It's people like you that are so willing to help others, that makes this country and this world a better place. Thank you sir, for your knowledge and willingness to help other people who cannot afford to run out and buy new things all the time. I'd much rather take care of the things I already have. You helped me with my washer today whether you know it or not, as it overflowed all over my basement. It's Christmas day and you just gave me a fantastic present. God bless you and your family!

@DanWebster

7 ай бұрын

Glad to help ! Git er did! PawPaw

Wow, thanks alot! You remind me of my dad. He always figures out the cheapest and easiest ways to fix things.

Dan… I love yuh brother!! I replaced the lid-kill-switch and failed to pay proper attention to that air line when I reassembled… pinched it and had a flood!!! Watched yer video… realized what I did… and bingo… she goes low-medium- high just as intended!! I bet yer a good shooter too!! 👍🏻👍🏻

@DanWebster

Жыл бұрын

qualified sharshooter at PI 72

You, Sir, are a saviour. Thank you.

Thank you when I saw the hose I had no idea why it was just there not hooked to anything. I was replacing the rubber straps and had no idea what went wrong. 👍👍👍

@DanWebster

Жыл бұрын

glad to help

Holy Crap! This worked!! Our washing machine decided to overflow after multiple loads today. I happened to catch it as water was running across the laundry room floor. Shut off and drained the washer and threw every towel we had on the floor. Then drove to one of our parent's house for a shop vac and I found this video on the way. We tried it and it worked! We checked it on each fill level and good each time. We'll be watching the thing like a hawk from now on but thanks for saving us a replacement part/repair for the moment!

Thank you so much! I was turned the washing machine on this evening and walked back to a flooded hallway. Checked that hose and sure enough it was plugged with debris. This video saved me a lot of trouble!

@DanWebster

8 жыл бұрын

Glad I could help git her did!

Thanks for this video PawPaw. I was able to fix my Kenmore model 110 following your video instructions. No more overflowing. Machine works like new again. Thank you!

@DanWebster

2 жыл бұрын

My grandson had the same problem so I knew how to post on youtube and made this video spur of the moment like all my other ones, LOL glad to help, that was the whole point of why I bothered to jump to light speed and get on the web.

Thank you, I really needed this today and your explanation was the best: simple, clear and did not cause me to panic.

@DanWebster

3 жыл бұрын

Glad to help

Sure I know this is an old post but I want to thank you so much for your time and sharing your knowledge! I have had a plumber come out to my house countless times and none of them have been able to fix my issue. Then I found you! Now my problem is fixed and I didn't have to pay a penny! God bless you and yours always! ❤🙏❤

@DanWebster

5 жыл бұрын

Glad to help

This was perfect. Thought I had to buy a new washer for my small business. I am not a handyman at all and this worked like a charm and saved me $$$. Thanks!!

@DanWebster

2 жыл бұрын

Glad to help

Thanks for the help Pawpaw! I done sit through an hour of bs technical crap trying to fix this dang thing while my wife's all PO that it's flooding the house and you done gone and saved the day in less than 3 minutes without all the bs technical crap! Thanks!

@DanWebster

7 жыл бұрын

Git her done!

Thank you so much! I can’t believe this actually worked. Thought it was a prank lol. Almost bought a new machine.

@DanWebster

3 жыл бұрын

I live near the gulf, sand and sediment can easily cause a major malfunction. Thankfully its an easy fix, I actually made this video for the benefit of my grandson who had the same problem and over the years its made quite few folks happy. Glad to help -PawPaw

Damn…it worked. My GE machine is more than 20 years old. GE Is excellent product. Thanks Bud👍✌️

@DanWebster

9 ай бұрын

work great especially on them old ges i loved them washers. Things of beauty then they went cheap and killed it.

a real nice simple low tech fix. very good Larry

Thankyou so much. In a matter of seconds my machine was repaired. The wife was on bestbuy website to purchase a new one. But I found your video and it saved my hundreds lol. Thankyou so much

@DanWebster

3 жыл бұрын

Glad to help

Thanks for the great video! When I reassembled the washer after changing the capacitor I accidentally pinched this tube with part of the washer frame and all I had to do was open it up, re-align the tube you showed here and tighten the screws back together. Thanks for confirming my suspicions that this part was the source of my overfilling problem!

@DanWebster

6 жыл бұрын

Glad ye could git er did!

great video. i don't think any body will forget this easy fixed

@DanWebster

5 жыл бұрын

thanks I did it to remind everybody we all need each other and especially if we are broke and caint pay nobody

You are awesome. Thank you for posting this. I had the washer full with water. You have to blow til you get bubbles. Then you are free and clear.

@DanWebster

5 ай бұрын

glad to help

I'm playing this video on my stereo speakers... My dogs are barking back at his! Lol I'll let you know shortly if this works. Wish me luck! I'm a first timer at this sort of stuff. EDIT / UPDATE: 3 minutes later my washing machine is fixed! The hardest part was moving it a few inches from the wall so that I could unplug it. THANK YOU!!!!

Thanks Dan, my Series 80 washing machine overflowed for the first time today. You saved the day with this quick fix, I bought it in 1997 and hope to get even more years out of it. p.s. I'm having an extra cold adult beverage in your honor ;-)

@DanWebster

4 жыл бұрын

Glad to help

That was exactly what we needed! We weren't able to blow through the tube at first, so we knew it must have been clogged We used an air compressor & vuala, it works! Thanks for posting this video!

@DanWebster

6 жыл бұрын

Glad to help -Paw paw dan

Thank you dan! This worked! My washer was overfilling with water the last 2 weeks. I did exactly like you said. Opened the top of the machine, I blew air into that hose and that other switch,put it back together , put a load of clothes in and bam it started working like normal. My first time ever working on a washer and wow I'm amazed it worked! You are the man!! Truly grateful for your helpful information 🙏.

@DanWebster

2 жыл бұрын

So glad to help

So glad I found your video . The tube had come off. Machine is up and running again. Thank you.

@DanWebster

6 жыл бұрын

Alright, so glad to be of service

Thank U, sir, 4 your teaching. U are the best. Only one advise: don't detach Water Level Pressure Switch, remove only water pipe and the rest do it as you showed.

@DanWebster

7 жыл бұрын

Thanks I wanted to show how easy it was to replace, give a little theory on how it works and demonstrate how easy of a fix it actually is and regardless of the brand all washing machines in this category basically work just like this. Now there are fancier water saving washers with dual levels and stuff with water diversion to circulate the water and use less of it. Thanks fer watchin. PawPaw the retired appliance parts monkey :D

The hose was clogged.. fixed now. Thank you!!!

@DanWebster

7 ай бұрын

Glad to help Happy holidays

Thank you. I fixed it. We were just about going to buy a new washer but I fixed it with your help. Thanks

@DanWebster

9 ай бұрын

Glad to help friend.

Mine overflowed while on the large setting. It stops fine for medium and small. After watching your video it reminded me that last time my tube that goes to the switch was clogged. Yay me I have a new one because I was able to wash out the old one. Thank you Paw Paw for you video

@DanWebster

6 жыл бұрын

Glad to help

@sdanville

5 жыл бұрын

there is a screw on the back of some of them to make them adjustable.

Dont forget to check the end of the hose. Take the shell off, follow the hose, make sure it isn't clogged, and make sure it's on tight. If it looks dirty at the end ir stretched, snip a small piece off the end, and plug the hose in

Thank you so very much for your very clear and concise video. I know it may not be a fix for everyone's machine, we tried it on ours , and it worked perfectly. We were done fixing it in less than 10 minutes. We ran some test loads a small one first, then a large one and it worked like a champ. Thank you again!

@DanWebster

7 жыл бұрын

Glad to help

you nailed it. blew on the tube tube to clean it, verified switch(?) clicked... good as before. you saved me a couple hundred bucks!!!

@DanWebster

7 жыл бұрын

Well hell yeah glad to help hit my buy me a beer button on here cause shit I need a beer. LOL

Our hose had fallen off and never would have known without your help.

Keep putting up these videos! Was a great help. Found out that our water pressure tube had probably shaken itself loose. Was able to re-connect it. Works fine now.

@DanWebster

7 жыл бұрын

Glad to help

Easy, stress free fix. Appreciate it much!

@DanWebster

Жыл бұрын

thanks

@indiaonaplate9002

Жыл бұрын

@@DanWebster Welcome

thanks bud- I went inside though and used a air compressor and a metal rod to clear the crud in the tubes on the lower end but yours will work fine its just it gives me a peace of mind to actually see the crud removed from the tube kudos

@DanWebster

7 жыл бұрын

glad to see ya git her done

Its videos like this that save me alot of money!!!! Thank you sir!!!!!!!

@DanWebster

4 жыл бұрын

That was my plan when I did this, help peeps out Glad you could get it did -PawPaw

I have been struggling with my overflow problem for a couple of YEARS now. None of the fixes I found online worked, and it kept randomly "fixing itself" and then breaking again. Always suspected it was some kind of blockage. This fix did it. You made my week, sir. THANK YOU!!

Saved me...! Opened it up and the hose had fallen off the switch... Fixed! Thank you!

@DanWebster

7 жыл бұрын

glad to help

Thank you so much for this video😀😊💓 the valve was disconnected and I did what you said and it works perfectly thank you Sir! God Bless You 🙂🙂🤗

@DanWebster

5 жыл бұрын

Glad to help

PawPaw, you know your stuff about major appliances! Thanks for the teachin'!!

@DanWebster

8 жыл бұрын

+D. J. Tanner Thanks for watchin

@crickettv4936

6 жыл бұрын

Dan Webster how do you get to the tube ,GE high efficient,newer model,can't take of the front?should I pull washer out and unscrew bolts(work from the back)

Thanks Dan!!!! I will tell people to check out your page

@DanWebster

4 жыл бұрын

Glad to help that was my plan to share knowledge

A thousands Thanks You saved my bacon !! I had No idea it would be that easy of a fix. Got the top off and sure enough that tube was not attached. Hell of thing have to give it a BJ to get it to work. lol.

Thank you paw paw so much!! That saved me a $150 service call!!!!

@DanWebster

5 жыл бұрын

Glad to help anytime.

Thank you! This is exactly what was wrong with my washer. Thank you for the help.

@DanWebster

5 жыл бұрын

Glad to help

Hell yeah i opened up my washer and my hose was left off by the technician that came and replaced the water valves and im sure if i would have called them back they would have found a way to charge me some thing even though it was their fault

@DanWebster

6 жыл бұрын

yeah, it is really easy to have something like this happen and even pinch the hose, seen that also. I always let a machine go through its paces before pronouncing it fixed.

@Mikeybarrelpassinggearbracket

6 жыл бұрын

Dan Webster yessir thank you very much. Ive been having to watch videos and fix my own washer for the last year now. Ive replaced the agitator dogs, motor coupler, and recently had a problem with it spinning out of control and gave me a hard time so i baught a used one and had the guy fix with warranty but he left the hose loose

Great video, now I won't have to buy a new washer! Thanks for uploading.

@DanWebster

7 жыл бұрын

no problem glad to help

Short and simple fix. Thanks for the info!

@DanWebster

6 жыл бұрын

Glad to help my friend

Thanks Uncle Dan! It worked for me!

@DanWebster

6 жыл бұрын

good deal

@the_real_santaClaus

6 жыл бұрын

Dan Webster is there a way to secure the hose so this doesn't happen again?

@DanWebster

6 жыл бұрын

small clamps or zip tie

Saved me today. Thank you sir!!

@DanWebster

2 жыл бұрын

glad to help

Nice video. I'll try this on mine. It won't stop filling. Had to turn off the water valve. Thank you my good man.

@DanWebster

8 жыл бұрын

+red0means0go be sure and pump it out before retry so the pressure canbuild up in the supply tube from tub to water level switch

@joeKisonue

6 жыл бұрын

I had gunk in my tube. Had to clear that shit out

Thank you! My hose had fallen off and this fixed it right up. Appreciate it!

@DanWebster

6 жыл бұрын

Glad to help A J

Your a real life super hero, I mean it ‼️💯

@DanWebster

Жыл бұрын

Thank you

Your the best. Keep makin these quick fix videos.Thanks

@DanWebster

6 жыл бұрын

Thanks glad to help

PawPaw Thank You so much for that valuable little gem!!

@DanWebster

5 жыл бұрын

Glad to help

Lifesaver! Awesome video!! This guy is the Jedi of appliances

@DanWebster

7 жыл бұрын

Yo soy le bom tempos mofo fer sho.

@DanWebster

7 жыл бұрын

Glad to help

DUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUDEEEEE!!!!!!!!!!!!!!! THANK YOU SOOOOOOOO MUCH!!!! HUGE MESS. FOUND A BLOCK IN THAT LITTLE HOSE. TURNED IT ON... PERFECT!

@DanWebster

7 жыл бұрын

Glad That fixed it.

Thank you!!! The hose had fallen off

Thank you! Just fixed mine in minutes because of you.

thanks bud just got a call from the wife will try this when I get home.if it works ill come back and subscribe

Hell, it fix it! From Haleyville, Al! Reckon you’re my hero! Thank you sir!

@DanWebster

4 жыл бұрын

Glad to help all my fellow Alabamians and everybody else I love yall mean ir -Pawpaw

THANK YOU SO MUCH YOU SAVED US A REPAIR CHARGE!

Thanks man that save me a few hundred dollars your a star

@DanWebster

6 жыл бұрын

Glad to help

Paw paw you were right 🐐🐐🐐

@DanWebster

6 жыл бұрын

Glad to help

Dan, thanks so much for the excellent trick. You're the master!

@DanWebster

7 жыл бұрын

Glad to help! get er done!

Thankyou so much... I went through many videos but yours help me. 🤗👍🖖

@DanWebster

6 жыл бұрын

well alright glad to help

thanks bro I got it to stop filling with water but it still won't agitate so I guess ill have to check the couplor I believe its connected to the motor

Wow, that was a perfect fix. Great video!

@DanWebster

6 жыл бұрын

Well alright I has 2 happy peeps today, excellent

Wish you did more videos pawpaw

@DanWebster

Жыл бұрын

If I come across a doosey I will do just that I am dan webser 587 on tiktok

thanks for the video, you are a man of many talents

@DanWebster

8 жыл бұрын

+Timothy Lewis Thanks got a call from my peeps out in west Mobile today with a washer overflow problemer. Thanks fer watchin.

That was so awesome! Thanks! And, you are quite the character!

@DanWebster

6 жыл бұрын

Thanks for watching I have a lot of diy videos and now that i have a new canon camera I am going to make some more but I am retired caregiver taking care on my 90 year old mom and so these repairs are just for fun.

thank you papa!!!! very much. any yes i do like that,

@DanWebster

6 жыл бұрын

Glad to help brother

You had me at "howdy players 🤠"

@DanWebster

Жыл бұрын

Thanky Kindly

Great video Playa!! Will check when I get home!

On the off chance anyone will read this, know the answer and respond…here goes: my Kenmore elite washer (1999 direct drive) is working fine save for one HUGE issue. At the tail end of every wash cycle, when the time gets to the last number of minutes (I.e. right before drain and rinse cycle), the washer suddenly starts filling with water, and overflows unfortunately (sheetrock, baseboard repairs, damaged cabinetry…what a disaster). I do not want to give up this beloved machine and know there MUST be a fix for this somewhere. Tubing and pressure switch are fine. Machine fills to proper levels at exact same place every load. It is ONLY overfilling at this same point every cycle. We have been unable to find an answer on internet yet. SOS! Help? Ideas? Advice? Many thanks!

Thank you thank you thank you!!!!

@DanWebster

6 жыл бұрын

Glad to help a link to the service manual for machine is in my about section.

@DanWebster

6 жыл бұрын

my direct drive washer blog: sites.google.com/site/sublimeappliancerepair/washer-will-not-spin

Thanks Paw Paw, short and sweet and did the trick!

@DanWebster

7 жыл бұрын

Glad to help

@DanWebster

7 жыл бұрын

glad to help

Thank you Gator!!! I Fixed it just like you showed on this Video... save me some $$$

You’re the man saved me some coin

@DanWebster

4 жыл бұрын

cash app: $danwebster1600 buy me a cold beer or 2

Thanks Dan!

You just saved my life! Thank you !!!

@DanWebster

5 жыл бұрын

Glad to help

You're awesome for sharing your knowledge! Thanks a heap!!

@DanWebster

7 жыл бұрын

Glad to help

Thanks Sir! From Quebec thanks . It really helped me!!

Dog wants to be in the video - love that.

@DanWebster

7 жыл бұрын

puppy dog a doodles

You are an absolute saint, THANK YOU!

@DanWebster

5 жыл бұрын

glad to help

Thank you sir, you are a genius😄

@DanWebster

6 жыл бұрын

Glad to help.

You da man!! Although I never thought I’d blow a wash machine. Haha thanks!

@DanWebster

6 жыл бұрын

Lawdy

IF the problem is the hose....then you do't need any parts. There's more than that for a reason.

@DanWebster

3 жыл бұрын

I live near the gulf of mexico. Lots of sand gets into a washer from bathing suits. The sump where the tube is connected at the base of the tub gets a bit of sediment. You give the opposite end of the hose a good blow, drain out the water. Reconnect the hose securely to the level switch and retry. You good to go another 10 thousand miles. Hee hee Note: sometimes the hose gets a hole in it or simply falls off the switch. Even gets pinched by a improper reconnection of the washer cabinet to the rear of the machine.

checking that now first it wouldn't fill n went straight to agitate so I took the line out n blew in the line and the switch put it back together I got the water to fill but wouldn't agitate but is spins n drains now it won't stop filling or agitate other then that it does what it suppose to do

I LOVE THIS GUY !

Awesome video thanks

@DanWebster

6 жыл бұрын

Glad to help

just the fix thanks man

@DanWebster

6 жыл бұрын

Glad you could get it done Merry Christmas

thanks

@DanWebster

6 ай бұрын

glad to help

Thanks

@DanWebster

7 жыл бұрын

Glad to help

Keep it simple! thanks and Go bless brother!

Thanks!!!

Thanks a lot brother. I appreciate the vid

@DanWebster

4 жыл бұрын

Glad to help

Easy fix . Made my day end of lesson hahahahahah

@DanWebster

7 ай бұрын

I made this video for my grandson. Glad to help. You and 151000 seem to agree Thanks.

Thank you !

I checked the line no bubbles so no hole ill put it back n make sure its not crimped figuring the cause is harder then the repair when I blow in the switch it clicks when I stop blowing in it the part inside swinging back