Attention to detail. Great work! 75-80 in. lbs. on terminal nuts.

The usual outstanding JEEPARMY video! 🔥

Nice install! I'm eying doing this on my TJ to get some more airflow. Love the HF shots too!

@JeepArmyUSA

3 жыл бұрын

Thank you. That was my goal too and looks minimalistic and cleaner upfront

Freshhh! Clean install man! Hell yeah!

@JeepArmyUSA

4 жыл бұрын

Hell ya bro, lovin this new setup.

Thank you, very well done. I need to do the same with my Z10.

Great video, waaay better than the WARN video. Great job!

@JeepArmyUSA

4 жыл бұрын

Thank you man!

Thanks alot for this video!

@JeepArmyUSA

3 жыл бұрын

Thanks for checking it out

Nice vid. Wondering if this is the same process for Zeon 12? My mount is for inside of bumper and not sure if it’ll fit without relocating that? Already bought winch but haven’t opened it up and investigated it yet

@JeepArmyUSA

2 жыл бұрын

I think it’s like this for all zeon models. Let us know whenever you investigate yours

@Jaydayallday

2 жыл бұрын

@@JeepArmyUSA sounds good

How did you run "in cab winch buttons" like you stated in the video? Is there a separate kit for that?

Great video! Looks very nice and slim. What did you put on the upper side instead of the bulky empty control pack?

@JeepArmyUSA

4 жыл бұрын

Thank you 🙏🏽 and it’s an Innovative JK Products Warn Zeon Winch Cover www.innovativejkproducts.com/shop/warn-zeon-winch-cover/

@JeepArmyUSA

4 жыл бұрын

There’s better pics of it on my IG @jeeparmyusa

@AEsco48

3 жыл бұрын

@@JeepArmyUSA Cant find this product online or the pic on your IG

@MrMrsregor

2 жыл бұрын

@@AEsco48 I can’t find them ether. Maybe they no longer make them.?.

@JeepArmyUSA

2 жыл бұрын

Looks like they no longer carry it. Give them a call.

What happens the port for the wired remote control. Can it stay with the winch or does it need to go into the engine bay with the control pack... Don't want to have to open engine bay to plug in... Any options?

@JeepArmyUSA

3 жыл бұрын

The port can be extended to desired location, a wireless remote receiver can be used, or what I’m doing is snipping off the port and wiring in-cab switches.

What size braided wire loom did you use for the 3 large gauge wires running to the winch ?

@JeepArmyUSA

2 жыл бұрын

It was either 3/4 or 3/8. Best thing to do is measure the cable first to be sure. I can say for sure that I got that braided sleeving from the Alex Tech Store on Amazon. I got 25’ of 3/4 and 25’ of 3/8

Did you notice any lower engine coolant temps as a result?

@JeepArmyUSA

3 жыл бұрын

Maybe just a tad bit but that winch controller wasn’t really blocking the rad that much to begin with. And definitely no change while slow wheelin. It is nice getting the controller out of the elements but now it’s also in a hot engine bay so that’s the trade off. I would still do this mod over again. I like the simplicity of it, Less is more kinda thing.

This is a great video, thank you! Did you ever make a cover ?

@JeepArmyUSA

Жыл бұрын

Thanks and a cover for which part exactly?

@sreyes1103

Жыл бұрын

@@JeepArmyUSA oh in the video you had mentioned you were thinking about making a cover for the box/solenoid itself.

@sreyes1103

Жыл бұрын

also if i were to do this same process then mount the solenoid in the grill somewhere, do you know if its can be exposed to water, say driving in rain?

@JeepArmyUSA

Жыл бұрын

No I decided not to make a cover because those connections are covered by those rubber boots and it’s been fine. I would keep it out of the rain for sure and mount it somewhere high and dry in the engine bay and away from the engine

@sreyes1103

Жыл бұрын

@@JeepArmyUSA Thank you!

what half doors are those i been really wanting some

@JeepArmyUSA

3 жыл бұрын

Mopar half doors.I really like them

Where did you get those particular terminal boots for the wire ends?

@JeepArmyUSA

3 жыл бұрын

Those boots came with the Warn kit

@user-te8lw2xo9m

3 жыл бұрын

@@JeepArmyUSA thanks I’ll have to contact them as my kit did not come with them.

@JeepArmyUSA

3 жыл бұрын

Just fyi, they’re a pain to get on. In hind sight I should have used some lube to slide them on.

@user-te8lw2xo9m

3 жыл бұрын

@@JeepArmyUSA got it. Thanks for the info.

Are you wheeling any more?

@JeepArmyUSA

3 жыл бұрын

Yes

Where can i purchase long cable

@JeepArmyUSA

Жыл бұрын

www.warn.com/control-pack-relocation-kit-89960 this is what I used for my model winch. Yours could be different. But essentially I ordered it from warn’s website

Your title should have been Warn Zeon Relocation Kit Install for JEEP...thanks anyway!

@JeepArmyUSA

4 жыл бұрын

This control pack relocation kit is for any vehicle running a Warn zeon winch. If a Toyota Tacoma or 4Runner was running a zeon winch, they too could run this control pack relocation kit. Thanks for watching!

I just have one question, Why?

@JeepArmyUSA

Жыл бұрын

Better air flow to to Rad and get controller out of the weather

Why not just remove the top tie plate instead of unspooling all the rope?

@JeepArmyUSA

3 жыл бұрын

You have to unspool to make enough room to get to the fasteners that secures the top plate. It doesn’t seem like you would have to but I tried without unspooling, and there wasn’t enough room to reach the fasteners.

@singlesidedfangz

3 жыл бұрын

@@JeepArmyUSA Yep I get that, I'm referring to the torx screws that hold down the tie plate (the bracket you unscrewed the controls from comes off too) instead of starting with the "hidden screws". Then could unbolt the control box (screws no longer hidden) from it and put the tie plate back on with the 4 screws. Most videos do what you did, when there are 4 screws that come right out on the tie plate. Not sure if there's a reason for that, but seems way easier. Tx

@singlesidedfangz

3 жыл бұрын

the Tie Plate is the bracket you leave on the winch, which becomes the top when the control box is gone. The control box bolts to the Tie Plate, the Tie Plate to the winch.

@JeepArmyUSA

3 жыл бұрын

I see what you mean. To me, doing it this way would be easier to follow and come across less daunting through the camera. I wanted to disassemble in sections if you will.

@singlesidedfangz

3 жыл бұрын

@@JeepArmyUSA Yep...just did mine and removing the top plate worked fine. My winch is in a bumper and I only have access on the top, removing a major PITA. For those that have the same situation, removing the top plate works like a charm with the added benefit of not having to unspool the line. tx for the video