water from hot/red tap is producing water(that's not even warm) . I'm going to look at the water supply first..but I really do appreciate you're responding.

The clear tube wasn't your problem. It's not a high pressure sensor. It's a tube that goes to the water level pressure switch on the circuit board. It would still fill with water if it wasn't connected. It would just overfill from not being connected.

What model is your machine? I just want to make sure I order the correct inlet

@AzmiraOlivia

Жыл бұрын

Mine is the cabrio WTW8040DW

@btuff

Жыл бұрын

@@AzmiraOlivia that's what I have and that valve works a lot of newer machines.

I followed this and have a f6e2 code

What’s the name of the valve I have LF error.

You have to hold the start button down longer than you did. It made that double tone which means your button press was too quick.

If 1 of those 3 blue thingies are cracked I should get a new water inlet piece huh?

So, I just got one today and it’s trying to wash with the water line half way below the top of the clothes. I’m gonna call em tomorrow and tell them to come pick up this POS.

Can some one help me with the name of the part replaced? On my unit the hot water fill works and then the manual cold fill button inside the unit works. But the cold fill trickles water in. I’m not getting any error codes though. Thank you in advance!

My Cabrio is model # wtw7300Dw2

while i appreciate the help here, the part you provided a link to does not look like the part in your video :(

My whirlpool washer has a senor and it will not fill with water, what is going on with.. can someone help me figure this issue out

I get a LF error because my washer won't hold any water. It runs directly back out.

How do you fix the F3 E2 error on the Cabrio Washer?

@btuff

Жыл бұрын

The F3E2 Error Code indicates that there may be an issue with the Temperature Control sensor. Try resetting the washer/dryer by unplugging it from the outlet for at least 1 minute, and then plugging it back in.

@philliptaylor5981

Жыл бұрын

@@btuff Do you have any personal experience with the Cabrio Washer 2016-17 model year?

@julieriggins2293

Жыл бұрын

I have error codes F1 and E2. Know anything about those codes please?

@julieriggins2293

Жыл бұрын

So in all the different videos that I've watched, when everyone is done running a diagnostic chk. I'm pretty sure but no one will say. . How you reset or is it recalibrate th Cabrio?

@philliptaylor5981

Жыл бұрын

Did you figure out your issue?

Shoulve tried it with old Valve...see if that Tube was the problem...😬😬😬

@btuff

Жыл бұрын

I honestly think it might have been

@utubewinsok6484

Жыл бұрын

@@btuff does your washer always hold some water even after you run a cycle? I always have a little bit of water. I checked all my drain hoses and no clogs or blockages.

@btuff

Жыл бұрын

@@utubewinsok6484 yes. After a few weeks put some chlorine in and let it set

Sure will not fill with water but it still spends show me how to fix